2008 Toyota Tundra Owners Manual - Page 194

07 11.20 Headlights and turn signals (without automatic light control system) HEADLIGHTS To turn on the following lights: Twist the headlight/turn signal lever knob. Position 1-Parking, tail, license plate and instrument panel lights To turn them on again, turn the engine switch to the "ON" position or actuate the headlight switch. If you are going to park for over one week, make sure the headlight switch is off. The timing for the headlights turning off can be changed. For details, contact your Toyota dealer. LS15028a For Canada-The tail light indicator (green light) on the instrument panel will tell you that the tail lights are on. Position above 2-Headlights and all of the NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. For the U.S.A. For the U.S.A.-The headlight low beam indicator light (green light) on the instrument panel will tell you that the low beams are on. Automatic light cut off system The lights automatically turn off after 30 seconds when any of the doors is opened and closed with the engine switch in the "ACC" or "LOCK" position and the lever at position 2. The lights also automatically turn off when the driver's door is opened with the lever at position 1. If the doors are locked by the wireless remote control transmitter, the lights automatically turn off immediately. LS15027 For Canada 164 2008 TUNDRA from Apr. '08 Prod. (OM34477U)