2008 Toyota Tundra Owners Manual - Page 434

07 11.20 -Outside temperature and cruise information display The outside temperature display and cruise information display indicates the following information. Every time you push the "INFO" button, the display toggles through this information. 1. Outside temperature 2. Average fuel consumption 3. Instantaneous fuel consumption 4. Driving range 5. Display off The displayed values in the cruise information display indicate general driving conditions. Accuracy varies with driving habits and road conditions. To set the unit, push the "SETUP US/M" button until the desired unit display appears. When the engine switch is on, the last previously used mode displayed just before the engine switch is off will appear. 1. Outside temperature ("OUTSIDE _F" or "OUTSIDE _C") The outside temperature display indicates the outside air temperature. The displayed temperature ranges from −40_F (−40_C) up to 122_F (50_C). If an abnormality exists in the connection of the outside air temperature sensor F C") will appear on the display. If "−−−_F C") appears on the display, contact your Toyota dealer. There may be a case that "−−−_F C") appears momentarily when the engine switch is quickly turned to the "ON" position. It is normal if it goes out soon. 2. Average fuel consumption MPG" or "AVG L/100 km") ("AVG XS10004e Average fuel consumption is calculated and displayed based on total driving distance and total fuel consumption with the engine running. The displayed value is updated about every 10 seconds. To reset the calculation, push the "SELECT RESET" button about 2 second. 404 2008 TUNDRA from Apr. '08 Prod. (OM34477U)