2009 Toyota Sienna Owners Manual - Page 105

1-3. Adjustable components (seats, mirrors, steering wheel) n Returning the third seats Push and hold the returning switch until the seat cushion is locked. A beep sounds twice to indicate the start of the operation. The beep sounds again twice when operation is completed. n When returning the tumbled second seat Once the seat is moved from the tumbled position to the folded-down position, it cannot be directly returned to the tumbled position again. Raise the seatback once if it is folded. n Power third seat l If the indicator light above the switches flashes three times when the folding/returning switch is pushed, the folding operation will not start. Make sure the engine switch is in the "LOCK" or "ACC" position and/or the automatic transmission selector lever is in P. l If any of the following conditions occur while the seat is operating, the seat operation will stop. The indicator light above the switches will flash three times and a beep will sound for about 10 seconds: • An object is caught between the seatback and seat cushion. • The stowing switch is released. • Other power third seat switch is pushed while operating the stowing switch. • The shift lever is moved from P when the engine switch is in the "ON" position. • The engine switch is turned to the "ON" position when the shift lever is in N. If the engine is started during operating, the seat operation may also be stopped. To continue the folding operation, the seatback must be returned to its original position first. 76