2008 Toyota Tundra Owners Manual - Page 544

07 11.20 Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. CAUTION D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. D Have the wheel nuts tightened with a torque wrench to the following torques, as soon as possible after changing wheels. Retighten the wheel nuts within 160 km (100 miles) of driving. Otherwise, the nuts may loosen and the wheels may fall off, which could cause a serious accident. Due to the higher torque specification for these wheel nuts, if in doubt about the correct tightness, have them checked by your Toyota dealer or at a service station. Taper type (Steel wheels) Flat washer type (Aluminum wheels) XS40047 514 2008 TUNDRA from Apr. '08 Prod. (OM34477U)