2009 Toyota FJ Cruiser Owners Manual - Page 301

4-1. Maintenance and care n Aluminum wheels (if equipped) Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the point. n Bumpers and side moldings Do not scrub with abrasive cleaners. n To prevent deterioration and body corrosion l Wash the vehicle immediately in the following cases: After driving near the sea coast After driving on salted roads If you see coal tar or tree sap on the paint surface If you see dead insects or insect droppings on the paint After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances • If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface l If the paint is chipped or scratched, have it repaired immediately 4 CAUTION n Caution about the exhaust pipe Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns. Maintenance and care NOTICE n To protect your vehicle's painted surfaces Do not use organic cleaners such as benzene or gasoline. n Cleaning the exterior lights l Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. l Do not apply wax on the surfaces of the lights. Wax may cause damage to the lenses. 275