2010 Toyota Yaris Owners Manual - Page 653

4-3. Do-it-yourself maintenance n Engine oil consumption l The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. l More oil is consumed under driving conditions such as high speeds and frequent acceleration and deceleration. l A new engine consumes more oil. l When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately. l Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per 1000 km) l If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles (1000 km), contact your Toyota dealer. n After changing the engine oil (except Canada) The oil change system should be reset. Perform the following procedures: Turn the engine switch off with the Trip A reading shown.(→P. 121) Turn the engine switch to the ON position while holding down the ODO/TRIP button. Continue to press and hold the button until the trip meter displays 000000. If the system fails to reset, the light will continue flashing. 4 Maintenance and care 237