2011 Toyota Tundra Double Cab Owners Manual - Page 533

3-8. Other interior features n Reprogramming a button The individual HomeLink® buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the programming instructions. Operating the HomeLink® Press the appropriate HomeLink® button. The HomeLink® indicator on the HomeLink® transceiver should turn on. The HomeLink® continues to send a signal for a maximum of 20 seconds as long as the button is pressed. Reprogramming a HomeLink® button Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the "Programming HomeLink® (for U.S.A. owners)" instructions. (→P. 503) Erasing the entire HomeLink® memory (all three programs) Press and hold down the 2 outside buttons for 10 seconds until the indicator flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory. 3 Interior and exterior features 507