2008 Toyota Tundra Owners Manual - Page 292

07 11.20 Cruise control When parking, firmly apply the parking brake to avoid inadvertent creeping. To set: Fully depress the parking brake pedal. For better holding power, first depress the brake pedal and hold it while setting the parking brake. To release: Depress the parking brake pedal once again. To remind you that the parking brake is set, the parking brake reminder light in the instrument panel remains on until you release the parking brake. The cruise control is designed to maintain a set cruising speed without requiring the driver to operate the accelerator. Cruising speed can be set to any speed above 40 km/h (25 mph). Within the limits of the engine's capabilities, cruising speed can be maintained up or down grades. However, changes in vehicle speed may occur on steeper grades. XS17022 CAUTION D To help maintain maximum control of your vehicle, do not use the cruise control when driving in heavy or varying traffic, or on slippery (rainy, icy or snow−covered) or winding roads. TURNING THE SYSTEM ON AND OFF To turn the cruise control on, press the "ON−OFF" button. The "CRUISE" indicator light on the instrument panel will come on to indicate that the cruise control is operational. Pressing the "ON−OFF" button again turns the system off. When the system is turned off, cruising speed must be reset when the cruise control is turned on again. When the engine switch is turned off, the system is also automatically turned off. To use the cruise control again, press the "ON−OFF" button again to turn it on. CAUTION Before driving, be sure the parking brake is fully released and the parking brake reminder light is off. D Be careful about vehicle speed as it may increase when driving downhill with the cruise control on. 262 2008 TUNDRA from Apr. '08 Prod. (OM34477U)