2010 Toyota Tundra Double Cab Navigation Manual - Page 265

09 01.26 SETUP TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function will adjust the miscalculation caused by the circumference difference between the old and new tires. If this procedure is not performed when the tires are replaced, the current vehicle position mark may be incorrectly displayed. D Pop−up information When the "Pop−up information" is turned on, the pop−up information will be displayed. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to display page 2 of the "Detailed Navi. Settings" screen. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map will be displayed. 4. Touch "Pop−up Information". 5. Touch "On" or "Off". 6. Touch "Save". 253 2010 TUNDRA Navigation from April.09 Prod.(OM34481U)