2008 Toyota Tundra Owners Manual - Page 195

07 11.20 Daytime running light (DRL) system (on some models) The Daytime Running Light (DRL) system can make it easier for others to see the front of your vehicle during the day. The DRL system can be helpful in many different driving conditions, but they can be especially helpful in the short periods after dawn and before sunset. The DRL system will make your front turn signal lights come on when: LS15025a LS15026a D The engine switch is on with the engine running. D The knob is in the "OFF" position or position 1. D The parking brake is released. To turn off the DRL system, twist the knob to position 2, flashing the high beam headlights or turn the engine switch to the "ACC" or "LOCK" position. High−Low beams-For high beams, turn the headlights on and push the lever away from you (position 1). Pull the lever toward you (position 2) for low beams. The headlight high beam indicator light (blue light) on the instrument panel will tell you that the high beams are on. Flashing the high (position 3)-Pull the back. The high beam when you release the beam headlights lever all the way headlights turn off lever. TURN SIGNALS To signal a turn, push the headlight/ turn signal lever up or down to position 1. The engine switch must be in the "ON" position. The lever automatically returns after you make a turn, but you may have to return it by hand after you change lanes. To signal a lane change, move the lever up or down to the pressure point (position 2) and hold it. If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. You can flash the high beam headlights with the knob turned to "OFF". 165 2008 TUNDRA from Apr. '08 Prod. (OM34477U)