2010 Toyota Corolla Warranty, Maitenance, Services Guide - Page 56

Explanation of Maintenance Items Engine Valve Clearance Inspect for tappet noise and engine vibration and adjust if necessary. A qualified technician should perform this operation. Spark Plugs Replace at specified intervals. Install new plugs of the same type as originally equipped. A qualified technician should perform this operation. Exhaust Pipes and Mountings Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary. Steering Gear Box Inspect for signs of leakage. If you discover any leakage, have it repaired immediately by a qualified technician. Steering Linkage and Boots With the vehicle stopped, check for excessive freeplay in the steering wheel. Inspect the linkage for bending and damage and the dust boots for deterioration, cracks and damage. Replace any damaged parts. A qualified technician should perform these operations. Fuel Lines and Connections, Fuel Tank Band and Fuel Tank Vapor Vent System Hoses Visually inspect for corrosion, damage, cracks, and loose or leaking connections. Tighten connections or replace parts as necessary. Tire Rotation Tires should be rotated according to the instructions in the Owner's Manual. When rotating tires, check for damage and uneven wear. Replace if necessary. Fuel Tank Cap Gasket Visually inspect for cracks, deterioration and damage and replace if necessary. MAINTENANCE Nuts and Bolts on Chassis and Body Re-tighten the seat-mounting bolts and front/rear suspension member retaining bolts to specified torque. Radiator and Condenser Inspect for debris, corrosion and signs of damage. Have any problem repaired immediately by a qualified technician. 54 Maintenance Log