2008 Toyota Tundra Owners Manual - Page 293

07 11.20 CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. XS17023 Bring your vehicle to the desired speed, push the lever down in the " −SET" direction and release it. This sets the vehicle at that speed. If the speed is not satisfactory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. If you need acceleration-for example, when passing-depress the accelerator pedal enough for the vehicle to exceed the set speed. When you release it, the vehicle will return to the speed set prior to the acceleration. CANCELLING THE CRUISE CONTROL The cruise control may be temporarily cancelled by the driver or by the system itself under certain circumstances. Temporary cancellation allows the set cruising speed to remain in memory. The cruise control can be temporarily cancelled by doing the following: SETTING THE CRUISING SPEED 5−speed models-The transmission must be in the "D" position or the shift range position must be in "4" (fourth range) or "5" (fifth range) in "S" mode before you set the cruising speed. 6−speed models-The transmission must be in the "D" position or the shift range position must be in between "4" (fourth range) and "6" (sixth range) in "S" position before you set the cruising speed. D Pulling the lever in the "CANCEL" direction and releasing it D Depressing the brake pedal Under certain circumstances, the cruise control is temporarily cancelled: 263 2008 TUNDRA from Apr. '08 Prod. (OM34477U)