2010 Toyota Sienna Navigation Manual
2010 Toyota Sienna Manual
2010 Toyota Sienna manual content summary:
- 2010 Toyota Sienna | Navigation Manual - Page 1
SIENNA CUSTOMER EXPERIENCE CENTER 1-800-331-4331 2 0 1 0 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 4/09 08-TCS-03048 00505-NAV10-SIE - 2010 Toyota Sienna | Navigation Manual - Page 2
to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage you to review the Navigation Owner's Manual so you will have a better understanding of the - 2010 Toyota Sienna | Navigation Manual - Page 3
SEEK S EEK K AM • SA AM• SAT AT FM DISC DI ISC•AU AUX UX 9 TRACK T RACK K 1 MENU M ENU DEST D EST T 2 M and Suspend Guidance. DESTINATION Button Input the destination by one of the map scrolling feature, or display screen for best viewing. INFO MODE Icon Touch to change the map display between - 2010 Toyota Sienna | Navigation Manual - Page 4
touch . step 3. To change Search Area, touch and move to step 2. step 3 Input the house number. step 4 Touch and input the to see street name. Touch all of the available options. Quick Tip - Enter the street name without prefixes such as North or the letter N. The system will display all of - 2010 Toyota Sienna | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Use or to scroll up or down. Touch the desired city. Then touch the desired street. step 8 Select the desired Route Preference - 2010 Toyota Sienna | Navigation Manual - Page 6
zero zero" 32307, say: "Three two three zero seven" BY ADDRESS - VOICE RECOGNITION step 5 1 Press the voice command button on the steering wheel. After the beep say, "Address." step 2 The system will confirm your input by repeating "Address" and displaying the command at the top of the screen. - 2010 Toyota Sienna | Navigation Manual - Page 7
INPUT BY ADDRESS - VOICE RECOGNITION step 3 Press the voice command button on the steering wheel. After the beep say the state name. step 4 Press the voice command button on the steering wheel. After the beep say the city name. step 5 Press the voice command button on the steering wheel - 2010 Toyota Sienna | Navigation Manual - Page 8
- POINTS OF INTEREST (POI) POINTS OF INTEREST BY NAME step 1 Press the DEST panel button followed by . step 2 Input the POI name and touch . step 3 or to scroll up Use or down. Touch the desired destination. step 4 See page 15 to select desired Route - 2010 Toyota Sienna | Navigation Manual - Page 9
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by . step 2 Touch to search for points of interest in the vicinity. step 3 Touch the desired category icon. step 4 Touch the desired sub- - 2010 Toyota Sienna | Navigation Manual - Page 10
INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press the voice command button on the steering wheel command button on the steering wheel. After the beep say, "Add to destination" or "Replace destination." To see a list say, "Show list." step 3 Touch - 2010 Toyota Sienna | Navigation Manual - Page 11
REGISTERED ADDRESSES step 1 Press the DEST panel button followed by . step 2 Touch . step 3 Input the area code and telephone number followed Personal telephone numbers cannot be used for Destination input unless previously added in the Address Book. step 5 See page 15 to select desired - 2010 Toyota Sienna | Navigation Manual - Page 12
panel button followed by address. . Touch step 2 Make sure that you are in the desired Search Area. Touch . to input your home step 3 Input home instead of your actual home address. Touch and input the street name. Touch to see all of the available options. step 5 Use or to scroll up or - 2010 Toyota Sienna | Navigation Manual - Page 13
arrow keys to adjust the position on the map. Touch to confirm the position. step 9 Touch at the top left of the screen to change the home icon. step 10 Touch the desired icon for your home. step 11 Touch at the bottom of the screen. 12 - 2010 Toyota Sienna | Navigation Manual - Page 14
3 Touch . step 4 Touch . step 5 In the approved Bluetooth cell phone, input the passkey listed on the screen. Please refer to the cell phone manufacturer's owner's manual for pairing procedures. step 6 Upon connection, the system will indicate that the pairing process was successful. 13 - 2010 Toyota Sienna | Navigation Manual - Page 15
command button on the steering wheel. After the beep say, "Dial." If the incorrect number has been inputted or if you wish not to complete the call, touch . step 4 The call is active after changes to . Some Bluetooth equipped cell phones may or may not show battery or signal strength on the - 2010 Toyota Sienna | Navigation Manual - Page 16
most direct route based upon driven mileage. The system does not account for traffic signals or traffic flow. SCREEN PREFERENCES Single Map Mode Dual Map Mode Compass Mode Touch to select from seven different screen viewing options. Three screen preferences are available when the map is visible and - 2010 Toyota Sienna | Navigation Manual - Page 17
INFO > SCREEN SETTING Touch to prevent the system from reverting to the map display. Once the such as Gas Stations, Restaurants or Hotels can be viewed during your trip. To access this feature, select Freeway feature is only available while in Route Guidance and travelling on a freeway or Toll - 2010 Toyota Sienna | Navigation Manual - Page 18
Navigation Owner's Manual for a complete description of this feature. * The system does not account for traffic signals or traffic flow. OPERATION OF VEHICLE EMERGENCY SCREEN Press the DEST panel button followed by to access four emergency destinations: • Police Stn. • Hospital • Dealer • Fire Stn - 2010 Toyota Sienna | Navigation Manual - Page 19
The navigation system voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the system database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every - 2010 Toyota Sienna | Navigation Manual - Page 20
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation D Display operation D Initial screen D Touch screen operation D Inputting letters and numbers/list screen operation D Function help D Map screen operation Current position display ...Screen scroll operation ...Switching the - 2010 Toyota Sienna | Navigation Manual - Page 21
objects on the display while it is moving. It could damage your navigation system. Adjustment of the angle of the display can be done by pushing the 1 , 2 , 3 and then back to 0 in the reverse order. If the engine switch is in the "LOCK" position, the display will automatically move back to position - 2010 Toyota Sienna | Navigation Manual - Page 22
and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. on the "Information" screen are touched, the screen will change back to "CAUTION" screen and then change to the map screen in about 5 seconds later or - 2010 Toyota Sienna | Navigation Manual - Page 23
BASIC FUNCTIONS D Maintenance information This system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the " - 2010 Toyota Sienna | Navigation Manual - Page 24
can be input via the touch screen. INFORMATION Key layout can be changed. (See "D Input key layout" on page 110.) INFORMATION D If the system does not respond dark and hard to see. If so, change the angle of the screen, look at the screen from different angles, adjust the screen settings on the " - 2010 Toyota Sienna | Navigation Manual - Page 25
To display the alphabet keys, touch "A−Z" or " D To input numerals and symbols To display the number keys and symbol keys, touch "0−9". ". Enter letters by touching the alphabet keys directly. Touching this touch screen button - 2010 Toyota Sienna | Navigation Manual - Page 26
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. If appears to the right of the item name, the complete name is too long for the display. Touch to scroll - 2010 Toyota Sienna | Navigation Manual - Page 27
alphabetical order by name. 2. Select the desired sorting criteria. Sorting criteria are as follows: "Distance": To sort in the order of distance from your current location. "Date": To sort in the order of the date. "Category": To sort in the order of the category. "Icon": To sort in the order of - 2010 Toyota Sienna | Navigation Manual - Page 28
operation - - Current position display When starting the navigation system, the current position is displayed first. This screen displays to this map screen that shows your current position at any time from any screen by pushing the "MAP/ VOICE" button. While driving, the current vehicle position - 2010 Toyota Sienna | Navigation Manual - Page 29
position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see "D Current position/ tire change calibration" on page 117. Use the scroll feature to move the desired point to the center of - 2010 Toyota Sienna | Navigation Manual - Page 30
feature is used, the current vehicle position mark may disappear from the screen. Move the map with a one−touch scroll again or push the "MAP/VOICE" button to return to the current vehicle position map location "Enter ". The screen changes and displays the map location of the selected destination and - 2010 Toyota Sienna | Navigation Manual - Page 31
touch "Mark", the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 96. Up to 106 memory points can be registered. If there is an attempt - 2010 Toyota Sienna | Navigation Manual - Page 32
touched, the position of the cursor is set as a destination. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To register this POI as a memory point, touch "Mark". (See - 2010 Toyota Sienna | Navigation Manual - Page 33
BASIC FUNCTIONS - Switching the screens DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Any one of the screen configurations can be selected. 1. Touch this touch screen button to display the following screen. Touch - 2010 Toyota Sienna | Navigation Manual - Page 34
the intersection guidance screen or the guidance screen on the freeway. (See page 69.) D Screen configurations SINGLE MAP This is a regular map screen. While on a different screen, touching will display the single map screen. The screen - 2010 Toyota Sienna | Navigation Manual - Page 35
. While on a different screen, touching will display the compass mode screen. The screen shows the dual map. The in the direction of the destination. When driving, refer to the longitude and latitude coordinates : 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation - 2010 Toyota Sienna | Navigation Manual - Page 36
normally. By continuing to touch the touch screen button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving. The map scale is displayed under the north−up symbol or heading−up symbol at the top left - 2010 Toyota Sienna | Navigation Manual - Page 37
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 1. Touch "Info." while the foot print map is displayed. If the map is - 2010 Toyota Sienna | Navigation Manual - Page 38
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from north−up to heading−up by touching the orientation symbol at the top left of the screen. Touch or . " North−up screen " Heading−up - 2010 Toyota Sienna | Navigation Manual - Page 39
BASIC FUNCTIONS 40 - 2010 Toyota Sienna | Navigation Manual - Page 40
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search D Quick reference ("Destination" screen) D Destination search Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI* Name" ... - 2010 Toyota Sienna | Navigation Manual - Page 41
. 1 "Address" A house number and the street address can be input by using the input keys...47 2 "POI Name" Select one of the many POIs (Points service points that are already stored in the system's database can be selected...58 7 "Map" A destination can be selected simply by touching the location - 2010 Toyota Sienna | Navigation Manual - Page 42
for the "Destination" screen can be viewed on this screen...29 11 "Change" To change the search area, touch this touch screen button...44 12 Quick access ...62 Push the "DEST" button. You can use one of 13 different methods to search your destination. (See pages 46 through 62.) INFORMATION - 2010 Toyota Sienna | Navigation Manual - Page 43
SEARCH AREA ON THE INPUT SCREEN Change the search area in order to set a destination from a different area by using "Address", "POI Name", "Freeway Ent./ Exit", or "Intersection". 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 areas - 2010 Toyota Sienna | Navigation Manual - Page 44
Hampshire New Jersey New York Rhode Island Vermont "US9" Washington, D.C. Delaware Maryland Pennsylvania Virginia West Virginia Florida Georgia "US10" North Carolina South Carolina "HI" Hawaii Canada Button "CAN" Provinces and regions included in the search area All provinces and regions in - 2010 Toyota Sienna | Navigation Manual - Page 45
quick access touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See " to your home if "Enter" is touched even while driving. INFORMATION Guidance starts from the current vehicle position to the quick - 2010 Toyota Sienna | Navigation Manual - Page 46
numerals directly on the screen to input a house number. After inputting a house number, touch "OK" to display the screen for inputting a street name. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2. Input the street name and touch - 2010 Toyota Sienna | Navigation Manual - Page 47
displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) If the same address exists in more than one city, the current screen changes to the city list screen. If inputting a street name first, the screen changes. The house number - 2010 Toyota Sienna | Navigation Manual - Page 48
a city name. To search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch - 2010 Toyota Sienna | Navigation Manual - Page 49
5 CITIES 2. Touch the touch screen button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 47.) Touch the touch screen button of the desired city - 2010 Toyota Sienna | Navigation Manual - Page 50
page 80.) 4. Touch the touch screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) When inputting the name of a specific Point of Interest, and there are two or more - 2010 Toyota Sienna | Navigation Manual - Page 51
by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 3. Touch the touch screen button of the desired city name from the displayed list. INFORMATION D To change the search area, touch "Search Area". D To - 2010 Toyota Sienna | Navigation Manual - Page 52
DESTINATION SEARCH SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". SELECTING FROM THE LAST 5 CITIES 2. Touch the touch screen button of the desired city name. Touch the touch screen button of the desired city name. If the navigation has not be used, no cities will be displayed - 2010 Toyota Sienna | Navigation Manual - Page 53
all POI categories. 3. Set the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set point from any destination It is possible to display the names of POIs located within approximately 20 miles (32 km) from the selected search point. - 2010 Toyota Sienna | Navigation Manual - Page 54
AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. 2. Input the city center name. 3. Touch the touch screen button of the desired city center name. When an arrow facing the desired point is touched, the - 2010 Toyota Sienna | Navigation Manual - Page 55
DESTINATION SEARCH SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. When an arrow facing the desired point is touched, the map scrolls in that direction. Releasing the finger from - 2010 Toyota Sienna | Navigation Manual - Page 56
. "Select Category": To return to the POI category selection screen. "Show List": To display the list of POIs in the selected categories. Select the touch screen button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See - 2010 Toyota Sienna | Navigation Manual - Page 57
touch screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2010 Toyota Sienna | Navigation Manual - Page 58
destination and the route preference. (See "Starting route guidance" on page 63.) The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route guidance" on page 63.) INFORMATION Guidance - 2010 Toyota Sienna | Navigation Manual - Page 59
. (See "Starting route guidance" on page 63.) 4. Touch the touch screen button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) 60 - 2010 Toyota Sienna | Navigation Manual - Page 60
the touch screen button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) "Input Name": An applicable list is displayed by touching this touch screen button and - 2010 Toyota Sienna | Navigation Manual - Page 61
63.) 3. Input a telephone number. 4. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected D If there is no match for the telephone number inputted, a list of identical numbers with different area codes will be displayed. D To set a memory - 2010 Toyota Sienna | Navigation Manual - Page 62
route guidance After inputting the destination, the screen changes and displays the map location of the selected system starts route search and displays recommended routes. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace - 2010 Toyota Sienna | Navigation Manual - Page 63
available if there is no road data for the specified location. D When setting the destination on a map with a scale larger than 0.5 miles (800 m), the map scale changes driving. If a traffic sign on the road has been changed, a trip by ferry, the route guidance shows a sea route. After you travel by - 2010 Toyota Sienna | Navigation Manual - Page 64
DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from three routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended - 2010 Toyota Sienna | Navigation Manual - Page 65
DESTINATION SEARCH 66 - 2010 Toyota Sienna | Navigation Manual - Page 66
ROUTE GUIDANCE SECTION ROUTE GUIDANCE Route guidance D Route guidance screen D Typical voice guidance prompts D Distance and time to destination D Setting and deleting destination Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route Search condition ...Detour - 2010 Toyota Sienna | Navigation Manual - Page 67
screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway information screen will be displayed. This screen displays the distance to the next junction and exit, or POIs in - 2010 Toyota Sienna | Navigation Manual - Page 68
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an entrance, exit, or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be - 2010 Toyota Sienna | Navigation Manual - Page 69
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays - 2010 Toyota Sienna | Navigation Manual - Page 70
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 1 "Proceed about 4 miles to the traffic circle." "In a quarter of a mile - 2010 Toyota Sienna | Navigation Manual - Page 71
−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished - 2010 Toyota Sienna | Navigation Manual - Page 72
the destination are displayed. When the vehicle is not on the guidance route, the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the distance and the estimated travel/arrival time from the current position to each - 2010 Toyota Sienna | Navigation Manual - Page 73
routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. Touch "Add". 3. Input an additional destination in the same way as the destination search. (See "Destination search" on - 2010 Toyota Sienna | Navigation Manual - Page 74
ROUTE GUIDANCE - Deleting destinations 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few - 2010 Toyota Sienna | Navigation Manual - Page 75
If "No" is touching, the previous screen will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate the route conditions of the route to the destination. 1. Touch - 2010 Toyota Sienna | Navigation Manual - Page 76
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 74 and 76.) 1. Touch "Route". 2. Touch "Detour". 77 - 2010 Toyota Sienna | Navigation Manual - Page 77
will calculate an entire new route to the destination. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the detour suggested - 2010 Toyota Sienna | Navigation Manual - Page 78
freeway.) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions which are to determine the route to the destination. 2. Touch "Start on/off. When searching for a route, the system will avoid routes for preferences that are deselected. 4. After choosing the conditions, - 2010 Toyota Sienna | Navigation Manual - Page 79
as gas stations and restaurants can be displayed on the map screen. You can also set their location as desired Point of Interest category to display POI location symbols on the map screen. By selecting of Interest, touch this touch screen button. The system will list the points within 20 miles (32 km - 2010 Toyota Sienna | Navigation Manual - Page 80
Icons" screen. When a Point of Interest category is selected from either the limited list or the complete list, the screen will display symbols at those locations on the map screen. D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will - 2010 Toyota Sienna | Navigation Manual - Page 81
and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 63.) 2. Touch "Route Overview". The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages - 2010 Toyota Sienna | Navigation Manual - Page 82
requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to the starting point will be displayed with the mileage to the next turn. These marks indicate the direction in which you should turn at an - 2010 Toyota Sienna | Navigation Manual - Page 83
miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 miles (50 km). : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to the previous destination or - 2010 Toyota Sienna | Navigation Manual - Page 84
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2010 Toyota Sienna | Navigation Manual - Page 85
ROUTE GUIDANCE 86 - 2010 Toyota Sienna | Navigation Manual - Page 86
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use D Quick reference ("Menu" screen) D Quick reference ("Setup" screen) D Suspending and resuming guidance D Volume D User selection 4 88 89 90 91 92 D My places 94 Registering memory points ...95 Editing - 2010 Toyota Sienna | Navigation Manual - Page 87
screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...270 5 "Select User" Up to 3 different settings for different users can be memorized...92 1 6 "Setup" Enables various settings for the navigation system...89, 108 7 "My Places" Enables changes to "Memory points - 2010 Toyota Sienna | Navigation Manual - Page 88
"km" or "miles" can be selected...109 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...109 3 "Keyboard Layout" Key layout can be changed...110 4 "Time Zone" The desired time zone can be selected...111 - 2010 Toyota Sienna | Navigation Manual - Page 89
in All Modes" Voice guidance can be set in all modes...115 11 "Auto Voice Guidance" Automatic voice guidance can be set...115 12 "Pop−up Message" Adjustment of the current vehicle position mark can be done manually, or mis−calculation by changing tire will be adjusted...117 14 "Default" This touch - 2010 Toyota Sienna | Navigation Manual - Page 90
The volume of the voice or turn off voice guidance can be adjusted. 2. Touch "Resume Guidance". 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate number - 2010 Toyota Sienna | Navigation Manual - Page 91
the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive /h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator will be highlighted. The system can memorize the following settings for up to - 2010 Toyota Sienna | Navigation Manual - Page 92
ADVANCED FUNCTIONS D To register D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". touch screen button that is already registered is touched, the following screen appears. To replace, touch "Yes". To cancel the replacement, touch "No" or . 93 - 2010 Toyota Sienna | Navigation Manual - Page 93
ADVANCED FUNCTIONS My places - D To delete user Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 46 and " - Destination search by Quick access" on page 46.) Registered areas are avoided at the - 2010 Toyota Sienna | Navigation Manual - Page 94
Deleting previous points" on page 108.) 9 Number of remaining memory points 10 Number of remaining areas to avoid 3. Touch "Register". 4. Enter the location in the same way as for a destination search. (See "Destination search" on page 43.) After memory point registration is completed, the "Memory - 2010 Toyota Sienna | Navigation Manual - Page 95
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To - 2010 Toyota Sienna | Navigation Manual - Page 96
ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. Name": To edit memory point names. The names can be displayed on the map. (See page 99.) "Location": To edit location information. (See page 100.) "Phone #": To edit telephone numbers. (See page 101.) 6. Touch "OK". - 2010 Toyota Sienna | Navigation Manual - Page 97
or to adjust the direction. Touch "Enter". The bell sounds only when the vehicle approaches this point in the direction that has been set. 3. To replace the attribute, touch "Yes". To return to the previous screen, touch "No" or . INFORMATION One "Home" and five "Quick access" can be set. 98 - 2010 Toyota Sienna | Navigation Manual - Page 98
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch " - 2010 Toyota Sienna | Navigation Manual - Page 99
name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch "OFF". 2. Touch the eight directional touch to screen button to move the - 2010 Toyota Sienna | Navigation Manual - Page 100
ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. 1. Push the be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 101 - 2010 Toyota Sienna | Navigation Manual - Page 101
completed, the "Memory Point" screen will be displayed. 5. Touch "OK". To edit registered information, see " - Editing memory points" on page 96. 3. Touch "Register". 4. Enter the location in the same way as for a destination search. (See "Destination search" on page 43.) 102 - 2010 Toyota Sienna | Navigation Manual - Page 102
Touch "My Places" on the "Menu" screen. 3. Touch "Delete". 4. To delete home, touch "Yes". To cancel the deletion, touch "No". 3. Touch "Register". 4. Enter the location in the same way as for a destination search, or display the map of the area to be avoided. (See "Destination search" on page 43 - 2010 Toyota Sienna | Navigation Manual - Page 103
area to avoid The name, location and/or area size of a registered area can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 6. Touch either or to change the size of the area to be avoided. 7. Touch "OK". INFORMATION D If a destination is input in the area to avoid - 2010 Toyota Sienna | Navigation Manual - Page 104
avoid. The names can be displayed on the map. (See page 105.) "Location": To edit area location. (See page 106.) "Area Size": To edit area size. (See page 107.) "Active": To turn on or off the area to avoid feature. To turn on the feature touch "ON" on the "Edit Area to Avoid" screen. To turn - 2010 Toyota Sienna | Navigation Manual - Page 105
to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. To show the name, touch "ON" on the "Edit Area to Avoid" screen. To not show it, touch "OFF". 2. Touch the eight directional touch to screen button to move the - 2010 Toyota Sienna | Navigation Manual - Page 106
" screen. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the touch screen button to be deleted. "Delete All": To delete all registered areas to avoid in the system - 2010 Toyota Sienna | Navigation Manual - Page 107
Previous Points". 1. Push the "MENU" button. 4. Touch the touch screen button you want to delete. "Delete All": To delete all previous points in the system. 2. Touch "Setup". 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The - 2010 Toyota Sienna | Navigation Manual - Page 108
ADVANCED FUNCTIONS D Distance unit Distance unit can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on "OK". 3. Touch "Set Speed" of the "Estimated Travel Time". INFORMATION This function is available only in English or Spanish. To switch language, see "Select language" on page 185. 4. - 2010 Toyota Sienna | Navigation Manual - Page 109
ADVANCED FUNCTIONS D Input key layout INFORMATION D The displayed time to the destination is the approximate driving time that is It is possible to display up to 99 hours 59 minutes. Key layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. Touch " - 2010 Toyota Sienna | Navigation Manual - Page 110
. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. " "ABC" type 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. " "QWE" type The selected button is highlighted. 4. Touch "OK". 4. Touch the - 2010 Toyota Sienna | Navigation Manual - Page 111
on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D Screen layout function ( D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the icons to be - 2010 Toyota Sienna | Navigation Manual - Page 112
ADVANCED FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To turn the "Display Building Shapes" - 2010 Toyota Sienna | Navigation Manual - Page 113
ADVANCED FUNCTIONS D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Restrict. Notification" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then - 2010 Toyota Sienna | Navigation Manual - Page 114
heard when using the audio/video system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch to display page 2 of the "Setup" screen. D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance - 2010 Toyota Sienna | Navigation Manual - Page 115
to display page 3 of the "Setup" screen. When the "Pop−up Message" is turned off, following messages are not displayed. This message appears when the system is in the POI mode and the map scale is over 0.5 mile (800 m). 3. Touch "ON" of "Pop−up Message". The selected button is highlighted - 2010 Toyota Sienna | Navigation Manual - Page 116
to display page 3 of the "Setup" screen. POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 1. Touch "Position/Direction - 2010 Toyota Sienna | Navigation Manual - Page 117
by the circumference difference between the old and new tires. If this procedure is not performed when tires are replaced, the current vehicle will be displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance - 2010 Toyota Sienna | Navigation Manual - Page 118
FUNCTIONS Other functions D Maintenance information Maintenance information setting ...Dealer setting ...D Calendar with memo Adding a memo ...Editing a memo ...Memo list ...D Hands−free system (for cellular phone) D Speech command system D Help screen D Screen adjustment D Screen setting D Beep - 2010 Toyota Sienna | Navigation Manual - Page 119
" - Dealer setting" on page 122.) If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color - 2010 Toyota Sienna | Navigation Manual - Page 120
engine oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF "SERVICE": Scheduled maintenance "AIR FILTER": Replace air - 2010 Toyota Sienna | Navigation Manual - Page 121
setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on the "Maintenance" screen. 5. Touch the touch screen button - 2010 Toyota Sienna | Navigation Manual - Page 122
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will - 2010 Toyota Sienna | Navigation Manual - Page 123
#" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 24.) Memos can also be used for route guidance if the memo has been registered with location information. 2. Enter the - 2010 Toyota Sienna | Navigation Manual - Page 124
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2010 Toyota Sienna | Navigation Manual - Page 125
- Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 24 100 memos can be added. 7. When registering information on the memo, touch "Location". A screen similar to the destination search screen appears. Search the same way as - 2010 Toyota Sienna | Navigation Manual - Page 126
the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 126.) "Location": To change a registered location. (See " - Adding a memo" on page 126.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page 63.) "Delete": To delete the memo - 2010 Toyota Sienna | Navigation Manual - Page 127
OTHER FUNCTIONS D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 5. To delete and/or edit the memo, touch the desired memo button. "Delete All": To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the - 2010 Toyota Sienna | Navigation Manual - Page 128
, this system can not function. CAUTION While you are driving, do not use a cellular phone or connect the Bluetoothr phone. By pushing the telephone switch above, you can receive a call or hang up without taking your hands off the steering wheel. NOTICE Do not leave your cellular phone in the car - 2010 Toyota Sienna | Navigation Manual - Page 129
on unpaved road. (Too much road noise.) D Driving at high speed. D Windows are open. D If air−conditioning vents are turned towards the microphone. D The sound of the air−conditioning fan is loud. 2 Indicates the condition of Bluetoothr connection. "Blue" indicates an excellent connection to - 2010 Toyota Sienna | Navigation Manual - Page 130
INFORMATION This system supports the following service. D box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. Bluetooth is a trademark owned by Bluetooth SIG, Inc. When you sell your car - 2010 Toyota Sienna | Navigation Manual - Page 131
. CAUTION FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the - 2010 Toyota Sienna | Navigation Manual - Page 132
: This transmitter must not be co−located or operated in conjunction with any other antenna or transmitter. (a) Enter a Bluetoothr phone To use the hands−free system, you need to enter your phone into the system. Once you have registered it, you can make a hands−free call. 1. Push the "INFO - 2010 Toyota Sienna | Navigation Manual - Page 133
input the Passkey displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". 4. Touch "Bluetooth∗" to display the "Bluetooth the system. ∗: Bluetooth is a registered trademark of Bluetooth SIG - 2010 Toyota Sienna | Navigation Manual - Page 134
OTHER FUNCTIONS D Connecting a Bluetoothr phone (i) Automatically (ii) Manually When the auto connection fails or is turned off, you have to connect Bluetoothr manually. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetoothr phone in a - 2010 Toyota Sienna | Navigation Manual - Page 135
You can call by inputting the telephone number. This cannot be operated while driving. Touch the desired key to input the telephone number. Each time you touch A, an inputted digit is deleted. When you touch , the number you called last is inputted. Touch or push the steering wheel. switch of the - 2010 Toyota Sienna | Navigation Manual - Page 136
You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. Touch the desired key to input the telephone number. 1. Touch "Phone Book" to display "Phone Book" screen. 1. Touch "Call Log" to - 2010 Toyota Sienna | Navigation Manual - Page 137
calls You can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. Touch or push the steering wheel. switch of the 1. Touch "Call Log" to display "Outgoing Call" screen - 2010 Toyota Sienna | Navigation Manual - Page 138
the phone book is received, the name and the number are displayed. D Received calls which you did not answer are also memorized in the system and " to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3". When you push the telephone button while driving, the screen above appears - 2010 Toyota Sienna | Navigation Manual - Page 139
by name You can call by giving a voice tag registered in the phone book. For setting the voice recognition, see "Setting the voice recognition" on . (For the operation and command of voice recognition, see "Speech command system" on page 175 and "Help screen" on page 178.) Push the talk switch. "After - 2010 Toyota Sienna | Navigation Manual - Page 140
entries can be displayed including the first searched one. Do the following to change the entry to the next one. D Touch "Next" D Push the talk talk switch switch of the steering wheel. D Touch "Cancel". (Except for recognizing the command) D Say "Cancel" You: System: Push the talk switch. "After - 2010 Toyota Sienna | Navigation Manual - Page 141
desired number. (vii) By POI call You: Push the talk switch. System: "Say numbers, pound, or star." You: "1234." System: "1234." "Push the talk switch." You: Push the talk switch. System: "Send? Say Yes or No." You: "Yes." System: "Sending." Now you are sending the tone. You can call by touching - 2010 Toyota Sienna | Navigation Manual - Page 142
: Touch or push the switch of the steering wheel. To mute your voice: Touch "Mute". To input a Key: Touch "0−9". To transfer the call Touch "Transfer Call". You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to Hands−free call, the - 2010 Toyota Sienna | Navigation Manual - Page 143
input the key. To hang up the phone: Touch or push the switch of the steering wheel. This cannot be operated while driving. If the continuous tone signal is registered in a phone book an answering machine or use a telephone service in bank for example. You can register the phone number and the code - 2010 Toyota Sienna | Navigation Manual - Page 144
speed tone You can send a tone by the speed tone. (For registering the speed tone, see "Registering the speed tone" on page 148.) (e) Change the settings of the Bluetoothr phone Touch "Settings" to display "Settings" screen. 1. Touch "Speed Tone". 2. Touch the desired switch to send a tone. You - 2010 Toyota Sienna | Navigation Manual - Page 145
OTHER FUNCTIONS (i) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. 4. Touch the - 2010 Toyota Sienna | Navigation Manual - Page 146
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. D Deleting all of the speed dial 1. Touch "Delete All" of "Speed Dial". 1. Touch "Delete" of "Speed Dial". 2. Touch " - 2010 Toyota Sienna | Navigation Manual - Page 147
can be registered. 4. Touch the desired touch screen button you want to register in. 1. Touch "Register" of "Speed Tone". 2. Use the software keyboard to input the name. 5. If you select a touch screen button you register before, this screen is displayed. Touch "Yes" if you want to overwrite it - 2010 Toyota Sienna | Navigation Manual - Page 148
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 4. Input the number and touch "OK". 1. Touch "Edit" of "Speed Tone". 2. Touch the touch screen button you want to edit. 3. Use the software keyboard to input the name. 149 - 2010 Toyota Sienna | Navigation Manual - Page 149
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. D Deleting all the speed tone 1. Touch "Delete All" of "Speed Tone". 1. Touch "Delete" of "Speed Tone". 2. Touch "Yes". 2. Touch the - 2010 Toyota Sienna | Navigation Manual - Page 150
OTHER FUNCTIONS (iii) Setting the volume D Automatic volume settings for high speed You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is under 43 mph (70 km/h), previous volume is back.) Each time you touch "Adaptive Volume Control", you can switch on or off. 1. - 2010 Toyota Sienna | Navigation Manual - Page 151
OTHER FUNCTIONS D Initializing the settings You can initialize the settings. (iv) Setting the screen Touch "Default". 1. Touch "Screen" to display the "Screen Settings" screen. Touch "Yes". 2. Do the detail settings of the screen and touch "OK". 152 - 2010 Toyota Sienna | Navigation Manual - Page 152
OTHER FUNCTIONS D Receiving Call Display You can select the method of the receiving call display. D Auto answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) after the preset time. Touch "Full" - 2010 Toyota Sienna | Navigation Manual - Page 153
the settings. When the engine switch is in the "ACC" or "ON" position and the Bluetoothr is automatically connected, the connection check is displayed. Touch "Default". Touch "Yes". Touch "ON" or "OFF" of "Show Bluetooth∗ connection status at start up". ∗: Bluetooth is a registered trademark of - 2010 Toyota Sienna | Navigation Manual - Page 154
telephone numbers in your Bluetoothr phone to the system. Up to 1000 person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. Touch "Phone Book" to display the "Phone Book Management" screen. 1. Touch "Transfer Data" to display "Select - 2010 Toyota Sienna | Navigation Manual - Page 155
". If the transferring is interrupted on the way, the phone book data transferred until then can be memorized in the system. 1. Touch "Register" of "Phone Book". 2. Touch the desired touch screen button to edit the phone book. 5. When this screen is displayed, the transfer is completed. 3. When - 2010 Toyota Sienna | Navigation Manual - Page 156
OTHER FUNCTIONS D Editing the name When you don't input the name, the number is displayed. D Editing the phone number You registered. 1. Touch "Name". 1. Touch "TEL1" or "TEL2". 2. Use the software keyboard to input the name. 2. Input the number and touch "OK". 3. Select the desired icon. 157 - 2010 Toyota Sienna | Navigation Manual - Page 157
OTHER FUNCTIONS D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find this contact when needed, by using the group display. You can select "No group" or "Group 01" to "Group 19". "No group" is displayed if you - 2010 Toyota Sienna | Navigation Manual - Page 158
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. D Editing the data You can edit the registered data. 1. Touch "Add to". 1. Touch "Edit". 2. Select the data you want to add log data to. 2. Select - 2010 Toyota Sienna | Navigation Manual - Page 159
OTHER FUNCTIONS D Deleting the data You can delete the data. When you release your car, delete all your data on the system. When you also touch "Edit" on this screen, you can edit it. 1. Touch "Delete" of "Phone Book". 2. Touch the desired touch screen button. 3. Touch "Yes". 160 - 2010 Toyota Sienna | Navigation Manual - Page 160
OTHER FUNCTIONS You can also delete it in the following way. D Deleting all the phone data 1. Touch "Delete All" of "Phone Book". 1. Touch "Phone Book". 2. Select the desired data. 2. Select the deleting method. "Group Data" ...Deleting all the phone data in group. "All Contact Data" ... - 2010 Toyota Sienna | Navigation Manual - Page 161
OTHER FUNCTIONS 3. When you select "Group Data", the "Select Group" screen is displayed. You can also delete it in the following way. 4. Select the desired group. 1. Touch "Phone Book". 5. Touch "Yes". 2. Touch "Delete All". 3. Touch "Yes". 162 - 2010 Toyota Sienna | Navigation Manual - Page 162
FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" is registered by default. You can change "Group 01" − "Group 19" into desired names. D Selecting a group icon 1. Touch "Icon". 1. Touch "Register" of "Group Name". 2. Select the desired icon - 2010 Toyota Sienna | Navigation Manual - Page 163
a group name, that group will return to the default setting. (excluding "No Group") 1. Touch "Name". 1. Touch "Delete" of "Group Name". 2. Use the software keyboard to input the name. 2. Select the group you want to delete the name of. 3. Touch "Yes". 164 - 2010 Toyota Sienna | Navigation Manual - Page 164
group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. (a) Individually 1. Touch Name". "Delete All" of "Group 1. Touch "Delete" on the "Log Data" screen. 2. Touch "Yes". 2. Touch "Yes". 165 - 2010 Toyota Sienna | Navigation Manual - Page 165
from using some functions of the Hands−free system. It is useful when you leave your car with the hotel or you don't want others to see the data you registered. When you set or unlock the security, you have to input the security code. Be sure to change - 2010 Toyota Sienna | Navigation Manual - Page 166
but also the memory points in the navigation system, etc. will be deleted. (See "D Initializing the security code" on page 169.) 3. Input the current code. Each time you touch A, an inputted digit is deleted. 4. Input a new code. 1. Touch "Phone Book Lock". 5. Touch "Yes". 2. Touch "Change". 167 - 2010 Toyota Sienna | Navigation Manual - Page 167
functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book data. D Display of speed dial screen, Changing the security code. When you set this function, the speed dial screen is not displayed while you are driving. 1. Touch "ON". 2. Input - 2010 Toyota Sienna | Navigation Manual - Page 168
phone In case you register more than one Bluetoothr phone, you need to choose a favorite one. 1. Touch "Default". 1. Touch "Settings" to display "Settings" screen. 2. Input the security code and touch "OK". 2. Touch "Select Telephone" to display "Select Telephone" screen. 3. Touch "Yes". 169 - 2010 Toyota Sienna | Navigation Manual - Page 169
Bluetoothr phone is trying to connect, this screen is displayed. Touch "Yes" or "No". Although you can register up to 6 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 3. Touch "OK". When the result message is displayed, you can use the Bluetoothr phone. 170 - 2010 Toyota Sienna | Navigation Manual - Page 170
...The name of Bluetoothr phone which is displayed on the screen. You can change it into a desired name. "Bluetooth∗ Device Address" ...The address peculiar to the system. You cannot change it. 2. Touch "Change". 3. When you complete the setting, 1. Select the desired phone and touch "Information - 2010 Toyota Sienna | Navigation Manual - Page 171
system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or Passkey and you cannot distinguish one from the other, refer to it. ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 1. Touch "Change". 2. Use the software keyboard to input the - 2010 Toyota Sienna | Navigation Manual - Page 172
Use the software keyboard to input the Device Name. You can input up to 20 characters. 2. Touch "Change" of "Device Name" or "Passkey". ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 4. Input a Passkey with 4 − 8 digits. When you touch A, the inputted number is deleted. 5. When you - 2010 Toyota Sienna | Navigation Manual - Page 173
settings You can initialize the settings. D Deleting a Bluetoothr phone 1. Touch "Default". 1. Touch "Delete" of "Bluetooth∗ Telephone". 2. Touch "Yes". 2. Select the telephone you want to delete and touch "OK". 3. Touch "Yes". ∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc. 174 - 2010 Toyota Sienna | Navigation Manual - Page 174
delete it and you can make sure whether the telephone you delete is correct or not. The speech command system enables you to operate the navigation system and audio/video system by giving a command. 1. Select the telephone you want to display the information about. 1. Push the talk switch. A beep - 2010 Toyota Sienna | Navigation Manual - Page 175
, touch "Help" to display the help screen. (See "Help screen" on page 178.) When you touch "Cancel", the previous screen returns. If the navigation system does not respond or the confirmation screen does not disappear, please push the talk switch and try again. If no command is given, a beep sounds - 2010 Toyota Sienna | Navigation Manual - Page 176
"Enter destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add" or "Replace" is displayed on the screen on the situation.) Touch or say "Cancel", and the system will be canceled. Touch or say "Help", and displays the "Help" screen - 2010 Toyota Sienna | Navigation Manual - Page 177
accents, or speech patterns may be difficult for the system to recognize. D There are some noises such as wind noise, etc. 1. Touch the "Command List" tab or . This system has a function which displays the voice recognition help screen. You can see the command list and operating guide on it. (a) - 2010 Toyota Sienna | Navigation Manual - Page 178
OTHER FUNCTIONS Screen adjustment (b) Operating Guide You can adjust the brightness, contrast color and tone of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness adjustment The brightness and contrast of the screen can be - 2010 Toyota Sienna | Navigation Manual - Page 179
and tone adjustment (with rear seat entertainment system) The color and tone of the screen can be adjusted while a DVD video or video CD is being played. 1. Push the "DISPLAY" button. 2. Touch the desired button to adjust contrast and brightness. "Contrast" "+": Strengthens the contrast of - 2010 Toyota Sienna | Navigation Manual - Page 180
day mode and night mode Depending on the position of the headlight switch, the screen changes to either day mode or night mode. 1. Push the "INFO" button. To the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 181 - 2010 Toyota Sienna | Navigation Manual - Page 181
(a) Automatic transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select a color of touch screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from - 2010 Toyota Sienna | Navigation Manual - Page 182
or "OFF" and then touch "OK". "ON": The rear passengers cannot operate the rear seat entertainment system. Only front passengers can operate the system. "OFF": Both the front and rear passengers can operate the rear seat entertainment system. (d) Delete personal data The following personal data can - 2010 Toyota Sienna | Navigation Manual - Page 183
OTHER FUNCTIONS Beep setting You can turn the beep sound off. 1. Touch "Delete personal data". The "Delete personal data" screen appears. 1. Push the "INFO" button. 2. Touch "Delete". The "Confirmation to delete all personal data" screen appears. 2. Touch "Beep Off". "Beep Off" is highlighted. - 2010 Toyota Sienna | Navigation Manual - Page 184
language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The - 2010 Toyota Sienna | Navigation Manual - Page 185
OTHER FUNCTIONS 186 - 2010 Toyota Sienna | Navigation Manual - Page 186
AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/Video system D Quick reference D Using your audio/video system Some basics ...Radio operation ...CD changer operation ...DVD player operation ...D Audio/video remote controls D Audio/video system operating hints 6 188 189 189 195 206 218 242 243 - 2010 Toyota Sienna | Navigation Manual - Page 187
and 195. "FM" button Push this button to choose an FM station. For details, see pages 191 and 195. 5 6 "DISC·AUX" button Push this button to turn the CD changer, DVD player and AUX on. For details, see pages 191, 195, 208 and 220. "SCAN" button Push this button to scan radio stations or - 2010 Toyota Sienna | Navigation Manual - Page 188
190. This section describes some of the basic features of your audio/video system. Some information may not pertain to your system. Your audio/video system works when the engine switch is in the "ACC" or "ON" position. NOTICE To prevent the battery from being discharged, do not leave the audio - 2010 Toyota Sienna | Navigation Manual - Page 189
SYSTEM (a) Turning the system on and off CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages. - 2010 Toyota Sienna | Navigation Manual - Page 190
AUDIO/VIDEO SYSTEM (b) Switching between functions Push "AM·SAT", "FM" or "DISC·AUX" button to turn on the desired mode. The selected mode turns on immediately. Push these buttons if you want to switch from one mode to another. If the disc is not set, the CD changer or DVD player does not turn on - 2010 Toyota Sienna | Navigation Manual - Page 191
buttons for radio, CD changer and DVD player operation are displayed on the function touch screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted. INFORMATION D If the system does not respond to a touch - 2010 Toyota Sienna | Navigation Manual - Page 192
"+" or "-": Adjusts low−pitched tones. "FRONT" or "REAR": Adjusts sound balance between the front and rear speakers. "L" or "R": Adjusts sound balance heard due to road noise, wind noise or other noises while driving, the system adjusts to the optimum volume according to the noise level. Select "ON - 2010 Toyota Sienna | Navigation Manual - Page 193
AUDIO/VIDEO SYSTEM (e) Selecting screen size (with rear seat entertainment system) The video screen can be changed from normal mode to wide mode. 1. Push the "AUDIO" button. time. D Never try to disassemble or oil any part of the changer. Do not insert anything other than a disc into the slot. 194 - 2010 Toyota Sienna | Navigation Manual - Page 194
(g) Your DVD player (with rear seat entertainment system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button. (h) AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode - 2010 Toyota Sienna | Navigation Manual - Page 195
changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise stations. To change the preset station to a different one, follow the same - 2010 Toyota Sienna | Navigation Manual - Page 196
push the "SCAN" button again. (d) Radio Data System Your audio/video system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text messages search for a stronger signal station. RDS features are available for the use only on FM stations which broadcast RDS information. 197 - 2010 Toyota Sienna | Navigation Manual - Page 197
time you touch "TYPE A" or "TYPE "", the program type changes as in the following: D ROCK D MISC (Miscellaneous) D INFORM (Information) D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D RELIGION D ALARM (Emergency message) "TYPE SEEK" When a program is - 2010 Toyota Sienna | Navigation Manual - Page 198
is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "MSG OFF", the display returns. (e) Traffic announcement "TRAF" A station that regularly broadcasts traffic information is automatically located. When you touch "TRAF", "TRAF SEEK" appears on - 2010 Toyota Sienna | Navigation Manual - Page 199
web at www.xmradio.com or call 1−800−967−2346. Canada- Visit on the web at www.xmradio.ca or call 1−877−438−9677. The XMr Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the - 2010 Toyota Sienna | Navigation Manual - Page 200
AUDIO/VIDEO SYSTEM D Listening to satellite radio D Channel category Touch either "TYPEA" or "TYPE"" to go to the next or previous category. Push the "AM·SAT" button to - 2010 Toyota Sienna | Navigation Manual - Page 201
AUDIO/VIDEO SYSTEM D Presetting a channel 1. Tune in the desired channel. D Selecting a channel touch screen button. Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power - 2010 Toyota Sienna | Navigation Manual - Page 202
AUDIO/VIDEO SYSTEM D Displaying the title and name To scan the currently selected " button a second time. When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed - 2010 Toyota Sienna | Navigation Manual - Page 203
/feature associated with the channel at that time. No action needed. The channel you selected is no longer available change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or ANTENNA UPDATING NO SIGNAL LOADING OFF AIR Contact the XMr Listener 1−877−438−9677 (Canada - 2010 Toyota Sienna | Navigation Manual - Page 204
. - Consult the dealer or an experienced radio/TV technician for help. Information to user Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk - 2010 Toyota Sienna | Navigation Manual - Page 205
AUDIO/VIDEO SYSTEM - CD changer operation (a) Inserting discs The engine switch must be in the "ACC" or "ON" is loaded, the amber indicators at either side of the slot start blinking again. When the indicators change to green, you can insert the next disc. 4. Push the "LOAD· " button to close - 2010 Toyota Sienna | Navigation Manual - Page 206
AUDIO/VIDEO SYSTEM If the label faces down, the disc cannot be in the vehicle during sudden braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display closed. , the amber indicators change to green. A disc can be inserted. 207 - 2010 Toyota Sienna | Navigation Manual - Page 207
any empty disc trays. Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC·AUX" button again to switch to the CD changer. If the rear seat entertainment system is on, pushing the "DISC·AUX" button switches the sound of the front audio/video system and that of the - 2010 Toyota Sienna | Navigation Manual - Page 208
AUDIO/VIDEO SYSTEM (d) Selecting a desired disc Touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. (e) Playing an audio disc Push the "AUDIO" button to display this screen. 209 - 2010 Toyota Sienna | Navigation Manual - Page 209
The desired track can be selected from a list. This function is available only when the vehicle is not moving. Touch "TRACK LIST". The page is displayed. Vehicles with rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the - 2010 Toyota Sienna | Navigation Manual - Page 210
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED TRACK OR DISC Searching for a desired track - Touch "SCAN" on the screen or push the "SCAN" button briefly while the disc is - 2010 Toyota Sienna | Navigation Manual - Page 211
briefly while the disc is playing. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To cancel a second while the disc is playing. "D·RAND" appears on the screen. The system selects a track on all the audio discs in the changer in random order. - 2010 Toyota Sienna | Navigation Manual - Page 212
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER "FOLDERY": Touch this touch screen button to go to the next folder. "FOLDERB": Touch this touch screen button to go to the previous folder. "FOLDER LIST": The desired folder can be selected in a list. This function is available only when the vehicle is - 2010 Toyota Sienna | Navigation Manual - Page 213
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side up or down. "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. 214 - 2010 Toyota Sienna | Navigation Manual - Page 214
AUDIO/VIDEO SYSTEM Touch the desired file number. The changer will start playing the The folder list is displayed. "DETAIL": Details of the file currently playing is displayed. This function is available only when the vehicle is not moving. SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen or - 2010 Toyota Sienna | Navigation Manual - Page 215
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED FOLDER Touch "SCAN" on the screen or push the "SCAN" button for longer than a second while the disc is playing. "FLD.SCAN" - 2010 Toyota Sienna | Navigation Manual - Page 216
" once again. When a file is skipped or the system is inoperative, touch "RAND" to reset. (g) If the player malfunctions If "CD ERROR" appears on the screen, audio signals of the disc cannot be read or the system has trouble. Push the "DISC·AUX" button once again. If the changer does not operate - 2010 Toyota Sienna | Navigation Manual - Page 217
CD text, dts−CD or MP3 disc only when a disc is loaded in the DVD player. A WMA disc cannot be played. Refer to "Rear seat entertainment system" for details. For appropriate discs for this player, see "Audio/video system operating hints" on page 243. (a) Inserting the disc Insert the disc into the - 2010 Toyota Sienna | Navigation Manual - Page 218
AUDIO/VIDEO SYSTEM NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. (b) Ejecting a disc Push the button. 219 - 2010 Toyota Sienna | Navigation Manual - Page 219
AUDIO/VIDEO SYSTEM (c) Playing a disc Push the "DISC·AUX" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating an audio CD PLAYING AN AUDIO CD CD text only - The disc - 2010 Toyota Sienna | Navigation Manual - Page 220
AUDIO/VIDEO SYSTEM Touch the desired track number. The player will start playing the selected track from the the button, the player will start playing the selected track from the beginning. "TRACK LIST": The desired track can be selected from a list. This function is available only when the vehicle - 2010 Toyota Sienna | Navigation Manual - Page 221
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED TRACK Touch "SCAN" on the screen or push the "SCAN" button. "SCAN" will be highlighted on the screen. The player will play the next track for 10 seconds, then scan again. To select a track, touch "SCAN" on the screen or push the "SCAN" button a second - 2010 Toyota Sienna | Navigation Manual - Page 222
SYSTEM (e) Operating a MP3 DISC PLAYING A MP3 DISC Push the "AUDIO" button to display this screen. SELECTING A DESIRED FOLDER Touch the desired folder number. The player of the file currently playing is displayed. This function is available only when the vehicle is not moving. "FOLDERY": Touch - 2010 Toyota Sienna | Navigation Manual - Page 223
AUDIO/VIDEO SYSTEM Touch the desired file number. The player will start playing the selected file reverse the disc. When you release the button, the player will resume playing. "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch " - 2010 Toyota Sienna | Navigation Manual - Page 224
VIDEO SYSTEM SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen or push the "SCAN" button briefly. "SCAN" appears on the screen. The DVD player button until the beep sounds. "FLD.SCAN" appears on the screen. The DVD player will play the file at the beginning of each folder for 10 seconds, then - 2010 Toyota Sienna | Navigation Manual - Page 225
SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - Touch "RPT" briefly while the file is playing. "RPT" appears on the screen. When the file is finished, the player is finished, the player will automatically go back - 2010 Toyota Sienna | Navigation Manual - Page 226
SYSTEM (f) Operating a DVD video disc NOTE: The playback condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD - 2010 Toyota Sienna | Navigation Manual - Page 227
the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If you touch a part of the screen, where controls are not located while watching video, DVD controls will appear. "Page2 - 2010 Toyota Sienna | Navigation Manual - Page 228
AUDIO/VIDEO SYSTEM DESCRIPTION OF DVD CONTROLS D Top page of DVD video controls "Menu" and "Top Menu": If you touch any of the above controls, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control key - 2010 Toyota Sienna | Navigation Manual - Page 229
AUDIO/VIDEO SYSTEM SELECTING A MENU ITEM Enter the menu item using Y, ", B and A and touch "Enter". The player starts playing video for that menu item. (For details, see the manual that comes with the DVD video disc provided separately.) Each time you touch "Move Buttons", the controls on the - 2010 Toyota Sienna | Navigation Manual - Page 230
AUDIO/VIDEO SYSTEM CHANGING THE SUBTITLE LANGUAGE Each time you touch "Subtitle", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous CHANGING THE AUDIO LANGUAGE Each time you touch "AUDIO", the language is selected from the ones - 2010 Toyota Sienna | Navigation Manual - Page 231
AUDIO/VIDEO SYSTEM CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the angle mark appears on the screen. Each time you touch "Angle", the angle changes. When you touch screen returns. , and the previous SETUP MENU There are initial setting touch screen - 2010 Toyota Sienna | Navigation Manual - Page 232
AUDIO/VIDEO SYSTEM D Subtitle language You can change the subtitle language. 1. Touch "Subtitle Language". 2. "Setup Menu" screen. D DVD language You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. Touch the language you want to read on the "DVD Language" screen. If you - 2010 Toyota Sienna | Navigation Manual - Page 233
AUDIO/VIDEO SYSTEM ENTER AUDIO LANGUAGE CODE 0113 0118 0119 0125 0126 0201 0205 If you touch "Others" on the "Select Audio Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the language you want to hear or read by entering a language code. 1. Enter the 4− - 2010 Toyota Sienna | Navigation Manual - Page 234
AUDIO/VIDEO SYSTEM 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 1121 1125 1201 1214 1215 1220 - 2010 Toyota Sienna | Navigation Manual - Page 235
to cancel the setup operation from the rear seat, touch "Play". The player will resume normal play. Under the same condition, the rear passenger can cancel the setup operation from the front seat. To lock the operation of the player from the rear seat, see "(c) Rear system lock" on page 183. 236 - 2010 Toyota Sienna | Navigation Manual - Page 236
you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING VIDEO CD CONTROLS If you touch the part where controls are not located while you are watching video on the video CD - 2010 Toyota Sienna | Navigation Manual - Page 237
AUDIO/VIDEO SYSTEM DESCRIPTION OF VIDEO CD CONTROLS D Controls on top page "Select Number": display. If you touch this while the player is playing video, the next track is searched and played. "Main/Sub": A multiplex transmission changing control. The mode changes from Main/Sub to Main, to Sub and - 2010 Toyota Sienna | Navigation Manual - Page 238
properly. If "DVD ERROR" appears on the display: It indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove the disc from the player and allow the player to cool down. If the malfunction is not rectified: Take your vehicle to your dealer. If an - 2010 Toyota Sienna | Navigation Manual - Page 239
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating a country where - 2010 Toyota Sienna | Navigation Manual - Page 240
can enjoy the same scene at different angles. Multi−language feature: You can select a language of the subtitle and audio. Region codes: The region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you cannot play the disc on - 2010 Toyota Sienna | Navigation Manual - Page 241
with rear seat entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing the " " or " " switch. Some parts of the audio/video system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls, and features - 2010 Toyota Sienna | Navigation Manual - Page 242
Each time you push the "MODE" switch, the system changes the audio mode. The DVD player will be selectable if a rear seat entertainment system is installed in your vehicle. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch - 2010 Toyota Sienna | Navigation Manual - Page 243
use the air conditioning to cool the vehicle interior before you use the changer and player. D Bumpy roads or other vibrations may make your CD changer and DVD player skip. D If moisture gets into your CD changer and DVD player, you may not play even though they appear to be working. Remove the disc - 2010 Toyota Sienna | Navigation Manual - Page 244
AUDIO/VIDEO SYSTEM Audio CDs Audio CDs CD changer D Use only discs marked as shown above. The following products may not be playable on your changer. Copy−protected CDs CD−Rs (CD−Recordable) CD−RWs (CD−Re−writable) CD−ROMs DVD video discs Video CDs DVD player D Use only discs marked as shown - 2010 Toyota Sienna | Navigation Manual - Page 245
quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to - 2010 Toyota Sienna | Navigation Manual - Page 246
skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat, and direct sunlight. To clean a compact disc: Wipe it - 2010 Toyota Sienna | Navigation Manual - Page 247
as MP3 or WMA files. To prevent noise and playback errors, use the appropriate file extensions. D The player can play only the first session using multi . D The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. (The system can play MP3 files with sampling - 2010 Toyota Sienna | Navigation Manual - Page 248
AUDIO/VIDEO SYSTEM 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.wma 005.mp3 Folder 3 The unit may be unable to play some damaged discs. D If you insert a CD−RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot - 2010 Toyota Sienna | Navigation Manual - Page 249
AUDIO/VIDEO SYSTEM TERMS Packet write- This is a general term that describes the process of (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio) is an audio compression format developed - 2010 Toyota Sienna | Navigation Manual - Page 250
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system D Rear view monitor system 7 252 251 - 2010 Toyota Sienna | Navigation Manual - Page 251
as that of the rear view mirror. To display the rear view image on the screen, place the shift lever in the "R" position when the engine switch is in the system when the back door is not completely closed. If the back of the vehicle is hit, the position and mounting angle of the camera may change. - 2010 Toyota Sienna | Navigation Manual - Page 252
D Area displayed on screen Image is displayed approximately level on screen. NOTICE When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. " Corners of bumper The area detected by the camera is limited. The camera does not - 2010 Toyota Sienna | Navigation Manual - Page 253
vary according to vehicle orientation or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera uses a special lens. The distance of the image that appears on the screen differs from the actual distance. In the following cases, it - 2010 Toyota Sienna | Navigation Manual - Page 254
REAR VIEW MONITOR SYSTEM If a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera, the smear effect∗ peculiar to the camera may occur. ∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is - 2010 Toyota Sienna | Navigation Manual - Page 255
REAR VIEW MONITOR SYSTEM 256 - 2010 Toyota Sienna | Navigation Manual - Page 256
APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 8 258 260 257 - 2010 Toyota Sienna | Navigation Manual - Page 257
tall buildings, trucks, or even the placement of objects on the instrument panel may obstruct the GPS signals. The GPS satellites may not send signals to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown - 2010 Toyota Sienna | Navigation Manual - Page 258
not be available for the next turn to the right or left. D It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown or announced. D A location may - 2010 Toyota Sienna | Navigation Manual - Page 259
described in the "D Current position/tire change calibration". (See page 117.) This navigation system uses tire turning data and is designed so please make sure the tire pressure of all four tires is correct. This system uses the maps of DENSO. © 2008 DENSO CORPORATION © 2007 NAVTEQ. All rights - 2010 Toyota Sienna | Navigation Manual - Page 260
LOCATION CODES AND RELATED PRODUCTS (COLLECTIVELY, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM obscure or remove any copyright data from or publish any part of the DATABASE without the disassemble, decompile, or reverse engineer any portion of the DATABASE. - 2010 Toyota Sienna | Navigation Manual - Page 261
A WARRANTY, AND YOU ARE NOT ENTITLED TO RELY ON ANY SUCH ADVICE OR INFORMATION. THIS DISCLAIMER OF WARRANTIES IS information due to the passage of time, changing circumstances, and due to the nature of the ; road slope or grade; bridge height, weight or other limits; road or traffic conditions; - 2010 Toyota Sienna | Navigation Manual - Page 262
other entity of the United States Government, or funded in whole or in part by the United States Government, then use, duplication, reproduction, release, modification, disclosure or transfer of this commercial product and accompanying documentation, is restricted in accordance with the LIMITED or - 2010 Toyota Sienna | Navigation Manual - Page 263
navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service bureau, remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer - 2010 Toyota Sienna | Navigation Manual - Page 264
you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. No Warranty. This Data - 2010 Toyota Sienna | Navigation Manual - Page 265
from anywhere any part of the Data ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit customarily claimed by the United States government, this Data is a "commercial item" as that term is defined at 48 C.F.R. ("FAR") - 2010 Toyota Sienna | Navigation Manual - Page 266
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part , or reverse engineer any portion of the commercial purposes, and not for service bureau, time−sharing or other similar purposes. You may not modify the information or remove representations or warranties of any kind - 2010 Toyota Sienna | Navigation Manual - Page 267
OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS product to indicate business locations are the marks of available for route guidance. In one type of area, primarily around metropolitan centers, detailed route guidance is available facilities, and their locations are often changed. In some places - 2010 Toyota Sienna | Navigation Manual - Page 268
APPENDIX - Changing the map DVD−ROM 4. Push the "LOAD· " button to close the display. The map database is normally updated once a year. Contact your dealer for information about the availability and pricing of an update. CAUTION D Do not place anything on the opened display, as such items may be - 2010 Toyota Sienna | Navigation Manual - Page 269
and disc coverage area 1. Push the "MENU" button. 2. Touch "Map DVD". Make sure the version of the database on this screen. To display the disc coverage area, touch "Covered Area". Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released - 2010 Toyota Sienna | Navigation Manual - Page 270
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection - 2010 Toyota Sienna | Navigation Manual - Page 271
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 258 through 260. 2 - 2010 Toyota Sienna | Navigation Manual - Page 272
the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons - 2010 Toyota Sienna | Navigation Manual - Page 273
the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver's personal judgement. Use this system only in locations where it is legal to do so. Some - 2010 Toyota Sienna | Navigation Manual - Page 274
Quick guide - - Overview buttons and guidance screen 0U5116X No. 1 2 3 4 Name North−up or heading−up symbol Scale indicator "INFO" button Zoom out touch screen button "Mark" "Route" Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2010 Toyota Sienna | Navigation Manual - Page 275
this button to display the "Destination" screen. Touch this touch screen button to change the screen mode. Push this button to display the "Menu" screen. Page 7 the destination. "GPS" mark (Global Positioning System) Speech command system indicator Whenever your vehicle is receiving signals from - 2010 Toyota Sienna | Navigation Manual - Page 276
- Registering home 1 Push the "MENU" button. 1U5067X 2 Touch "My Places". 0U5002F 3 Touch "Register" of the home. 0U5003F 4 There are 12 different methods to search your home. 0U5004F See "Destination search" on page 43. 7 - 2010 Toyota Sienna | Navigation Manual - Page 277
5 Touch "Enter". The "Memory Point" screen is displayed. 0U5005F 6 Touch "OK". 0U5006F Registration of home is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) 8 - 2010 Toyota Sienna | Navigation Manual - Page 278
- Registering preset memory points (Quick access) 1 Push the "MENU" button. 1U5067X 2 Touch "My Places". 0U5007F 3 Touch "Register" of the memory points. 0U5008F 4 There are 13 different methods to search preset memory points. 0U5009F See "Destination search" on page 43. 9 - 2010 Toyota Sienna | Navigation Manual - Page 279
7 Touch one of preset buttons 1 to 5. 0U5012F 8 Touch "OK". 0U5013F Registration of preset memory points is complete. You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) The registered points can be used on the "Destination - 2010 Toyota Sienna | Navigation Manual - Page 280
"DEST" button. 1U5066X 2 There are 13 different methods to search destinations. 0U5014F See "Destination search" on page 43. 3 Touch "Enter". The navigation system performs a search for the route. 0U5015F 4 Touch "Guide", and start driving. 0U5016F Routes other than the one recommended - 2010 Toyota Sienna | Navigation Manual - Page 281
registered. (To register "Home", see " - Registering home" on page 102.) 3 Touch "Enter". 0U5018F The navigation system performs a search for the route. 4 Touch "Guide", and start driving. 0U5019F Routes other than the one recommended can also be selected. (See "Starting route guidance" on