2008 Toyota Tundra Owners Manual - Page 81

07 11.20 1. SEAT POSITION ADJUSTING LEVER Hold the center of the lever and pull it up. Then slide the seat to the desired position with slight body pressure and release the lever. 2. SEATBACK LEVER ANGLE ADJUSTING CAUTION Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the driver and the front passenger are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt. In the event of a frontal collision, the more the seat is reclined, the greater the risk of death or serious injury. Lean forward and pull the lever up. Then lean back to the desired angle and release the lever. 3. DRIVER'S SEAT CUSHION ADJUSTING KNOB ANGLE To change the angle of the seat cushion on the front side, turn the knob either way. 4. DRIVER'S SEAT HEIGHT ADJUSTING LEVER To change the height of the seat, pull up or push down the lever. 5. DRIVER'S SEAT LUMBAR SUPPORT ADJUSTING SWITCH Push the switch on either side. The amount of lumbar support will change while the switch is pushed. XS13145b Bench seats (Regular cab models) 51 2008 TUNDRA from Apr. '08 Prod. (OM34477U)