2011 Toyota Tundra Double Cab Owners Manual - Page 562

4-3. Do-it-yourself maintenance Remove the oil filler cap, turning it counterclockwise. Add engine oil slowly. Checking the dipstick. Reinstall the filler cap, turning it clockwise. The approximate quantity of oil needed to raise the level between low and full on the dipstick is indicated as follows: 1.6 qt. (1.5 L, 1.3 lmp. qt.) n Engine oil consumption l The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. l More oil is consumed under driving conditions such as high speeds and frequent acceleration and deceleration. l A new engine consumes more oil. l When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately. n After changing the engine oil (U.S.A. only) The oil change system should be reset. Perform the following procedures: Turn the engine switch off with the trip meter A reading shown. While pressing the trip meter reset button (→P. 192, 194), turn the engine switch on. Without multi-information display Continue to press and hold the button until the trip meter displays 000000. With multi-information display Continue to press and hold the button until "MAINT REQD RESET MODE COMPLETE" appears on the multi-information display. 4 Maintenance and care 537