2011 Toyota Prius Owners Manual - Page 194

2-1. Driving procedures n When leaving the vehicle If the indicator on the "POWER" switch is not off, the "POWER" switch is still not in OFF mode. Turn the "POWER" switch to OFF before you leave the vehicle. n Auto "P" position function l If the "POWER" switch is pressed while the hybrid system is operating and the vehicle is at a complete stop, the "POWER" switch will be turned to OFF, then the shift position will be automatically switched to "P". When turning the "POWER" switch to OFF while the shift position is not set to "P", operate the "POWER" switch while pushing down fully on the brake pedal. Then, release the brake pedal after confirming that the shift position indicator on the instrument cluster is set in "P". l If the auto "P" position function is malfunctioning, it may not be possible to turn the "POWER" switch to OFF. In this event, the "POWER" switch can be turned to OFF after applying the parking brake. Have the vehicle inspected by your Toyota dealer immediately. n When the ambient temperature is low, such as during winter driving conditions It may take time until the "READY" indicator comes on. n When the P position control system malfunctions The "POWER" switch will not be able to be turned off. In such a case, the switch can be turned off after applying the parking brake. Have the vehicle inspected by your Toyota dealer immediately. n Sounds and vibrations specific to a hybrid vehicle →P. 31 n When the hybrid system is malfunctioning →P. 507 n Electronic key battery depletion →P. 64 n When the electronic key battery is discharged →P. 469 n Conditions affecting operation →P. 65 168 PRIUS_U (OM47685U) DVD