2009 Toyota Sienna Navigation Manual
2009 Toyota Sienna Manual
2009 Toyota Sienna manual content summary:
- 2009 Toyota Sienna | Navigation Manual - Page 1
2009 Navigation System Quick Reference Guide - 2009 Toyota Sienna | Navigation Manual - Page 2
16 17 17 18 18 LIMITATIONS OF THIS QUICK REFERENCE GUIDE This Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage - 2009 Toyota Sienna | Navigation Manual - Page 3
VEHICLE POSITION Mark Indicates the current position of the vehicle and its directional heading. NORTH UP OR COMPASS MODE Icon Touch to change the map display between North-up or Head-up perspectives. Ç Ó n Î ™ { £ä x DISPLAY Button Adjust the contrast, brightness or turn off the screen - 2009 Toyota Sienna | Navigation Manual - Page 4
the followed by panel button and move to step 2 Select the appropriate Search Area, then touch to confirm the selection. step 3. To change Search Area, without prefixes such as North or the letter N. The system will display all of the options available. 4 step 5 3 Use or to scroll up or down - 2009 Toyota Sienna | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Use or to scroll up or down one page if necessary. Touch the desired city. Then touch the desired street. step 8 Select the desired Route Preference by touching the . step 9 Select the desired Route Preference(s) for the trip. When the yellow bar appears - 2009 Toyota Sienna | Navigation Manual - Page 6
full and correct address in mind, so you can speak it as prompted. The system will ask for the state, city, and street name followed by the house number set the climate control fan on low or off to reduce background noise in the cabin. tip tip When saying street names, include North, South, East - 2009 Toyota Sienna | Navigation Manual - Page 7
DESTINATION INPUT BY ADDRESS - VOICE RECOGNITION step 3 Press the voice command button on the steering wheel and wait for the beep. After the beep say the appropriate state. step 4 Press the voice command button on the steering wheel and wait for the beep. After the beep say the appropriate - 2009 Toyota Sienna | Navigation Manual - Page 8
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY NAME step 1 Press the followed by panel button icon to access step 2 Input the POI name using the letter keys and then touch . points of interest by name. step 3 Use or to - 2009 Toyota Sienna | Navigation Manual - Page 9
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the panel button followed by the icon to access the points of interest by category. step 2 Touch the icon to search for points of interest in the - 2009 Toyota Sienna | Navigation Manual - Page 10
for a list. step 2 Press the voice command button on the steering wheel and wait for the beep. After the beep say, "Add to destination" or "Replace destination." To see a list say, "Show list." step 3 Touch the point of interest followed by and then . 9 - 2009 Toyota Sienna | Navigation Manual - Page 11
DESTINATION INPUT - TELEPHONE NUMBER BUSINESS OR REGISTERED MEMORY POINTS step 1 Press the panel button followed by the icon. step 2 Touch the icon to input telephone number. step 3 Input the area code and telephone number using the number keys - 2009 Toyota Sienna | Navigation Manual - Page 12
REGISTER HOME step 1 Press the followed by the panel button icon to step 2 Make sure that you are in home address. Touch and input the street name using the letter keys. Touch to see all of the available options. step 5 Use or to scroll up or down one page if necessary. Touch the desired - 2009 Toyota Sienna | Navigation Manual - Page 13
arrow keys to adjust the position on the map. Touch to confirm the position. step 9 Touch at the top left of the screen to change the home icon. step 10 Touch the desired icon for your home. step 11 Touch at the bottom of the screen. 12 - 2009 Toyota Sienna | Navigation Manual - Page 14
PAIRING step 1 Press the followed by panel button to pair a step 2 Touch . Bluetooth device. Quick Tip - Verify the Bluetooth cell phone has been approved by visiting www.Toyota.Letstalk.com. Quick Tip - Verify that the Bluetooth feature has been switched ON and is visible to other - 2009 Toyota Sienna | Navigation Manual - Page 15
. step 4 The call is active after changes to . Some Bluetooth equipped cell phones may or may not show battery or signal strength on the display. Touch system from understanding your commands. It is recommended that you reduce background noise (including passenger conversation and wind noise - 2009 Toyota Sienna | Navigation Manual - Page 16
the trip. For example, if Allow Toll Roads is not selected, the system will route over non-toll roads which may take longer to reach the destination options. Three screen preferences are available when the map is visible and four additional are available during route guidance only. Please refer - 2009 Toyota Sienna | Navigation Manual - Page 17
. PRESS INFO > SCREEN SETTING Touch to prevent the system from reverting to the map display. Once the screen transition is switched off, the audio or climate control screen (if equipped exit. * This feature is only available while in Route Guidance and travelling on a freeway or Toll Road. 16 - 2009 Toyota Sienna | Navigation Manual - Page 18
refer to the Navigation Owner's Manual for a complete description of this feature. * The system does not account for traffic panel button followed by to access four emergency destinations: • Police Stn. • Hospital • Dealer • Fire Stn. Touch the desired destination. Once selected, the system - 2009 Toyota Sienna | Navigation Manual - Page 19
to the Navigation Owner's Manual for additional information. NOTE ON VOICE RECOGNITION The navigation system voice recognition feature will compare the system database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available - 2009 Toyota Sienna | Navigation Manual - Page 20
MN 00505-NAV09-SIE Printed in the USA 06/08 - 2009 Toyota Sienna | Navigation Manual - Page 21
D Touch screen operation ...25 D Inputting letters and numbers/list screen operation ...25 D Function help ...29 D Map screen operation ...Current position display ...Screen scroll operation ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...29 29 30 34 37 37 39 21 - 2009 Toyota Sienna | Navigation Manual - Page 22
reverse order. If the engine switch is in the "LOCK" position, the display will automatically move back to position 0 . The display will automatically resume the previous position when the engine switch is in the "ACC" or "ON" position. INFORMATION Under extremely cold conditions, the display may - 2009 Toyota Sienna | Navigation Manual - Page 23
engine switch is in the "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake , the screen will change back to "CAUTION" screen and then change to the map screen - 2009 Toyota Sienna | Navigation Manual - Page 24
D Maintenance information This system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen - 2009 Toyota Sienna | Navigation Manual - Page 25
system is operated mainly by the touch screen buttons on the screen. To prevent damage to the screen, lightly can be changed. (See "D Input key layout" on page 110.) INFORMATION D If the system does not respond display is cold. D Under extremely cold conditions, the map may not be displayed and the - 2009 Toyota Sienna | Navigation Manual - Page 26
BASIC FUNCTIONS D To input letters To display the alphabet keys, touch "A−Z" or " D To input numerals and symbols To display the number keys and symbol keys, touch "0−9". ". Enter letters by touching the alphabet keys directly. Touching this touch screen button erases one letter. By holding this - 2009 Toyota Sienna | Navigation Manual - Page 27
at a time. This expresses a displayed screen position. INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. If appears to the right of the item name, the complete name is too - 2009 Toyota Sienna | Navigation Manual - Page 28
BASIC FUNCTIONS D Sorting The order of a list displayed on the screen can be rearranged. TYPE A TYPE B 1. Touch "Sort by". "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to the right - 2009 Toyota Sienna | Navigation Manual - Page 29
. Touch "?". The current vehicle position mark ( 1 ) appears in the center or bottom center of the map screen. A street name will appear on the bottom of set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically - 2009 Toyota Sienna | Navigation Manual - Page 30
) INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see "D Current position/ tire change calibration" on - 2009 Toyota Sienna | Navigation Manual - Page 31
using the one−touch scroll function. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference destination, "Add to " or "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a - 2009 Toyota Sienna | Navigation Manual - Page 32
touch "Mark", the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 96. Up to 106 memory points can be registered. If there is an attempt - 2009 Toyota Sienna | Navigation Manual - Page 33
touched, the position of the cursor is set as a destination. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To register this POI as a memory point, touch "Mark". (See - 2009 Toyota Sienna | Navigation Manual - Page 34
BASIC FUNCTIONS - Switching the screens DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Any - 2009 Toyota Sienna | Navigation Manual - Page 35
BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 35.) : To display the dual map screen. (See page 36.) : - 2009 Toyota Sienna | Navigation Manual - Page 36
left is the main map. The right side map can be edited by touching any specific point on the right side map. Information about the destination and current can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation of the map Touch "OK - 2009 Toyota Sienna | Navigation Manual - Page 37
Chicago, N.Y., L.A), you can switch to the foot print map on a scale of 75 feet (25 m). D To switch to the foot print map changes into when the map is the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving. - 2009 Toyota Sienna | Navigation Manual - Page 38
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 1. Touch "Info." while the foot print map is displayed. If the map is - 2009 Toyota Sienna | Navigation Manual - Page 39
BASIC FUNCTIONS - Orientation of the map " North−up screen " Heading−up screen The orientation of the map can be changed from north−up to heading−up by touching the orientation symbol at the top left of the screen. North−up symbol Regardless of the direction - 2009 Toyota Sienna | Navigation Manual - Page 40
BASIC FUNCTIONS 40 - 2009 Toyota Sienna | Navigation Manual - Page 41
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search 2 43 44 46 46 47 51 54 58 58 59 59 60 61 62 62 63 D Quick reference ("Destination" screen) ...42 D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination - 2009 Toyota Sienna | Navigation Manual - Page 42
memory points, see " - Registering memory points" on page 95.) ...58 6 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...58 7 "Map" A destination can be selected simply by touching the location on the displayed map - 2009 Toyota Sienna | Navigation Manual - Page 43
(interstate) entrance or exit can be entered...61 10 "?" Function help for the "Destination" screen can be viewed on this screen...29 11 "Change" To change the search area, touch this touch screen button...44 12 Quick access touch screen buttons One of 5 preset destinations can be selected by - 2009 Toyota Sienna | Navigation Manual - Page 44
from a different area by using "Address", "POI Name", "Freeway Ent./ Exit", or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 areas. (For map database information and updates, see "Map database information and updates - 2009 Toyota Sienna | Navigation Manual - Page 45
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search area All provinces and regions in - 2009 Toyota Sienna | Navigation Manual - Page 46
" for the memory point. (To register "Home", see page 102.) 2. Touch any of the quick access touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See "Starting route guidance" on page 63.) To use this - 2009 Toyota Sienna | Navigation Manual - Page 47
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to input a destination by address. 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Inputting a house number and a street name 1. Touch numerals directly on the screen to input a house number. After - 2009 Toyota Sienna | Navigation Manual - Page 48
"Starting route guidance" on page 63.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, an address range on the screen can - 2009 Toyota Sienna | Navigation Manual - Page 49
, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch screen button of the desired city - 2009 Toyota Sienna | Navigation Manual - Page 50
5 Cities". SELECTING FROM THE LAST 5 CITIES 2. Touch the touch screen button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 47.) Touch the touch - 2009 Toyota Sienna | Navigation Manual - Page 51
be displayed on the map screen. (See " - Display POI icons" on page 80.) 4. Touch the touch screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) When inputting the - 2009 Toyota Sienna | Navigation Manual - Page 52
from the nearest 5 cities 3. Select from the last 5 cities 3. Touch the touch screen button of the desired city name from the displayed list. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 52 - 2009 Toyota Sienna | Navigation Manual - Page 53
DESTINATION SEARCH SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". SELECTING FROM THE LAST 5 CITIES 2. Touch the touch screen button of the desired city name. Touch the touch screen button of the desired city name. If the navigation has not be used, no cities will be displayed - 2009 Toyota Sienna | Navigation Manual - Page 54
is not on the screen, touch "List All Categories" to list all POI categories. 3. Set the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set the search point via the map screen 4. Set the search point from any destination It is - 2009 Toyota Sienna | Navigation Manual - Page 55
search point is set at the current position, and the "POI Category" screen will be displayed. 2. Input the city center name. 3. Touch the touch screen button of the desired city center name. When an arrow facing the desired point is touched, the map scrolls in that direction. Releasing the finger - 2009 Toyota Sienna | Navigation Manual - Page 56
DESTINATION SEARCH SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. When an arrow facing the desired point is touched, the map scrolls in that direction. Releasing the finger from - 2009 Toyota Sienna | Navigation Manual - Page 57
not on the screen, touch "List All Categories" to list all POI categories. By touching the touch screen button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) "On Route": When the - 2009 Toyota Sienna | Navigation Manual - Page 58
changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers your desired memory point. The screen changes and displays the map location of of the desired destination. The screen changes and displays the map location of the - 2009 Toyota Sienna | Navigation Manual - Page 59
and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route - 2009 Toyota Sienna | Navigation Manual - Page 60
two intersecting streets which are located near the destination to be set. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2009 Toyota Sienna | Navigation Manual - Page 61
destination. Freeways and interstates use an "I" (I−405). US highways use the state designation before the number (CA−118). 5. Touch the touch screen button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference - 2009 Toyota Sienna | Navigation Manual - Page 62
latitude and the longitude. 4. When the input is finished, touch "OK". By touching the touch screen button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) 3. Input a telephone - 2009 Toyota Sienna | Navigation Manual - Page 63
displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. "Route Preference": To change the route preference. (See page 64.) "Info.": If this touch screen button is displayed on the top of the screen, touch the switch to view items such as name - 2009 Toyota Sienna | Navigation Manual - Page 64
guidance may not be available if there is no conditions in mind while driving. If a traffic sign on the road has been changed , the route guidance may provide incorrect information. 2. Select desired route preferences by touching each button on/off. When searching for a route, the system - 2009 Toyota Sienna | Navigation Manual - Page 65
Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended route. This route is indicated by an orange line. "Quick2": Alternative route. This route is indicated by a purple line. "Short": A route by which you can reach the destination in the shortest distance. This route - 2009 Toyota Sienna | Navigation Manual - Page 66
DESTINATION SEARCH 66 - 2009 Toyota Sienna | Navigation Manual - Page 67
to destination ...73 D Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Search condition ...Detour setting ...Route preference ...Starting route from adjacent road ...D Map view ...Display POI* icons ...Route overview - 2009 Toyota Sienna | Navigation Manual - Page 68
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway information screen will be displayed. This screen displays the distance to the next - 2009 Toyota Sienna | Navigation Manual - Page 69
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an entrance, exit, or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be - 2009 Toyota Sienna | Navigation Manual - Page 70
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. during guidance displays Touching - 2009 Toyota Sienna | Navigation Manual - Page 71
exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) 2 1 2 "Proceed about 5 miles." "In a quarter of a mile, right turn." "Right turn." (Beep sound only) 3 4 5 3 4 INFORMATION On freeways, interstates or other highways with higher speed limits, the voice guidance will be made - 2009 Toyota Sienna | Navigation Manual - Page 72
−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished - 2009 Toyota Sienna | Navigation Manual - Page 73
from the current position to each destination are displayed. 1. Touch this touch screen button to display the following screen. To switch to estimated arrival time. To switch to estimated travel time. Displayed while driving off the guidance route. The destination direction is indicated by an arrow - 2009 Toyota Sienna | Navigation Manual - Page 74
be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. . Reordered number of arrival is displayed on the right side of the screen. Touching "Undo" will cancel each selected order number - 2009 Toyota Sienna | Navigation Manual - Page 75
ROUTE GUIDANCE - Deleting destinations 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few - 2009 Toyota Sienna | Navigation Manual - Page 76
screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate the route conditions of the route to the destination. 1. Touch "Route". 2. Touch "Search - 2009 Toyota Sienna | Navigation Manual - Page 77
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 74 and 76.) 1. Touch "Route". 2. Touch "Detour". 77 - 2009 Toyota Sienna | Navigation Manual - Page 78
example of how the system would guide around a delay system. INFORMATION D When your vehicle is on a freeway, the detour distance selections are 5, 15, and 25 miles (km). D The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions - 2009 Toyota Sienna | Navigation Manual - Page 79
preference A number of choices are provided on the conditions which the system uses to determine the route to the destination. 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions which are to determine the route to the destination. 2. Touch "Start from - 2009 Toyota Sienna | Navigation Manual - Page 80
. "Local POI List": When searching for the nearest Point of Interest, touch this touch screen button. The system will list the points within 20 miles (32 km). (See page 81.) A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 112.) 80 - 2009 Toyota Sienna | Navigation Manual - Page 81
ROUTE GUIDANCE Touch "Other POIs" on the "Display POI Icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols at those locations on the map screen. D To display the local POI list Points of - 2009 Toyota Sienna | Navigation Manual - Page 82
to set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the . At this time, the distance from route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 74 and 76.) "Turn List - 2009 Toyota Sienna | Navigation Manual - Page 83
. However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to the starting point will be displayed - 2009 Toyota Sienna | Navigation Manual - Page 84
It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 miles (50 km). : To indicate the next destination. : To preview the route to the next - 2009 Toyota Sienna | Navigation Manual - Page 85
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2009 Toyota Sienna | Navigation Manual - Page 86
ROUTE GUIDANCE 86 - 2009 Toyota Sienna | Navigation Manual - Page 87
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use 4 D Quick reference ("Menu" screen) ...88 D Quick reference ("Setup" screen) ...89 D Suspending and resuming guidance ...90 D Volume ...91 D User selection ...92 D My places ...94 Registering memory - 2009 Toyota Sienna | Navigation Manual - Page 88
for the "Menu" screen can be viewed on this screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...270 5 "Select User" 1 6 "Setup" Enables various settings for the navigation system...89, 108 7 "My Places" Enables changes to "Memory points", "Home" and "Areas to - 2009 Toyota Sienna | Navigation Manual - Page 89
"km" or "miles" can be selected...109 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...109 3 "Keyboard Layout" Key layout can be changed...110 4 "Time Zone" The desired time zone can be selected...111 - 2009 Toyota Sienna | Navigation Manual - Page 90
OFF to display the pop−up message is possible...116 13 "Calibration" Adjustment of the current vehicle position mark can be done manually, or mis−calculation by changing tire will be adjusted...117 14 "Default" This touch screen button initializes all of the settings...108 15 "?" Function help for - 2009 Toyota Sienna | Navigation Manual - Page 91
The volume of the voice or turn off voice guidance can be adjusted. 2. Touch "Resume Guidance". 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate number - 2009 Toyota Sienna | Navigation Manual - Page 92
the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive /h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator will be highlighted. The system can memorize the following settings for up to - 2009 Toyota Sienna | Navigation Manual - Page 93
ADVANCED FUNCTIONS D To register D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". touch screen button that is already registered is touched, the following screen appears. To replace, touch "Yes". To cancel the replacement, touch "No" or . 93 - 2009 Toyota Sienna | Navigation Manual - Page 94
ADVANCED FUNCTIONS My places - D To delete user Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 46 and " - Destination search by Quick access" on page 46.) Registered areas are avoided at the - 2009 Toyota Sienna | Navigation Manual - Page 95
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. On this screen, the following operations can be performed. 1 Registers memory points (See " - Registering memory points" on page 95.) 2 Edits memory points (See " - Editing memory - 2009 Toyota Sienna | Navigation Manual - Page 96
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To edit registered information, see " - Editing memory points" on - 2009 Toyota Sienna | Navigation Manual - Page 97
ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 5. Touch the touch screen button to be edited. "Icon": To select icons to be displayed on the - 2009 Toyota Sienna | Navigation Manual - Page 98
Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. the vehicle approaches this point in the direction that has been set. 3. To replace the attribute, touch "Yes". To return to the previous screen, touch "No - 2009 Toyota Sienna | Navigation Manual - Page 99
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch " - 2009 Toyota Sienna | Navigation Manual - Page 100
ADVANCED FUNCTIONS DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch "OFF". 2. - 2009 Toyota Sienna | Navigation Manual - Page 101
ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. 1. Push the be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 101 - 2009 Toyota Sienna | Navigation Manual - Page 102
ADVANCED FUNCTIONS - Registering home If home has been registered, that information can be recalled by using the "Home" touch screen button on the "Destination" screen. (See " - Destination search by Home" on page 46.) 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. When - 2009 Toyota Sienna | Navigation Manual - Page 103
as for a destination search, or display the map of the area to be avoided. (See "Destination search" on page 43.) 5. Set the cursor in the center of the area to avoid, and touch "Enter". 103 - 2009 Toyota Sienna | Navigation Manual - Page 104
Touch "My Places" on the "Menu" screen. 6. Touch either or to change the size of the area to be avoided. 7. Touch "OK". INFORMATION D If a input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be - 2009 Toyota Sienna | Navigation Manual - Page 105
D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. 5. Touch the touch screen button to be edited. "Name": To edit the name of the area to avoid. The names can be displayed on the map. (See page 105.) "Location": To edit area location. (See page 106.) "Area Size": To - 2009 Toyota Sienna | Navigation Manual - Page 106
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. To show the name, touch "ON" on the "Edit Area to Avoid" screen. To not - 2009 Toyota Sienna | Navigation Manual - Page 107
" screen. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the touch screen button to be deleted. "Delete All": To delete all registered areas to avoid in the system - 2009 Toyota Sienna | Navigation Manual - Page 108
Previous Points". 1. Push the "MENU" button. 4. Touch the touch screen button you want to delete. "Delete All": To delete all previous points in the system. 2. Touch "Setup". 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The - 2009 Toyota Sienna | Navigation Manual - Page 109
ADVANCED FUNCTIONS D Distance unit Distance unit can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on "Set Speed" of the "Estimated Travel Time". INFORMATION This function is available only in English or Spanish. To switch language, see "Select language" on page 185. 4. Touch or to - 2009 Toyota Sienna | Navigation Manual - Page 110
along the guidance route. D The time shown on the screen may vary greatly depending on progress along the route, which may be affected by road conditions such as traffic jams, and construction work. D It is possible to display up to 99 hours 59 minutes. Key layout can be - 2009 Toyota Sienna | Navigation Manual - Page 111
. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. " "ABC" type 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. " "QWE" type The selected button is highlighted. 4. Touch "OK". 4. Touch the - 2009 Toyota Sienna | Navigation Manual - Page 112
on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D Screen layout function ( D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the icons to be - 2009 Toyota Sienna | Navigation Manual - Page 113
ADVANCED FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To turn the "Display Building Shapes" - 2009 Toyota Sienna | Navigation Manual - Page 114
ADVANCED FUNCTIONS D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Restrict. Notification" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then - 2009 Toyota Sienna | Navigation Manual - Page 115
modes can be heard. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio/video system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch to display page 2 of - 2009 Toyota Sienna | Navigation Manual - Page 116
to display page 3 of the "Setup" screen. When the "Pop−up Message" is turned off, following messages are not displayed. This message appears when the system is in the POI mode and the map scale is over 0.5 mile (800 m). 3. Touch "ON" of "Pop−up Message". The selected button is highlighted - 2009 Toyota Sienna | Navigation Manual - Page 117
FUNCTIONS D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 258. 117 - 2009 Toyota Sienna | Navigation Manual - Page 118
FUNCTIONS TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function will adjust the mis−calculation caused by the circumference difference between the old and new tires. If this procedure is not performed when tires are replaced, the current - 2009 Toyota Sienna | Navigation Manual - Page 119
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions D Maintenance information ...Maintenance information setting ...Dealer setting ...D Calendar with memo ...Adding a memo ...Editing a memo ...Memo list ...D Hands−free system (for cellular phone) ... 5 120 120 122 124 126 127 127 129 D Speech - 2009 Toyota Sienna | Navigation Manual - Page 120
122.) If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color will change to orange. 120 - 2009 Toyota Sienna | Navigation Manual - Page 121
"OIL FILTER": Replace engine oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF "SERVICE": Scheduled maintenance "AIR - 2009 Toyota Sienna | Navigation Manual - Page 122
setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on the "Maintenance" screen. 5. Touch the touch screen button - 2009 Toyota Sienna | Navigation Manual - Page 123
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will - 2009 Toyota Sienna | Navigation Manual - Page 124
Calendar with memo - D To edit "Phone #" (telephone number) 1. Touch "Phone #" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 24.) Memos can also be used for route - 2009 Toyota Sienna | Navigation Manual - Page 125
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2009 Toyota Sienna | Navigation Manual - Page 126
OTHER FUNCTIONS - Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 24.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to - 2009 Toyota Sienna | Navigation Manual - Page 127
Calendar" screen. 4. Touch the memo to be edited. 4. Touch the desired search condition to list the memos. "This Week": To display the list of memos for edit a memo. (See " - Adding a memo" on page 126.) "Location": To change a registered location. (See " - Adding a memo" on page 126.) "Enter ": To - 2009 Toyota Sienna | Navigation Manual - Page 128
OTHER FUNCTIONS D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 5. To delete and/or edit the memo, touch the desired memo button. "Delete All": To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the - 2009 Toyota Sienna | Navigation Manual - Page 129
pushing the telephone switch above, you can receive a call or hang up without taking your hands off the steering wheel. NOTICE Do not leave your cellular phone in the car. The temperature indoor may be high and damage the phone. INFORMATION In the following conditions, the system may not function - 2009 Toyota Sienna | Navigation Manual - Page 130
on unpaved road. (Too much road noise.) D Driving at high speed. D Windows are open. D If air−conditioning vents are turned towards the microphone. D The sound of the air−conditioning fan is loud. 2 Indicates the condition of Bluetoothr connection. "Blue" indicates an excellent connection to - 2009 Toyota Sienna | Navigation Manual - Page 131
or in the glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. Bluetooth is a trademark owned by Bluetooth SIG, Inc. When you sell your car: A lot of personal data is registered - 2009 Toyota Sienna | Navigation Manual - Page 132
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference - 2009 Toyota Sienna | Navigation Manual - Page 133
Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the conjunction with any other antenna or transmitter. (a) Enter a Bluetoothr phone To use the hands−free system, you need to enter your phone into the system. Once you have - 2009 Toyota Sienna | Navigation Manual - Page 134
the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". 4. Touch "Bluetooth∗" to display the "Bluetooth∗ Settings "Register" to connect your cellular phone to the system. ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. When this screen is displayed, - 2009 Toyota Sienna | Navigation Manual - Page 135
manually. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetoothr phone in a condition where connection can be established. Each time you touch "Auto Connect", auto connection will be switched phone. When the engine switch is in the " - 2009 Toyota Sienna | Navigation Manual - Page 136
the Bluetoothr phone If the Bluetoothr phone is disconnected with a poor reception from the Bluetoothr network when the engine switch is in the "ACC" or "ON" position, the system automatically reconnects the Bluetoothr phone. In this case, the connection result is not displayed. If the Bluetoothr is - 2009 Toyota Sienna | Navigation Manual - Page 137
numbers. This cannot be operated while driving. (iii) By dialed numbers You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is more than 5, the oldest number is deleted. This cannot be desired number from the list. Touch or push the steering wheel. switch of the 137 - 2009 Toyota Sienna | Navigation Manual - Page 138
calls You can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. Touch or push the steering wheel. switch of the 1. Touch "Call Log" to display "Outgoing Call" screen - 2009 Toyota Sienna | Navigation Manual - Page 139
on the left side of the number. D Unnoticed telephone number such as a public telephone is not memorized in the system. 3. Select the desired number from the list. 1. Touch "Speed Dial" to display "Speed Dial" screen. 2. Touch the desired number to call. You can change the page by touching - 2009 Toyota Sienna | Navigation Manual - Page 140
"After the beep, please say the name." You: "DAD." System: "DAD chosen, when ready, please briefly push the talk switch or push the off−hook switch to dial." You: Push the talk switch. System: "After the beep, please say "Dial"." You: "Dial." System: "Dialing the name." Now you are calling DAD. You - 2009 Toyota Sienna | Navigation Manual - Page 141
to change the entry to the next one. D Touch "Next" D Push the talk switch to say System: Push the talk switch. "After the beep, please say the number." You: "812387" System: "When ready, please briefly push the talk switch or push the off−hook switch to dial." You: Push the talk switch. System - 2009 Toyota Sienna | Navigation Manual - Page 142
giving a desired number. (vii) By POI call You: Push the talk switch. System: "Say numbers, pound, or star." You: "1234." System: "1234." "Push the talk switch." You: Push the talk switch. System: "Send? Say Yes or No." You: "Yes." System: "Sending." Now you are sending the tone. You can call by - 2009 Toyota Sienna | Navigation Manual - Page 143
(c) Receive on the Bluetoothr phone (d) Talk on the Bluetooth r phone When a call is received, this screen is displayed with a sound. Touch or push the switch of the steering wheel to talk on the phone. To hang up the phone: or push the switch of Touch the steering wheel again. To refuse to - 2009 Toyota Sienna | Navigation Manual - Page 144
finished and normal tone screen appears. To hang up the phone: Touch or push the switch of the steering wheel. The continuous tone signal is the marked sign (p or w) want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number - 2009 Toyota Sienna | Navigation Manual - Page 145
tone. (For registering the speed tone, see "Registering the speed tone" on page 148.) (e) Change the settings of the Bluetoothr phone Touch "Settings" to display "Settings" screen. 1. Touch "Speed Tone". 2. Touch the desired switch to send a tone. You can change the settings of the phone. 145 - 2009 Toyota Sienna | Navigation Manual - Page 146
OTHER FUNCTIONS (i) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. 4. Touch the desired telephone number. 1. Touch "Speed - 2009 Toyota Sienna | Navigation Manual - Page 147
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. D Deleting all of the speed dial 1. Touch "Delete All" of "Speed Dial". 1. Touch "Delete" of "Speed Dial". 2. Touch " - 2009 Toyota Sienna | Navigation Manual - Page 148
OTHER FUNCTIONS (ii) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 4. Touch the desired touch screen button you want to register in. 1. Touch "Register" of "Speed Tone". 2. Use the software keyboard to input the name. 5. If - 2009 Toyota Sienna | Navigation Manual - Page 149
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 4. Input the number and touch "OK". 1. Touch "Edit" of "Speed Tone". 2. Touch the touch screen button you want to edit. 3. Use the software keyboard to input the name. 149 - 2009 Toyota Sienna | Navigation Manual - Page 150
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. D Deleting all the speed tone 1. Touch "Delete All" of "Speed Tone". 1. Touch "Delete" of "Speed Tone". 2. Touch "Yes". 2. Touch the - 2009 Toyota Sienna | Navigation Manual - Page 151
50 mph (80 km/h). (When it is under 43 mph (70 km/h), previous volume is back.) Each time you touch "Adaptive Volume Control", you can switch on or off. 1. Touch "Volume" to display the "Volume Settings" screen. 2. Touch "−" or "+" to adjust the "Voice Volume" or "Ring Volume". "Voice Volume - 2009 Toyota Sienna | Navigation Manual - Page 152
OTHER FUNCTIONS D Initializing the settings You can initialize the settings. (iv) Setting the screen Touch "Default". 1. Touch "Screen" to display the "Screen Settings" screen. Touch "Yes". 2. Do the detail settings of the screen and touch "OK". 152 - 2009 Toyota Sienna | Navigation Manual - Page 153
the method of the receiving call display. D Auto answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) after the preset time. Touch "Full" or "Icon". "Full mode" ...When a call is received, the - 2009 Toyota Sienna | Navigation Manual - Page 154
the settings. When the engine switch is in the "ACC" or "ON" position and the Bluetoothr is automatically connected, the connection check is displayed. Touch "Default". Touch "Yes". Touch "ON" or "OFF" of "Show Bluetooth∗ connection status at start up". ∗: Bluetooth is a registered trademark of - 2009 Toyota Sienna | Navigation Manual - Page 155
You can transfer the telephone numbers in your Bluetoothr phone to the system. Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. Touch "Phone Book" to display the "Phone Book Management" screen. 1. Touch "Transfer - 2009 Toyota Sienna | Navigation Manual - Page 156
cancel it, touch "Cancel". If the transferring is interrupted on the way, the phone book data transferred until then can be memorized in the system. 1. Touch "Register" of "Phone Book". 2. Touch the desired touch screen button to edit the phone book. 5. When this screen is displayed, the transfer - 2009 Toyota Sienna | Navigation Manual - Page 157
OTHER FUNCTIONS D Editing the name When you don't input the name, the number is displayed. D Editing the phone number You can register the phone number in "TEL1" and "TEL2" separately. Up to 2 numbers a person can be registered. 1. Touch "Name". 1. Touch "TEL1" or "TEL2". 2. Use the software - 2009 Toyota Sienna | Navigation Manual - Page 158
OTHER FUNCTIONS D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find this contact when needed, by using the group display. You can select "No group" or "Group 01" to "Group 19". "No group" is displayed if you - 2009 Toyota Sienna | Navigation Manual - Page 159
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. D Editing the data You can edit the registered data. 1. Touch "Add to". 1. Touch "Edit". 2. Select the data you want to add log data to. 2. Select the data you want to edit. 3. Confirm the added data on - 2009 Toyota Sienna | Navigation Manual - Page 160
OTHER FUNCTIONS D Deleting the data You can delete the data. When you release your car, delete all your data on the system. When you also touch "Edit" on this screen, you can edit it. 1. Touch "Delete" of "Phone Book". 2. Touch the desired touch screen button. 3. Touch "Yes". 160 - 2009 Toyota Sienna | Navigation Manual - Page 161
OTHER FUNCTIONS You can also delete it in the following way. D Deleting all the phone data 1. Touch "Delete All" of "Phone Book". 1. Touch "Phone Book". 2. Select the desired data. 2. Select the deleting method. "Group Data" ...Deleting all the phone data in group. "All Contact Data" ... - 2009 Toyota Sienna | Navigation Manual - Page 162
OTHER FUNCTIONS 3. When you select "Group Data", the "Select Group" screen is displayed. You can also delete it in the following way. 4. Select the desired group. 1. Touch "Phone Book". 5. Touch "Yes". 2. Touch "Delete All". 3. Touch "Yes". 162 - 2009 Toyota Sienna | Navigation Manual - Page 163
FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" is registered by default. You can change "Group 01" − "Group 19" into desired names. D Selecting a group icon 1. Touch "Icon". 1. Touch "Register" of "Group Name". 2. Select the desired icon - 2009 Toyota Sienna | Navigation Manual - Page 164
OTHER FUNCTIONS D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting. (excluding "No Group") 1. Touch "Name". 1. Touch "Delete" of "Group Name". 2. Use the software - 2009 Toyota Sienna | Navigation Manual - Page 165
group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. (a) Individually 1. Touch Name". "Delete All" of "Group 1. Touch "Delete" on the "Log Data" screen. 2. Touch "Yes". 2. Touch "Yes". 165 - 2009 Toyota Sienna | Navigation Manual - Page 166
from using some functions of the Hands−free system. It is useful when you leave your car with the hotel or you don't want others to see the data you registered. When you set or unlock the security, you have to input the security code. Be sure to change - 2009 Toyota Sienna | Navigation Manual - Page 167
. When you change the security code, don't forget the code. The dealers cannot unlock the security when you forget it. If you forget the security code, initialize your personal data. When you initialize it, not only the phonebook data but also the memory points in the navigation system, etc. will - 2009 Toyota Sienna | Navigation Manual - Page 168
When you set the phone book lock, you can have the following functions locked. D Display of the phone book screen and screen, deleting dialed numbers and received numbers. D Display of phone information screen. D Changing the security code. When you set this function, the speed dial screen is not - 2009 Toyota Sienna | Navigation Manual - Page 169
OTHER FUNCTIONS D Initializing the security code You can initialize the settings. (f) Set a Bluetoothr phone D Selecting a Bluetoothr phone In case you register more than one Bluetoothr phone, you need to choose a favorite one. 1. Touch "Default". 1. Touch "Settings" to display "Settings" screen - 2009 Toyota Sienna | Navigation Manual - Page 170
Bluetoothr phone is trying to connect, this screen is displayed. Touch "Yes" or "No". Although you can register up to 6 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 3. Touch "OK". When the result message is displayed, you can use the Bluetoothr phone. 170 - 2009 Toyota Sienna | Navigation Manual - Page 171
...The name of Bluetoothr phone which is displayed on the screen. You can change it into a desired name. "Bluetooth∗ Device Address" ...The address peculiar to the system. You cannot change it. 2. Touch "Change". 3. When you complete the setting, 1. Select the desired phone and touch "Information - 2009 Toyota Sienna | Navigation Manual - Page 172
it. "Passkey" ...The password when you register your cellular phone in the system. You can change it into the figure of 4−8 digits. "Bluetooth∗ Device Address" ...The address peculiar to the system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or - 2009 Toyota Sienna | Navigation Manual - Page 173
Use the software keyboard to input the Device Name. You can input up to 20 characters. 2. Touch "Change" of "Device Name" or "Passkey". ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 4. Input a Passkey with 4 − 8 digits. When you touch A, the inputted number is deleted. 5. When you - 2009 Toyota Sienna | Navigation Manual - Page 174
settings You can initialize the settings. D Deleting a Bluetoothr phone 1. Touch "Default". 1. Touch "Delete" of "Bluetooth∗ Telephone". 2. Touch "Yes". 2. Select the telephone you want to delete and touch "OK". 3. Touch "Yes". ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 174 - 2009 Toyota Sienna | Navigation Manual - Page 175
you delete is correct or not. The speech command system enables you to operate the navigation system and audio/video system by giving a command. 1. Select the telephone you want to display the information about. 1. Push the talk switch. A beep sounds and on screen message is displayed with - 2009 Toyota Sienna | Navigation Manual - Page 176
. If you want to check the command list, touch "Help" to display the help screen. (See "Help screen" on page 178.) When you touch "Cancel", the previous screen returns. If the navigation system does not respond or the confirmation screen does not disappear, please push the talk switch and try again - 2009 Toyota Sienna | Navigation Manual - Page 177
destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add" or "Replace" is displayed on message. (Displayed message and the switches on the screen depend on the situation.) Touch or say "Cancel", and the system will be canceled. Touch or - 2009 Toyota Sienna | Navigation Manual - Page 178
as wind noise, etc. 1. Touch the "Command List" tab on the upper side of the screen and the touch screen buttons on the right side of the screen to select the desired category. 2. You can scroll through the list of the command list by touching Touch "OK" after you check it. or . This system has - 2009 Toyota Sienna | Navigation Manual - Page 179
off, and change the screen to either day or night mode. D Contrast and brightness adjustment The brightness and contrast of the screen can be adjusted depending on the brightness of your surroundings. You can also turn the display off. 1. Touch the "Operating Guide" tab on the upper side of the - 2009 Toyota Sienna | Navigation Manual - Page 180
and tone adjustment (with rear seat entertainment system) The color and tone of the screen can be adjusted while a DVD video or video CD is being played. 1. Push the "DISPLAY" button. 2. Touch the desired button to adjust contrast and brightness. "Contrast" "+": Strengthens the contrast of - 2009 Toyota Sienna | Navigation Manual - Page 181
the day mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting - 2009 Toyota Sienna | Navigation Manual - Page 182
FUNCTIONS (a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select a color of touch screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns - 2009 Toyota Sienna | Navigation Manual - Page 183
rear seat entertainment system, the rear seat entertainment system can be locked to prevent rear passengers from operating the entertainment system. Select "ON system. (d) Delete personal data The following personal data can be deleted or returned to their default settings: D Maintenance conditions - 2009 Toyota Sienna | Navigation Manual - Page 184
OTHER FUNCTIONS Beep setting You can turn the beep sound off. 1. Touch "Delete personal data". The "Delete personal data" screen appears. 1. Push the "INFO" button. 2. Touch "Delete". The "Confirmation to delete all personal data" screen appears. 2. Touch "Beep Off". "Beep Off" is highlighted. - 2009 Toyota Sienna | Navigation Manual - Page 185
language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The - 2009 Toyota Sienna | Navigation Manual - Page 186
OTHER FUNCTIONS 186 - 2009 Toyota Sienna | Navigation Manual - Page 187
SECTION AUDIO/VIDEO SYSTEM Audio/video system 6 189 189 195 206 218 242 D Quick reference ...188 D Using your audio/video system ...Some basics ...Radio operation ...CD changer operation ...DVD player operation ...D Audio/video remote controls ... D Audio/video system operating hints ...243 - 2009 Toyota Sienna | Navigation Manual - Page 188
AUDIO/VIDEO SYSTEM Quick reference 1 2 3 4 5 Function menu display screen To control the radio, CD changer or DVD player, touch the the audio control screen. For details, see page 190. "SEEK/TRACK" button Push either side of this button to seek up or down for a station, or to access a desired - 2009 Toyota Sienna | Navigation Manual - Page 189
/video system. Some information may not pertain to your system. Your audio/video system works when the engine switch is in the "ACC" or "ON" position. NOTICE To prevent the battery from being discharged, do not leave the audio/video system on longer than necessary when the engine is not running - 2009 Toyota Sienna | Navigation Manual - Page 190
SYSTEM (a) Turning the system on and off CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes 7.9 in. (20 cm) between the antenna and the body of any person at all time . Therefore, never try to disassemble the player or alter any of its parts since you - 2009 Toyota Sienna | Navigation Manual - Page 191
immediately. Push these buttons if you want to switch from one mode to another. If the disc is not set, the CD changer or DVD player does not turn on. You can turn off the CD changer by ejecting all the discs. If the audio/video system was previously off, then the entire audio - 2009 Toyota Sienna | Navigation Manual - Page 192
DVD player operation are displayed on the function touch screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted. INFORMATION D If the system stereo recording or broadcast, changing the right/left balance - 2009 Toyota Sienna | Navigation Manual - Page 193
"OK". The surround function will turn on. Automatic sound levelizer (ASL): When the audio sound becomes difficult to be heard due to road noise, wind noise or other noises while driving, the system adjusts to the optimum volume according to the noise level. Select "ON" of "ASL" and touch "OK". 193 - 2009 Toyota Sienna | Navigation Manual - Page 194
AUDIO/VIDEO SYSTEM (e) Selecting screen size (with rear seat entertainment system) The video screen can be changed from normal mode to wide mode. 1. Push the "AUDIO" button. (f) Your CD changer When you insert a disc, touch "LOAD" and gently push the disc in with the label side up. This CD changer - 2009 Toyota Sienna | Navigation Manual - Page 195
(g) Your DVD player (with rear seat entertainment system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button. (h) AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX - 2009 Toyota Sienna | Navigation Manual - Page 196
automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from - 2009 Toyota Sienna | Navigation Manual - Page 197
Seek tuning: Push the "SEEK/TRACK" button on either side. The radio will begin seeking up or down for a button again. (d) Radio Data System Your audio/video system is equipped with Radio Data Systems (RDS). RDS mode provides you are available for the use only on FM stations which broadcast - 2009 Toyota Sienna | Navigation Manual - Page 198
SYSTEM "TYPE A "" If the system receives no RDS stations, "NO PTY" appears on the display. Each time you touch "TYPE A" or "TYPE "", the program type changes Blues) D RELIGION D ALARM (Emergency message) "TYPE SEEK" When a program is set, "TYPE SEEK" appears. Touch the switch and the system starts - 2009 Toyota Sienna | Navigation Manual - Page 199
"MSG" (MESSAGE) If the system receives a radio text from an RDS station, "MSG" appears on the display. Touch "MSG", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "MSG OFF", the display returns. (e) Traffic announcement - 2009 Toyota Sienna | Navigation Manual - Page 200
.com or call 1−800−967−2346. Canada- Visit on the web at www.xmradio.ca or call 1−877−438−9677. The XMr Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XMr Satellite Radio - 2009 Toyota Sienna | Navigation Manual - Page 201
AUDIO/VIDEO SYSTEM D Listening to satellite radio D Channel category Touch either "TYPEA" or "TYPE"" to go to the next or previous category. Push the "AM·SAT" button to - 2009 Toyota Sienna | Navigation Manual - Page 202
AUDIO/VIDEO SYSTEM D Presetting a channel 1. Tune in the desired channel. D Selecting a channel Tune appears on the touch screen button. Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled - 2009 Toyota Sienna | Navigation Manual - Page 203
AUDIO/VIDEO SYSTEM D Displaying the title and name To scan the currently selected channel category: Touch "TYPE SCAN" or push the "SCAN" button briefly. "SCAN" appears on the - 2009 Toyota Sienna | Navigation Manual - Page 204
available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or ANTENNA UPDATING NO SIGNAL LOADING OFF AIR Contact the XMr Listener 1−877−438−9677 (Canada - 2009 Toyota Sienna | Navigation Manual - Page 205
. - Consult the dealer or an experienced radio/TV technician for help. Information to user Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk - 2009 Toyota Sienna | Navigation Manual - Page 206
AUDIO/VIDEO SYSTEM - CD changer operation (a) Inserting discs The engine switch must be in the "ACC" or "ON" Touch "LOAD". The display opens. 3. The amber indicators at either side of the slot start blinking. When the indicators change to green, insert only one disc. After the disc is loaded, the - 2009 Toyota Sienna | Navigation Manual - Page 207
Under extremely cold conditions, the display may react slowly or operation sound may become louder. 2. Touch the disc number to be ejected. The display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected, the amber indicators change to green. A disc - 2009 Toyota Sienna | Navigation Manual - Page 208
disc trays. Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC·AUX" button again to switch to the CD changer. If the rear seat entertainment system is on, pushing the "DISC·AUX" button switches the sound of the front audio/video system and that of the rear seat - 2009 Toyota Sienna | Navigation Manual - Page 209
AUDIO/VIDEO SYSTEM (d) Selecting a desired disc Touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. (e) Playing an audio disc Push the "AUDIO" button to display this screen. 209 - 2009 Toyota Sienna | Navigation Manual - Page 210
list is displayed, the top page is displayed. Vehicles with rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the "SEEK/TRACK" button. Fast forward: Push " " side of the "SEEK/TRACK" button and hold it to fast forward the - 2009 Toyota Sienna | Navigation Manual - Page 211
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED TRACK OR DISC Searching for a desired track - Touch "SCAN" on the screen or push the "SCAN" button briefly while the disc is - 2009 Toyota Sienna | Navigation Manual - Page 212
briefly while the disc is playing. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel a second while the disc is playing. "D·RAND" appears on the screen. The system selects a track on all the audio discs in the changer in random order. - 2009 Toyota Sienna | Navigation Manual - Page 213
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER "FOLDERY": Touch this touch screen button to go to the next folder. "FOLDERB": Touch this touch screen button to go to the previous folder. "FOLDER LIST": The desired folder can be selected in a list. This function is available only when the vehicle is - 2009 Toyota Sienna | Navigation Manual - Page 214
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. 214 - 2009 Toyota Sienna | Navigation Manual - Page 215
AUDIO/VIDEO SYSTEM Touch the desired file number. The changer will start playing the The folder list is displayed. "DETAIL": Details of the file currently playing is displayed. This function is available only when the vehicle is not moving. SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen or - 2009 Toyota Sienna | Navigation Manual - Page 216
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED FOLDER Touch "SCAN" on the screen or push the "SCAN" button for longer than a second while the disc is playing. "FLD.SCAN" - 2009 Toyota Sienna | Navigation Manual - Page 217
read or the system has trouble. Push the "DISC·AUX" button once again. If the changer does not operate, check that the disc surface is not soiled or damaged. If the disc is O.K., the temperature of the changer's internal mechanism may be raised because of high external temperature. Remove the disc - 2009 Toyota Sienna | Navigation Manual - Page 218
is loaded in the DVD player. A WMA disc cannot be played. Refer to "Rear seat entertainment system" for details. For appropriate discs for this player, see "Audio/video system operating hints" on page 243. (a) Inserting the disc Insert the disc into the slot with the label side up. An adapter must - 2009 Toyota Sienna | Navigation Manual - Page 219
AUDIO/VIDEO SYSTEM NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. (b) Ejecting a disc Push the button. 219 - 2009 Toyota Sienna | Navigation Manual - Page 220
AUDIO/VIDEO SYSTEM (c) Playing a disc Push the "DISC·AUX" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating an audio CD PLAYING AN AUDIO CD CD text only - The disc - 2009 Toyota Sienna | Navigation Manual - Page 221
either side of the "SEEK/TRACK" button and repeat it until the desired track number appears on the display. As you release the button, the player will start playing the selected track from the beginning. "TRACK LIST": The desired track can be selected from a list. This function is available only - 2009 Toyota Sienna | Navigation Manual - Page 222
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED TRACK Touch "SCAN" on the screen or push the "SCAN" button. "SCAN" will be highlighted on the screen. The player will play the next track for 10 seconds, then scan again. To select a track, touch "SCAN" on the screen or push the "SCAN" button a second - 2009 Toyota Sienna | Navigation Manual - Page 223
SYSTEM (e) Operating a MP3 DISC PLAYING A MP3 DISC Push the "AUDIO" button to display this screen. SELECTING A DESIRED FOLDER Touch the desired folder number. The player of the file currently playing is displayed. This function is available only when the vehicle is not moving. "FOLDERY": Touch - 2009 Toyota Sienna | Navigation Manual - Page 224
AUDIO/VIDEO SYSTEM Touch the desired file number. The player will start playing the selected side of the "SEEK/ TRACK" button and hold it to reverse the disc. When you release the button, the player will resume playing. "FILE": The desired file can be selected in a list. This function is available - 2009 Toyota Sienna | Navigation Manual - Page 225
VIDEO SYSTEM SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen or push the "SCAN" button briefly. "SCAN" appears on the screen. The DVD player button until the beep sounds. "FLD.SCAN" appears on the screen. The DVD player will play the file at the beginning of each folder for 10 seconds, then - 2009 Toyota Sienna | Navigation Manual - Page 226
SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - Touch "RPT" briefly while the file is playing. "RPT" appears on the screen. When the file is finished, the player appears on the screen. The system selects a file in the - 2009 Toyota Sienna | Navigation Manual - Page 227
SYSTEM (f) Operating a DVD video disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD - 2009 Toyota Sienna | Navigation Manual - Page 228
AUDIO/VIDEO SYSTEM PLAYING A DVD DISC Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If you touch - 2009 Toyota Sienna | Navigation Manual - Page 229
AUDIO/VIDEO SYSTEM DESCRIPTION OF DVD CONTROLS D Top page of DVD video controls "Menu" and "Top Menu": If you touch any of the above controls, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control key - 2009 Toyota Sienna | Navigation Manual - Page 230
SYSTEM SELECTING A MENU ITEM Enter the menu item using Y, ", B and A and touch "Enter". The player starts playing video for that menu item. (For details, see the manual that comes with the DVD "Enter". The player starts playing video for that title number. When you push either side of the "SEEK - 2009 Toyota Sienna | Navigation Manual - Page 231
AUDIO/VIDEO SYSTEM CHANGING THE SUBTITLE LANGUAGE Each time you touch "Subtitle", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous CHANGING THE AUDIO LANGUAGE Each time you touch "AUDIO", the language is selected from the ones - 2009 Toyota Sienna | Navigation Manual - Page 232
AUDIO/VIDEO SYSTEM CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the angle mark appears on the screen. Each time you touch "Angle", the angle changes. When you touch screen returns. , and the previous SETUP MENU There are initial setting touch screen - 2009 Toyota Sienna | Navigation Manual - Page 233
SYSTEM D Subtitle language You can change D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter DVD language You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to read on the "DVD alternately. 233 - 2009 Toyota Sienna | Navigation Manual - Page 234
AUDIO/VIDEO SYSTEM ENTER AUDIO LANGUAGE CODE 0113 0118 0119 0125 0126 0201 0205 If you touch "Others" on the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the language you want to hear or read by entering a language code. 1. Enter the 4− - 2009 Toyota Sienna | Navigation Manual - Page 235
AUDIO/VIDEO SYSTEM 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 1121 1125 1201 1214 1215 1220 - 2009 Toyota Sienna | Navigation Manual - Page 236
to cancel the setup operation from the rear seat, touch "Play". The player will resume normal play. Under the same condition, the rear passenger can cancel the setup operation from the front seat. To lock the operation of the player from the rear seat, see "(c) Rear system lock" on page 183. 236 - 2009 Toyota Sienna | Navigation Manual - Page 237
AUDIO/VIDEO SYSTEM (g) Operating a video CD PLAYING A VIDEO CD Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING - 2009 Toyota Sienna | Navigation Manual - Page 238
AUDIO/VIDEO SYSTEM DESCRIPTION OF VIDEO CD CONTROLS D Controls on top page "Select Number": display. If you touch this while the player is playing video, the next track is searched and played. "Main/Sub": A multiplex transmission changing control. The mode changes from Main/Sub to Main, to Sub and - 2009 Toyota Sienna | Navigation Manual - Page 239
properly. If "DVD ERROR" appears on the display: It indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove the disc from the player and allow the player to cool down. If the malfunction is not rectified: Take your vehicle to your dealer. If an - 2009 Toyota Sienna | Navigation Manual - Page 240
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating a country where - 2009 Toyota Sienna | Navigation Manual - Page 241
. Viewer restrictions: This feature limits what can be viewed in conformity with a level of restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes. Level - 2009 Toyota Sienna | Navigation Manual - Page 242
you want to listen to. Vehicles with rear seat entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing the " " or " " switch. Some parts of the audio/video system can be adjusted with the switches on the steering wheel. Details of the specific - 2009 Toyota Sienna | Navigation Manual - Page 243
/VIDEO SYSTEM Audio/video system operating hints 3 "MODE" switch Each time you push the "MODE" switch, the system changes the audio mode. The DVD player will be selectable if a rear seat entertainment system is installed in your vehicle. To turn the audio/video system on, push the "MODE" switch. To - 2009 Toyota Sienna | Navigation Manual - Page 244
alternately air conditioning to cool the vehicle interior before you use the changer and player. D Bumpy roads or other vibrations may make your CD changer and DVD player skip. D If moisture gets into your CD changer and DVD player, you may not play even though they appear to be working. Remove - 2009 Toyota Sienna | Navigation Manual - Page 245
AUDIO/VIDEO SYSTEM Audio CDs Audio CDs CD changer D Use only discs marked as shown above. The following products may not be playable on your changer. Copy−protected CDs CD−Rs (CD−Recordable) CD−RWs (CD−Re−writable) CD−ROMs DVD video discs Video CDs DVD player D Use only discs marked as shown - 2009 Toyota Sienna | Navigation Manual - Page 246
quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to the - 2009 Toyota Sienna | Navigation Manual - Page 247
fingerprints on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store - 2009 Toyota Sienna | Navigation Manual - Page 248
system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. (The system can - 2009 Toyota Sienna | Navigation Manual - Page 249
VIDEO SYSTEM 001 "finalizing process" (a process that allows discs to be played on a conventional CD player) cannot be played. D It may not be possible to play CD− R/CD direct exposure to sunlight, high temperatures or other storage conditions. The unit may be unable to play some damaged discs. D - 2009 Toyota Sienna | Navigation Manual - Page 250
AUDIO/VIDEO SYSTEM TERMS Packet write- This is a general term that describes the process of (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio) is an audio compression format developed - 2009 Toyota Sienna | Navigation Manual - Page 251
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system 7 D Rear view monitor system ...252 251 - 2009 Toyota Sienna | Navigation Manual - Page 252
with mirrors before proceeding. Do not use the system when the back door is not completely closed. If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and mounting angle checked at your Toyota dealer. As the camera has - 2009 Toyota Sienna | Navigation Manual - Page 253
mirror before proceeding. When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. D Area displayed on screen Image is displayed approximately level on screen. " Corners of bumper The area detected by the camera is limited - 2009 Toyota Sienna | Navigation Manual - Page 254
or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera uses a special the camera, or when humidity is high (for example, when it rains) D When foreign matter (for example, snow or mud) is adhering to the camera D When the camera - 2009 Toyota Sienna | Navigation Manual - Page 255
REAR VIEW MONITOR SYSTEM If a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera, the smear effect∗ peculiar to the camera may occur. ∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is - 2009 Toyota Sienna | Navigation Manual - Page 256
REAR VIEW MONITOR SYSTEM 256 - 2009 Toyota Sienna | Navigation Manual - Page 257
APPENDIX SECTION APPENDIX Appendix 8 D Limitations of the navigation system ...258 D Map database information and updates ...260 257 - 2009 Toyota Sienna | Navigation Manual - Page 258
cases. NOTICE The installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation - 2009 Toyota Sienna | Navigation Manual - Page 259
road such as in sand, gravel, snow, etc. D When driving on a long straight road. D When freeway and surface streets run in parallel. D After moving by ferry current position manually. For information on setting the current position calibration, see "D Current position/tire change calibration" - 2009 Toyota Sienna | Navigation Manual - Page 260
replacing the tire, implement the operation described in the "D Current position/tire change calibration". (See page 117.) This navigation system uses tire turning data and is designed sure the tire pressure of all four tires is correct. This system uses the maps of DENSO. © 2007 DENSO CORPORATION © - 2009 Toyota Sienna | Navigation Manual - Page 261
The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. TERMS AND CONDITIONS Personal Use Only. You agree to use this Data together with the navigation system for the solely personal, non− commercial purposes for which you were licensed, and - 2009 Toyota Sienna | Navigation Manual - Page 262
, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR ITS LICENSORS HAVE - 2009 Toyota Sienna | Navigation Manual - Page 263
previously existing between us with respect to such subject matter. Governing Law. The above terms and conditions shall be governed by the laws of the State of Illinois, without giving effect to (i) its official must notify NAVTEQ prior to seeking additional or alternative rights in the Data. 263 - 2009 Toyota Sienna | Navigation Manual - Page 264
and subject to the terms and conditions of this Agreement. You shall not alter, obscure or remove any copyright notices, trademark notices or written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system for which it was created. Except to - 2009 Toyota Sienna | Navigation Manual - Page 265
system for which it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. DISCLAIMER OF WARRANTY WARRANTIES IS AN ESSENTIAL CONDITION OF THIS AGREEMENT. LIMITATION LIMITATION, LOST PROFITS OR COSTS - 2009 Toyota Sienna | Navigation Manual - Page 266
1995) (DOD technical data − commercial items clause); FAR 52.227−14 Alternates I, II, and III (JUN 1987) (civilian agency technical data and listed herein and this Agreement, the construction that provides greater limitations on the Government's rights shall control. Contractor/manufacturer is - 2009 Toyota Sienna | Navigation Manual - Page 267
, non−commercial purposes, and not for service bureau, time−sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble or reverse engineer any portion of this information, and may - 2009 Toyota Sienna | Navigation Manual - Page 268
OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS HAVE resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney's fees, arising out of - 2009 Toyota Sienna | Navigation Manual - Page 269
- Changing the map DVD−ROM There are two types of areas available for route guidance. In one type of area, primarily around metropolitan centers, detailed route guidance is available for the entire area. In the other type of area, all roads are displayed on the map but route guidance is limited. The - 2009 Toyota Sienna | Navigation Manual - Page 270
map database is normally updated once a year. Contact your dealer for information about the availability and pricing of an update. D To confirm the is moving. It could damage your navigation system. 2. Touch "Map DVD". INFORMATION Under extremely cold conditions, the display may react slowly or - 2009 Toyota Sienna | Navigation Manual - Page 271
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection - 2009 Toyota Sienna | Navigation Manual - Page 272
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the - 2009 Toyota Sienna | Navigation Manual - Page 273
become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when - 2009 Toyota Sienna | Navigation Manual - Page 274
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2009 Toyota Sienna | Navigation Manual - Page 275
Quick guide - - Overview buttons and guidance screen 0U5116X No. 1 2 3 4 Name North−up or heading−up symbol Scale indicator "INFO" button Zoom out touch screen button "Mark" "Route" Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2009 Toyota Sienna | Navigation Manual - Page 276
" screen. Touch this touch screen button to change the screen mode. Push this button to display System) Speech command system indicator Whenever your vehicle is receiving signals from the GPS, this mark is displayed. This indicator is shown by pushing the talk switch. The speech command system - 2009 Toyota Sienna | Navigation Manual - Page 277
- Registering home 1 Push "MENU" button. 1U5067X 2 Touch "My Places". 0U5002F 3 Touch "Register" of the home. 0U5003F 4 There are 12 different methods to search your home. 0U5004F See "Destination search" on page 43. 7 - 2009 Toyota Sienna | Navigation Manual - Page 278
5 Touch "Enter". The "Memory Point" screen is displayed. 0U5005F 6 Touch "OK". 0U5006F Registration of home is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) 8 - 2009 Toyota Sienna | Navigation Manual - Page 279
- Registering preset memory points (Quick access) 1 Push "MENU" button. 1U5067X 2 Touch "My Places". 0U5007F 3 Touch "Register" of the memory points. 0U5008F 4 There are 13 different methods to search preset memory points. 0U5009F See "Destination search" on page 43. 9 - 2009 Toyota Sienna | Navigation Manual - Page 280
"Quick Access". 0U5011F 7 Touch one of preset buttons 1 to 5. 0U5012F 8 Touch "OK". 0U5013F Registration of preset memory points is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) The registered points can be used - 2009 Toyota Sienna | Navigation Manual - Page 281
13 different methods to search destinations. 0U5014F See "Destination search" on page 43. 3 Touch "Enter". The navigation system performs a search for the route. 0U5015F 4 Touch "Guide", and start driving. 0U5016F Routes other than the one recommended can also be selected. (See "Starting - 2009 Toyota Sienna | Navigation Manual - Page 282
home has been registered. (To register "Home", see " - Registering home" on page 102.) 3 Touch "Enter". 0U5018F The navigation system performs a search for the route. 4 Touch "Guide", and start driving. 0U5019F Routes other than the one recommended can also be selected. (See "Starting route