2010 Toyota Matrix Navigation Manual
2010 Toyota Matrix Manual
2010 Toyota Matrix manual content summary:
- 2010 Toyota Matrix | Navigation Manual - Page 1
CUSTOMER EXPERIENCE CENTER 1-800-331-4331 MATRIX 2 0 1 0 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 1/09 08-TCS-02929 00505-NAV10-MAT - 2010 Toyota Matrix | Navigation Manual - Page 2
6 7 7 8 10 10 10 10 10 11 11 11 11 11 12 12 13 LIMITATIONS OF THIS QUICK REFERENCE GUIDE This Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner - 2010 Toyota Matrix | Navigation Manual - Page 3
M DISC• DISC C•A A AUX AUX TOYOTA TOY YO YO OTA OT A INFO INF IN FO £ NORTH-UP OR COMPASS MODE Icon Touch to change the map display between North-up or Head screen. Change the angle of the screen for best viewing. AUDIO Button Set the radio station presets, adjust the balance and tone controls. - 2010 Toyota Matrix | Navigation Manual - Page 4
button followed by and move to step 3. To change Region, touch and move to step 2. step 2 Select the desired Region and . touch step 3 Input the house number and touch . step 4 and input the Touch to see street name. Touch all of the available options. Quick Tip - Enter the street name - 2010 Toyota Matrix | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Use or to scroll up or down. Touch the desired city. Select the desired street. step 8 Select the desired Route Preference by touching . step 9 Select the desired Route Preference(s) for the trip. When the yellow bar appears, the route has been selected. - 2010 Toyota Matrix | Navigation Manual - Page 6
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY NAME step 1 Press the DEST panel button followed by . step 2 Touch . step 3 Input the POI name and touch . step 4 or to scroll up Use or down. Touch the desired destination Quick Tip - If the POI isn't listed in the - 2010 Toyota Matrix | Navigation Manual - Page 7
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by . step 2 Touch . step 3 Touch . step 4 Touch the desired category icon. step 5 Touch the desired sub-category and then icon followed by touch . step 6 Use or - 2010 Toyota Matrix | Navigation Manual - Page 8
by not necessary to dial "1." Quick Tip - Personal telephone numbers cannot be used for Destination input unless previously added in the Address Book. step 3 Select the business or registered address from the screen. step 4 See page 10 to select the desired Route Preference. Touch . step - 2010 Toyota Matrix | Navigation Manual - Page 9
, use a point close to your home instead of your actual home address. step 5 and input the Touch street name. Touch to see all of the available options. step 6 Use or to scroll up or down. Touch the desired street and go to step 9. If the street you are looking for is - 2010 Toyota Matrix | Navigation Manual - Page 10
the city name or select from a previously registered city. If the city is not available try the next largest city in the vicinity. step 8 Touch the desired city. . step 10 Touch at the top left of the screen to change the home icon. step 11 Touch the desired icon for your home. step 12 Touch - 2010 Toyota Matrix | Navigation Manual - Page 11
ADDITIONAL NAVIGATION FEATURES SEARCH AREA Prior to inputting the desired address select the most direct route based upon driven mileage. The system does not account for traffic signals or traffic flow. Single Map * Arrow * Freeway Information * Intersection Guidance * Selections available when in - 2010 Toyota Matrix | Navigation Manual - Page 12
. Once the screen transition is switched off, the audio or climate control screen (if equipped) will remain without reverting to the map display of points of interest such as Gas Stations, Restaurants or Hotels can be viewed during your trip. To access this feature, select Freeway Exit Info Mode from - 2010 Toyota Matrix | Navigation Manual - Page 13
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME - 2010 Toyota Matrix | Navigation Manual - Page 14
data are updated 12 times each hour from a variety of sources. XM NavTraffic® service is available in 80 major metropolitan areas across the continental US with more to come. New Corolla Matrix owners with factory-installed navigation receive a 90-day complimentary trial subscription from XM.* Traf - 2010 Toyota Matrix | Navigation Manual - Page 15
the system automatically select another route when moderate or heavy traffic is detected during route guidance. Touch to receive voice notification of traffic events within 20 miles of the suggested route. Touch to show traffic flow information. Traffic flow is displayed with color lines alongside freeways - 2010 Toyota Matrix | Navigation Manual - Page 16
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation D Display operation D Initial screen D Touch screen operation D Inputting letters and numbers/List screen operation D Function help D Map screen operation Current position display ...Screen - 2010 Toyota Matrix | Navigation Manual - Page 17
0 in the reverse order. If the engine switch is set at OFF, the display will automatically move back to position 0 . The display will automatically resume the previous position when the engine switch is in "ACC" or "ON" position. 2. Touch "TILT". INFORMATION To adjust the screen settings such as - 2010 Toyota Matrix | Navigation Manual - Page 18
displayed and the system will begin operating. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION - 2010 Toyota Matrix | Navigation Manual - Page 19
dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information on the "Information" screen are touched, the screen will change back to "CAUTION" screen and then change to the map - 2010 Toyota Matrix | Navigation Manual - Page 20
lightly touch buttons on the screen with the finger. When a button on the screen is touched, a beep sounds. Do not use objects other than the finger to touch the screen. INFORMATION the screen may be dark and hard to see. If so, change the angle of the screen, look at the screen from different - 2010 Toyota Matrix | Navigation Manual - Page 21
, letters and numbers can be input via the touch screen. D To input letters To display the alphabet keys, touch "A−Z" or " ". INFORMATION Keyboard layout can be changed. (See page 112.) Enter letters by touching the alphabet keys directly. Touching this button erases one letter. By holding this - 2010 Toyota Matrix | Navigation Manual - Page 22
even if the entered address or name is incomplete. If the number of matches is four or less, the list is displayed without touching "List". INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9999, the - 2010 Toyota Matrix | Navigation Manual - Page 23
on the screen can be rearranged. TYPE A To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen position. 1. Touch "Sort by". If appears to the right of the item name, the complete name is too long for the display. Touch - 2010 Toyota Matrix | Navigation Manual - Page 24
BASIC FUNCTIONS Function help TYPE B Explanations for the functions of the "Destination", "Setup", "Menu" and "XM NavTraffic" screens can be viewed. "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is - 2010 Toyota Matrix | Navigation Manual - Page 25
it is automatically corrected after the vehicle receives signals from the GPS. Use the scroll feature to move the desired point to the center of the . D To correct the current position manually, see page 118. INFORMATION When the one−touch scroll feature is used, the current vehicle position - 2010 Toyota Matrix | Navigation Manual - Page 26
. D To register the cursor position as a memory point Memory point registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) If there is - 2010 Toyota Matrix | Navigation Manual - Page 27
To change the icon or name, etc., see " - Editing memory points" on page 98. Up to 106 memory points can be registered. If there is an attempt to register more than 106, a message appears for confirmation. D To see information about the icon where the cursor is set To display information about - 2010 Toyota Matrix | Navigation Manual - Page 28
When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. Touch "Info.". Touch "Info.". Information such as the name, address, and phone number are displayed. If "Enter " is touched, the position of the cursor is set as a destination. If there - 2010 Toyota Matrix | Navigation Manual - Page 29
of the screen. Any one of the screen configurations can be selected . 1. Touch this button to display the following screen. Touch "Info.". Information such as the name, address, and phone number are displayed. To delete a destination, touch "Delete". 2. To select the desired screen configuration - 2010 Toyota Matrix | Navigation Manual - Page 30
page 36.) : To display the turn list screen. (See page 72.) : To display the arrow screen. (See page 72.) : To display the freeway information screen. (See page 70.) : To display the intersection guidance screen or the guidance screen on the freeway. (See page 71.) D Screen configurations SINGLE - 2010 Toyota Matrix | Navigation Manual - Page 31
in the direction of the destination. When driving refer to the longitude and latitude coordinates, and the compass, to make sure that your vehicle is headed in the direction of the destination. INFORMATION This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the - 2010 Toyota Matrix | Navigation Manual - Page 32
area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street is displayed by . D It is not possible to perform scrolling on the foot print map (one− touch scroll) while driving. INFORMATION When the map scale - 2010 Toyota Matrix | Navigation Manual - Page 33
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 1. Touch "Info." while the foot print map is displayed. If the map is displayed by a split screen, the map will change into a single map display. - 2010 Toyota Matrix | Navigation Manual - Page 34
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. Touch or . " North−up screen " Heading−up - 2010 Toyota Matrix | Navigation Manual - Page 35
BASIC FUNCTIONS 40 - 2010 Toyota Matrix | Navigation Manual - Page 36
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search D Quick reference ("Destination" screen) D Destination search Selecting the region to search ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI*" ... - 2010 Toyota Matrix | Navigation Manual - Page 37
"Memory points". (To register memory points, see " - Registering memory points" on page 97.) ...59 6 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...59 7 "Map" A destination can be selected simply by touching the - 2010 Toyota Matrix | Navigation Manual - Page 38
" To change the selected region to search, touch this button...44 13 Quick access touch screen buttons One of 5 preset memory points can be selected by touching the screen directly. If a quick access point has not been registered, a message will be displayed and will automatically switch to the - 2010 Toyota Matrix | Navigation Manual - Page 39
Address", "POI", "Freeway Ent./Exit" or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 regions. (For map database information and updates, see "Map database information and updates" on page 180.) 1. Touch the region to - 2010 Toyota Matrix | Navigation Manual - Page 40
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in - 2010 Toyota Matrix | Navigation Manual - Page 41
message will be displayed and will automatically switch to the setting screen. To INFORMATION Guidance starts from the current vehicle position to your home if "Enter" is touched even while driving. 2. Touch any of the quick access touch screen buttons on the "Destination" screen. The screen changes - 2010 Toyota Matrix | Navigation Manual - Page 42
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to input a destination by address. 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Inputting a house number and a street name 1. Touch numbers directly on the screen to input a house number. After - 2010 Toyota Matrix | Navigation Manual - Page 43
"Starting route guidance" on page 65.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, an address range on the screen can - 2010 Toyota Matrix | Navigation Manual - Page 44
by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 3. Touch the button of the desired city - 2010 Toyota Matrix | Navigation Manual - Page 45
1. Touch "Nearest 5 Cities". SELECTING FROM THE LAST 5 CITIES 2. Touch the button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 47.) Touch the - 2010 Toyota Matrix | Navigation Manual - Page 46
the name of the Point of Interest. 3. Touch the button for the desired method. 2. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) When inputting the name - 2010 Toyota Matrix | Navigation Manual - Page 47
on page 52 and "Selecting from the categories" on page 54.) Touch "City". INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, - 2010 Toyota Matrix | Navigation Manual - Page 48
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2. Input the city name. 2. Touch the button of the desired city name. 3. Touch the button of the desired city name from the displayed list. 53 - 2010 Toyota Matrix | Navigation Manual - Page 49
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES D Selecting from the categories Touch the button of the desired city name. If the navigation has never been used, no cities will be displayed on the screen. Touch "Category". If the desired POI category is on the screen, touch the name to - 2010 Toyota Matrix | Navigation Manual - Page 50
to display the names of POIs located within approximately 20 miles (32 km) from the selected search point. 3. Touch the button of the desired city center name. When an arrow facing the desired point is touched, the map scrolls in that direction. Releasing the finger from the arrow will stop the - 2010 Toyota Matrix | Navigation Manual - Page 51
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". When an arrow facing the desired point is - 2010 Toyota Matrix | Navigation Manual - Page 52
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2010 Toyota Matrix | Navigation Manual - Page 53
be displayed. By touching the button of the desired item, the screen changes and displays the map location of the selected destination and the route button, the list of the items searched along the route is displayed. INFORMATION D If there is no match for the telephone number inputted, a list - 2010 Toyota Matrix | Navigation Manual - Page 54
Push the "DEST" button. 2. Touch "Emergency" on the "Destination" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers, hospitals, or fire stations are shown. The current position is shown with an - 2010 Toyota Matrix | Navigation Manual - Page 55
. 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route the point, touch "Yes". To cancel the deletion, touch "No". INFORMATION The list of previous destinations can also be deleted by touching "Delete Previous - 2010 Toyota Matrix | Navigation Manual - Page 56
located near the destination to be set. INFORMATION Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 4. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected - 2010 Toyota Matrix | Navigation Manual - Page 57
touch "Freeway Ent./Exit" on the second page of the "Destination" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2010 Toyota Matrix | Navigation Manual - Page 58
. 2. Touch "Coordinates" on the second page of the "Destination" screen. 5. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) "Input Name": An - 2010 Toyota Matrix | Navigation Manual - Page 59
is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. INFORMATION Set destinations can also be deleted by touching "Route". (See " - Deleting destinations" on page 77.) 3. Touch the destination for deletion. "Delete - 2010 Toyota Matrix | Navigation Manual - Page 60
phone number. Current position Destination point 3 Type of the route and the distance 4 Distance of the entire route 3. To start guidance, touch "Guide". "3 Routes": To select the desired route from three possible routes. (See page 67.) "Route": To change the route. (See pages 76 and 78.) 1 2 65 - 2010 Toyota Matrix | Navigation Manual - Page 61
Preference". CAUTION Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may provide wrong information. 2. Select the desired route preference by touching the button. When searching for a route, the - 2010 Toyota Matrix | Navigation Manual - Page 62
by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. 1. To select the desired route from three routes, touch "3 Routes". 2. Touch "Quick1 by a green line. "Info.": To display the following information about each of the 3 routes. 67 - 2010 Toyota Matrix | Navigation Manual - Page 63
DESTINATION SEARCH 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 68 - 2010 Toyota Matrix | Navigation Manual - Page 64
ROUTE GUIDANCE SECTION ROUTE GUIDANCE Route guidance D Route guidance screen D Typical voice guidance prompts D Distance and time to destination D Setting and deleting destination Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route Search condition ...Detour - 2010 Toyota Matrix | Navigation Manual - Page 65
During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the next junction and exit, or POIs in the - 2010 Toyota Matrix | Navigation Manual - Page 66
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2010 Toyota Matrix | Navigation Manual - Page 67
the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen. 1 1 2 3 4 Next street name or destination name - 2010 Toyota Matrix | Navigation Manual - Page 68
ahead." "The exit ahead." (Beep sound only) 2 1 2 "Proceed about 5 miles." "In a quarter of a mile, right turn." "Right turn." (Beep sound only) 3 4 5 3 4 INFORMATION On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on - 2010 Toyota Matrix | Navigation Manual - Page 69
destination. The route guidance is now finished." 1 "In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) 2 3 INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be - 2010 Toyota Matrix | Navigation Manual - Page 70
, the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the route is displayed. Travel time and arrival time is calculated based on the set vehicle speed information. (See page 111.) However, when the vehicle is not - 2010 Toyota Matrix | Navigation Manual - Page 71
Adding destinations and searching again for the routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. Touch "Add". 3. Input an additional destination in the same way as the - 2010 Toyota Matrix | Navigation Manual - Page 72
system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few seconds when the order is fixed. A set destination can be deleted. 1. Touch "Route". 2. Touch "Delete". When more than one destination - 2010 Toyota Matrix | Navigation Manual - Page 73
ROUTE GUIDANCE Setting route - - Search condition 4. To delete the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system - 2010 Toyota Matrix | Navigation Manual - Page 74
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 76 and 78.) 1. Touch "Route". 2. Touch "Detour". 79 - 2010 Toyota Matrix | Navigation Manual - Page 75
search for the route based on the traffic congestion information received from XMr guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the detour suggested by the system. INFORMATION - 2010 Toyota Matrix | Navigation Manual - Page 76
is set on the freeway, but the vehicle is driven parallel along the freeway.) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions that determine the route to the destination. 2. Touch "Start from Adjacent Road". When there is no adjacent road, this button will - 2010 Toyota Matrix | Navigation Manual - Page 77
ROUTE GUIDANCE Map view - - Display POI icons Points of Interest such as gas stations and restaurants can be displayed on the map screen. You can also set their page 83.) A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 114.) 82 - 2010 Toyota Matrix | Navigation Manual - Page 78
ROUTE GUIDANCE Touch "Other POIs" on the "Display POI icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols of those locations on the map screen. D To display the local POI list Points of Interest that are - 2010 Toyota Matrix | Navigation Manual - Page 79
to set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the . At this time, the distance from route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 76 and 78.) "Turn List - 2010 Toyota Matrix | Navigation Manual - Page 80
or . However, not all road touching names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting - 2010 Toyota Matrix | Navigation Manual - Page 81
GUIDANCE - Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the next destination. : To preview the route to the - 2010 Toyota Matrix | Navigation Manual - Page 82
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2010 Toyota Matrix | Navigation Manual - Page 83
ROUTE GUIDANCE 88 - 2010 Toyota Matrix | Navigation Manual - Page 84
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use D Quick reference ("Menu" screen) D Quick reference ("Setup" screen) D Suspending and resuming guidance D Volume D User selection 4 90 91 92 93 94 D My places 96 Registering memory points ...97 Editing - 2010 Toyota Matrix | Navigation Manual - Page 85
disc version or covered area...180 1 5 "Select User" Up to 3 different settings for different users can be memorized...94 6 "XM NavTraffic" Sets XMr NavTraffic information...120 7 "Setup" Enables various settings for the navigation system...91, 110 8 "My Places" Enables changes to "Memory points - 2010 Toyota Matrix | Navigation Manual - Page 86
the destination on the route guidance screen can be set...111 3 "Keyboard Layout" Key layout can be changed...112 4 "Time Zone" The desired time zone can be selected...113 Function" " The choice whether be set in all modes...116 10 "Auto Voice Guidance" Automatic voice guidance can be set...117 91 - 2010 Toyota Matrix | Navigation Manual - Page 87
either ON or OFF to display the pop−up message is possible...117 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...118 13 "Default" This touch screen button initializes all of the settings...110 14 "?" Function help for the "Setup" screen can be viewed...29 - 2010 Toyota Matrix | Navigation Manual - Page 88
off. 2. Touch "Resume Guidance". 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the is not needed, touch "OFF" to disable the feature. When selected the number or "OFF" will be highlighted. 3. Touch "OK" to - 2010 Toyota Matrix | Navigation Manual - Page 89
ADVANCED FUNCTIONS User selection INFORMATION During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 - 2010 Toyota Matrix | Navigation Manual - Page 90
ADVANCED FUNCTIONS D To register D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". 2. To register, touch "Yes". To return to the previous screen, touch "No" or . - 2010 Toyota Matrix | Navigation Manual - Page 91
ADVANCED FUNCTIONS My places - D To delete user Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 46, " - Destination search by Quick access" on page 46 and " - Destination search by Memory" on - 2010 Toyota Matrix | Navigation Manual - Page 92
ADVANCED FUNCTIONS - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. On this screen, the following operations can be performed. 1 Registers memory points (See " - Registering memory points" on page 97.) 2 Edits memory points (See " - Editing memory - 2010 Toyota Matrix | Navigation Manual - Page 93
can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To edit registered information, see " - Editing memory points" on page 98. INFORMATION Up to 106 memory points can be registered. 3. Touch "Edit". 4. Touch the desired memory point button. 98 - 2010 Toyota Matrix | Navigation Manual - Page 94
ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 5. memory point names. The names can be displayed on the map. (See page 101.) "Location": To edit location information. (See page 102.) "Phone #": To edit telephone numbers. (See page 103.) 6. Touch "OK". 2. Touch - 2010 Toyota Matrix | Navigation Manual - Page 95
sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory points with a set return to the previous screen, touch "No" or . INFORMATION One "Home" and five "Quick Access" can be set. 100 - 2010 Toyota Matrix | Navigation Manual - Page 96
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch " - 2010 Toyota Matrix | Navigation Manual - Page 97
ADVANCED FUNCTIONS DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch "OFF". 2. - 2010 Toyota Matrix | Navigation Manual - Page 98
ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 2. Enter the number using - 2010 Toyota Matrix | Navigation Manual - Page 99
Places" on the "Menu" screen. When registration of home is completed, the "Memory Point" screen will be displayed. 5. Touch "OK". To edit registered information, see " - Editing memory points" on page 98. 3. Touch "Register". 4. Enter the location in the same way as for a destination search. (See - 2010 Toyota Matrix | Navigation Manual - Page 100
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My - 2010 Toyota Matrix | Navigation Manual - Page 101
" screen. 7. Touch either or to change the size of the area to be avoided. 8. Touch "OK". INFORMATION D If a destination is input in the area to avoid or the route calculation cannot be made without running - 2010 Toyota Matrix | Navigation Manual - Page 102
be displayed on the map. (See page 107.) "Location": To edit area location. (See page 108.) "Area Size": To edit area size. (See page 109.) "Active": To turn on or off the area to avoid feature. To turn on the feature touch "ON" on the "Edit Area to Avoid" screen. To turn off the - 2010 Toyota Matrix | Navigation Manual - Page 103
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. To show the name, touch "ON" on the "Edit Area to Avoid" screen. To not - 2010 Toyota Matrix | Navigation Manual - Page 104
" on the "Edit Area to Avoid" screen. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the button to be deleted. "Delete All": To - 2010 Toyota Matrix | Navigation Manual - Page 105
the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The previous screen will be displayed. INFORMATION To reset all setup items, touch "Default". 110 - 2010 Toyota Matrix | Navigation Manual - Page 106
FUNCTIONS D Unit of Measurement Unit of Measurement can be changed. 1. Push the "MENU" button. 2. Touch "Setup Touch "OK". 3. Touch "Set Speed" of the "Estimated Travel Time". INFORMATION This function is available only in English or Spanish. To switch language, see "Selecting a language" - 2010 Toyota Matrix | Navigation Manual - Page 107
Input key layout INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on the selected work. D It is possible to display up to 99 hours 59 minutes. Key layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. - 2010 Toyota Matrix | Navigation Manual - Page 108
. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. " "ABC" type 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. " "QWE" type The selected button is highlighted. 4. Touch "OK". 4. Touch the - 2010 Toyota Matrix | Navigation Manual - Page 109
current street name on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the icons to be displayed - 2010 Toyota Matrix | Navigation Manual - Page 110
ADVANCED FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To - 2010 Toyota Matrix | Navigation Manual - Page 111
all modes When the "Voice Guidance in All Modes" feature is turned on, the voice guidance in all modes can be heard. When the "Voice Guidance in All Modes " feature is turned off, voice guidance cannot be heard when using the audio system. - 2010 Toyota Matrix | Navigation Manual - Page 112
ADVANCED FUNCTIONS D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn the "Auto Voice - 2010 Toyota Matrix | Navigation Manual - Page 113
When the "Pop−up Message" is turned off, the following messages will not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Push the "MENU" button - 2010 Toyota Matrix | Navigation Manual - Page 114
ADVANCED FUNCTIONS POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either or to adjust the direction of the - 2010 Toyota Matrix | Navigation Manual - Page 115
allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, an additional genuine Toyota satellite receiver and antenna must be purchased and installed, and the subscription - 2010 Toyota Matrix | Navigation Manual - Page 116
on the guidance route, it may be possible for you to select another route offered by the system. (See page 123.) 3 Traffic Voice Guidance Traffic information is provided using voice guidance. (See page 124.) 4 Show Free Flowing Traffic Freely flowing traffic is shown by the arrow on the map. (See - 2010 Toyota Matrix | Navigation Manual - Page 117
" is selected. " Map screen 2 XMr NavTraffic information arrow When any XMr NavTraffic information has been received, the XMr NavTraffic information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow - 2010 Toyota Matrix | Navigation Manual - Page 118
, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the guidance route has been received (touch switch*). "Orange - 2010 Toyota Matrix | Navigation Manual - Page 119
through voice guidance while being guided to your destination. (d) Show Free Flowing Traffic Freely flowing traffic is shown with the arrow. Touch "ON" of the "Traffic Voice Guidance". Touch "ON" of the "Show Free Flowing Traffic". INFORMATION This function is available only in English. To - 2010 Toyota Matrix | Navigation Manual - Page 120
ADVANCED FUNCTIONS (e) XMr NavTraffic text information When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. 1. Touch "Info." to display the "Traffic Information" screen. 2. Touch "Detail" to display detailed traffic event - 2010 Toyota Matrix | Navigation Manual - Page 121
ADVANCED FUNCTIONS 126 - 2010 Toyota Matrix | Navigation Manual - Page 122
OTHER FUNCTIONS SECTION OTHER FUNCTIONS Other functions D Maintenance information Maintenance information setting ...Dealer setting ...D Calendar with memo Adding a memo ...Editing a memo ...Memo list ...D Screen adjustment D Screen setting D Beep setting D Selecting a language 5 128 128 130 132 - 2010 Toyota Matrix | Navigation Manual - Page 123
130.) If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color will change to orange. 128 - 2010 Toyota Matrix | Navigation Manual - Page 124
linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter "PERSONAL": New information items can be created separately from provided ones - 2010 Toyota Matrix | Navigation Manual - Page 125
setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on the "Maintenance" screen. 5. Touch the button to be edited - 2010 Toyota Matrix | Navigation Manual - Page 126
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will - 2010 Toyota Matrix | Navigation Manual - Page 127
OTHER FUNCTIONS Calendar with memo - D To edit "Phone #" (telephone number) 1. Touch "Phone #" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 25.) Memos can also be - 2010 Toyota Matrix | Navigation Manual - Page 128
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2010 Toyota Matrix | Navigation Manual - Page 129
See page 25.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date you want to add a memo on the "Calendar" "Add Memo". Up to 100 memos can be added. 7. When registering information on the memo, touch "Location". A screen similar to the destination search - 2010 Toyota Matrix | Navigation Manual - Page 130
a condition. 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch "List" on the "Calendar" screen. 4. Touch the memo To edit a memo. (See " - Adding a memo" on page 134.) "Location": To change a registered location. (See " - Adding a memo" on page 134.) "Enter ": To - 2010 Toyota Matrix | Navigation Manual - Page 131
OTHER FUNCTIONS D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 5. To delete and/or edit the memo, touch the desired memo button. "Delete All": To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the - 2010 Toyota Matrix | Navigation Manual - Page 132
contrast of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness The selected screen appears. 1. Push the "DISP/TILT" button. INFORMATION When you do not touch any button on the "Display" screen for 20 seconds, the previous - 2010 Toyota Matrix | Navigation Manual - Page 133
the day mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting - 2010 Toyota Matrix | Navigation Manual - Page 134
return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio screen 20 seconds after the end of audio screen operation - 2010 Toyota Matrix | Navigation Manual - Page 135
deleted or returned to their default settings: D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings This function is available only when the vehicle is not moving. 1. Touch "Delete personal data - 2010 Toyota Matrix | Navigation Manual - Page 136
You can set a beep sound off. Selecting a language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. 1. Push the "INFO" button. 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off - 2010 Toyota Matrix | Navigation Manual - Page 137
çais" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 142 - 2010 Toyota Matrix | Navigation Manual - Page 138
AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system D Quick reference D Using your audio system Some basics ...Radio operation ...CD player operation ...D Audio remote controls D Audio system operating hints 6 144 145 145 149 158 169 170 143 - 2010 Toyota Matrix | Navigation Manual - Page 139
screen, push the "AUDIO" button. 1 2 Function menu display screen To control the radio or CD player, touch the touch screen buttons. For details, see page 147. "AUDIO" button Push this button to display the audio control screen. For details, see page 146. " " button Push this button to - 2010 Toyota Matrix | Navigation Manual - Page 140
features of your audio system. Some information may not pertain to your system. Your audio system works when the engine switch is in "ACC" or "ON" position. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes laser. Use of controls or adjustments or - 2010 Toyota Matrix | Navigation Manual - Page 141
Push this button to display touch screen buttons for audio system (audio control mode). "PWR·VOL": Push this knob to turn the audio system You can select the function that enables automatic return to the previous screen from the audio screen. See "(a) Automatic transition" on page 139 for details. - 2010 Toyota Matrix | Navigation Manual - Page 142
AUDIO SYSTEM Touch them lightly and directly on the screen. The selected button is highlighted. INFORMATION D If the system does not respond to a touch of a touch screen button, move your for radio and CD player operation are displayed on the screen when the audio control mode is selected. 147 - 2010 Toyota Matrix | Navigation Manual - Page 143
treble and bass. A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing - 2010 Toyota Matrix | Navigation Manual - Page 144
track 1 again. D Listening to the radio NOTICE Never try to disassemble or oil any part of the CD player. Do not insert anything other than discs ·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual". Push these buttons to choose either an AM or FM station. "AM", "FM1" - 2010 Toyota Matrix | Navigation Manual - Page 145
SEEK/TRACK" button to step up or step down the station band. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the button. Each radio mode can store up to 6 stations. To change the preset station to a different one, follow the same procedure. - 2010 Toyota Matrix | Navigation Manual - Page 146
web at www.xmradio.com or call 1−800−967−2346. Canada- Visit on the web at www.xmradio.ca or call 1−877−438−9677. The XMr Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the - 2010 Toyota Matrix | Navigation Manual - Page 147
Toyota's satellite radio tuners are awarded Type Approval Certificates from XMr Satellite Radio Inc. as proof of compatibility with the services ID when activating XMr service or when reporting a problem. If you select SAT3" appears on the display. INFORMATION Cargo loaded on the roof luggage - 2010 Toyota Matrix | Navigation Manual - Page 148
button and the name and number of the channel appears on the touch screen button. Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power source is interrupted by battery - 2010 Toyota Matrix | Navigation Manual - Page 149
AUDIO SYSTEM D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector button (1 - 6) for the channel you want. The button (1 - 6) is highlighted and channel number appears on the display. To select channel within the current - 2010 Toyota Matrix | Navigation Manual - Page 150
AUDIO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "TEXT" again, the display returns. 155 - 2010 Toyota Matrix | Navigation Manual - Page 151
longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or ANTENNA NO SIGNAL LOADING OFF AIR Contact the XMr Listener 1−877−438−9677 (Canada). 156 - 2010 Toyota Matrix | Navigation Manual - Page 152
with the instructions, may cause dealer or an experienced radio/TV technician for help. Information to user Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services - 2010 Toyota Matrix | Navigation Manual - Page 153
CD, CD text ...161 D MP3/WMA disc ...164 For appropriate discs for this changer, see "Audio system operating hints" on page 170. (a) Inserting discs The engine switch must be set at "ACC" or "ON" position. 1. Push the " " button. 158 - 2010 Toyota Matrix | Navigation Manual - Page 154
, as such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display closed. D Take care not to jam your hand while the display is - 2010 Toyota Matrix | Navigation Manual - Page 155
AUDIO SYSTEM (b) Ejecting discs (c) Playing a disc Push the " " button. The display will open and disc will be ejected. A disc can then be inserted. Push the "DISC·AUX" button if the disc are already loaded in the CD player. The "CD" screen will be displayed. NOTICE If a disc cannot be - 2010 Toyota Matrix | Navigation Manual - Page 156
, the CD player will start playing the selected track from the beginning. "TRACK LIST": The desired track can be selected from a list. This function is available only when the vehicle is not moving. Touch "TRACK LIST". The track list is displayed. 161 - 2010 Toyota Matrix | Navigation Manual - Page 157
AUDIO SYSTEM D Searching for a desired track Touch the desired track number. The CD player will start playing the selected track from the beginning. : By touching this button, the list moves up by 6 track groups. If this button is touched when the top page of the list is displayed, the last page - 2010 Toyota Matrix | Navigation Manual - Page 158
−TEXT disc is inserted, the title of the disc and track will be displayed. Up to 29 letters can be displayed. "RPT": Use it for automatic repeat of the track or disc you are currently listening to. While the track is playing, touch "RPT" briefly. "RPT" appears on the screen. When - 2010 Toyota Matrix | Navigation Manual - Page 159
folder. "FOLDERB": Touch this button to go to the previous folder. "FOLDER LIST": The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "FOLDER LIST". The folder list is displayed. Push the "AUDIO" button and touch a MP3/WMA disc number - 2010 Toyota Matrix | Navigation Manual - Page 160
AUDIO SYSTEM D Selecting a desired file "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. "TUNE·SEEK/TRACK" button: Use for direct access to a desired file. - 2010 Toyota Matrix | Navigation Manual - Page 161
displayed, the top page is displayed. "FOLDER": The folder list is displayed. "DETAIL": Details of the file currently playing is displayed. This function is available only when the vehicle is not moving. While the disc is playing, touch "SCAN" briefly. "SCAN" appears on the screen. The changer will - 2010 Toyota Matrix | Navigation Manual - Page 162
the program of your choice, touch "SCAN" once again. After all the folders are scanned in one pass, normal play resumes. "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - While the file is playing, touch"RPT" briefly. "RPT" appears on the - 2010 Toyota Matrix | Navigation Manual - Page 163
it for automatic and random appears on the display: The following causes are possible. D There is a trouble inside the system. Eject the disc. D The inside of the player unit may If the malfunction is not rectified: Take your vehicle to your dealer. If an MP3/WMA disc contains CD−DA files, only CD− - 2010 Toyota Matrix | Navigation Manual - Page 164
system changes the audio mode. To turn the audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until you hear a beep. Some parts of the audio system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls - 2010 Toyota Matrix | Navigation Manual - Page 165
easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electrical motors. This results in static. reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your - 2010 Toyota Matrix | Navigation Manual - Page 166
way as an ID3 tag. WMA tags carry information such as track title, artist name. D The emphasis function is available only when playing MP3/WMA files recorded at 22.05, and 24 kHz. However, the emphasis function is not available for files recorded at these frequencies.) D The sound quality of MP3/ - 2010 Toyota Matrix | Navigation Manual - Page 167
AUDIO SYSTEM CD−R AND CD−RW DISCS D CD−R/CD−RW discs that have not 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.wma 005.mp3 Folder 3 006.mp3 D D The play order of the compact disc with the structure shown on the left is as follows: D D D D been subject to the "finalizing process" (a - 2010 Toyota Matrix | Navigation Manual - Page 168
player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperature can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or other vibrations may make your CD player skip. D If moisture - 2010 Toyota Matrix | Navigation Manual - Page 169
AUDIO SYSTEM " Special shaped discs " Labeled discs NOTICE D Do not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system - 2010 Toyota Matrix | Navigation Manual - Page 170
of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in lint−free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, - 2010 Toyota Matrix | Navigation Manual - Page 171
editing functions. Although the tags are restricted to the number of characters, the information can be viewed when the track is played back. WMA Tag- WMA files Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio - 2010 Toyota Matrix | Navigation Manual - Page 172
APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 7 178 180 177 - 2010 Toyota Matrix | Navigation Manual - Page 173
APPENDIX Limitations of the navigation system This navigation system calculates the current vehicle position using satellite signals, various vehicle signals, map data, etc. However, the accurate position may not be shown depending on the satellite condition, road configuration, vehicle condition - 2010 Toyota Matrix | Navigation Manual - Page 174
reroute, the route guidance may not be available for the next turn to the right or left. D It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown - 2010 Toyota Matrix | Navigation Manual - Page 175
APPENDIX Map database information and updates - After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 120.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires - 2010 Toyota Matrix | Navigation Manual - Page 176
to the DATABASE. The DATABASE comprises confidential and proprietary information and materials of TANA. Accordingly, you shall hold the copy, duplicate, modify, adapt, translate, disassemble, decompile, or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to - 2010 Toyota Matrix | Navigation Manual - Page 177
, EXPRESS OR OR COSTS OF COVER, information due to the passage of time, changing information relating to, among other things, neighborhood safety; law enforcement; emergency assistance; construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight - 2010 Toyota Matrix | Navigation Manual - Page 178
that provides greater limitations on the Government's rights shall control. Contractor/manufacturer is Tele Atlas North America, Inc., Information Act, or equivalent, which permits public access and/or reproduction or use of the Licensed Products. In the event that such exemption is challenged - 2010 Toyota Matrix | Navigation Manual - Page 179
Canada, © Queen's Printer for Ontario, © Canada Post Corporation, GeoBaseR. NAVTEQ holds a non−exclusive license from the United States Postal ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2007. Prices are not established, controlled or reverse engineer any portion - 2010 Toyota Matrix | Navigation Manual - Page 180
or incomplete information due to the passage of time, changing circumstances, representations or warranties of any kind, express or implied, arising by law or INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED - 2010 Toyota Matrix | Navigation Manual - Page 181
Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You - 2010 Toyota Matrix | Navigation Manual - Page 182
service bureau, time−sharing or other similar purposes. You may not modify the information or remove any copyright notices that appear on the information in any way. You may not decompile, disassemble or reverse engineer any portion of this information of any kind, express or implied, arising by - 2010 Toyota Matrix | Navigation Manual - Page 183
cost change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing - 2010 Toyota Matrix | Navigation Manual - Page 184
APPENDIX - Changing the map DVD−ROM 1. Push the "MENU" button. 4. Insert the new map DVD−ROM with the label side up. 5. Push the "CLOSEY" button to close the display. 2. Touch "Map DVD". 3. Touch " DVD". 189 - 2010 Toyota Matrix | Navigation Manual - Page 185
DVD". INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. Make sure the version of the database on this screen. To display the disc coverage area, touch "Covered Area". Confirm the covered area on the screen. Contact your Toyota dealer to - 2010 Toyota Matrix | Navigation Manual - Page 186
manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories in an efficient manner. guide you there. The system will provide both a visual map and audio instructions. The audio instructions - 2010 Toyota Matrix | Navigation Manual - Page 187
their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 178 through 179. 2 - 2010 Toyota Matrix | Navigation Manual - Page 188
and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons are dimmed - 2010 Toyota Matrix | Navigation Manual - Page 189
maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may provide wrong information such as the direction of a one way street. While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is - 2010 Toyota Matrix | Navigation Manual - Page 190
Quick guide - - Overview buttons and guidance screen 0U5111aX No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button "MENU" button "DISP/TILT" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2010 Toyota Matrix | Navigation Manual - Page 191
by touching "ON""". Touch this button to magnify the map scale. Touch this button to display the foot print map and the building information. Touch this button to change the screen mode. Page 128, 132, 138, 141 37 31 76, 78 82, 84, 85, 86 9 10 11 12 "AAOFF" 114 13 14 - 2010 Toyota Matrix | Navigation Manual - Page 192
- Registering home 1 Push the "DEST" button. 0U5115X 2 Touch . If home has not been registered, you can register it by touching . 3 There are 11 different methods to search your home. See "Destination search" on page 43. 4 Touch "Enter". The "Memory Point" screen is displayed. 7 - 2010 Toyota Matrix | Navigation Manual - Page 193
5 Touch "OK". Registration of home is complete. You can also register home by pushing the "MENU" button. (See " - Registering home" on page 104.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) 8 - 2010 Toyota Matrix | Navigation Manual - Page 194
- Registering preset memory points (Quick access) 1 Push the "DEST" button. 0U5115X 2 Touch one of the quick access buttons. You can set a memory point to one of the quick access buttons which has not been set. 3 There are 12 different methods to search preset memory points. See "Destination - 2010 Toyota Matrix | Navigation Manual - Page 195
points is complete. You can also register preset memory points by pushing the "MENU" button. (See " - Registering memory points" on page 97.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) The registered points can be used on the - 2010 Toyota Matrix | Navigation Manual - Page 196
to search destinations. See "Destination search" on page 43. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 65.) 5 Guidance to the - 2010 Toyota Matrix | Navigation Manual - Page 197
. (To register "Home", see " - Registering home" on page 104.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 65.) 5 Guidance to the