2009 Toyota Matrix Navigation Manual
2009 Toyota Matrix Manual
2009 Toyota Matrix manual content summary:
- 2009 Toyota Matrix | Navigation Manual - Page 1
Customer Experience Center 1-800-331-4331 2009 Navigat ion Syst em Quick Ref erence Guide MN 00505-NAV09-MAT Printed in USA 12/ 07 - 2009 Toyota Matrix | Navigation Manual - Page 2
provided using voice 3 4 LIMITATIONS OF THIS QUICK REFERENCE GUIDE This Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We - 2009 Toyota Matrix | Navigation Manual - Page 3
Settings. DISPLAY/TILT Button Adjust the contrast, brightness or turn off the screen. Change the angle of the screen for best viewing. AUDIO Button Set the radio station presets, adjust the balance and tone controls. È MENU Button Access Voice Guidance Volume, Select User, My Places, Setup and - 2009 Toyota Matrix | Navigation Manual - Page 4
followed by and move to step 3. To change Search Area, and move to step 2. touch step 2 Select the appropriate Search Area, then touch OK to confirm the selection. step 3 Input the house number using the number keys. step 4 Touch and input the street name using the letter keys. to see all of - 2009 Toyota Matrix | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Use or to scroll up or down one page if necessary. Touch bar appears, the route has been selected. Touch to confirm your selection. step 10 If necessary, use the arrow keys to adjust the position on the map to put you closer to your destination. Touch to - 2009 Toyota Matrix | Navigation Manual - Page 6
button followed by icon to access points of interest by name. step 2 Touch . step 3 Input the POI name using the letter keys and then touch . step 4 Use or to scroll up or down one page if necessary. Touch the desired selection. step 5 Select the desired Route Preference . and then - 2009 Toyota Matrix | Navigation Manual - Page 7
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by the icon to access the points of interest by category. step 2 Touch . step 3 Touch the icon to search for points of interest - 2009 Toyota Matrix | Navigation Manual - Page 8
DESTINATION INPUT - TELEPHONE NUMBER BUSINESS OR REGISTERED MEMORY POINTS step 1 Press the DEST panel button followed by the icon. step 2 Input the area code and telephone number using the number keys icon. It is not followed by the necessary to dial "1." step 3 Select the business or - 2009 Toyota Matrix | Navigation Manual - Page 9
you are in the desired Search Area. Touch the icon to begin address input. step 4 Input the house number using the number keys. step 5 Touch and input the street name using the letter keys. Touch to see all of the available options. step 6 Touch or select from a previously registered city - 2009 Toyota Matrix | Navigation Manual - Page 10
REGISTER HOME step 7 Touch the desired city. step 8 If necessary use the arrow keys to adjust the position on the map. Touch to confirm the position. step 9 at the top left of the Touch screen to change the home icon. step 10 Touch the desired icon for your home. step 11 Touch - 2009 Toyota Matrix | Navigation Manual - Page 11
Quick 1 offers the shortest route by time; Quick 2 is the second fastest route. Short is the most direct route based upon driven mileage. * The system does not account for traffic signals or traffic flow. SCREEN PREFERENCES Single Map * Arrow * Freeway Information * Intersection Guidance * Selections - 2009 Toyota Matrix | Navigation Manual - Page 12
. Touch OK to confirm your selection. PRESS INFO > SCREEN SETTING Touch OFF to prevent the system from reverting to the map display. Once the screen transition is switched off, the audio or climate control screen (if equipped) will remain without reverting to the map display. Touch OK to confirm your - 2009 Toyota Matrix | Navigation Manual - Page 13
Based upon the distance traveled, the system will also provide an estimated time until arriving at your destination. The system can be customized to match your driving Stn. • Hospital • Dealer • Fire Stn. Touch to select the desired destination. Once selected, the system will provide a list of - 2009 Toyota Matrix | Navigation Manual - Page 14
NAVTRAFFIC ® XM NavTraf c® is an optional subscription service that can send traf c information gathered by a variety of sources to vehicles with Navigation Systems via XM's satellite network. Displayed traf c information can help your drive by providing freeway traf c and incident information in - 2009 Toyota Matrix | Navigation Manual - Page 15
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation D Display operation D Initial screen D Touch screen operation D Inputting letters and numbers/List screen operation D Function help D Map screen operation Current position display ...Screen scroll operation ...Switching the - 2009 Toyota Matrix | Navigation Manual - Page 16
can be done by touching "TILT". Each touch "TILT" will tilt the display to positions 1 , 2 , 3 and then back to 0 in the reverse order. If the engine switch is set at OFF, the display will automatically move back to position 0 . The display will automatically resume the previous position when the - 2009 Toyota Matrix | Navigation Manual - Page 17
screen will be displayed and the system will begin operating. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds - 2009 Toyota Matrix | Navigation Manual - Page 18
to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation - 2009 Toyota Matrix | Navigation Manual - Page 19
on the screen. To prevent damage to the screen, lightly touch buttons on the screen with the finger. When a button on the screen is touched, a beep sounds. Do not use objects other than the finger to touch the screen. INFORMATION D If the system does not respond to a touch on a touch screen button - 2009 Toyota Matrix | Navigation Manual - Page 20
can be input via the touch screen. D To input letters To display the alphabet keys, touch "A−Z" or " ". INFORMATION Keyboard layout can be changed. (See page 112.) Enter letters by touching the alphabet keys directly. Touching this button erases one letter. By holding this button, letters will - 2009 Toyota Matrix | Navigation Manual - Page 21
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9999, the system displays on the screen. 27 - 2009 Toyota Matrix | Navigation Manual - Page 22
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A To shift to the next or previous page. To scroll up or down one item at a time. This expresses a - 2009 Toyota Matrix | Navigation Manual - Page 23
BASIC FUNCTIONS Function help TYPE B Explanations for the functions of the "Destination", "Setup", "Menu" and "XM NavTraffic" screens can be viewed. "Dist. Sort": To sort in the order of distance - 2009 Toyota Matrix | Navigation Manual - Page 24
" button. While driving, the current vehicle direction until the finger is removed. A street name, city system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page 118. INFORMATION When the one−touch scroll feature is used - 2009 Toyota Matrix | Navigation Manual - Page 25
point on the map can be set as a destination using the one−touch scroll function. D To register the cursor position as a memory point Memory point registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and - 2009 Toyota Matrix | Navigation Manual - Page 26
BASIC FUNCTIONS To change the icon or name, etc., see " - Editing memory points" on page 98. Up to 106 memory points can be registered. If there is an attempt - 2009 Toyota Matrix | Navigation Manual - Page 27
BASIC FUNCTIONS POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed on the top of the screen. MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. Touch "Info.". Touch "Info.". - 2009 Toyota Matrix | Navigation Manual - Page 28
BASIC FUNCTIONS - Switching the screens DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Any one of the screen configurations can be selected . 1. Touch this button to display the following screen. Touch "Info.". - 2009 Toyota Matrix | Navigation Manual - Page 29
BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 35.) : To display the dual map screen. (See page 36.) : To display the compass mode screen. (See page 36.) : To display the turn list screen. (See page - 2009 Toyota Matrix | Navigation Manual - Page 30
The destination mark is displayed in the direction of the destination. When driving refer to the longitude and latitude coordinates, and the compass, to make procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 120.) 4. Changing the orientation of - 2009 Toyota Matrix | Navigation Manual - Page 31
changes normally. By continuing to touch the button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving area which is not covered by the foot print map, the screen scale automatically changes to 150 feet ( - 2009 Toyota Matrix | Navigation Manual - Page 32
is displayed. If the map is displayed by a split screen, the map will change into a single map display. Details of POIs in some buildings may be displayed. the building name. You can see details of the selected POIs. 2. Using the eight−direction arrow, move the cursor to the position of the - 2009 Toyota Matrix | Navigation Manual - Page 33
BASIC FUNCTIONS - Orientation of the map " North−up screen " Heading−up screen The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. North−up symbol Regardless of the direction - 2009 Toyota Matrix | Navigation Manual - Page 34
BASIC FUNCTIONS 40 - 2009 Toyota Matrix | Navigation Manual - Page 35
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search D Quick reference ("Destination" screen) D Destination search Selecting the region to search ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI*" ... - 2009 Toyota Matrix | Navigation Manual - Page 36
be input by using the input keys...47 2 "POI" Select one of the many POIs (Points of Interest) that have already been stored in the system's database...51 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...59 7 "Map" A - 2009 Toyota Matrix | Navigation Manual - Page 37
29 11 "Del. Dest." Set destinations can be deleted...64 12 "Change" To change the selected region to search, touch this button...44 13 Quick access message will be displayed and will automatically switch to the setting screen. To use this function, it is necessary to set the "Quick Access" for each - 2009 Toyota Matrix | Navigation Manual - Page 38
"DEST" button. SELECTING THE REGION TO SEARCH ON THE INPUT SCREEN Change the selected region in order to set a destination from a different region by using "Address", "POI", "Freeway Ent./Exit" or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States - 2009 Toyota Matrix | Navigation Manual - Page 39
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in - 2009 Toyota Matrix | Navigation Manual - Page 40
message will be displayed and will automatically switch to the setting screen. To use this function, it is necessary to set "Home" for the memory point. touched even while driving. 2. Touch any of the quick access touch screen buttons on the "Destination" screen. The screen changes and displays the - 2009 Toyota Matrix | Navigation Manual - Page 41
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to input a destination by address. 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Inputting a house number and a street name 1. Touch numbers directly on the screen to input a house number. After - 2009 Toyota Matrix | Navigation Manual - Page 42
"Starting route guidance" on page 65.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, an address range on the screen can - 2009 Toyota Matrix | Navigation Manual - Page 43
, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 3. Touch the button of the desired city name - 2009 Toyota Matrix | Navigation Manual - Page 44
a street name" on page 47.) Touch the button of the desired city name. If the navigation has never been used, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on - 2009 Toyota Matrix | Navigation Manual - Page 45
the name of the Point of Interest. 3. Touch the button for the desired method. 2. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) When inputting the name - 2009 Toyota Matrix | Navigation Manual - Page 46
search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 52 - 2009 Toyota Matrix | Navigation Manual - Page 47
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2. Input the city name. 2. Touch the button of the desired city name. 3. Touch the button of the desired city name from the displayed list. 53 - 2009 Toyota Matrix | Navigation Manual - Page 48
SEARCH SELECTING FROM THE LAST 5 CITIES D Selecting from the categories Touch the button of the desired city name. If the navigation has never been used, no cities will be displayed on the screen. Touch "Category". If the desired POI category is on the screen, touch the name to display - 2009 Toyota Matrix | Navigation Manual - Page 49
DESTINATION SEARCH (b) Search by "Category" The destination can be set by selecting the search point and the POI category. INPUTTING THE CITY CENTER 1. Touch "Input City Center". 2. Input the city center name. Set the search point by the following method: 1. Input the city center 2. Set the - 2009 Toyota Matrix | Navigation Manual - Page 50
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". When an arrow facing the desired point is - 2009 Toyota Matrix | Navigation Manual - Page 51
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2009 Toyota Matrix | Navigation Manual - Page 52
screen will be displayed. By touching the button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See set a memory point as a destination using the phone number, the number must be registered previously. (See page 103.) 58 - 2009 Toyota Matrix | Navigation Manual - Page 53
changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers your desired memory point. The screen changes and displays the map location of the of the desired destination. The screen changes and displays the map location of the - 2009 Toyota Matrix | Navigation Manual - Page 54
D Deleting previous points 1. Touch "Delete" for the previous point button you want to delete. "Delete All": To delete all previous points in the system. The previous starting point and up to 100 previously set destinations are displayed on the screen. 3. Touch the button of the desired destination - 2009 Toyota Matrix | Navigation Manual - Page 55
to be set. INFORMATION Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 4. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route - 2009 Toyota Matrix | Navigation Manual - Page 56
If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect hyphen, when entering the destination. Freeways and interstates use an "I" (I−405). US highways use the state designation before the number (CA−118 - 2009 Toyota Matrix | Navigation Manual - Page 57
. 2. Touch "Coordinates" on the second page of the "Destination" screen. 5. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) "Input Name": An - 2009 Toyota Matrix | Navigation Manual - Page 58
set, a list will be displayed on the screen. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. INFORMATION Set destinations can also be deleted by touching "Route". (See " - Deleting - 2009 Toyota Matrix | Navigation Manual - Page 59
and set a new one. "Route Preference": To change the route preference. (See page 66.) "Info.": Type of the route and the distance 4 Distance of the entire route 3. To start guidance, touch "Guide". "3 Routes": To select the desired route from three possible routes. (See page 67.) "Route": To change - 2009 Toyota Matrix | Navigation Manual - Page 60
D To change the route before starting INFORMATION D Guidance can be suspended or resumed. (See "Suspending and resuming guidance" on page 92.) D If "Guide" is touched obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route - 2009 Toyota Matrix | Navigation Manual - Page 61
DESTINATION SEARCH 3 ROUTES SELECTION INFORMATION D Even if the "Allow Freeway" indicator is dimmed, the route cannot avoid including a freeway in some cases. D If the calculated route includes a trip by ferry, the route guidance shows a sea route. After you travel by ferry, the current vehicle - 2009 Toyota Matrix | Navigation Manual - Page 62
DESTINATION SEARCH 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 68 - 2009 Toyota Matrix | Navigation Manual - Page 63
D Route guidance screen D Typical voice guidance prompts D Distance and time to destination D Setting and deleting destination Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route Search condition ...Detour setting ...Route preference ...Starting route from - 2009 Toyota Matrix | Navigation Manual - Page 64
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the - 2009 Toyota Matrix | Navigation Manual - Page 65
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2009 Toyota Matrix | Navigation Manual - Page 66
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays - 2009 Toyota Matrix | Navigation Manual - Page 67
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 1 "Proceed about 4 miles to the traffic circle." "In a quarter of a mile - 2009 Toyota Matrix | Navigation Manual - Page 68
−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. 1 The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished - 2009 Toyota Matrix | Navigation Manual - Page 69
, the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the measured along the route is displayed. Travel time and arrival time is calculated based on the set vehicle speed information. (See page 111.) However, when - 2009 Toyota Matrix | Navigation Manual - Page 70
ROUTE GUIDANCE Setting and deleting destination - - Adding destinations Adding destinations and searching again for the routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". - 2009 Toyota Matrix | Navigation Manual - Page 71
ROUTE GUIDANCE - Deleting destinations 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few - 2009 Toyota Matrix | Navigation Manual - Page 72
If "No" is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate the route conditions of the route to the destination. 1. Touch - 2009 Toyota Matrix | Navigation Manual - Page 73
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 76 and 78.) 1. Touch "Route". 2. Touch "Detour". 79 - 2009 Toyota Matrix | Navigation Manual - Page 74
will search for the route based on the traffic congestion information received from XMr NavTraffic. For details, see "XMr NavTraffic" on page 120. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic - 2009 Toyota Matrix | Navigation Manual - Page 75
number of choices are provided on the conditions which the system uses to determine the route to the destination. - Starting .) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions that determine the route to the destination. 2. Touch "Start from Adjacent - 2009 Toyota Matrix | Navigation Manual - Page 76
can also set their location as a destination and use them for route guidance. D Selecting POIs to be Touch "Display POI Icon" to display a particular type of Point of Interest on the screen. Touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km - 2009 Toyota Matrix | Navigation Manual - Page 77
ROUTE GUIDANCE Touch "Other POIs" on the "Display POI icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols of those locations on the map screen. D To display the local POI list Points of Interest that are - 2009 Toyota Matrix | Navigation Manual - Page 78
one of the Points of Interest icons on the map screen as a destination and use it for route guidance. 1. Touch "Map View". 1. Directly touch the Point from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 76 and 78.) "Turn - 2009 Toyota Matrix | Navigation Manual - Page 79
. However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting - 2009 Toyota Matrix | Navigation Manual - Page 80
ROUTE GUIDANCE - Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the next destination. : To preview the route to - 2009 Toyota Matrix | Navigation Manual - Page 81
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2009 Toyota Matrix | Navigation Manual - Page 82
ROUTE GUIDANCE 88 - 2009 Toyota Matrix | Navigation Manual - Page 83
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use D Quick reference ("Menu" screen) D Quick reference ("Setup" screen) D Suspending and resuming guidance D Volume D User selection 4 90 91 92 93 94 D My places 96 Registering memory - 2009 Toyota Matrix | Navigation Manual - Page 84
reference ("Menu" screen) The "Menu" screen allows effective use of the navigation system. To display the "Menu" screen, push the "MENU" this screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...180 1 5 "Select User" Up to 3 different settings for different - 2009 Toyota Matrix | Navigation Manual - Page 85
, push the "MENU" button and touch "Setup". 1 "Unit of Measurement" The distance units "km" or "miles" can be selected...111 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...111 3 "Keyboard Layout" Key - 2009 Toyota Matrix | Navigation Manual - Page 86
12 "Calibration" Adjustment of the current vehicle position mark can be done manually...118 13 "Default" This touch screen button initializes all of the settings...110 route guidance, "Suspend Guidance" cannot be used. The screen will return to the current position map without route guidance. - 2009 Toyota Matrix | Navigation Manual - Page 87
"MENU" button. The voice guidance volume can be adjusted or switched off. 2. Touch "Resume Guidance". 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate - 2009 Toyota Matrix | Navigation Manual - Page 88
FUNCTIONS User selection INFORMATION During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km - 2009 Toyota Matrix | Navigation Manual - Page 89
ADVANCED FUNCTIONS D To register D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". 2. To register, touch "Yes". To return to the previous screen, touch "No" or . - 2009 Toyota Matrix | Navigation Manual - Page 90
ADVANCED FUNCTIONS My places - D To delete user Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 46, " - Destination search by Quick access" on page 46 and " - Destination search by Memory" - 2009 Toyota Matrix | Navigation Manual - Page 91
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. On this screen, the following operations can be performed. 1 Registers memory points (See " - Registering memory points" on page 97.) 2 Edits memory points (See " - Editing memory - 2009 Toyota Matrix | Navigation Manual - Page 92
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To edit registered information, see " - Editing memory points" on - 2009 Toyota Matrix | Navigation Manual - Page 93
ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 5. Touch the button to be edited. "Icon": To select icons to be displayed on the map. (See page 99.) "Quick Access": To set an attribute. Memory points with a set attribute can be used as a "Quick access" or "Home" - 2009 Toyota Matrix | Navigation Manual - Page 94
, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or "Home" touch screen button. (See " - Destination - 2009 Toyota Matrix | Navigation Manual - Page 95
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 2. To delete an attribute, touch "Yes - 2009 Toyota Matrix | Navigation Manual - Page 96
ADVANCED FUNCTIONS DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch "OFF". 2. - 2009 Toyota Matrix | Navigation Manual - Page 97
"My Places" on the "Menu" screen. 3. Touch "Delete". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 4. Touch the button to be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the - 2009 Toyota Matrix | Navigation Manual - Page 98
ADVANCED FUNCTIONS - Registering home If home has been registered, that information can be recalled by using the "Home" touch screen button on the "Destination" screen. (See " - Destination search by Home" on page 46.) 1. Push the "MENU" button. 2. Touch "My Places" on - 2009 Toyota Matrix | Navigation Manual - Page 99
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My - 2009 Toyota Matrix | Navigation Manual - Page 100
and/or area size of a registered area can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 7. Touch either or to change the size of the area to be avoided. 8. Touch "OK". INFORMATION D If a destination is input in the area to avoid or the route calculation cannot - 2009 Toyota Matrix | Navigation Manual - Page 101
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. 5. Touch the "OFF" on the "Edit Area to Avoid" screen. 6. Touch "OK". 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 107 - 2009 Toyota Matrix | Navigation Manual - Page 102
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. To show the name, touch "ON" on the "Edit Area to Avoid" screen. To not - 2009 Toyota Matrix | Navigation Manual - Page 103
Area Size" on the "Edit Area to Avoid" screen. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the button to be deleted. "Delete - 2009 Toyota Matrix | Navigation Manual - Page 104
"Delete Previous Points". 1. Push the "MENU" button. 4. Touch the button you want to delete. "Delete All": To delete all previous points in the system. 2. Touch "Setup". 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The - 2009 Toyota Matrix | Navigation Manual - Page 105
ADVANCED FUNCTIONS D Unit of Measurement Unit of Measurement can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D Estimated travel time The speed that is used for the calculation of the estimated travel time and the estimated arrival time can be set. 1. Push the " - 2009 Toyota Matrix | Navigation Manual - Page 106
displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position work. D It is possible to display up to 99 hours 59 minutes. Key layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. - 2009 Toyota Matrix | Navigation Manual - Page 107
. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. " "ABC" type 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. " "QWE" type The selected button is highlighted. 4. Touch "OK". 4. Touch the desired time zone. The selected button - 2009 Toyota Matrix | Navigation Manual - Page 108
current street name on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the icons to be displayed - 2009 Toyota Matrix | Navigation Manual - Page 109
ADVANCED FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To turn the "Display Building Shapes" on: 1. Push the "MENU" button. 2. Touch " - 2009 Toyota Matrix | Navigation Manual - Page 110
guidance in all modes can be heard. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch to display page - 2009 Toyota Matrix | Navigation Manual - Page 111
ADVANCED FUNCTIONS D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn the "Auto Voice - 2009 Toyota Matrix | Navigation Manual - Page 112
When the "Pop−up Message" is turned off, the following messages will not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Push the "MENU" button - 2009 Toyota Matrix | Navigation Manual - Page 113
ADVANCED FUNCTIONS POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either or to adjust the direction of the - 2009 Toyota Matrix | Navigation Manual - Page 114
. The XMr NavTraffic service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, an additional genuine Toyota satellite receiver and antenna must be purchased - 2009 Toyota Matrix | Navigation Manual - Page 115
been detected on the guidance route, it may be possible for you to select another route offered by the system. (See page 123.) 3 Traffic Voice Guidance Traffic information is provided using voice guidance. (See page 124.) 4 Show Free Flowing Traffic Freely flowing traffic is shown by the arrow on - 2009 Toyota Matrix | Navigation Manual - Page 116
XMr NavTraffic information has been received, the XMr NavTraffic information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow": Moderate traffic "Green": Freely flowing traffic " Freeway information - 2009 Toyota Matrix | Navigation Manual - Page 117
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2009 Toyota Matrix | Navigation Manual - Page 118
ADVANCED FUNCTIONS (c) Traffic Voice Guidance You can receive congestion information through voice guidance while being guided to your destination. (d) Show Free Flowing Traffic Freely flowing traffic is shown with the arrow. Touch "ON" of the "Traffic Voice Guidance". Touch "ON" of - 2009 Toyota Matrix | Navigation Manual - Page 119
(e) XMr NavTraffic text information When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. 1. Touch "Info." to display the "Traffic Information" screen. 2. Touch "Detail" to display detailed traffic event information. 125 - 2009 Toyota Matrix | Navigation Manual - Page 120
ADVANCED FUNCTIONS 126 - 2009 Toyota Matrix | Navigation Manual - Page 121
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions D Maintenance information Maintenance information setting ...Dealer setting ...D Calendar with memo Adding a memo ...Editing a memo ...Memo list ...D Screen adjustment D Screen setting D Beep setting D Selecting a language 5 128 128 130 132 - 2009 Toyota Matrix | Navigation Manual - Page 122
" - Dealer setting" on page 130.) If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color - 2009 Toyota Matrix | Navigation Manual - Page 123
": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter "PERSONAL - 2009 Toyota Matrix | Navigation Manual - Page 124
setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on the "Maintenance" screen. 5. Touch the button to be edited - 2009 Toyota Matrix | Navigation Manual - Page 125
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will - 2009 Toyota Matrix | Navigation Manual - Page 126
edit "Phone #" (telephone number) 1. Touch "Phone #" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 25.) Memos can also be used for route guidance if the memo has been - 2009 Toyota Matrix | Navigation Manual - Page 127
Memo": To add a memo. (See " - Adding a memo" on page 134.) "Mark f": To change the color of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date - 2009 Toyota Matrix | Navigation Manual - Page 128
memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 25.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to add a memo on the "Calendar" screen. 6. Enter text using the keys. Up to - 2009 Toyota Matrix | Navigation Manual - Page 129
specified period. (See page 136.) 5. Touch the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 134.) "Location": To change a registered location. (See " - Adding a memo" on page 134.) "Enter ": To set the registered location as a destination. (See "Starting route guidance - 2009 Toyota Matrix | Navigation Manual - Page 130
To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the deletion, touch "No". 2. Enter the period using the numeral keys. The period from January 1, 2007 through December 31, 2026 can be set for searching. 3. After setting the period, touch "OK". The - 2009 Toyota Matrix | Navigation Manual - Page 131
OTHER FUNCTIONS Screen adjustment You can adjust the brightness and contrast of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness adjustment The brightness or contrast of the screen can be adjusted depending on the - 2009 Toyota Matrix | Navigation Manual - Page 132
mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 138 - 2009 Toyota Matrix | Navigation Manual - Page 133
OTHER FUNCTIONS (a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen - 2009 Toyota Matrix | Navigation Manual - Page 134
OTHER FUNCTIONS (c) Delete personal data The following personal data can be deleted or returned to their default settings: D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings This function is - 2009 Toyota Matrix | Navigation Manual - Page 135
You can set a beep sound off. Selecting a language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. 1. Push the "INFO" button. 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off - 2009 Toyota Matrix | Navigation Manual - Page 136
çais" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 142 - 2009 Toyota Matrix | Navigation Manual - Page 137
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system D Quick reference D Using your audio system Some basics ...Radio operation ...CD player operation ...D Audio remote controls D Audio system operating hints 6 144 145 145 149 158 169 170 143 - 2009 Toyota Matrix | Navigation Manual - Page 138
AUDIO SYSTEM Quick reference 1 2 Function menu display screen To control the radio or CD player, touch the touch screen buttons. For details, see page 147. "AUDIO" button Push this button to display the audio control screen. For details, see page 146. " " button Push this button to insert or - 2009 Toyota Matrix | Navigation Manual - Page 139
the basic features of your audio system. Some information may not pertain to your system. Your audio system works when the engine switch is in "ACC" or "ON" position. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not - 2009 Toyota Matrix | Navigation Manual - Page 140
"PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. "AUDIO": Push this button to display touch screen buttons for audio system (audio control mode). You can select the function that enables automatic - 2009 Toyota Matrix | Navigation Manual - Page 141
AUDIO SYSTEM Touch them lightly and directly on the screen. The selected button is highlighted. INFORMATION D If the system does not respond the display using a glass cleaning cloth. The function buttons for radio and CD player operation are displayed on the screen when the audio control mode is - 2009 Toyota Matrix | Navigation Manual - Page 142
AUDIO SYSTEM D Tone and balance How good an audio program sounds to you is largely determined by the mix of Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another - 2009 Toyota Matrix | Navigation Manual - Page 143
to the radio NOTICE Never try to disassemble or oil any part of the CD player. Do not insert anything other than discs into the slot. The player is intended for use with 12 cm (4.7 in.) discs only. D AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed - 2009 Toyota Matrix | Navigation Manual - Page 144
the station band. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak - 2009 Toyota Matrix | Navigation Manual - Page 145
customer service agreement. Customers should have their radio ID ready; the radio ID can be found by selecting "channel 000" on the radio. For details, see the "Displaying the radio ID" that follows. All fees and programming are the responsibility of the XMr Satellite Radio and are subject to change - 2009 Toyota Matrix | Navigation Manual - Page 146
AUDIO SYSTEM Satellite tuner technology notice: Toyota's satellite radio tuners are awarded Type Approval Certificates from XMr Satellite Radio Inc. as proof of compatibility with the services ID when activating XMr service or when reporting a problem. If you select the "CH 000" using the "TUNE·SEEK - 2009 Toyota Matrix | Navigation Manual - Page 147
AUDIO SYSTEM D Channel category D Presetting a channel 1. Tune in the desired channel. Touch either "TYPEA" or "TYPE"" to go to the next or previous screen button. Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The - 2009 Toyota Matrix | Navigation Manual - Page 148
AUDIO SYSTEM D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the radio will step up or down the channel within the current channel category. Touch "TYPE SEEK". The radio will step up the channel within the current channel category. To scan - 2009 Toyota Matrix | Navigation Manual - Page 149
AUDIO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "TEXT" again, the display returns. 155 - 2009 Toyota Matrix | Navigation Manual - Page 150
take the suggested corrective action. The XMr antenna is not connected. Check whether the XMr antenna cable is attached securely. ANTENNA A short circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer for assistance. You have not subscribed to the XMr Satellite - 2009 Toyota Matrix | Navigation Manual - Page 151
. - Consult the dealer or an experienced radio/TV technician for help. Information to user Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk - 2009 Toyota Matrix | Navigation Manual - Page 152
CD player operation The CD player can play audio CDs, CD text, WMA discs and MP3 discs. D Audio CD, CD text ...161 D MP3/WMA disc ...164 For appropriate discs for this changer, see "Audio system operating hints" on page 170. (a) Inserting discs The engine switch must be set at "ACC" or "ON" position - 2009 Toyota Matrix | Navigation Manual - Page 153
the label faces down, the disc cannot be played. In this case, "CD Check" appears on the screen. NOTICE Do not obstruct the display while it is moving. It could damage your audio system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder - 2009 Toyota Matrix | Navigation Manual - Page 154
AUDIO SYSTEM (b) Ejecting discs (c) Playing a disc Push the " " button. The display will open and disc will be ejected. A disc can then be inserted. Push the "DISC·AUX" button if the disc are already loaded in the CD player. The "CD" screen will be displayed. 160 - 2009 Toyota Matrix | Navigation Manual - Page 155
AUDIO SYSTEM (d) Operating an audio CD D Playing an audio CD D Selecting a desired track Push the "AUDIO" button to display this screen. "TUNE·SEEK/TRACK" button: Use for a direct access to a desired track. Push the " " or " " button of "TUNE·SEEK/TRACK" and repeat it until the desired track - 2009 Toyota Matrix | Navigation Manual - Page 156
AUDIO SYSTEM D Searching for a desired track Touch the desired track number. The CD player will start playing the selected track from the beginning. : By touching this button, - 2009 Toyota Matrix | Navigation Manual - Page 157
AUDIO SYSTEM D Other functions "RAND": Use it for automatic and random selection. While the disc is playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel it, touch "RAND" once again. If a CD−TEXT disc is - 2009 Toyota Matrix | Navigation Manual - Page 158
AUDIO SYSTEM (e) Operating a MP3/WMA disc D Playing a MP3/WMA disc D Selecting a desired folder when the vehicle is not moving. Touch "FOLDER LIST". The folder list is displayed. Push the "AUDIO" button and touch a MP3/WMA disc number to display this screen. Touch the desired folder number. The - 2009 Toyota Matrix | Navigation Manual - Page 159
AUDIO SYSTEM D Selecting a desired file "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. "TUNE·SEEK/TRACK" button: Use for direct access to a desired file. Push the " " or " " button of " - 2009 Toyota Matrix | Navigation Manual - Page 160
AUDIO SYSTEM D Searching for a desired file Touch the desired file number. The CD player will start playing the selected file from the beginning. : By touching this button, - 2009 Toyota Matrix | Navigation Manual - Page 161
AUDIO SYSTEM D Searching for a desired folder D Other functions While the disc is playing, "SCAN" once again. After all the folders are scanned in one pass, normal play resumes. "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - While the - 2009 Toyota Matrix | Navigation Manual - Page 162
Check" will also appear on the screen. For appropriate discs for this player, see "Audio system operating hints" on page 170. If "CD Error" appears on the display: The following causes are possible. D There is a trouble inside the system Take your vehicle to your dealer. If an MP3/WMA - 2009 Toyota Matrix | Navigation Manual - Page 163
system changes the audio mode. To turn the audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until you hear a beep. Some parts of the audio system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls - 2009 Toyota Matrix | Navigation Manual - Page 164
use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. Radio reception Usually, the problem possible for two signals to reach your antenna at the same time. If this happens - 2009 Toyota Matrix | Navigation Manual - Page 165
with the Romeo and Joliet file system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise and playback errors, use the appropriate file extensions. D The - 2009 Toyota Matrix | Navigation Manual - Page 166
AUDIO SYSTEM 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.wma 005.mp3 Folder 3 006.mp3 D The play order of the compact WMA player, playback will begin more slowly than with a conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot be played using the DDCD (Double Density CD) system. 172 - 2009 Toyota Matrix | Navigation Manual - Page 167
AUDIO SYSTEM CARING FOR YOUR CD PLAYER AND DISCS D Your CD player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperature can keep your CD player from working. On hot days, use air Remove the discs from the CD player and wait until it dries. CD player Audio CDs D Use - 2009 Toyota Matrix | Navigation Manual - Page 168
AUDIO SYSTEM " Special shaped discs " Labeled discs NOTICE D Do not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system - 2009 Toyota Matrix | Navigation Manual - Page 169
AUDIO SYSTEM " Correct " Wrong D Handle discs carefully, especially when you are section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat, and direct sunlight. To - 2009 Toyota Matrix | Navigation Manual - Page 170
AUDIO SYSTEM folders and files. For the ISO 9660 format, there are two levels of regulations. Level 1: The file name is in 8.3 format (8 character file names, m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined - 2009 Toyota Matrix | Navigation Manual - Page 171
APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 7 178 180 177 - 2009 Toyota Matrix | Navigation Manual - Page 172
installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. 178 - 2009 Toyota Matrix | Navigation Manual - Page 173
position calibration correctly. D After repeating a change of direction by going forward and backward, or turning on a turntable in the parking lot. D When leaving a covered parking lot or parking garage. D When a roof carrier is installed. D When driving with tire chains installed. D When the - 2009 Toyota Matrix | Navigation Manual - Page 174
. The tire pressure also affects the diameter of the tires so please make sure the tire pressure of all four tires is correct. This system uses the maps of DENSO. © 2007 DENSO CORPORATION © 2006 NAVTEQ. All rights reserved. © 2006 Tele Atlas North America, Inc. All rights reserved. This material is - 2009 Toyota Matrix | Navigation Manual - Page 175
The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. TERMS AND CONDITIONS Personal Use Only. You agree to use this Data together with the navigation system for the solely personal, non− commercial purposes for which you were licensed, and - 2009 Toyota Matrix | Navigation Manual - Page 176
to that extent the above may not apply to you. Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations. 182 - 2009 Toyota Matrix | Navigation Manual - Page 177
Data was provided. ©2006 NAVTEQ − All rights reserved. If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional - 2009 Toyota Matrix | Navigation Manual - Page 178
to use the DATABASE according and subject to the terms and conditions of this Agreement. You shall not alter, obscure or remove any any part of the DATABASE without the prior written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system - 2009 Toyota Matrix | Navigation Manual - Page 179
OUT OF THIS AGREEMENT OR YOUR USE OF THE DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE due to the passage of time, changing circumstances, and due to the nature of the sources used. The DATABASE does not include or reflect - 2009 Toyota Matrix | Navigation Manual - Page 180
in part by the United States Government, then use, duplication on the Government's rights shall control. Contractor/manufacturer is Tele Atlas from any statute, law, regulation, or code, including any Sunshine use of the Licensed Products. In the event that such exemption is challenged under - 2009 Toyota Matrix | Navigation Manual - Page 181
use this information for solely personal, non−commercial purposes, and not for service bureau, time−sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble or reverse engineer - 2009 Toyota Matrix | Navigation Manual - Page 182
USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not - 2009 Toyota Matrix | Navigation Manual - Page 183
on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 1. Push the "MENU" button - 2009 Toyota Matrix | Navigation Manual - Page 184
vehicle during sudden braking or in an accident. D To reduce the chance of injury in the case of an accident or sudden stopping while driving, keep the It could damage your navigation system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become - 2009 Toyota Matrix | Navigation Manual - Page 185
area 1. Push the "MENU" button. 2. Touch "Map DVD". Make sure the version of the database on this screen. To display the disc coverage area, touch "Covered Area". Confirm the covered area on the screen. Contact your Toyota dealer to find out if there is a more recent update released. 191 - 2009 Toyota Matrix | Navigation Manual - Page 186
APPENDIX 192 - 2009 Toyota Matrix | Navigation Manual - Page 187
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching an intersection. These - 2009 Toyota Matrix | Navigation Manual - Page 188
MATRIX_Navi_U(L/O 0801) Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle - 2009 Toyota Matrix | Navigation Manual - Page 189
regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions - 2009 Toyota Matrix | Navigation Manual - Page 190
the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver's personal judgement. Use this system only in locations where it is legal to do so. Some - 2009 Toyota Matrix | Navigation Manual - Page 191
Quick guide - - Overview buttons and guidance screen 0U5111aX No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button "MENU" button "DISP/TILT" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2009 Toyota Matrix | Navigation Manual - Page 192
or the cursor position as a memory point. Touch this button to change the route. Touch this button to browse information about guidance route, to button to display the foot print map and the building information. Touch this button to change the screen mode. Page 128, 132, 138, 141 37 31 76, 78 82 - 2009 Toyota Matrix | Navigation Manual - Page 193
- Registering home 1 Push "DEST" button. 0U5115X 2 Touch . If home has not been registered, you can register it by touching . 3 There are 11 different methods to search your home. See "Destination search" on page 43. 4 Touch "Enter". The "Memory Point" screen is displayed. 7 - 2009 Toyota Matrix | Navigation Manual - Page 194
5 Touch "OK". Registration of home is complete. You can also register home by touching the "MENU" button. (See " - Registering home" on page 104.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) 8 - 2009 Toyota Matrix | Navigation Manual - Page 195
- Registering preset memory points (Quick access) 1 Push "DEST" button. 0U5115X 2 Touch one of the quick access buttons. You can set a memory point to one of the quick access buttons which has not been set. 3 There are 12 different methods to search preset memory points. See "Destination - 2009 Toyota Matrix | Navigation Manual - Page 196
memory points is complete. You can also register preset memory points by touching the "MENU" button. (See " - Registering memory points" on page 97.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) The registered points can be - 2009 Toyota Matrix | Navigation Manual - Page 197
12 different methods to search destinations. See "Destination search" on page 43. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 65 - 2009 Toyota Matrix | Navigation Manual - Page 198
" button. 0U5115X 2 Touch . The can be used if your home has been registered. (To register "Home", see " - Registering home" on page 104.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can