2010 Toyota Sequoia Navigation Manual - Page 338

09 01.08 BASIC FUNCTIONS Display operation U502ADNS 1U5082aX 1. Push the "DISP/TILT" button. 1U5063F 2. Touch "TILT". Adjustment of the angle of the display can be done by touching "TILT". Each touch "TILT" will tilt the display to positions 1 , 2 , 3 and then back to 0 in the reverse order. If the engine switch is set at OFF, the display will automatically move back to position 0 . The display will automatically resume the previous position when the engine switch is in "ACC" or "ON" position. CAUTION Injury may result from placing a hand or any fingers on the display while it is moving. INFORMATION To adjust the screen settings such as brightness, see "Screen adjustment" on page 135. NOTICE Do not place any foreign objects on the display while it is moving. It could damage your navigation system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 22 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U)