2010 Toyota Tundra Regular Cab Owners Manual - Page 1358

5-2. Steps to take in an emergency Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing the tire Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle. Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Replacing a steel wheel with a steel wheel Tapered portion Tighten the nuts until the tapered portion comes into loose contact with the bolt seat in the disc wheel. Disc wheel 618