2008 Toyota Tundra Owners Manual - Page 54

07 11.20 To lock and unlock all doors, push the switches of the transmitter slowly and securely. To lock: Push the " " (lock) switch. All the doors are locked simultaneously. At this time one beep will be heard, and the turn signal lights flash once. Check to see that all the doors are securely locked after locking. If any of the doors is not securely closed, locking cannot be performed by the " " (lock) switch and a beep will sound continuously for 10 seconds. However, if the key is in the engine switch, a beep will not sound. To stop the beep, close all the doors securely or push the " " (unlock) switch. The beep and flashing turn signal lights can be disabled. If your vehicle is equipped with the multi −information display (For further information, see "Multi −information display" on page 187 in Section 1−6.), these can be changed by yourself. For details, contact your Toyota dealer. To unlock: Push the " " (unlock) switch once to unlock the driver's door alone. Pushing the switch twice within 3 seconds unlocks all the doors simultaneously. Each time the " " (unlock) switch is pushed, two beeps will be heard, and the turn signal lights flash twice. This double switch operation to unlock all the doors can be changed to a single switch operation. If your vehicle is equipped with the multi −information display (For further information, see "Multi −information display" on page 187 in Section 1−6.), it can be changed by yourself. For details, contact your Toyota dealer. When you unlock all the doors using the wireless remote control, the Illuminated entry system, interior lights, personal lights and cargo lamp will be activated. (For further information, see "Interior lights" on page 170, "Personal lights" on page 171, "Illuminated entry system" on page 173 and "Cargo lamp" on page 174 in Section 1 −5.) You have 60 seconds to open a door after using the wireless remote unlock feature. If a door is not opened by then, all the doors will be automatically locked again. The time for automatic door lock function can be changed. If your vehicle is equipped with the multi −information display (For further information, see "Multi −information display" on page 187 in Section 1−6.), it can be changed by yourself. For details, contact your Toyota dealer. If the " " (lock) or " " (unlock) switch is kept pressed in, the locking the unlocking operation is not repeated. Release the switch and then push again. 24 2008 TUNDRA from Apr. '08 Prod. (OM34477U)