2008 Toyota Tundra Owners Manual - Page 95

07 11.20 Armrest (Crew Max models) Rear center head restraint and front center head restraint (bench seats)-When an occupant sits on the center position of the rear seats (Double cab and Crew Max models) or the front seats (bench seats), always pull up the center head restraint to the lock position. The head restraint is most effective when it is close to your head. Therefore, using a cushion on the seatback is not recommended. Seat heaters XS13207 XS13100c CAUTION D Adjust the center of the head restraint so that it is closest to the top of your ears. To use the armrest, pull it down as shown in the illustrations. D After adjusting the head restraint, make sure it is locked in position. NOTICE To prevent damage to the armrest, avoid putting heavy loads on it. To turn on the seat heater, move the dial upward ("L" dial for the left front seat or "R" dial for the right front seat). At this time, the indicator light will illuminate to indicate the seat heater is operating. Move the dial upward or downward to adjust to the desired temperature. To turn it off, move the dial downward until it stops. When the seat heater is not in use, move the dial fully downward. The engine switch must be in the "ON" position to operate seat heaters. D Do not drive with the head restraints removed. 65 2008 TUNDRA from Apr. '08 Prod. (OM34477U)