2011 Toyota Land Cruiser Navigation Manual - Page 256

AIR CONDITIONING To remove frost or exterior fog on the windshield - 1. Push the upper side of the temperature control button until maximum figure appears on the temperature display. 2. Push the windshield air flow button. 3. Touch "HI" of the air flow control to obtain a maximum air flow. 4. Leave the air conditioning on−off control off. When the windshield air flow button is pushed while operating in automatic mode, the air conditioning is set to operate and the OUTSIDE AIR mode is set. Touch "A/C" for dehumidified heating or cooling. This setting clears the front view more quickly. If you push the windshield air flow button once again while in the FRONT WINDSHIELD mode, the mode then returns to the last mode used. (d) Micro dust and pollen filter CAUTION To prevent the windshield from fogging up, do not use the windshield air flow button during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. Push the micro dust and pollen filter button. Outside air mode switches to recirculated air mode. Pollen is removed from air and the air flows to the upper part of the body. Usually the system will turn off automatically approximately 3 minutes later. To stop the operation, press the button again. 258