2011 Toyota RAV4 Navigation Manual
2011 Toyota RAV4 Manual
2011 Toyota RAV4 manual content summary:
- 2011 Toyota RAV4 | Navigation Manual - Page 1
CUSTOMER EXPERIENCE CENTER 1-800-331-4331 RAV4 2 0 1 1 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 8/10 10-TCS-04053 00505-NAV11-RAV4 - 2011 Toyota RAV4 | Navigation Manual - Page 2
Touch to overlay traffic event and flow indicators on the map. Traffic flow is displayed by colored lines right along the side of the freeways: Free flow traffic Moderate traffic Heavy congestion 2 Auto Avoid Traffic: Touch to have the system automatically select another route when moderate or heavy traf - 2011 Toyota RAV4 | Navigation Manual - Page 3
or turn off the screen. Change the angle of the screen for best viewing. AUDIO Button Set the radio station presets, adjust the balance and tone controls. È MENU Button Access Voice Guidance Volume, Select User, My Places, Setup and Suspend Guidance. DESTINATION Button Input the destination by one - 2011 Toyota RAV4 | Navigation Manual - Page 4
and move to step 2. step 3 Input the house number and touch . step 4 Input the street name. Touch to show all matching streets. Quick Tip - Enter the street name without prefixes such as North or the letter N. The system will display all of the options available. step 5 Use or to scroll up - 2011 Toyota RAV4 | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Use or to scroll up or down. Touch the desired city. Select the desired street. step 8 Select the desired Route Preference by touching . step 9 Select the desired Route Preference(s) for the trip. When the yellow bar appears, the route preference has - 2011 Toyota RAV4 | Navigation Manual - Page 6
- POINTS OF INTEREST (POI) POINTS OF INTEREST BY NAME step 1 Press the DEST followed by . panel button step 2 Touch . step 3 Input the POI name and touch . step 4 or to scroll up Use or down. Touch the desired destination. Quick Tip - If the POI isn't listed in - 2011 Toyota RAV4 | Navigation Manual - Page 7
DESTINATION INPUT - POINTS OF INTEREST (POI) POINTS OF INTEREST BY CATEGORY step 1 Press the DEST followed by . panel button step 2 Touch . step 3 Touch . step 4 Touch the desired - 2011 Toyota RAV4 | Navigation Manual - Page 8
area code and telephone number followed by . It is not necessary to dial "1." Quick Tip - Personal telephone numbers cannot be used for Destination input unless previously added in the Address Book. step 3 Select the business or registered address from the screen. step 4 See page 10 to select - 2011 Toyota RAV4 | Navigation Manual - Page 9
house number and . touch Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Input the street name. Touch to show all matching streets. step 6 Use or to scroll up or down. Touch the desired street and go to step 9. - 2011 Toyota RAV4 | Navigation Manual - Page 10
the city name or select from a previously selected city. If the city is not available try the next largest city in the vicinity. step 8 Touch the desired city. . step 10 Touch at the top left of the screen to change the home icon. step 11 Touch the desired icon for your home. step 12 Touch - 2011 Toyota RAV4 | Navigation Manual - Page 11
inputting the desired address select the appropriate Region by pressing . If the incorrect Region is chosen, the system will either find an address that closely matches in that area or will indicate Short is the most direct route based upon driven mileage. The system does not account for traffic - 2011 Toyota RAV4 | Navigation Manual - Page 12
screen. When the yellow bar appears this feature has been disabled. SCREEN TRANSITION PRESS MENU > SETUP Set the layout of system from reverting to the map display. Once the screen transition is switched off, the audio available while in Route Guidance and traveling on a freeway or Toll Road. - 2011 Toyota RAV4 | Navigation Manual - Page 13
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME - 2011 Toyota RAV4 | Navigation Manual - Page 14
system to display traffic information. Traffic events and flow data are updated every 2 minutes from a variety of sources. XM NavTraffic® service is available in 100 major metropolitan areas across the US and Canada with more to come. New RAV4 enable XM NavTraffic®. See your Toyota dealer for details. 13 - 2011 Toyota RAV4 | Navigation Manual - Page 15
BASIC FUNCTIONS SECTION BASIC FUNCTIONS Basic information before operation D Display operation D Initial screen D Touch screen operation D Inputting letters and numbers/List screen operation D Function help D Map screen operation Current position display ...Screen scroll operation ...Switching the - 2011 Toyota RAV4 | Navigation Manual - Page 16
START STOP" switch is set at OFF, the display will automatically move back to position 0 . The display will automatically resume the previous position when the engine switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system- If the engine switch is set at OFF, the display will - 2011 Toyota RAV4 | Navigation Manual - Page 17
the display while it is moving. NOTICE Do not place any foreign objects on the display while it is moving. It could damage your navigation system. Vehicles with smart key system - When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the - 2011 Toyota RAV4 | Navigation Manual - Page 18
system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date are touched, the screen will change back to "CAUTION" screen and then change to the map screen in about - 2011 Toyota RAV4 | Navigation Manual - Page 19
date, the memo information will be displayed when the navigation system is in operation. The memo information screen will be displayed every time the system is turned on. This system is operated mainly by the touch screen buttons on the screen. To prevent damage to the screen, lightly data input by - 2011 Toyota RAV4 | Navigation Manual - Page 20
an address or a name, or entering a memo, letters and numbers can be input via the touch screen. D To input letters To display the alphabet keys, touch "A−Z" or " ". INFORMATION Keyboard layout can be changed. (See page 112.) Enter letters by touching the alphabet keys directly. Touching this - 2011 Toyota RAV4 | Navigation Manual - Page 21
BASIC FUNCTIONS D To input numbers and symbols To display the number keys and symbol keys, touch "0−9". D To display the list Enter numbers and symbols by items is shown to the right side of the screen. If the number of matching items is more than 9999, the system displays on the screen. 27 - 2011 Toyota RAV4 | Navigation Manual - Page 22
time. This expresses a displayed screen position. 1. Touch "Sort by". If appears to the right of the item name, the complete name is too long ": To sort in the order of distance from your current location. "Date": To sort in the order of the date. "Category": To sort in the order of the category. - 2011 Toyota RAV4 | Navigation Manual - Page 23
BASIC FUNCTIONS Function help TYPE B Explanations for the functions of the "Destination", "Setup", "Menu" and "XM NavTraffic" screens can be viewed. "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is - 2011 Toyota RAV4 | Navigation Manual - Page 24
of the screen and the map moves as the vehicle proceeds along the designated route. INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct - 2011 Toyota RAV4 | Navigation Manual - Page 25
access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See one. Touch "Mark". When you touch "Mark", the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by - 2011 Toyota RAV4 | Navigation Manual - Page 26
BASIC FUNCTIONS To change the icon or name, etc., see " - Editing memory points" on page 98. Up to 106 memory points can be registered. If there is an attempt to register more than 106, a message appears for confirmation. D To see information about the icon where the cursor is set To display - 2011 Toyota RAV4 | Navigation Manual - Page 27
BASIC FUNCTIONS POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed on the top of the screen. MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and "Info." are displayed on the top of the screen. Touch "Info.". Touch "Info.". - 2011 Toyota RAV4 | Navigation Manual - Page 28
BASIC FUNCTIONS - Switching the screens DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. Any one of the screen configurations can be selected . 1. Touch this button to display the following screen. Touch "Info.". - 2011 Toyota RAV4 | Navigation Manual - Page 29
BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 35.) : To display the dual map screen. (See page 36.) : To display the compass mode screen. (See page 36.) : To display the turn list screen. (See page - 2011 Toyota RAV4 | Navigation Manual - Page 30
map screen. COMPASS MODE Current vehicle position is indicated with a compass, not with a map. in the direction of the destination. When driving refer to the longitude and latitude coordinates, Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 120.) 4. Changing - 2011 Toyota RAV4 | Navigation Manual - Page 31
m). Touch or to change the scale of the map display. The scale bar and indicator at the bottom of the screen indicates the map scale menu. current position is moved to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print - 2011 Toyota RAV4 | Navigation Manual - Page 32
FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 1. Touch "Info." while the foot print map is displayed. If the map is displayed by a split screen, the map will change into a single map display. Details of - 2011 Toyota RAV4 | Navigation Manual - Page 33
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. Touch North is always up. Heading−up symbol The direction of vehicle travel is always up. A red arrow indicates North. 39 - 2011 Toyota RAV4 | Navigation Manual - Page 34
BASIC FUNCTIONS 40 - 2011 Toyota RAV4 | Navigation Manual - Page 35
DESTINATION SEARCH SECTION DESTINATION SEARCH D Quick reference ("Destination" screen) D Destination search Selecting the region to search ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI*" ...Destination search by - 2011 Toyota RAV4 | Navigation Manual - Page 36
be input by using the input keys...47 2 "POI" Select one of the many POIs (Points of Interest) that have already been stored in the system's service points that are already stored in the system's database can be selected...59 7 "Map" A destination can be selected simply by touching the location - 2011 Toyota RAV4 | Navigation Manual - Page 37
" To change the selected region to search, touch this button...44 13 Quick access touch screen buttons One of 5 preset memory points can be selected by touching the screen directly. If a quick access point has not been registered, a message will be displayed and will automatically switch to the - 2011 Toyota RAV4 | Navigation Manual - Page 38
search SELECTING THE REGION TO SEARCH ON THE DESTINATION SCREEN 1. Push the "DEST" button. SELECTING THE REGION TO SEARCH ON THE INPUT SCREEN Change the selected region in order to set a destination from a different region by using "Address", "POI", "Freeway Ent./Exit" or "Intersection". 2. Touch - 2011 Toyota RAV4 | Navigation Manual - Page 39
DESTINATION SEARCH U.S.A. Button "US1" "US2" States included in the search region Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan Ohio - 2011 Toyota RAV4 | Navigation Manual - Page 40
screen button on the "Destination" screen. The screen changes and displays the map location for home and the route preference. (See "Starting route guidance" on page 65.) If home has not been registered, a message will be displayed and will automatically switch to the setting screen. To use this - 2011 Toyota RAV4 | Navigation Manual - Page 41
numbers directly on the screen to input a house number. After inputting a house number, touch "OK" to display the screen for inputting a street name. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2. Input the street name and touch - 2011 Toyota RAV4 | Navigation Manual - Page 42
found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference screen changes to the city list screen. If inputting a street name first, the screen changes. The house number can then be input. If the above screen appears, - 2011 Toyota RAV4 | Navigation Manual - Page 43
a city name. To search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 3. Touch the - 2011 Toyota RAV4 | Navigation Manual - Page 44
FROM THE LAST 5 CITIES 2. Touch the button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 47.) Touch the button of the desired city name. If the - 2011 Toyota RAV4 | Navigation Manual - Page 45
the desired method. 2. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) When inputting the name of a specific Point of Interest, and there are two or more - 2011 Toyota RAV4 | Navigation Manual - Page 46
POI icons" on page 82.) To search by city, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 52 - 2011 Toyota RAV4 | Navigation Manual - Page 47
DESTINATION SEARCH INPUTTING THE CITY NAME 1. Touch "Input City Name". SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". 2. Input the city name. 2. Touch the button of the desired city name. 3. Touch the button of the desired city name from the displayed list. 53 - 2011 Toyota RAV4 | Navigation Manual - Page 48
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES D Selecting from the categories Touch the button of the desired city name. If the navigation has never been used, no cities will be displayed on the screen. Touch "Category". If the desired POI category is on the screen, touch the name to - 2011 Toyota RAV4 | Navigation Manual - Page 49
the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set the search point via the map screen 4. Set the search point from any destination It is possible to display the names of POIs located within approximately 20 miles (32 km) from - 2011 Toyota RAV4 | Navigation Manual - Page 50
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". When an arrow facing the desired point is - 2011 Toyota RAV4 | Navigation Manual - Page 51
. "List": If the desired POI categories have already been selected, a list of POI will be displayed from among the selected categories. The selected category icon appears on the top left of the screen. If the desired POI category is not on the screen, touch "List All Categories" to list all POI - 2011 Toyota RAV4 | Navigation Manual - Page 52
screen. "Show List": To display the list of POIs in the selected categories. 3. Input a telephone number. 4. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page - 2011 Toyota RAV4 | Navigation Manual - Page 53
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2011 Toyota RAV4 | Navigation Manual - Page 54
and up to 100 previously set destinations are displayed on the screen. 3. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 65.) 2. To delete the point, touch - 2011 Toyota RAV4 | Navigation Manual - Page 55
Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 4. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See - 2011 Toyota RAV4 | Navigation Manual - Page 56
the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the Freeways and interstates use an "I" (I−405). US highways use the state designation before the number (CA−118). 3. Select the desired freeway by touching - 2011 Toyota RAV4 | Navigation Manual - Page 57
list is displayed by touching this button and inputting the name. 3. Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference - 2011 Toyota RAV4 | Navigation Manual - Page 58
destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. . "Delete All": To delete all destinations on the list. A message appears to confirm the request to delete. 4. To delete the destination(s), touch - 2011 Toyota RAV4 | Navigation Manual - Page 59
Starting route guidance After inputting the destination, the screen changes and displays the map location of the selected destination 3. To start guidance, touch "Guide". "3 Routes": To select the desired route from three possible routes. (See page 67.) "Route": To change the route. (See pages 76 - 2011 Toyota RAV4 | Navigation Manual - Page 60
traffic congestion. D Route guidance may not be available if there is no road data for the specified location. D When setting the destination on a map with a scale larger than 0.5 miles (800 m), the map scale changes to 0.5 miles (800 m) automatically. Set the destination again. D If a destination - 2011 Toyota RAV4 | Navigation Manual - Page 61
Upon reception of GPS signals, it is automatically corrected. 1. To select the desired route from three routes, touch "3 Routes". 2. Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended route. This route is indicated by an orange line. "Quick2": Alternative route - 2011 Toyota RAV4 | Navigation Manual - Page 62
DESTINATION SEARCH 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 68 - 2011 Toyota RAV4 | Navigation Manual - Page 63
ROUTE GUIDANCE SECTION ROUTE GUIDANCE D Route guidance screen D Typical voice guidance prompts D Distance and time to destination D Setting and deleting destination Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route Search condition ...Detour setting ...Route - 2011 Toyota RAV4 | Navigation Manual - Page 64
During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the next junction and exit, or POIs in the vicinity of the freeway exit. 1 2 3 4 5 Distance to the next turn and the arrow indicating turning direction Current street name Distance - 2011 Toyota RAV4 | Navigation Manual - Page 65
name 2 Distance from the current position to the exit or junction 3 Current position "OFF": The guidance screen on freeway disappears and the map screen appears. 1 Next street name Distance to the intersection 3 Current position "OFF": The intersection guidance screen disappears and the map screen - 2011 Toyota RAV4 | Navigation Manual - Page 66
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays - 2011 Toyota RAV4 | Navigation Manual - Page 67
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 1 "Proceed about 4 miles to the traffic circle." "In a quarter of a mile - 2011 Toyota RAV4 | Navigation Manual - Page 68
One −way road One −way road ∗: The system indicates a U−turn if the distance between two one−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. The system announces the approach to the final destination. 1 2 "Your - 2011 Toyota RAV4 | Navigation Manual - Page 69
time. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time is calculated based - 2011 Toyota RAV4 | Navigation Manual - Page 70
routes can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 1. Touch "Route". 1. Touch "Route". 2. Touch "Add". 3. Input an additional destination in the same way as the destination search. (See "Destination search" on - 2011 Toyota RAV4 | Navigation Manual - Page 71
touch "OK". The system searches for the guidance route again, and displays the entire route. Even if "OK" is not touched, the entire route is displayed automatically within a few seconds . "Delete All": To delete all destinations on the list. A message appears to confirm the request to delete. 77 - 2011 Toyota RAV4 | Navigation Manual - Page 72
will return. 5. If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate the route conditions of the route to the destination. 1. Touch "Route". 2. Touch "Search Condition - 2011 Toyota RAV4 | Navigation Manual - Page 73
the route where a delay is caused by road repairs, or an accident, etc. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 76 and 78.) 1. Touch "Route". 2. Touch "Detour". 79 - 2011 Toyota RAV4 | Navigation Manual - Page 74
search for the route based on the traffic congestion information received from XMr NavTraffic. For details, see "XMr NavTraffic" on page 120. This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam - 2011 Toyota RAV4 | Navigation Manual - Page 75
.) 1. Touch "Route". 1. Touch "Route". 2. Touch "Route Preference" to change the conditions that determine the route to the destination. 2. Touch "Start from Adjacent When searching for a route, the system will avoid routes when the indicator is off. 4. After choosing the desired route preference, touch " - 2011 Toyota RAV4 | Navigation Manual - Page 76
the screen. Touch the desired Point of Interest category to display POI location symbols on the map screen. By selecting the desired POI category and Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 83.) A - 2011 Toyota RAV4 | Navigation Manual - Page 77
complete list, the screen will display symbols of those locations on the map screen. D To display the local the map screen. "On Route": When the indicator is illuminated by touching this button, the list categories from the list. The selected category icon appears on the top left of the screen. By - 2011 Toyota RAV4 | Navigation Manual - Page 78
and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 65.) 2. Touch "Route Overview". The entire route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages - 2011 Toyota RAV4 | Navigation Manual - Page 79
requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting point, along with the distance to the next turn. These marks indicate the direction in which you should turn at an - 2011 Toyota RAV4 | Navigation Manual - Page 80
This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the next destination. review the route to the previous destination or starting point. : To review the route to the previous destination or starting point in fast−forward mode. : To indicate - 2011 Toyota RAV4 | Navigation Manual - Page 81
ROUTE GUIDANCE "Record": To start recording the route trace. "Stop": To stop recording the route trace. If you touch "Stop" to display the following screen. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is - 2011 Toyota RAV4 | Navigation Manual - Page 82
ROUTE GUIDANCE 88 - 2011 Toyota RAV4 | Navigation Manual - Page 83
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use D Quick reference ("Menu" screen) D Quick reference ("Setup" screen) D Suspending and resuming guidance D Volume D User selection 4 90 91 92 93 94 D My places 96 Registering memory points ...97 Editing - 2011 Toyota RAV4 | Navigation Manual - Page 84
this screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...180 1 5 "Select User" Up to 3 different settings for NavTraffic information...120 7 "Setup" Enables various settings for the navigation system...91, 110 8 "My Places" Enables changes to "Memory points", - 2011 Toyota RAV4 | Navigation Manual - Page 85
Setup" screen can be set. To display the "Setup" screen, push the "MENU" button and touch "Setup". 1 "Unit of Measurement" The distance units "km" or "miles" can be selected...111 2 "Estimated Travel Time" The system modes...116 10 "Auto Voice Guidance" Automatic voice guidance can be set...117 91 - 2011 Toyota RAV4 | Navigation Manual - Page 86
...117 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...118 13 "Default" This touch screen button initializes all of the settings...110 14 "?" Function help for the "Setup" screen can be viewed...29 D To suspend guidance 1. Push the "MENU" button. 2. Touch - 2011 Toyota RAV4 | Navigation Manual - Page 87
"MENU" button. The voice guidance volume can be adjusted or switched off. 2. Touch "Resume Guidance". 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Volume". To adjust the volume, select the desired level by touching the appropriate - 2011 Toyota RAV4 | Navigation Manual - Page 88
By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator will be highlighted. The system can memorize the following settings for up to three users - 2011 Toyota RAV4 | Navigation Manual - Page 89
ADVANCED FUNCTIONS D To register D To change user 1. Touch "Memorize". The confirmation screen will be displayed. Touch "User number". The above message appears, then the map screen will be displayed. 2. To register, touch "Yes". To return to the previous screen, touch "No" or . When a button - 2011 Toyota RAV4 | Navigation Manual - Page 90
ADVANCED FUNCTIONS My places - D To delete user Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 46, " - Destination search by Quick access" on page 46 and " - Destination search by Memory" on - 2011 Toyota RAV4 | Navigation Manual - Page 91
Deleting previous points" on page 110.) 9 Number of remaining memory points 10 Number of remaining areas to avoid 3. Touch "Register". 4. Enter the location in the same way as for a destination search. (See "Destination search" on page 43.) After memory point registration is completed, the "Memory - 2011 Toyota RAV4 | Navigation Manual - Page 92
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 5. Touch "OK". To - 2011 Toyota RAV4 | Navigation Manual - Page 93
ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. Name": To edit memory point names. The names can be displayed on the map. (See page 101.) "Location": To edit location information. (See page 102.) "Phone #": To edit telephone numbers. (See page 103.) 6. Touch "OK - 2011 Toyota RAV4 | Navigation Manual - Page 94
Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory Memory Point" screen. 2. Touch the desired sound icon. The next screen appears when "Bell (with Direction)" is touched. 2. Touch the desired attribute. - 2011 Toyota RAV4 | Navigation Manual - Page 95
ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch " - 2011 Toyota RAV4 | Navigation Manual - Page 96
ADVANCED FUNCTIONS DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory Point" screen. To not show it, touch "OFF". 2. Touch the - 2011 Toyota RAV4 | Navigation Manual - Page 97
ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. 1. Push to be deleted. "Delete All": To delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 103 - 2011 Toyota RAV4 | Navigation Manual - Page 98
completed, the "Memory Point" screen will be displayed. 5. Touch "OK". To edit registered information, see " - Editing memory points" on page 98. 3. Touch "Register". 4. Enter the location in the same way as for a destination search. (See "Destination search" on page 43.) 104 - 2011 Toyota RAV4 | Navigation Manual - Page 99
Touch "My Places" on the "Menu" screen. 3. Touch "Delete". 4. To delete home, touch "Yes". To cancel the deletion, touch "No". 3. Touch "Register". 4. Enter the location in the same way as for a destination search, or display the map of the area to be avoided. (See "Destination search" on page 43 - 2011 Toyota RAV4 | Navigation Manual - Page 100
or to change the size of the area to be avoided. 8. Touch "OK". INFORMATION D If a destination is input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown. D Up to 10 locations can be - 2011 Toyota RAV4 | Navigation Manual - Page 101
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. 5. Touch the button to be edited. "Name": To edit the name of the area to avoid. The names can be displayed on the map. (See page 107.) "Location": To edit area location. (See page 108.) "Area Size": To edit - 2011 Toyota RAV4 | Navigation Manual - Page 102
NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. To show the name, touch "ON" on the "Edit Area to Avoid" screen. To not show it - 2011 Toyota RAV4 | Navigation Manual - Page 103
Area Size" on the "Edit Area to Avoid" screen. 1. Push the "MENU" button. 2. Touch "My Places" on the "Menu" screen. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 3. Touch "Delete". 4. Touch the button to be deleted. "Delete - 2011 Toyota RAV4 | Navigation Manual - Page 104
Previous Points". 1. Push the "MENU" button. 4. Touch the button you want to delete. "Delete All": To delete all previous points in the system. 2. Touch "Setup". 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The previous - 2011 Toyota RAV4 | Navigation Manual - Page 105
Unit of Measurement Unit of Measurement can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D 3. Touch "Set Speed" of the "Estimated Travel Time". INFORMATION This function is available only in English or Spanish. To switch language, see "Selecting a language" on - 2011 Toyota RAV4 | Navigation Manual - Page 106
D Input key layout INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the input key layout. - 2011 Toyota RAV4 | Navigation Manual - Page 107
ADVANCED FUNCTIONS D Time zone Time zone can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. When you touch "Other", this screen is displayed. Touch "Y" or "B" to adjust the time zone. 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed - 2011 Toyota RAV4 | Navigation Manual - Page 108
touch screen button and current street name on the map screen can be displayed or hidden. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. D POI category change (Display POI Icons) Select from among the 6 icons displayed on the "Display POI Icons" top screen, so that setting of the - 2011 Toyota RAV4 | Navigation Manual - Page 109
"Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet (100 m). To turn the "Display Building Shapes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 5. Touch the category button - 2011 Toyota RAV4 | Navigation Manual - Page 110
turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch to display page 2 of the "Setup" screen. 3. Touch "ON" of "Traffic Restrict. Notification". The selected - 2011 Toyota RAV4 | Navigation Manual - Page 111
on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance can be heard only if the "MAP/VOICE" button is pushed. To turn the "Auto Voice Guidance" mode on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch - 2011 Toyota RAV4 | Navigation Manual - Page 112
position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch twice to display page 3 of the "Setup" screen. This message appears when the system is in the POI mode - 2011 Toyota RAV4 | Navigation Manual - Page 113
ADVANCED FUNCTIONS POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 3. Touch "Enter". 1. Touch "Position/Direction". - 2011 Toyota RAV4 | Navigation Manual - Page 114
For details about service and activation, call XMr Listener Care at 1−800−967−2346. Customers should have their Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map screen will be displayed. INFORMATION Cargo - 2011 Toyota RAV4 | Navigation Manual - Page 115
Traffic information is displayed on the map. (See page 122.) 2 Auto Avoid Traffic If any heavy congestion or moderate traffic has been detected on may be possible for you to select another route offered by the system. (See page 123.) 3 Traffic Voice Guidance Traffic information is provided - 2011 Toyota RAV4 | Navigation Manual - Page 116
information arrow When any XMr NavTraffic information has been received, the XMr NavTraffic information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow": Moderate traffic "Green": Freely flowing - 2011 Toyota RAV4 | Navigation Manual - Page 117
received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic indicator will start voice guidance. (b) Auto Avoid Traffic The guidance route automatically changes to another route to avoid heavy congestion. Touch "ON" of the "Auto - 2011 Toyota RAV4 | Navigation Manual - Page 118
Guidance You can receive congestion information through voice guidance while being guided to your destination. (d) Show Free Flowing Traffic Freely flowing Free Flowing Traffic". INFORMATION This function is available only in English. To switch language, see "Selecting a language" on page - 2011 Toyota RAV4 | Navigation Manual - Page 119
(e) XMr NavTraffic text information When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. 1. Touch "Info." to display the "Traffic Information" screen. 2. Touch "Detail" to display detailed traffic event information. 125 - 2011 Toyota RAV4 | Navigation Manual - Page 120
ADVANCED FUNCTIONS 126 - 2011 Toyota RAV4 | Navigation Manual - Page 121
OTHER FUNCTIONS SECTION OTHER FUNCTIONS D Maintenance information Maintenance information setting ...Dealer setting ...D Calendar with memo Adding a memo ...Editing a memo ...Memo list ...D Screen adjustment D Screen setting D Beep setting D Selecting a language 5 128 128 130 132 134 135 135 - 2011 Toyota RAV4 | Navigation Manual - Page 122
To cancel all conditions which have been inputted. "Reset All": To reset the item which has satisfied a condition. "Set Dealer": To register or edit dealer information. (See " - Dealer setting" on page 130.) If "ON" is selected, the system gives maintenance information with the "Information" screen - 2011 Toyota RAV4 | Navigation Manual - Page 123
": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter "PERSONAL - 2011 Toyota RAV4 | Navigation Manual - Page 124
setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on the "Maintenance" screen. 5. Touch the button to be edited - 2011 Toyota RAV4 | Navigation Manual - Page 125
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will - 2011 Toyota RAV4 | Navigation Manual - Page 126
#" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 25.) Memos can also be used for route guidance if the memo has been registered with location information. 2. Enter the - 2011 Toyota RAV4 | Navigation Manual - Page 127
a memo" on page 134.) "Mark f": To change the color of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the - 2011 Toyota RAV4 | Navigation Manual - Page 128
system informs of the memo entry when the system is started on the memo date. (See page 25.) 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the date on the memo, touch "Location". A screen similar to the destination search screen appears. Search the same way as - 2011 Toyota RAV4 | Navigation Manual - Page 129
the item to be edited. "Memo": To edit a memo. (See " - Adding a memo" on page 134.) "Location": To change a registered location. (See " - Adding a memo" on page 134.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page 65.) "Delete": To delete the memo - 2011 Toyota RAV4 | Navigation Manual - Page 130
OTHER FUNCTIONS D To display memos for a specified period of time 1. Touch "Period" on the "Memo Search" screen. 5. To delete and/or edit the memo, touch the desired memo button. "Delete All": To delete all the displayed memos. A message will be displayed. 6. To delete, touch "Yes". To cancel the - 2011 Toyota RAV4 | Navigation Manual - Page 131
of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and Off" is touched. To turn the display screen back on, push any button such as "DISP/TILT", etc. The selected screen appears. 1. Push the "DISP/TILT" button. INFORMATION When - 2011 Toyota RAV4 | Navigation Manual - Page 132
day mode and night mode Depending on the position of the headlight switch, the screen changes to the day mode or night mode. 1. Push the "INFO" button. To with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 138 - 2011 Toyota RAV4 | Navigation Manual - Page 133
select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch screen buttons. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio screen 20 seconds after - 2011 Toyota RAV4 | Navigation Manual - Page 134
points D Areas to avoid D Previous points D Route trace D User selection settings This function is available only when the vehicle is not moving. 1. Touch "Delete personal data". The "Delete personal data" screen appears. 2. Touch "Delete". The "Confirmation to delete all personal data" screen - 2011 Toyota RAV4 | Navigation Manual - Page 135
You can set a beep sound off. Selecting a language The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. 1. Push the "INFO" button. 1. Push the "INFO" button. 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off - 2011 Toyota RAV4 | Navigation Manual - Page 136
çais" or "Español" to select a language. If a screen other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 142 - 2011 Toyota RAV4 | Navigation Manual - Page 137
AUDIO SYSTEM SECTION AUDIO SYSTEM D Quick reference D Using your audio system Some basics ...Radio operation ...Radio operation (XM Satellite Radio broadcast) ...CD player operation ...D Audio remote controls D Audio system operating hints 6 144 145 145 149 151 158 169 170 143 - 2011 Toyota RAV4 | Navigation Manual - Page 138
audio control screen. For details, see page 146. " " button Push this button to insert or eject a disc. For details, see pages 158 and 160. "DISC·AUX" button Push this button to turn the CD player and AUX this knob to turn the audio system on and off, and turn it to adjust the volume. For details, see - 2011 Toyota RAV4 | Navigation Manual - Page 139
to your system. Vehicles with smart key system - Your audio system works when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode. Vehicles without smart key system - Your audio system works when the engine switch is in "ACC" or "ON" position. This device complies with part 15 of - 2011 Toyota RAV4 | Navigation Manual - Page 140
this knob to adjust the volume. The system turns on in the last mode used. You can select the function that enables automatic return to the previous screen from the audio screen. See "(a) Automatic transition" on page 139 for details. Push "AM·SAT", "FM" or "DISC·AUX" button to turn on the desired - 2011 Toyota RAV4 | Navigation Manual - Page 141
AUDIO SYSTEM Touch them lightly and directly on the screen. The selected button is highlighted. INFORMATION D If the system does not respond to a touch of a touch screen button, move your finger away from the screen and then touch it again. D You cannot operate dimmed - 2011 Toyota RAV4 | Navigation Manual - Page 142
AUDIO SYSTEM D Tone and balance How good an audio program sounds to you is largely determined by the mix of Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another - 2011 Toyota RAV4 | Navigation Manual - Page 143
port The sound of portable audio players connected to the AUX port can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual". Push these buttons to choose either an AM or FM station. "AM", "FM1" or "FM2" appears on the screen. If your vehicle is - 2011 Toyota RAV4 | Navigation Manual - Page 144
down the station band. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely - 2011 Toyota RAV4 | Navigation Manual - Page 145
AUDIO SYSTEM - Radio operation (XMr Satellite Radio broadcast) D Selecting a station Tune the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XMr Satellite Radio customer service agreement. Customers should have their - 2011 Toyota RAV4 | Navigation Manual - Page 146
AUDIO SYSTEM Satellite tuner technology notice: Toyota's satellite radio tuners are awarded Type Approval Certificates from XMr Satellite Radio Inc. as proof of compatibility with the services service or when reporting a problem. If appears on the display. INFORMATION Cargo - 2011 Toyota RAV4 | Navigation Manual - Page 147
AUDIO SYSTEM D Channel category D Presetting a channel 1. Tune in the desired channel. Touch either button and the name and number of the channel appears on the touch screen button. Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the - 2011 Toyota RAV4 | Navigation Manual - Page 148
AUDIO SYSTEM D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector button (1 - 6) for the channel you want. The button (1 - 6) is highlighted and channel number appears on the display. To select channel within the current - 2011 Toyota RAV4 | Navigation Manual - Page 149
AUDIO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "TEXT" again, the display returns. 155 - 2011 Toyota RAV4 | Navigation Manual - Page 150
AUDIO SYSTEM D If the satellite radio tuner malfunctions When problems occur with the XMr tuner, a message will appear on the display. Referring to the table below to identify the problem, take the suggested corrective action. The XMr antenna is not connected. Check whether the XMr antenna cable is - 2011 Toyota RAV4 | Navigation Manual - Page 151
AUDIO SYSTEM NOTICE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, - 2011 Toyota RAV4 | Navigation Manual - Page 152
164 For appropriate discs for this changer, see "Audio system operating hints" on page 170. (a) Inserting discs Vehicles with smart key system - The "ENGINE START STOP" switch must be set at ACCESSORY or IGNITION ON mode. Vehicles without smart key system - The engine switch must be set at "ACC" or - 2011 Toyota RAV4 | Navigation Manual - Page 153
. After insertion, the set disc is automatically loaded. If the label faces down, the disc cannot be played. In this case, "CD Check" appears on the screen. NOTICE Do not obstruct the display while it is moving. It could damage your audio system. INFORMATION Under extremely cold conditions, the - 2011 Toyota RAV4 | Navigation Manual - Page 154
AUDIO SYSTEM (b) Ejecting discs (c) Playing a disc Push the " " button. The display will open and the disc will be ejected. A disc can then be inserted. Push the "DISC·AUX" button if the disc are already loaded in the CD player. The "CD" screen will be displayed. NOTICE If a disc cannot be - 2011 Toyota RAV4 | Navigation Manual - Page 155
CD D Selecting a desired track Push the "AUDIO" button to display this screen. "TUNE·SEEK/TRACK" button: Use for a direct access to a desired track. Push " " or " " sides of the "TUNE·SEEK/TRACK" button and repeat it until the desired track number appears on the screen. As you release the button - 2011 Toyota RAV4 | Navigation Manual - Page 156
AUDIO SYSTEM D Searching for a desired track Touch the desired track number. The CD the button, the CD player will resume playing. While the disc is playing, touch "SCAN" briefly. "SCAN" appears on the screen. The CD player will play the next track for 10 seconds, then scan again. To select a - 2011 Toyota RAV4 | Navigation Manual - Page 157
AUDIO SYSTEM D Other functions "RAND": Use it for automatic and random selection. While the disc is playing, touch "RAND" briefly. "RAND" appears on the screen. The system briefly. "RPT" appears on the screen. When the track is finished, the CD player will automatically go back to the beginning of - 2011 Toyota RAV4 | Navigation Manual - Page 158
AUDIO SYSTEM (e) Operating a MP3/WMA disc D Playing a MP3/WMA disc D Selecting a desired folder "FOLDERY": Touch this button to go to the next folder. "FOLDERB": Touch this button to go to the previous folder. "FOLDER LIST": The desired folder can be selected in a list. This function is available - 2011 Toyota RAV4 | Navigation Manual - Page 159
AUDIO SYSTEM D Selecting a desired file "FILE": The desired file can be selected in a list. This function is available only when the vehicle RPT" is on, the file number within the folder you are currently being listened to appears. Fast forward: Push " " sides of the "TUNE·SEEK/TRACK" button and - 2011 Toyota RAV4 | Navigation Manual - Page 160
AUDIO SYSTEM D Searching for a desired file Touch the desired file number. The CD the file currently playing is displayed. This function is available only when the vehicle is not moving. While the disc is playing, touch "SCAN" briefly. "SCAN" appears on the screen. The changer will play the next - 2011 Toyota RAV4 | Navigation Manual - Page 161
AUDIO SYSTEM D Searching for a desired folder D Other functions While the disc is playing, touch "SCAN" and hold it until the "FLD.SCAN" appears , touch"RPT" briefly. "RPT" appears on the screen. When the file is finished, the CD player will automatically go back to the beginning of the file and - 2011 Toyota RAV4 | Navigation Manual - Page 162
player or another unit equipped with the player malfunctions, your audio system will display following messages. If "No CD" appears on the display: It indicates that there is no disc in the CD player. If "CD Check" appears on the display: It indicates that the disc dirty, damaged, or it was inserted - 2011 Toyota RAV4 | Navigation Manual - Page 163
"MODE" switch, the system changes the audio mode. To turn the audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until you hear a beep. Some parts of the audio system can be adjusted with the switches on the steering wheel. Details of the specific - 2011 Toyota RAV4 | Navigation Manual - Page 164
it possible for two signals to reach your antenna at the same time. If this happens, the noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. Radio reception Usually, the problem with radio reception does not mean there is a problem - 2011 Toyota RAV4 | Navigation Manual - Page 165
system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with .mp3 or .wma file extensions as MP3 or WMA files. To prevent noise is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. (The system can - 2011 Toyota RAV4 | Navigation Manual - Page 166
AUDIO SYSTEM CD−R AND CD−RW DISCS D CD−R/CD−RW discs that have not 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.wma 005.mp3 Folder 3 will begin more slowly than with a conventional CD or CD−R disc. Recordings on CD−R/CD−RW cannot be played using the DDCD (Double Density CD) system. 172 - 2011 Toyota RAV4 | Navigation Manual - Page 167
AUDIO SYSTEM CARING FOR YOUR CD PLAYER AND DISCS D Your CD player is intended for use with 4.7 in. (12 cm) discs only. D Extremely high temperature can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy roads or - 2011 Toyota RAV4 | Navigation Manual - Page 168
in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to the player. D If a disc cannot be ejected, do - 2011 Toyota RAV4 | Navigation Manual - Page 169
AUDIO SYSTEM " Correct " Wrong D Handle discs carefully, especially when you are inserting them. skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from - 2011 Toyota RAV4 | Navigation Manual - Page 170
AUDIO SYSTEM TERMS Packet write- This is a general term that describes the process of writing Although the tags are restricted to the number of characters, the information can be viewed when the track is played back. WMA Tag- WMA files can contain a WMA tag that is used in the same way as an ID3 - 2011 Toyota RAV4 | Navigation Manual - Page 171
APPENDIX SECTION APPENDIX D Limitations of the navigation system D Map database information and updates 7 178 180 177 - 2011 Toyota RAV4 | Navigation Manual - Page 172
navigation system will compensate for this most of the time, occasional positioning errors of up to 300 feet (100 m) can and should be expected. Generally, position errors will be corrected within a few seconds. When your vehicle is receiving signals from the satellites, the "GPS" mark appears at - 2011 Toyota RAV4 | Navigation Manual - Page 173
manually. available for the next turn to the right or left. D It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown or announced. D A location - 2011 Toyota RAV4 | Navigation Manual - Page 174
Map database information and updates - After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 120.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or - 2011 Toyota RAV4 | Navigation Manual - Page 175
LOCATION CODES AND RELATED PRODUCTS (COLLECTIVELY, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM from or publish any part of the DATABASE engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system - 2011 Toyota RAV4 | Navigation Manual - Page 176
DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE information due to the passage of time, changing circumstances, and due to the nature of the ; road slope or grade; bridge height, weight or other limits; road or traffic conditions; - 2011 Toyota RAV4 | Navigation Manual - Page 177
the DATABASE held by you shall immediately be destroyed. If any court of competent jurisdiction considers this clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered terminated and null and void, in its entirety, and any and all copies of the DATABASE - 2011 Toyota RAV4 | Navigation Manual - Page 178
vehicle navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service bureau, notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion - 2011 Toyota RAV4 | Navigation Manual - Page 179
inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF DENSO OR ITS LICENSORS HAVE BEEN ADVISED OF - 2011 Toyota RAV4 | Navigation Manual - Page 180
APPENDIX Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export - 2011 Toyota RAV4 | Navigation Manual - Page 181
CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. remove any copyright notices that appear on the information in any way. You may not decompile, disassemble or reverse engineer any portion of this - 2011 Toyota RAV4 | Navigation Manual - Page 182
resulting in death), demand, action, cost, expense, or claim of any by this product to indicate business locations are the marks of system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability - 2011 Toyota RAV4 | Navigation Manual - Page 183
APPENDIX - Changing the map DVD−ROM 1. Push the "MENU" button. 4. Insert the new map DVD−ROM with the label side up. 5. Push the " display. " button to close the 2. Touch "Map DVD". 3. Touch " DVD−ROM. DVD" to eject the map 189 - 2011 Toyota RAV4 | Navigation Manual - Page 184
braking or in an accident. D To reduce the chance of injury in the case of an accident or sudden stopping while driving It could damage your navigation system. D If a disc cannot this time, the audio disc and the Covered Area". Confirm the covered area on the screen. Contact your Toyota dealer to - 2011 Toyota RAV4 | Navigation Manual - Page 185
operation of the device. This Category II radiocommunication device complies with Industry Canada Standard RSS−310. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes: (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du dispositif doit être prêt - 2011 Toyota RAV4 | Navigation Manual - Page 186
APPENDIX 192 - 2011 Toyota RAV4 | Navigation Manual - Page 187
and other vehicle sensors, the system indicates your present position and assists in locating a desired destination. The navigation system is designed to select efficient routes from your present starting location to your destination. The system is also designed to direct you to a destination - 2011 Toyota RAV4 | Navigation Manual - Page 188
RAV4_Navi_U Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of , vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 178 through 179. 2 - 2011 Toyota RAV4 | Navigation Manual - Page 189
the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons - 2011 Toyota RAV4 | Navigation Manual - Page 190
the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver's personal judgement. Use this system only in locations where it is legal to do so. Some - 2011 Toyota RAV4 | Navigation Manual - Page 191
Quick guide - - Overview buttons and guidance screen 0U5122X No. 1 2 Name North−up or heading−up symbol Scale indicator "MAP/VOICE" button "DEST" button "MENU" button "DISP/TILT" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map - 2011 Toyota RAV4 | Navigation Manual - Page 192
position or the cursor position as a memory point. Touch this button to change the route. Touch this button to browse information about guidance route, to to display the foot print map and the building information. Touch this button to change the screen mode. Page 128, 132, 138, 141 37 31 76, 78 82 - 2011 Toyota RAV4 | Navigation Manual - Page 193
- Registering home 1 Push "DEST" button. 0U5117X 2 Touch . If home has not been registered, you can register it by touching . 3 There are 11 different methods to search your home. See "Destination search" on page 43. 4 Touch "Enter". The "Memory Point" screen is displayed. 7 - 2011 Toyota RAV4 | Navigation Manual - Page 194
5 Touch "OK". Registration of home is complete. You can also register home by touching the "MENU" button. (See " - Registering home" on page 104.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) 8 - 2011 Toyota RAV4 | Navigation Manual - Page 195
- Registering preset memory points (Quick access) 1 Push "DEST" button. 0U5117X 2 Touch one of the quick access buttons. You can set a memory point to one of the quick access buttons which has not been set. 3 There are 12 different methods to search preset memory points. See "Destination - 2011 Toyota RAV4 | Navigation Manual - Page 196
can also register preset memory points by touching the "MENU" button. (See " - Registering memory points" on page 97.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 98.) The registered points can be used on the "Destination" screen - 2011 Toyota RAV4 | Navigation Manual - Page 197
12 different methods to search destinations. See "Destination search" on page 43. 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 65 - 2011 Toyota RAV4 | Navigation Manual - Page 198
has been registered. (To register "Home", see " - Registering home" on page 104.) 3 Touch "Enter". The navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 65