2012 Toyota 4Runner Navigation Manual
2012 Toyota 4Runner Manual
2012 Toyota 4Runner manual content summary:
- 2012 Toyota 4Runner | Navigation Manual - Page 1
4RUNNER 2 0 1 2 CUSTOMER EXPERIENCE CENTER 1-800-331-4331 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 10/11 11-TCS-05014 00505-NAV12-4RUN - 2012 Toyota 4Runner | Navigation Manual - Page 2
21 LIMITATIONS OF THE QUICK REFERENCE GUIDE The Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage you to review - 2012 Toyota 4Runner | Navigation Manual - Page 3
. CURRENT VEHICLE POSITION Mark Indicates the current position of the vehicle and its directional heading. NORTH-UP OR COMPASS MODE Icon Touch to change the map display between North-up or Head-up perspectives. Ó Ç n Î { SETUP Button Adjust Preferences for: General Settings, Clock, Voice - 2012 Toyota 4Runner | Navigation Manual - Page 4
Press by DEST on the faceplate followed step . 2 Touch and move to step 4. To change Search Area, touch and move to step 3. step 3 Select the desired Search Area and such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. 3 - 2012 Toyota 4Runner | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Touch the desired street name. step 8 Input the house number and touch . step 9 Touch . step 10 Select the desired Route Preferences by touching followed by . Touch to confirm selection. step 11 Touch guidance. to start route 4 - 2012 Toyota 4Runner | Navigation Manual - Page 6
The navigation system's voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every - 2012 Toyota 4Runner | Navigation Manual - Page 7
DESTINATION INPUT BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the - 2012 Toyota 4Runner | Navigation Manual - Page 8
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY NAME step 1 Press DEST on the faceplate followed by . step 2 Touch . step 3 Input the POI name and touch . step 4 Use or to scroll up or down. Touch the desired destination. Quick Tip - If the POI isn't listed in the - 2012 Toyota 4Runner | Navigation Manual - Page 9
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press DEST on the faceplate followed by . step 2 Touch . step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 Use or to scroll - 2012 Toyota 4Runner | Navigation Manual - Page 10
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press on the steering wheel. After the beep say, "Destination." step 2 After the beep say, "Point of Interest." Quick Tip - If you know your next command, you can press at - 2012 Toyota 4Runner | Navigation Manual - Page 11
SET HOME step 1 Press by SETUP on the faceplate followed . step 2 Touch . step 3 Touch . step 4 Touch . Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch . step 6 Input - 2012 Toyota 4Runner | Navigation Manual - Page 12
- Enter the street name without prefixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen number and touch . step 11 Touch icon. followed by to change the home step 12 Touch the desired icon for your home. Touch at the - 2012 Toyota 4Runner | Navigation Manual - Page 13
that Touch Bluetooth feature on the phone is ON and is in discoverable mode. step 3 Input the passkey listed on the screen into the approved Bluetooth cell phone. Please refer to the cell phone manufacturer's user guide for pairing procedures. step 4 Upon connection, the system will indicate - 2012 Toyota 4Runner | Navigation Manual - Page 14
beep. step 3 After the beep say the phone number digits individually, without pausing (e.g. "Three, one, zero, four..."). step 4 After the beep, say "Dial" or press on the steering wheel. Some Bluetooth® equipped cell phones may or may not show battery or signal strength on the display. Quick - 2012 Toyota 4Runner | Navigation Manual - Page 15
your cell phone book, please refer to the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you entered in your phone when in the telephone screen. step 1 Press on the steering wheel. After the beep say, "Phone." step 2 After the beep say, "Dial - 2012 Toyota 4Runner | Navigation Manual - Page 16
route Short- is the most direct based upon driven mileage Single Sing gle Map * Turn List Dual Map * Arrow Compass * Intersection Guidance to select from seven different screen Touch viewing options. Four screen preferences are available when the map is visible and three additional are - 2012 Toyota 4Runner | Navigation Manual - Page 17
FEATURES option. AUTO SCREEN CHANGE VOICE RECOGNITION GUIDANCE PRESS SETUP > PRESS SETUP > Once the screen transition is switched off, the audio screen will remain without reverting to the map display. Disables system guidance for voice commands. Only on-screen guidance will be available - 2012 Toyota 4Runner | Navigation Manual - Page 18
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME - 2012 Toyota 4Runner | Navigation Manual - Page 19
system to display continuously updated traffic information for 100 markets. New 4RUNNER service at the end of your complimentary trial, the plan you choose will automatically renew and bill at then-current rates until you call 1-866-635-2349 to cancel. Fees and programming subject to change. Available - 2012 Toyota 4Runner | Navigation Manual - Page 20
by colored lines alongside freeway or highways: Free flow traffic Moderate traffic Heavy congestion AUTO AVOID TRAFFIC step 1 Press by SETUP on the faceplate followed . step 2 Touch . step 3 19 Select from the Auto Avoid Traffic option. Touch followed by . The system will automatically - 2012 Toyota 4Runner | Navigation Manual - Page 21
NAVTRAFFIC NAVTRAFFIC PREFERENCES TRAFFIC VOICE GUIDANCE step 1 Press by SETUP on the faceplate followed . step 2 to display Traffic Voice Touch Guidance option on page 2. Select to receive voice notification of traffic events within 20 miles along the current route. Touch followed by . SHOW - 2012 Toyota 4Runner | Navigation Manual - Page 22
COMMANDS Press and release on the steering wheel to activate the voice recognition feature. After the beep, say one of the voice commands shown on the screen or listed below. Please refer to the Navigation Owner's Manual for additional information. AUDIO MODE MODE Radio AM FM FM1 FM2 Satellite - 2012 Toyota 4Runner | Navigation Manual - Page 23
VOICE COMMANDS NAVIGATION MODE POI (POI must be entered via the destination screen, see page 9.) Attractions Automobile Clubs Auto Service & Maint. Car Rental Agencies Car Washes Dealerships Gas Lexus Parking Parts Stores Roadside Assistance Toyota Other Automotive Banks ATMs Full-Service Banks City - 2012 Toyota 4Runner | Navigation Manual - Page 24
...Current position display ...Screen scroll operation (one−touch scroll) ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...Map icons ...D Speech command system ...33 33 33 39 41 42 43 43 44 Command list ...47 25 - 2012 Toyota 4Runner | Navigation Manual - Page 25
- 2012 Toyota 4Runner | Navigation Manual - Page 26
FUNCTIONS Initial screen When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds - 2012 Toyota 4Runner | Navigation Manual - Page 27
- 2012 Toyota 4Runner | Navigation Manual - Page 28
system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date be slightly distorted when the display is cold. D Under extremely cold conditions, the map may not be - 2012 Toyota 4Runner | Navigation Manual - Page 29
- 2012 Toyota 4Runner | Navigation Manual - Page 30
can be input via the touch screen. D To input letters and numbers To display the alphabet keys, touch "A−Z". INFORMATION Keyboard layout can be changed. (See page 214.) Enter letters by touching the keys directly. : Touching this button erases one letter. By holding this button, letters will - 2012 Toyota 4Runner | Navigation Manual - Page 31
- 2012 Toyota 4Runner | Navigation Manual - Page 32
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the system displays "∗∗" on the screen. 29 - 2012 Toyota 4Runner | Navigation Manual - Page 33
- 2012 Toyota 4Runner | Navigation Manual - Page 34
. 2. Select the desired sorting criteria. Sorting criteria are as follows: "Distance": To sort in the order of distance from your current location. "Date": To sort in the order of the date. "Category": To sort in the order of the category. "Icon": To sort in the order of the icons. "Name": To sort - 2012 Toyota 4Runner | Navigation Manual - Page 35
- 2012 Toyota 4Runner | Navigation Manual - Page 36
You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness adjustment The contrast and on, push the "DISP" button again, or push the "DEST" or another screen mode button. 1. Push the "DISP" button. INFORMATION When you do not touch any button - 2012 Toyota 4Runner | Navigation Manual - Page 37
- 2012 Toyota 4Runner | Navigation Manual - Page 38
the screen in day mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. . 2. Touch the - 2012 Toyota 4Runner | Navigation Manual - Page 39
- 2012 Toyota 4Runner | Navigation Manual - Page 40
any screen by pushing the "MAP·VOICE" button. While driving, the current vehicle position mark is fixed on the screen and the map moves. The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is - 2012 Toyota 4Runner | Navigation Manual - Page 41
- 2012 Toyota 4Runner | Navigation Manual - Page 42
the cursor position as an address book entry Address book entry registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) Touch "Mark - 2012 Toyota 4Runner | Navigation Manual - Page 43
- 2012 Toyota 4Runner | Navigation Manual - Page 44
BASIC FUNCTIONS To change the icon or name, etc., see " (b) Editing address book entries" on page 108. Up to 100 address book entries can be registered. If there is - 2012 Toyota 4Runner | Navigation Manual - Page 45
- 2012 Toyota 4Runner | Navigation Manual - Page 46
BASIC FUNCTIONS POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed at the top of the screen. INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 90.) Touch "Info.". Information such as the name, - 2012 Toyota 4Runner | Navigation Manual - Page 47
- 2012 Toyota 4Runner | Navigation Manual - Page 48
BASIC FUNCTIONS ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Information such as the name, address, and phone number are displayed. If "Enter " is touched, the position of the cursor is set as a - 2012 Toyota 4Runner | Navigation Manual - Page 49
- 2012 Toyota 4Runner | Navigation Manual - Page 50
XMr NavTraffic TEXT INFORMATION When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Touch "Info.". Touch "Info.". Information such as the name, address, and phone number are displayed. To delete a destination, touch "Delete - 2012 Toyota 4Runner | Navigation Manual - Page 51
- 2012 Toyota 4Runner | Navigation Manual - Page 52
cannot be selected. : To display the single map screen. (See page 40.) : To display the dual map screen. (See page 40.) : To display the compass mode screen. (See page 41.) : To display the freeway screen. (See page 76.) : To display the turn list screen. (See page 78.) : To display the arrow - 2012 Toyota 4Runner | Navigation Manual - Page 53
- 2012 Toyota 4Runner | Navigation Manual - Page 54
any specific point on the right side map. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 96.) 4. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the - 2012 Toyota 4Runner | Navigation Manual - Page 55
- 2012 Toyota 4Runner | Navigation Manual - Page 56
bar directly. It is not available while driving. The map scale is displayed under the north−up symbol or heading−up symbol at the top left of the screen. INFORMATION When the vehicle travels out of the coverage area, the guidance screen changes to the compass mode screen. INFORMATION When the map - 2012 Toyota 4Runner | Navigation Manual - Page 57
- 2012 Toyota 4Runner | Navigation Manual - Page 58
the foot print map changes into when the map is scaled down to 150 feet (50 m). D To display building information Information is available only for buildings area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one - 2012 Toyota 4Runner | Navigation Manual - Page 59
- 2012 Toyota 4Runner | Navigation Manual - Page 60
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. Touch or . -Map icons Icon Name Island - 2012 Toyota 4Runner | Navigation Manual - Page 61
- 2012 Toyota 4Runner | Navigation Manual - Page 62
BASIC FUNCTIONS Speech command system - The speech command system enables you to operate the navigation system, audio system and hands−free system by giving a command. 2. After a beep sounds, say the command of your choice. Speech commands are marked with . 1. Push the talk switch. After a beep - 2012 Toyota 4Runner | Navigation Manual - Page 63
- 2012 Toyota 4Runner | Navigation Manual - Page 64
the screen. If a desired outcome is not shown, or if no choices are available, say "Go back" or touch "Go Back" to return to the previous screen touch "Cancel", or push and hold the talk switch. If the navigation system does not respond or the confirmation screen does not disappear, please push the - 2012 Toyota 4Runner | Navigation Manual - Page 65
- 2012 Toyota 4Runner | Navigation Manual - Page 66
to the "Voice Menu" screen, say "Go back" or touch "Go Back". Touch "Cancel" or say "Cancel", and the speech command system will be canceled. clear. Note that certain words, accents, or speech patterns may be difficult for the system to recognize. D There are some noises such as wind noise, etc. 46 - 2012 Toyota 4Runner | Navigation Manual - Page 67
- 2012 Toyota 4Runner | Navigation Manual - Page 68
a voice recognition command list. You can operate the voice recognition system by saying any command from the displayed command list. However, the XMr NavTraffic commands cannot be used where the XMr NavTraffic service is not available. (For details, see "XMr NavTraffic" page 96.) 1. Push the talk - 2012 Toyota 4Runner | Navigation Manual - Page 69
- 2012 Toyota 4Runner | Navigation Manual - Page 70
:Changing map scale 1. Push the talk switch. 2. Say "Command list". 3. Say "Dual map". To confirm commands on the screen, touch or to scroll through the 3. Say "Zoom in" or "Zoom out". To confirm commands on the screen, touch or to scroll through the command list. This function is available - 2012 Toyota 4Runner | Navigation Manual - Page 71
- 2012 Toyota 4Runner | Navigation Manual - Page 72
DESTINATION SEARCH SECTION DESTINATION SEARCH D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Preset destinations ...Destination search by "Address" ...Destination search by "Point of Interest" ...Destination search by "Previous Destinations" - 2012 Toyota 4Runner | Navigation Manual - Page 73
- 2012 Toyota 4Runner | Navigation Manual - Page 74
- Selecting the search area Change the selected region in order to set a destination from a different region by using "Address", "Point of Interest" or "Intersection & Freeway". Push the "DEST" button. 1. Touch "Search Area" to display a map of the United States and Canada divided into 12 regions - 2012 Toyota 4Runner | Navigation Manual - Page 75
- 2012 Toyota 4Runner | Navigation Manual - Page 76
Jersey New York Rhode Island Vermont "US10" "HI" "US9" Washington, D.C. Delaware Maryland New Jersey Pennsylvania Virginia West Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in - 2012 Toyota 4Runner | Navigation Manual - Page 77
- 2012 Toyota 4Runner | Navigation Manual - Page 78
not been registered, a message will be displayed and the setting screen will automatically appear. To use this function, it is necessary to set a "Home" even while driving. 2. Touch any of the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays - 2012 Toyota 4Runner | Navigation Manual - Page 79
- 2012 Toyota 4Runner | Navigation Manual - Page 80
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to search a destination by address. (a) Search by city (b) Search by street address 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Selecting a city to search 1. Push the "DEST" button. 2. Touch " - 2012 Toyota 4Runner | Navigation Manual - Page 81
- 2012 Toyota 4Runner | Navigation Manual - Page 82
Input the street name and touch "OK". 8. Input a house number. 7. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) If the same - 2012 Toyota 4Runner | Navigation Manual - Page 83
- 2012 Toyota 4Runner | Navigation Manual - Page 84
5 Cities". 3. Touch "Street Address". 2. Touch the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See "(a) Selecting a city to search" on page 53.) 4. Touch - 2012 Toyota 4Runner | Navigation Manual - Page 85
- 2012 Toyota 4Runner | Navigation Manual - Page 86
70.) If the same address exists in more than one city, the current screen changes inputting the city name or to the address list screen. 8. Touch the button INFORMATION You can search for a street name using just the body. Example : S WESTERN AVE You can input "S WESTERN AVE", "WESTERN AVE" or " - 2012 Toyota 4Runner | Navigation Manual - Page 87
- 2012 Toyota 4Runner | Navigation Manual - Page 88
the button for the desired method. 4. Input the name of the Point of Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) When inputting the name - 2012 Toyota 4Runner | Navigation Manual - Page 89
- 2012 Toyota 4Runner | Navigation Manual - Page 90
DESTINATION SEARCH D Selecting a city to search Touch the button of the desired destination. If the same name exists in more than one city, a search can be performed more easily with "City" and "Category". (See "D Selecting a city to search" on page 58 and "D Selecting from the categories" on page - 2012 Toyota 4Runner | Navigation Manual - Page 91
- 2012 Toyota 4Runner | Navigation Manual - Page 92
DESTINATION SEARCH D Selecting from the categories (b) Search by "Category" The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "Point of Interest" on the "Destination" screen. 3. Touch "Category" on the "Point of Interest" screen. - 2012 Toyota 4Runner | Navigation Manual - Page 93
- 2012 Toyota 4Runner | Navigation Manual - Page 94
DESTINATION SEARCH SETTING THE SEARCH POINT FROM NEAR HERE Touch "Near Here". The search point is set at the current position, and the "POI Category" screen will be displayed. (See page 62.) SETTING THE SEARCH POINT FROM ALONG MY ROUTE Touch "Along My Route". The search point is set and the "POI - 2012 Toyota 4Runner | Navigation Manual - Page 95
- 2012 Toyota 4Runner | Navigation Manual - Page 96
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES 1. Touch "Near City Center". SETTING THE SEARCH POINT FROM NEAR A DESTINATION 1. Touch "Near a Destination". 2. Touch "Last 5 Cities". 2. Touch the button of the desired destination. The search point is set and the "POI Name" screen will be - 2012 Toyota 4Runner | Navigation Manual - Page 97
- 2012 Toyota 4Runner | Navigation Manual - Page 98
screen, touch "List All Categories" to list all POI categories. 4. Input a telephone number. 5. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) If there - 2012 Toyota 4Runner | Navigation Manual - Page 99
- 2012 Toyota 4Runner | Navigation Manual - Page 100
the button of the desired destination. "Delete": To delete the previous destination. (To delete previous destinations, see page 117.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) INFORMATION The - 2012 Toyota 4Runner | Navigation Manual - Page 101
- 2012 Toyota 4Runner | Navigation Manual - Page 102
Touch "Emergency" on the second page of the "Destination" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers, hospitals, or fire stations are shown. The current position is shown with an address - 2012 Toyota 4Runner | Navigation Manual - Page 103
- 2012 Toyota 4Runner | Navigation Manual - Page 104
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2012 Toyota 4Runner | Navigation Manual - Page 105
- 2012 Toyota 4Runner | Navigation Manual - Page 106
the destination to be set. 5. Touch "OK". 8. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) 6. Touch the button - 2012 Toyota 4Runner | Navigation Manual - Page 107
- 2012 Toyota 4Runner | Navigation Manual - Page 108
" screen. 3. Touch "Freeway Entrance/Exit" on the "Intersection & Freeway" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected - 2012 Toyota 4Runner | Navigation Manual - Page 109
- 2012 Toyota 4Runner | Navigation Manual - Page 110
entrance or exit name. 8. Touch "OK". Guidance starts if "OK" is touched even while driving. However, the cursor cannot be moved. 9. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See - 2012 Toyota 4Runner | Navigation Manual - Page 111
- 2012 Toyota 4Runner | Navigation Manual - Page 112
Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) 3. Touch the destination - 2012 Toyota 4Runner | Navigation Manual - Page 113
- 2012 Toyota 4Runner | Navigation Manual - Page 114
DESTINATION SEARCH Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION Set destinations can also - 2012 Toyota 4Runner | Navigation Manual - Page 115
- 2012 Toyota 4Runner | Navigation Manual - Page 116
m), the map scale changes to 0.5 miles (800 m) automatically. Set the destination again. D If a destination is entered, the road nearest to the point you selected is set as the destination. CAUTION Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign - 2012 Toyota 4Runner | Navigation Manual - Page 117
- 2012 Toyota 4Runner | Navigation Manual - Page 118
DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from 3 routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick", "Alt." or "Short" to select the desired route. "Quick": Recommended route. - 2012 Toyota 4Runner | Navigation Manual - Page 119
- 2012 Toyota 4Runner | Navigation Manual - Page 120
route guidance shows a sea route. After you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. Touch "Edit Route". "Add": To add destinations. (See page 82.) "Delete": To delete destinations. (See page 83.) "Reorder": To - 2012 Toyota 4Runner | Navigation Manual - Page 121
- 2012 Toyota 4Runner | Navigation Manual - Page 122
DESTINATION SEARCH 74 - 2012 Toyota 4Runner | Navigation Manual - Page 123
- 2012 Toyota 4Runner | Navigation Manual - Page 124
ROUTE GUIDANCE SECTION ROUTE GUIDANCE 3 D Route guidance screen ...76 D Typical voice guidance prompts ...79 D Distance and time to destination ...81 D Setting and deleting destinations ...82 Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Detour - 2012 Toyota 4Runner | Navigation Manual - Page 125
- 2012 Toyota 4Runner | Navigation Manual - Page 126
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the - 2012 Toyota 4Runner | Navigation Manual - Page 127
- 2012 Toyota 4Runner | Navigation Manual - Page 128
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2012 Toyota 4Runner | Navigation Manual - Page 129
- 2012 Toyota 4Runner | Navigation Manual - Page 130
screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen - 2012 Toyota 4Runner | Navigation Manual - Page 131
- 2012 Toyota 4Runner | Navigation Manual - Page 132
ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.5 miles 4.7 miles 0.5 miles 1 "Proceed about 4 miles to the traffic circle." "In half of a mile, traffic - 2012 Toyota 4Runner | Navigation Manual - Page 133
- 2012 Toyota 4Runner | Navigation Manual - Page 134
"In half of a mile, make a legal U−turn." "Make a legal U−turn ahead." (Beep sound only) 2 3 INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice - 2012 Toyota 4Runner | Navigation Manual - Page 135
- 2012 Toyota 4Runner | Navigation Manual - Page 136
the destination are displayed. When the vehicle is not on the guidance route, the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the distance and the estimated travel/arrival time from the current position to each - 2012 Toyota 4Runner | Navigation Manual - Page 137
- 2012 Toyota 4Runner | Navigation Manual - Page 138
the arrival order of the additional destination. 3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 82 - 2012 Toyota 4Runner | Navigation Manual - Page 139
- 2012 Toyota 4Runner | Navigation Manual - Page 140
the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set - 2012 Toyota 4Runner | Navigation Manual - Page 141
- 2012 Toyota 4Runner | Navigation Manual - Page 142
- Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where detour process. After detouring, the system returns to the original guidance route. "Whole Route": By touching this button, the system will calculate an entire new route to - 2012 Toyota 4Runner | Navigation Manual - Page 143
- 2012 Toyota 4Runner | Navigation Manual - Page 144
ROUTE GUIDANCE - Route overview 1. Touch "Route". This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the - 2012 Toyota 4Runner | Navigation Manual - Page 145
- 2012 Toyota 4Runner | Navigation Manual - Page 146
, not all 1. Touch "Route". road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting - 2012 Toyota 4Runner | Navigation Manual - Page 147
- 2012 Toyota 4Runner | Navigation Manual - Page 148
- Route preference D To select route type You can designate the route conditions of the route to the destination. : To indicate the next destination. : To preview the route to the next destination. : To preview the route to the next destination in fast−forward mode. : To stop the preview. : To - 2012 Toyota 4Runner | Navigation Manual - Page 149
- 2012 Toyota 4Runner | Navigation Manual - Page 150
GUIDANCE D To select route features A number of choices are provided on the conditions which the system uses to determine the route to the destination. The entire route from the starting point to the destination is displayed. "OK": To start guidance. "Edit Route": To change a route. (See page 73 - 2012 Toyota 4Runner | Navigation Manual - Page 151
- 2012 Toyota 4Runner | Navigation Manual - Page 152
ROUTE GUIDANCE - Pausing and resuming guidance D Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. Touch "Route - 2012 Toyota 4Runner | Navigation Manual - Page 153
- 2012 Toyota 4Runner | Navigation Manual - Page 154
Points of Interest such as gas stations and restaurants can be displayed Guidance". 2. Touch "Select POI" to display a particular type of Point of Interest on the screen. When the Points screen have already been set, "Change POI" is displayed. The screen will change to the current position map with - 2012 Toyota 4Runner | Navigation Manual - Page 155
- 2012 Toyota 4Runner | Navigation Manual - Page 156
, touch this button. "Find Local POI": When searching for the nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 200 miles (320 km). (See page 92.) Select the desired POI categories. The selected category icon appears on the top - 2012 Toyota 4Runner | Navigation Manual - Page 157
- 2012 Toyota 4Runner | Navigation Manual - Page 158
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 200 miles (320 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2012 Toyota 4Runner | Navigation Manual - Page 159
- 2012 Toyota 4Runner | Navigation Manual - Page 160
as a straight line from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 70.) 93 - 2012 Toyota 4Runner | Navigation Manual - Page 161
- 2012 Toyota 4Runner | Navigation Manual - Page 162
POI icons It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). 1. Touch "Show on Map". 2. Touch "POI Icons". The "POI Icons" indicator - 2012 Toyota 4Runner | Navigation Manual - Page 163
- 2012 Toyota 4Runner | Navigation Manual - Page 164
ROUTE GUIDANCE D To start recording the route trace D To stop recording the route trace 1. Touch "Show on Map". 1. Touch "Show on Map". 2. Touch "Route Trace". "Route Trace" indicator is highlighted. 2. Touch "Route Trace". The following screen will be displayed. Touching "Yes" stops - 2012 Toyota 4Runner | Navigation Manual - Page 165
- 2012 Toyota 4Runner | Navigation Manual - Page 166
ROUTE GUIDANCE XMr NavTraffic The XMr NavTraffic service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, a subscription to the XMr Satellite Radio with - 2012 Toyota 4Runner | Navigation Manual - Page 167
- 2012 Toyota 4Runner | Navigation Manual - Page 168
ROUTE GUIDANCE D Show XMr NavTraffic information XMr NavTraffic information is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 97 - 2012 Toyota 4Runner | Navigation Manual - Page 169
- 2012 Toyota 4Runner | Navigation Manual - Page 170
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2012 Toyota 4Runner | Navigation Manual - Page 171
- 2012 Toyota 4Runner | Navigation Manual - Page 172
MY PLACES SECTION MY PLACES D Navigation settings ...Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 100 101 103 106 112 117 99 - 2012 Toyota 4Runner | Navigation Manual - Page 173
- 2012 Toyota 4Runner | Navigation Manual - Page 174
MY PLACES Navigation settings - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 52, " - Destination search by Preset destinations" on page 52 and " - Destination search by "Address Book"" on - 2012 Toyota 4Runner | Navigation Manual - Page 175
- 2012 Toyota 4Runner | Navigation Manual - Page 176
MY PLACES - Setting up the "Home" If home has been registered, that information can be recalled by using the "Go Home" touch screen button on the "Destination" screen. (See "- Destination search by Home" on page 52.) 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. (a) - 2012 Toyota 4Runner | Navigation Manual - Page 177
- 2012 Toyota 4Runner | Navigation Manual - Page 178
" screen. 6. Touch "OK". To edit registered information, see "(b) Editing home" on page 102. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be displayed on the map. (See page 110.) "Location": To edit location information. (See page 111 - 2012 Toyota 4Runner | Navigation Manual - Page 179
- 2012 Toyota 4Runner | Navigation Manual - Page 180
MY PLACES - Setting up the "Preset Destinations" (c) Deleting home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. If preset destination has been registered, that information can be recalled by using the "Preset Destination" - 2012 Toyota 4Runner | Navigation Manual - Page 181
- 2012 Toyota 4Runner | Navigation Manual - Page 182
MY PLACES (a) Registering preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. When registration of preset destination is completed, the "Edit Preset Destination" screen will be displayed. 7. - 2012 Toyota 4Runner | Navigation Manual - Page 183
- 2012 Toyota 4Runner | Navigation Manual - Page 184
." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names can be displayed on the map. (See page 110.) "Location": To edit location information - 2012 Toyota 4Runner | Navigation Manual - Page 185
- 2012 Toyota 4Runner | Navigation Manual - Page 186
MY PLACES - Setting up the "Address Book" (c) Deleting preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. Points or areas on the map can be registered. 1. Push the "SETUP" button. 2. Touch "Navi - 2012 Toyota 4Runner | Navigation Manual - Page 187
- 2012 Toyota 4Runner | Navigation Manual - Page 188
MY PLACES (a) Registering address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing address book entries" on page 108. INFORMATION 4. Touch " - 2012 Toyota 4Runner | Navigation Manual - Page 189
- 2012 Toyota 4Runner | Navigation Manual - Page 190
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can be displayed on the map. (See page 110.) "Location": To edit location information - 2012 Toyota 4Runner | Navigation Manual - Page 191
- 2012 Toyota 4Runner | Navigation Manual - Page 192
Touch "Edit" of "Icon". 2. Touch the desired sound icon. The next screen appears when "Bell (with Direction)" is touched. 2. Touch the desired icon. Change pages by touching "Page 1", "Page 2" or "With Sound" tab. Touch either or to adjust the direction. Touch "OK". The bell sounds only when - 2012 Toyota 4Runner | Navigation Manual - Page 193
- 2012 Toyota 4Runner | Navigation Manual - Page 194
MY PLACES D To change "Name" DISPLAYING MEMORY POINT NAMES The name of an address book entry can be set to display on the map. 1. Touch "Edit" of "Name". To - 2012 Toyota 4Runner | Navigation Manual - Page 195
- 2012 Toyota 4Runner | Navigation Manual - Page 196
MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch one of the 8 directional touch screen buttons to move the cursor to the - 2012 Toyota 4Runner | Navigation Manual - Page 197
- 2012 Toyota 4Runner | Navigation Manual - Page 198
MY PLACES - Setting up the "Areas to Avoid" (c) Deleting address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. Areas you want to avoid because of traffic jams, construction work or other reasons can be - 2012 Toyota 4Runner | Navigation Manual - Page 199
- 2012 Toyota 4Runner | Navigation Manual - Page 200
avoided. (See "Destination search" on page 50.) 8. Touch either or to change the size of the area to be avoided. 9. Touch "OK". INFORMATION D input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be - 2012 Toyota 4Runner | Navigation Manual - Page 201
- 2012 Toyota 4Runner | Navigation Manual - Page 202
on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit the name of the area to avoid. The names can be or off the area to avoid feature. To turn on the feature touch "On" on the "Edit Area to Avoid" screen. To turn off the feature touch "Off" on the - 2012 Toyota 4Runner | Navigation Manual - Page 203
- 2012 Toyota 4Runner | Navigation Manual - Page 204
MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be - 2012 Toyota 4Runner | Navigation Manual - Page 205
- 2012 Toyota 4Runner | Navigation Manual - Page 206
screen to the debutton to move the cursor sired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 116 - 2012 Toyota 4Runner | Navigation Manual - Page 207
- 2012 Toyota 4Runner | Navigation Manual - Page 208
"Delete". 5. Touch the button to be deleted. "Select All": To select all registered areas to avoid in the system. "Unselect All": To unselect all registered areas to avoid in the system. 6. Touch "Delete". 7. To delete the area, touch "Yes". To cancel the deletion, touch "No". 4. Touch the button - 2012 Toyota 4Runner | Navigation Manual - Page 209
- 2012 Toyota 4Runner | Navigation Manual - Page 210
MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 118 - 2012 Toyota 4Runner | Navigation Manual - Page 211
- 2012 Toyota 4Runner | Navigation Manual - Page 212
SECTION TELEPHONE AND INFORMATION D Telephone (Hands−free system for cellular phone) ...Enter a Bluetoothr phone ...Call on the Bluetoothr phone ...Receive on the Bluetoothr phone ...Talk on the Bluetoothr phone ...D Fuel consumption ...Past record ...Consumption ...D Calendar ... 5 120 126 - 2012 Toyota 4Runner | Navigation Manual - Page 213
- 2012 Toyota 4Runner | Navigation Manual - Page 214
off the steering wheel by connecting your cellular phone. This system supports Bluetoothr. Bluetoothr is a wireless data system by which you can the following problems may occur. D The Bluetoothr connection may be cut. D Noise may be heard on the Bluetoothr audio playback. CAUTION While driving, do - 2012 Toyota 4Runner | Navigation Manual - Page 215
- 2012 Toyota 4Runner | Navigation Manual - Page 216
off the steering wheel. D PBAP (Phone Book Access Profile) Ver.1.0 If your cellular phone does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota. letstalk.com/" to find approved Bluetoothr phones for this system. 121 - 2012 Toyota 4Runner | Navigation Manual - Page 217
- 2012 Toyota 4Runner | Navigation Manual - Page 218
situations, your voice may not reach the other party. D Driving on unpaved road. (Making a traffic noise.) D Driving at the high speed. D The window is open. D Turning the air−conditioning vents towards the microphone. D The sound of the air−conditioning fan is loud. D There is an effect from the - 2012 Toyota 4Runner | Navigation Manual - Page 219
- 2012 Toyota 4Runner | Navigation Manual - Page 220
area or in a place inaccessible by radio waves, "No Service" is displayed. An antenna for the Bluetoothr connection is built in the display. The indication of the Bluetoothr connection may turn yellow and the system may not function when you use the Bluetoothr phone in the following conditions - 2012 Toyota 4Runner | Navigation Manual - Page 221
- 2012 Toyota 4Runner | Navigation Manual - Page 222
personal data is registered when you use the Hands−free system. When you release your car, initialize your data. U.S.A. FCC ID : HYQDNNS025 Type : DNNS025 This device complies with part 15 of the FCC Rules and more between the radiator and person's body (excluding extremities: hands, wrists, feet and - 2012 Toyota 4Runner | Navigation Manual - Page 223
- 2012 Toyota 4Runner | Navigation Manual - Page 224
TELEPHONE AND INFORMATION D For vehicles sold in Canada IC : 1551A−DNNS025 Type : DNNS025 CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non contrôlé et est conforme avec les directives - 2012 Toyota 4Runner | Navigation Manual - Page 225
- 2012 Toyota 4Runner | Navigation Manual - Page 226
- Enter a Bluetoothr phone To use the hands−free system, you need to enter your phone into the system. Once you have registered it, you can make a phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". 2. Touch " - 2012 Toyota 4Runner | Navigation Manual - Page 227
- 2012 Toyota 4Runner | Navigation Manual - Page 228
D Connecting a Bluetoothr phone AUTOMATICALLY 5. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetoothr phone - 2012 Toyota 4Runner | Navigation Manual - Page 229
- 2012 Toyota 4Runner | Navigation Manual - Page 230
off, you have to connect Bluetoothr manually. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, a nearby cellular phone you have registered is searched for. Next, the system automatically connects with the latest of the - 2012 Toyota 4Runner | Navigation Manual - Page 231
- 2012 Toyota 4Runner | Navigation Manual - Page 232
TELEPHONE AND INFORMATION When you connect the phone while Bluetoothr audio is playing 5. The "Connect Bluetooth∗" screen is displayed. This screen is displayed, and the Bluetoothr audio will stop temporarily. 6. When the connection is completed, this screen is displayed. Now you - 2012 Toyota 4Runner | Navigation Manual - Page 233
- 2012 Toyota 4Runner | Navigation Manual - Page 234
phone If the Bluetoothr phone is disconnected with a poor reception from the Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the Bluetoothr phone. In this case, the connection result is not displayed. If the Bluetoothr - 2012 Toyota 4Runner | Navigation Manual - Page 235
- 2012 Toyota 4Runner | Navigation Manual - Page 236
can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in total of phonebooks. This cannot be operated while driving. 3. Touch the desired key to input the phone number. , an inputted Each time - 2012 Toyota 4Runner | Navigation Manual - Page 237
- 2012 Toyota 4Runner | Navigation Manual - Page 238
TELEPHONE AND INFORMATION When the phonebook is empty 3. Select the desired number from the list. Touch wheel. or push of the steering 1. Touch "Contacts". 2. Touch "Yes" if you want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 132 - 2012 Toyota 4Runner | Navigation Manual - Page 239
- 2012 Toyota 4Runner | Navigation Manual - Page 240
which you called You can call using the latest 5 call history items shown by "All" while driving. 1. Touch "Speed Dials". 1. Touch "Call History". 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 2. Select the desired data from the - 2012 Toyota 4Runner | Navigation Manual - Page 241
- 2012 Toyota 4Runner | Navigation Manual - Page 242
wheel to display the "Phone" screen. 2. Push of the steering wheel to display the "Call History" screen. 3. Push of the steering wheel to select the latest history item. 3. Touch steering wheel calls are also memorized in the system. D A international phone call may not be made depending on - 2012 Toyota 4Runner | Navigation Manual - Page 243
- 2012 Toyota 4Runner | Navigation Manual - Page 244
data" on page 243. You can call by giving a command. (For the operation and command of voice recognition, see "Speech command system -" on page 44.) This can be operated while driving. The "Dial by Name" operating procedure is explained here. Other operating procedures are also similar. 135 - 2012 Toyota 4Runner | Navigation Manual - Page 245
- 2012 Toyota 4Runner | Navigation Manual - Page 246
the talk switch. of the steering wheel. D Push D Touch "Cancel". (Except for recogniz- You: System: Push the talk switch. "After the You: "Dial by Name." System: "Dial by Name." "Say a name from your contact list." "(beep)" You: "MIKE." System: "MIKE." "Say the type of number." "Such as "Mobile - 2012 Toyota 4Runner | Navigation Manual - Page 247
- 2012 Toyota 4Runner | Navigation Manual - Page 248
on the Bluetooth r phone D By POI* call You can call by touching when it is displayed on the screen from navigation system. (See "POI INFORMATION" on page 36 for details.) *: Point of Interest When a call is received, this screen is displayed with a sound. Touch or push of the steering wheel to - 2012 Toyota 4Runner | Navigation Manual - Page 249
- 2012 Toyota 4Runner | Navigation Manual - Page 250
up the phone: Touch or push of the steering wheel. To mute your voice: Touch "Mute". To input a Key: Touch "0−9". To transfer the call: Touch "Call Transfer". You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to Hands−free call, the - 2012 Toyota 4Runner | Navigation Manual - Page 251
- 2012 Toyota 4Runner | Navigation Manual - Page 252
appears. To hang up the phone: Touch or push of the steering wheel. The continuous tone signal is the marked sign (p or w) and operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the system" on page 44.) 139 - 2012 Toyota 4Runner | Navigation Manual - Page 253
- 2012 Toyota 4Runner | Navigation Manual - Page 254
AND INFORMATION D Interrupt call When the call is interrupted by the third party while talking, this screen is displayed. Touch or push of the steering wheel to start talking with the other party. Touch or push wheel to refuse the call. of the steering Everytime you touch or push of the steering - 2012 Toyota 4Runner | Navigation Manual - Page 255
- 2012 Toyota 4Runner | Navigation Manual - Page 256
consumption history is divided by color into past averages and the average fuel consumption since the last reset. Reset the average fuel consumption to measure the current fuel consumption again. For more information on resetting fuel consumption, see the vehicle owner's manual. Past record data can - 2012 Toyota 4Runner | Navigation Manual - Page 257
- 2012 Toyota 4Runner | Navigation Manual - Page 258
". "Consumption" screen will be displayed. 1 Fuel consumption in the past 30 minutes 2 Cruising range Average fuel consumption is divided by color into past averages and averages attained since the "ENGINE START STOP" switch was last turned to IGNITION ON mode. Consumption data can be deleted by - 2012 Toyota 4Runner | Navigation Manual - Page 259
- 2012 Toyota 4Runner | Navigation Manual - Page 260
AND INFORMATION Calendar To view calendar. 1. Push the "INFO·PHONE" button. 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month will be displayed). 143 - 2012 Toyota 4Runner | Navigation Manual - Page 261
- 2012 Toyota 4Runner | Navigation Manual - Page 262
TELEPHONE AND INFORMATION 144 - 2012 Toyota 4Runner | Navigation Manual - Page 263
- 2012 Toyota 4Runner | Navigation Manual - Page 264
6 147 154 159 165 177 186 194 D Quick reference ...146 D Using your audio system ...147 Some basics ...Radio operation ...Radio operation (XMr Satellite Radio broadcast) ...CD changer operation ...Bluetoothr audio operation ...USB memory/iPod operation ...D Audio remote controls (steering - 2012 Toyota 4Runner | Navigation Manual - Page 265
- 2012 Toyota 4Runner | Navigation Manual - Page 266
AUDIO SYSTEM Quick reference Operations such as selecting a preset station and adjusting the sound balance are carried out on the touch screen. To display the audio screen, - 2012 Toyota 4Runner | Navigation Manual - Page 267
- 2012 Toyota 4Runner | Navigation Manual - Page 268
of the basic features of your audio system. Some information may not pertain to your system. Your audio system works when the "ENGINE START STOP" switch is turned to ACCESSORY or IGNITION ON mode. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or - 2012 Toyota 4Runner | Navigation Manual - Page 269
- 2012 Toyota 4Runner | Navigation Manual - Page 270
the switch above, you can operate the speech command system. For the operation of the speech command system and the list of commands, see pages 44 and 47. NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. 148 - 2012 Toyota 4Runner | Navigation Manual - Page 271
- 2012 Toyota 4Runner | Navigation Manual - Page 272
display touch−screen buttons for audio system (audio control mode). "POWER/VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. You can select the function that enables automatic return to the previous screen from - 2012 Toyota 4Runner | Navigation Manual - Page 273
- 2012 Toyota 4Runner | Navigation Manual - Page 274
if you want to switch from one mode to another. If the disc is not set, the CD changer does not turn on. You can turn off the CD changer by ejecting all the discs. If the audio system was previously off, then the entire audio system will be turned off when you - 2012 Toyota 4Runner | Navigation Manual - Page 275
- 2012 Toyota 4Runner | Navigation Manual - Page 276
button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. Touch the tab to select the desired mode when the audio control mode is selected. The selected switch is highlighted. INFORMATION D If the system does not respond to a touch of a touch - 2012 Toyota 4Runner | Navigation Manual - Page 277
- 2012 Toyota 4Runner | Navigation Manual - Page 278
to a stereo recording or broadcast, changing the right/left balance will increase the Automatic Sound levelizer". 5. Touch "OK". Automatic sound levelizer (ASL): When the audio sound becomes difficult to hear due to road noise, wind noise or other noises while driving, select "On". The system - 2012 Toyota 4Runner | Navigation Manual - Page 279
- 2012 Toyota 4Runner | Navigation Manual - Page 280
Front" or "Rear": Adjusts sound balance between the front and rear speakers. "L" or "R": Adjusts sound balance between the left and right speakers. 3. Touch "OK". The tone of each mode at a time. D Never try to disassemble or oil any part of the changer. Do not insert anything other than a disc into - 2012 Toyota 4Runner | Navigation Manual - Page 281
- 2012 Toyota 4Runner | Navigation Manual - Page 282
mode. When the portable audio player is not connected to the AUX port, the tab will tone down. For details, refer to the "Owner's Manual". (h) USB port It is available the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "SAT" button or touch the "SAT" - 2012 Toyota 4Runner | Navigation Manual - Page 283
- 2012 Toyota 4Runner | Navigation Manual - Page 284
automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to prevent the weak signal from creating noise radio mode (AM, FM1 or FM2) can store up to 6 stations. To change - 2012 Toyota 4Runner | Navigation Manual - Page 285
- 2012 Toyota 4Runner | Navigation Manual - Page 286
automatically mode provides you to receive text messages from radio stations that utilize RDS transmitters. When RDS is on, the radio can - only select stations of a particular program type, - display messages from radio stations, - search for a stronger signal station. RDS features are available - 2012 Toyota 4Runner | Navigation Manual - Page 287
- 2012 Toyota 4Runner | Navigation Manual - Page 288
AUDIO SYSTEM "Type A "" If the system receives no RDS stations, "NO−PTY" appears on the display. Each time you touch "A Type " or "Type "", the program type changes as in the following: D ROCK D MISC (Miscellaneous) D INFORM (Information) D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and - 2012 Toyota 4Runner | Navigation Manual - Page 289
- 2012 Toyota 4Runner | Navigation Manual - Page 290
a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "Message Off", the display returns. "Traffic" A station that regularly broadcasts traffic information is automatically located. When you touch "Traffic", "Traf. Seek" appears on - 2012 Toyota 4Runner | Navigation Manual - Page 291
- 2012 Toyota 4Runner | Navigation Manual - Page 292
of the XMr Satellite Radio and are subject to change. Satellite tuner technology notice: Toyota's satellite radio tuners are awarded Type Approval Certificates from XMr Satellite Radio Inc. as proof of compatibility with the services offered by the XMr Satellite Radio. (b) Displaying the radio - 2012 Toyota 4Runner | Navigation Manual - Page 293
- 2012 Toyota 4Runner | Navigation Manual - Page 294
AUDIO SYSTEM (c) Listening to satellite radio (d) Channel category Touch either "A Type" or "Type "" to go to the next or previous category. Push the "SAT" button or push the "AUDIO" button to display audio screen and touch the "SAT" - 2012 Toyota 4Runner | Navigation Manual - Page 295
- 2012 Toyota 4Runner | Navigation Manual - Page 296
AUDIO SYSTEM (e) Presetting a channel 1. Tune in the desired channel. 2. Touch one of the channel appears on the touch− screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is - 2012 Toyota 4Runner | Navigation Manual - Page 297
- 2012 Toyota 4Runner | Navigation Manual - Page 298
AUDIO SYSTEM (g) Displaying the title and name When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "Text" again, the display returns. 162 - 2012 Toyota 4Runner | Navigation Manual - Page 299
- 2012 Toyota 4Runner | Navigation Manual - Page 300
longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or NO SIGNAL LOADING OFF AIR CH UNAVL Contact the XMr Listener 1−877−438−9677 (Canada). 163 - 2012 Toyota 4Runner | Navigation Manual - Page 301
- 2012 Toyota 4Runner | Navigation Manual - Page 302
SYSTEM NOTICE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part -Reorient or relocate the receiving antenna. -Increase the separation between the . -Consult the dealer or an experienced radio XMr tuner supports "Audio Services" (Music - 2012 Toyota 4Runner | Navigation Manual - Page 303
- 2012 Toyota 4Runner | Navigation Manual - Page 304
AUDIO SYSTEM - CD changer operation (a) Inserting discs The "ENGINE START STOP" switch must be in ACCESSORY or IGNITION ON mode. Your CD changer can indicators change to green, you can insert the next disc. 4. Push the "LOAD· /CLOSE" button to close the display. The changer will automatically start - 2012 Toyota 4Runner | Navigation Manual - Page 305
- 2012 Toyota 4Runner | Navigation Manual - Page 306
the vehicle during sudden braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display is ejected, the amber indicators change to green. A disc can be inserted. INFORMATION Under extremely cold conditions, the display may react - 2012 Toyota 4Runner | Navigation Manual - Page 307
- 2012 Toyota 4Runner | Navigation Manual - Page 308
SYSTEM D All the discs: 3. Remove the disc. The indicators start blinking again and the next disc is ejected. If a disc is not removed within 15 seconds after it is ejected, the operation will be canceled. When all the discs are removed, the amber indicators change map DVD−ROM will be ejected. 167 - 2012 Toyota 4Runner | Navigation Manual - Page 309
- 2012 Toyota 4Runner | Navigation Manual - Page 310
AUDIO SYSTEM (c) Playing a disc (d) Selecting a desired disc U6021GS Touch "Change Discs" on "CD" screen and touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the - 2012 Toyota 4Runner | Navigation Manual - Page 311
- 2012 Toyota 4Runner | Navigation Manual - Page 312
AUDIO SYSTEM (e) Playing an audio disc Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an audio disc number to display this selected from a list. This function is available only when the vehicle is not moving. Touch "Select". The track list is displayed. 169 - 2012 Toyota 4Runner | Navigation Manual - Page 313
- 2012 Toyota 4Runner | Navigation Manual - Page 314
AUDIO SYSTEM Touch the desired track number. The changer will start playing the selected track from the beginning. : By touching this touch−screen button, the list moves - 2012 Toyota 4Runner | Navigation Manual - Page 315
- 2012 Toyota 4Runner | Navigation Manual - Page 316
again. To cancel it, touch "RPT" once again. "RAND": Use it for automatic and random selection. Playing the tracks on one disc in random order - Touch "RAND" briefly while the disc is playing. "RAND" appears on the screen. The system selects a track on the disc being listened to in random order. To - 2012 Toyota 4Runner | Navigation Manual - Page 317
- 2012 Toyota 4Runner | Navigation Manual - Page 318
: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an MP3/WMA disc number to display this screen. U6026GS - 2012 Toyota 4Runner | Navigation Manual - Page 319
- 2012 Toyota 4Runner | Navigation Manual - Page 320
AUDIO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until - 2012 Toyota 4Runner | Navigation Manual - Page 321
- 2012 Toyota 4Runner | Navigation Manual - Page 322
AUDIO SYSTEM U6027GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. Touch the desired file number. The changer will start playing the - 2012 Toyota 4Runner | Navigation Manual - Page 323
- 2012 Toyota 4Runner | Navigation Manual - Page 324
AUDIO SYSTEM SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on the screen. The changer will play the - 2012 Toyota 4Runner | Navigation Manual - Page 325
- 2012 Toyota 4Runner | Navigation Manual - Page 326
AUDIO SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - Touch "RPT" briefly while the file is playing. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the beginning of - 2012 Toyota 4Runner | Navigation Manual - Page 327
- 2012 Toyota 4Runner | Navigation Manual - Page 328
disc cannot be read or the system has trouble. Push the "CD" button once have it checked by your dealer. If an MP3/WMA system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication. This audio system supports Bluetoothr, a wireless data system - 2012 Toyota 4Runner | Navigation Manual - Page 329
- 2012 Toyota 4Runner | Navigation Manual - Page 330
higher) Please go to "http://www.toyota. letstalk.com/" to find approved Bluetoothr phones for this system. Bluetooth is a trademark owned by Bluetooth SIG. Inc. CAUTION Do not operate the player's controls or connect to the Bluetoothr audio system while driving. NOTICE Do not leave your portable - 2012 Toyota 4Runner | Navigation Manual - Page 331
- 2012 Toyota 4Runner | Navigation Manual - Page 332
to Bluetoothr. 2 Indicates the amount of battery charge left. An antenna for the Bluetoothr connection is built in to the display. The indication of the Bluetoothr connection may turn yellow and the system may not function when you use the Bluetoothr portable player in the - 2012 Toyota 4Runner | Navigation Manual - Page 333
- 2012 Toyota 4Runner | Navigation Manual - Page 334
SYSTEM D For vehicles sold in U.S.A. FCC ID : HYQDNNS025 Type : DNNS025 D For vehicles sold in Canada IC : 1551A −DNNS025 Type : DNNS025 This device complies with part the radiator and person's body (excluding extremities: hands, conjunction with any other antenna or transmitter. Operation - 2012 Toyota 4Runner | Navigation Manual - Page 335
- 2012 Toyota 4Runner | Navigation Manual - Page 336
AUDIO SYSTEM CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non contrôlé et est conforme avec les directives sur - 2012 Toyota 4Runner | Navigation Manual - Page 337
- 2012 Toyota 4Runner | Navigation Manual - Page 338
method is "From Portable Player" Operate the portable player and connect it to the Bluetoothr audio system. For the operation procedure for the portable player, see the instruction manual that comes with it. Touch "Connect". U6033GS Touch "Connect". When the connection is completed, this screen - 2012 Toyota 4Runner | Navigation Manual - Page 339
- 2012 Toyota 4Runner | Navigation Manual - Page 340
player If the portable player is disconnected with a poor reception from the Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the portable player. In this case, the connection result is not displayed. If the Bluetoothr - 2012 Toyota 4Runner | Navigation Manual - Page 341
- 2012 Toyota 4Runner | Navigation Manual - Page 342
AUDIO SYSTEM D Selecting a desired track Some titles may not be displayed depending on the type of portable player. "SEEK/TRACK" button: Use for direct access to a playing. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. 184 - 2012 Toyota 4Runner | Navigation Manual - Page 343
- 2012 Toyota 4Runner | Navigation Manual - Page 344
button to go to the previous album. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. "RPT": Use this control to automatic replay the track you are currently listening to. Repeating a track- While the track is playing, touch "RPT - 2012 Toyota 4Runner | Navigation Manual - Page 345
- 2012 Toyota 4Runner | Navigation Manual - Page 346
/iPod operation "RAND": Use this for automatic and random selection of tracks on the album that you are currently listening to. Playing the tracks in the album in random order- While the track is playing, touch "RAND" briefly. "RAND" appears on the screen. The system selects a track in the album you - 2012 Toyota 4Runner | Navigation Manual - Page 347
- 2012 Toyota 4Runner | Navigation Manual - Page 348
AUDIO SYSTEM (a) Connecting a USB memory or iPod (b) Playing a USB memory or iPod D Playing and pausing a file or track " USB memory 1. Open the glove box. " iPod Touch "USB" - 2012 Toyota 4Runner | Navigation Manual - Page 349
- 2012 Toyota 4Runner | Navigation Manual - Page 350
AUDIO SYSTEM D Selecting a play mode (iPod only) INFORMATION D When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. D When the USB memory is connected and the audio source is changed to USB memory mode, the - 2012 Toyota 4Runner | Navigation Manual - Page 351
- 2012 Toyota 4Runner | Navigation Manual - Page 352
AUDIO SYSTEM D Selecting a desired folder (USB memory only) : By touching this touch− previous folder. "Select" for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. Touch the desired - 2012 Toyota 4Runner | Navigation Manual - Page 353
- 2012 Toyota 4Runner | Navigation Manual - Page 354
AUDIO SYSTEM D Selecting a desired file or track "SEEK/TRACK" button: Use for direct access to a desired file or track. Push either side of the "SEEK/TRACK" button - 2012 Toyota 4Runner | Navigation Manual - Page 355
- 2012 Toyota 4Runner | Navigation Manual - Page 356
AUDIO SYSTEM " USB memory Touch the desired file or track number. The changer iPod "Select" for file or track: The desired file or track can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file or track list is displayed. ton, the list - 2012 Toyota 4Runner | Navigation Manual - Page 357
- 2012 Toyota 4Runner | Navigation Manual - Page 358
AUDIO SYSTEM D Searching for a desired file (USB memory only) D Searching for a desired folder (USB memory only) Touch "SCAN" on the screen briefly while the music is playing. " - 2012 Toyota 4Runner | Navigation Manual - Page 359
- 2012 Toyota 4Runner | Navigation Manual - Page 360
AUDIO SYSTEM D Other function " USB memory " iPod "RPT": Use this control to automatic replay the file or track . "RPT" appears on the screen. When the file or track is finished, the player will automatically play it again. To cancel the repeat, select "RPT" once again. Repeating a folder (USB - 2012 Toyota 4Runner | Navigation Manual - Page 361
- 2012 Toyota 4Runner | Navigation Manual - Page 362
reach the disc you want to listen to. Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume control switch 2 "ƜƝ" switch 3 "MODE" switch Volume control switch Push "+" side to - 2012 Toyota 4Runner | Navigation Manual - Page 363
- 2012 Toyota 4Runner | Navigation Manual - Page 364
want to listen to. 3 "MODE" switch Push "MODE" switch to select an audio mode. Each push changes the mode sequentially if the desired mode is ready to use. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch until you hear - 2012 Toyota 4Runner | Navigation Manual - Page 365
- 2012 Toyota 4Runner | Navigation Manual - Page 366
making it possible for two signals to reach your antenna at the same time. If this happens, the noise, such as high tension power lines, lightening, or electrical motors. This results in static. XMr Cargo this system. iPod 4th generation and earlier models are not compatible with this system. iPhone - 2012 Toyota 4Runner | Navigation Manual - Page 367
- 2012 Toyota 4Runner | Navigation Manual - Page 368
AUDIO SYSTEM USB memory USB memory that can be used for MP3 and WMA playback. discs only. D Extremely high temperatures can keep your CD changer from working. On hot days, use the air conditioning to cool the vehicle interior before you use the changer. D Bumpy roads or other vibrations may make - 2012 Toyota 4Runner | Navigation Manual - Page 369
- 2012 Toyota 4Runner | Navigation Manual - Page 370
discs may damage the changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may time, the audio disc and the map DVD− ROM will be ejected. 6U5B95X " Transparent/translucent discs 6U5B94X " Low quality discs 198 - 2012 Toyota 4Runner | Navigation Manual - Page 371
- 2012 Toyota 4Runner | Navigation Manual - Page 372
AUDIO SYSTEM 6U5B97X 6U5B98X " Correct " Wrong D Handle discs carefully, especially when you are skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from - 2012 Toyota 4Runner | Navigation Manual - Page 373
- 2012 Toyota 4Runner | Navigation Manual - Page 374
level 2 and with the Romeo and Joliet file system. D When naming an MP3 or WMA file, add extensions as MP3 or WMA files. To prevent noise and playback errors, use the appropriate file extensions. title, artist name. D The emphasis function is available only when playing MP3/WMA files recorded at 32 - 2012 Toyota 4Runner | Navigation Manual - Page 375
- 2012 Toyota 4Runner | Navigation Manual - Page 376
AUDIO SYSTEM D M3u playlists are not compatible with D D D the audio player. MP3i (MP3 interactive) and MP3PRO formats are not possible to play up to 999 folders, 255 files per folder or 65,025 files in device. D The order changes depending on the PC and MP3/WMA encoding software you use. 201 - 2012 Toyota 4Runner | Navigation Manual - Page 377
- 2012 Toyota 4Runner | Navigation Manual - Page 378
AUDIO SYSTEM CD−R and CD−RW discs D CD−R/CD−RW discs that have not been conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot be played using the DDCD (Double Density CD) system. TERMS Packet write- This is a general term that describes the process of writing data on−demand to CD−R, etc - 2012 Toyota 4Runner | Navigation Manual - Page 379
- 2012 Toyota 4Runner | Navigation Manual - Page 380
AUDIO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the - 2012 Toyota 4Runner | Navigation Manual - Page 381
- 2012 Toyota 4Runner | Navigation Manual - Page 382
AUDIO SYSTEM 204 - 2012 Toyota 4Runner | Navigation Manual - Page 383
- 2012 Toyota 4Runner | Navigation Manual - Page 384
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM 7 D Rear view monitor system ...206 205 - 2012 Toyota 4Runner | Navigation Manual - Page 385
- 2012 Toyota 4Runner | Navigation Manual - Page 386
place the shift lever in the "R" position when the "ENGINE START STOP" switch is in IGNITION ON mode. If you move the shift lever out of the around the vehicle visually. CAUTION D Never depend on the rear view monitor system entirely when backing up. Always make sure your intended path is clear. - 2012 Toyota 4Runner | Navigation Manual - Page 387
- 2012 Toyota 4Runner | Navigation Manual - Page 388
angle checked at your Toyota dealer. As the camera has a water proof construction, do not detach, disassemble or modify it. This may cause incorrect operation. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally - 2012 Toyota 4Runner | Navigation Manual - Page 389
- 2012 Toyota 4Runner | Navigation Manual - Page 390
REAR VIEW MONITOR SYSTEM D Area displayed on screen Image is displayed approximately level on screen. The area displayed on the screen may vary according to vehicle orientation or road conditions. Corners of bumper The area detected by the camera is limited. The camera does not detect objects - 2012 Toyota 4Runner | Navigation Manual - Page 391
- 2012 Toyota 4Runner | Navigation Manual - Page 392
it may become difficult to see the images on the screen, even when the system is functioning. D In the dark (for example, at night) D When sun or the beam of headlights is shining directly into the camera lens If a bright light (for example, sunlight reflected off the vehicle body) is picked up by - 2012 Toyota 4Runner | Navigation Manual - Page 393
- 2012 Toyota 4Runner | Navigation Manual - Page 394
REAR VIEW MONITOR SYSTEM 210 - 2012 Toyota 4Runner | Navigation Manual - Page 395
- 2012 Toyota 4Runner | Navigation Manual - Page 396
the on/off settings of operation sounds and automatic screen change.) D Clock settings ...217 (Used for changing time zones and the on/off settings of phones can be registered.) D Audio settings ...268 (Settings are available for portable audio devices and Bluetoothr audio devices players.) D Vehicle - 2012 Toyota 4Runner | Navigation Manual - Page 397
- 2012 Toyota 4Runner | Navigation Manual - Page 398
the audio screen to the map. When "On" is selected, the screen will automatically return to the map from the audio screen after 20 seconds. Line color can be changed. (See "D Selecting the line color" on page 214.) 2. Touch "General". 2 3 3. Touch the items to be set. 4. Touch "Save". 4 212 - 2012 Toyota 4Runner | Navigation Manual - Page 399
- 2012 Toyota 4Runner | Navigation Manual - Page 400
measurement" on page 215.) The personal data can be deleted. (See "D Delete personal data" on page 216.) D Selecting a language You can change the language. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 6 7 3. Touch "Language". 4. Touch the desired button. The previous - 2012 Toyota 4Runner | Navigation Manual - Page 401
- 2012 Toyota 4Runner | Navigation Manual - Page 402
on the "Setup" screen. D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 3. Touch "Line Color". 3. Touch "Keyboard Layout". 4. Touch the desired color. 4. Touch "ABC" or "QWERTY" of "Keyboard Layout" to choose the - 2012 Toyota 4Runner | Navigation Manual - Page 403
- 2012 Toyota 4Runner | Navigation Manual - Page 404
be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the "General Settings" screen. " "ABC" type 3. Touch "Unit of Measurement". " "QWERTY" type 4. Select "Kilometer" or "Mile". 5. Touch "Save". INFORMATION This function is available - 2012 Toyota 4Runner | Navigation Manual - Page 405
- 2012 Toyota 4Runner | Navigation Manual - Page 406
trace D Phonebook data D Call history data D Speed dial data D Voice tag data D Bluetoothr phone data D Volume setting D Details setting This function is available only when the vehicle is not moving. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page - 2012 Toyota 4Runner | Navigation Manual - Page 407
- 2012 Toyota 4Runner | Navigation Manual - Page 408
time. SCREEN FOR CLOCK SETTINGS On this screen, the following functions can be performed. No. 1. Push the "SETUP" button. 1 2 Function Time zone can be changed. (See "D Time zone" on page 218.) "On" or "Off" can be selected for daylight savings time. 2. Touch "Clock". 3. Touch the items to be - 2012 Toyota 4Runner | Navigation Manual - Page 409
- 2012 Toyota 4Runner | Navigation Manual - Page 410
guidance can be set. 1. Push the "SETUP" button. 3. Touch "Time Zone". 2. Touch "Voice". 4. Touch the desired time zone. If you touch "Other", adjust the zone manually. 3. Touch the items to be set. 4. Touch "Save". 5. Touch "OK". 218 - 2012 Toyota 4Runner | Navigation Manual - Page 411
- 2012 Toyota 4Runner | Navigation Manual - Page 412
number. If voice guidance is not needed, touch "Off" to disable the feature. On this screen, the following functions can be performed. No. 1 Function route guidance can be set to "On" or "Off". Voice guidance during audio system use can be set to "On" or "Off". Voice recognition talkback can be set - 2012 Toyota 4Runner | Navigation Manual - Page 413
- 2012 Toyota 4Runner | Navigation Manual - Page 414
guidance You can receive congestion information through voice guidance while being guided to your destination. To turn the "Traffic Voice Guidance" on Voice Guidance". 4. Touch "Save". 4 5 INFORMATION D This function is available only in English. To select English, see "D Selecting a language" on - 2012 Toyota 4Runner | Navigation Manual - Page 415
- 2012 Toyota 4Runner | Navigation Manual - Page 416
SETUP Detailed navigation settings Average cruising speed, displayed screen contents, and POI icon categories can be set. 4. Touch the items to be set. 5. Touch "Save". 1. Push the "SETUP" button. 2. Touch "Navi.". 3. Touch "Detailed Navi. Settings". 221 - 2012 Toyota 4Runner | Navigation Manual - Page 417
- 2012 Toyota 4Runner | Navigation Manual - Page 418
adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See "D Current position/ tire change calibration" . 1 Function Average cruising speed can be set. (See "D Driving speeds" on page 223.) The automatic input function can be set to "On" or "Off". During - 2012 Toyota 4Runner | Navigation Manual - Page 419
- 2012 Toyota 4Runner | Navigation Manual - Page 420
the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the guidance route. D The time shown on the - 2012 Toyota 4Runner | Navigation Manual - Page 421
- 2012 Toyota 4Runner | Navigation Manual - Page 422
SETUP D Auto avoid traffic The guidance route automatically changes to another route to avoid heavy congestion. To turn the "Auto Avoid Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch " - 2012 Toyota 4Runner | Navigation Manual - Page 423
- 2012 Toyota 4Runner | Navigation Manual - Page 424
" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. D POI category change (Select POI icons) Select from among the 6 icons displayed on the "Customize POI Icons" screen, so that setting of the icons to be - 2012 Toyota 4Runner | Navigation Manual - Page 425
- 2012 Toyota 4Runner | Navigation Manual - Page 426
SETUP D Screen layout function ("AAOff" function) Each touch screen button and current street name on the map screen can be displayed or hidden. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to - 2012 Toyota 4Runner | Navigation Manual - Page 427
- 2012 Toyota 4Runner | Navigation Manual - Page 428
/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually - 2012 Toyota 4Runner | Navigation Manual - Page 429
- 2012 Toyota 4Runner | Navigation Manual - Page 430
current vehicle position mark. 5. Touch "OK". The map will be displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map will be displayed. 228 - 2012 Toyota 4Runner | Navigation Manual - Page 431
- 2012 Toyota 4Runner | Navigation Manual - Page 432
Pop−up Information" is turned off, the following messages will not be displayed. "Detailed Navi. Settings" screen. This message appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 4. Touch "Pop−up Information". The message appears when the map is switched to the - 2012 Toyota 4Runner | Navigation Manual - Page 433
- 2012 Toyota 4Runner | Navigation Manual - Page 434
1. Touch "Volume". 1. Push the "SETUP" button. 2. Touch "Phone". 2. Change each setting according to the following procedures. 3. When you complete all settings, touch "Save". Automatic volume settings for high speed The system will automatically increase the volume by one step up when the speed - 2012 Toyota 4Runner | Navigation Manual - Page 435
- 2012 Toyota 4Runner | Navigation Manual - Page 436
SETUP D Voice volume setting 1. Touch "Voice Volume". D Initializing the settings You can initialize the settings. 1. Touch "Default". 2. Touch "-" or "+" to adjust the voice volume. 3. Touch "OK". 2. Touch "Yes". D Ring volume setting 1. Touch "Ring Volume". 2. Touch "-" or "+" to adjust the - 2012 Toyota 4Runner | Navigation Manual - Page 437
- 2012 Toyota 4Runner | Navigation Manual - Page 438
Registering a Bluetoothr phone 1. Touch "(add new)" to register your cellular phone to the system. 3. Touch "Manage Phone". Please refer to the following pages for each setting. of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". - 2012 Toyota 4Runner | Navigation Manual - Page 439
- 2012 Toyota 4Runner | Navigation Manual - Page 440
displayed. If you want to disconnect it, touch "Yes". INFORMATION When you register your phone, Bluetoothr audio will disconnect. It will reconnect automatically when you finish registration. It will not be reconnected depending on the phone you are using. When this screen is displayed, follow the - 2012 Toyota 4Runner | Navigation Manual - Page 441
- 2012 Toyota 4Runner | Navigation Manual - Page 442
a new Bluetoothr phone in the following way. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Manage Phone". 6. Touch "(empty)" to register your cellular phone to the system. The following operations are the same as the operation after you touch "(add new)". 4. Touch - 2012 Toyota 4Runner | Navigation Manual - Page 443
- 2012 Toyota 4Runner | Navigation Manual - Page 444
you have not registered a Bluetoothr phone yet. Although you can register up to 4 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 2. The "Connect Bluetooth∗" screen is displayed. 1. Select the phone to connect. The Bluetoothr mark is displayed when you connect - 2012 Toyota 4Runner | Navigation Manual - Page 445
- 2012 Toyota 4Runner | Navigation Manual - Page 446
the Bluetoothr audio will stop temporarily. When another Bluetoothr device is connected The state changes between "On" and "Off" every time you touch "Handsfree Power". For the "Handsfree Power", see "Changing the handsfree power" on page 262. When another Bluetoothr device is currently connected - 2012 Toyota 4Runner | Navigation Manual - Page 447
- 2012 Toyota 4Runner | Navigation Manual - Page 448
to the system. You cannot change it. If you have registered two Bluetoothr phones with the same device name and you cannot distinguish one from the other, refer to it. 3. Select the phone to edit. 4. This screen is displayed. If you want to change the device name, touch "Edit". 1. Touch "Options - 2012 Toyota 4Runner | Navigation Manual - Page 449
- 2012 Toyota 4Runner | Navigation Manual - Page 450
SETUP D Deleting a Bluetoothr phone 5. Use the software keyboard to input the device name. 1. Touch "Options". 6. Confirm the device name and touch "OK". 2. Touch "Remove Phones". 238 - 2012 Toyota 4Runner | Navigation Manual - Page 451
- 2012 Toyota 4Runner | Navigation Manual - Page 452
" and "Handsfree Power Off" (On). The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see "Speech command system -" on page 44.) When you select the command of "Add New Phone", you must carry out the following operation on the screen. 4. Touch - 2012 Toyota 4Runner | Navigation Manual - Page 453
- 2012 Toyota 4Runner | Navigation Manual - Page 454
SETUP - Phonebook INFORMATION Phonebook data is managed for every registered phone. When another phone is connecting, you can not read the registered data. "Phonebook" is accessed from the "Phonebook Settings" screen. 1. Push the "SETUP" button. 2. Touch "Phone". - Setting the phonebook "Setting - 2012 Toyota 4Runner | Navigation Manual - Page 455
- 2012 Toyota 4Runner | Navigation Manual - Page 456
system. The phonebook manages a maximum of 4 phonebooks in all. Up to 1000 person's data (up to 3 numbers a person) can be registered in total of phonebooks. Transfer it while the engine is running. 4. Touch "Options". 1. Touch "Transfer Contacts". 5. Touch "Manage Contacts". 2. Touch "Replace - 2012 Toyota 4Runner | Navigation Manual - Page 457
- 2012 Toyota 4Runner | Navigation Manual - Page 458
phonebook data transferred until then can be memorized in the system. When you have touched "Replace Contacts": If your cellular phone does not support PBAP or OPP service, you can not use this function. If your phone supports PBAP service, you can transfer the phonebook data without operating your - 2012 Toyota 4Runner | Navigation Manual - Page 459
- 2012 Toyota 4Runner | Navigation Manual - Page 460
touch "Yes". 1. Touch "New Contact". INFORMATION Bluetoothr audio will disconnect during transfer on phonebook data. In this case, it will reconnect automatically when data transfer finishes. (It will not be reconnected depending the phone you are using.) 2. Use the software keyboard to input the - 2012 Toyota 4Runner | Navigation Manual - Page 461
- 2012 Toyota 4Runner | Navigation Manual - Page 462
in total are registered to this contact, this screen is displayed. When you want to add a number to this contact, touch "Yes". 4. Select the phone type. 244 - 2012 Toyota 4Runner | Navigation Manual - Page 463
- 2012 Toyota 4Runner | Navigation Manual - Page 464
SETUP D Editing the phonebook data You can register the phone number in "Phone#1", "Phone#2" and "Phone#3" separately. 1. Touch "Edit Contacts". 3. Touch "Edit" for the desired name or number. 4. Edit the name or the number. (See "D Registering the phonebook data" on page 243.) 5. When you - 2012 Toyota 4Runner | Navigation Manual - Page 465
- 2012 Toyota 4Runner | Navigation Manual - Page 466
" button. 2. Touch "Phone". 3. Touch "Call History". 4. Select the desired number from the list. 5. Touch "Add Contact" or "Update Contact". 5. Touch "Options". 6. Touch "Edit Contact". 6. In case that you have touched "Update Contact", this screen is displayed. Select the desired data from the - 2012 Toyota 4Runner | Navigation Manual - Page 467
- 2012 Toyota 4Runner | Navigation Manual - Page 468
SETUP D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 3. Touch "Yes". 1. Touch "Delete Contacts". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at - 2012 Toyota 4Runner | Navigation Manual - Page 469
- 2012 Toyota 4Runner | Navigation Manual - Page 470
the desired data from the list. 7. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will be deleted at the same time. 5. Touch "Options". 6. Touch "Delete Contact". 248 - 2012 Toyota 4Runner | Navigation Manual - Page 471
- 2012 Toyota 4Runner | Navigation Manual - Page 472
also display the "Speed Dials" screen in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". 4. Touch "Manage Speed Dials". 4. Touch "Options". Please refer to the following pages for each setting. 249 - 2012 Toyota 4Runner | Navigation Manual - Page 473
- 2012 Toyota 4Runner | Navigation Manual - Page 474
SETUP D Registering the speed dial You can register the desired phone number from phonebook. Up to 18 numbers per phone can be registered. 3. Touch the desired phone number. 1. Touch "New Speed Dial". 4. Touch the touch−screen button you want to register in. 2. Select the data you want to - 2012 Toyota 4Runner | Navigation Manual - Page 475
- 2012 Toyota 4Runner | Navigation Manual - Page 476
. 2. Touch "Phone". 3. Touch "Speed Dials". 5. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to replace it. 4. Touch "(add new)". 6. When this screen is displayed, the operation is complete. 5. Touch "Yes" to set new speed dial. 251 - 2012 Toyota 4Runner | Navigation Manual - Page 477
- 2012 Toyota 4Runner | Navigation Manual - Page 478
SETUP From "Contact Data" screen 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 6. Select the data you want to register. 5. Touch "Options". 7. Touch the desired phone number. 6. Touch "Set Speed Dial". 252 - 2012 Toyota 4Runner | Navigation Manual - Page 479
- 2012 Toyota 4Runner | Navigation Manual - Page 480
SETUP D Editing the speed dial You can edit the speed dial. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 1. Touch "Edit Speed Dials". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 253 - 2012 Toyota 4Runner | Navigation Manual - Page 481
- 2012 Toyota 4Runner | Navigation Manual - Page 482
SETUP D Deleting the speed dial You can delete the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Delete Speed Dials". 5. Touch "Save". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 254 - 2012 Toyota 4Runner | Navigation Manual - Page 483
- 2012 Toyota 4Runner | Navigation Manual - Page 484
SETUP - Deleting call history You can delete the call history. 3. Touch "Yes". 1. Touch "Delete Call History". 2. Select the desired history to delete. 255 - 2012 Toyota 4Runner | Navigation Manual - Page 485
- 2012 Toyota 4Runner | Navigation Manual - Page 486
SETUP You can also delete the call history in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Call History". 3. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 4. Touch "Delete". 4. - 2012 Toyota 4Runner | Navigation Manual - Page 487
- 2012 Toyota 4Runner | Navigation Manual - Page 488
"Voice Tags" screen in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Touch "Manage Voice Tags". 4. Touch "Options". Please refer to the following pages for each setting. When recording a voice tag, do so in a quiet area. 5. Touch "Manage Voice Tags - 2012 Toyota 4Runner | Navigation Manual - Page 489
- 2012 Toyota 4Runner | Navigation Manual - Page 490
Play" to play the voice tag. When you complete the voice tag registration, touch "OK". INFORMATION When you use the voice tag, do not change the language setting from the language setting used when registering. If they are different, the voice recognition can't recognize the voice tag that you have - 2012 Toyota 4Runner | Navigation Manual - Page 491
- 2012 Toyota 4Runner | Navigation Manual - Page 492
from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 5. Touch "Options". 6. Touch "Set Voice Tag". 259 - 2012 Toyota 4Runner | Navigation Manual - Page 493
- 2012 Toyota 4Runner | Navigation Manual - Page 494
SETUP D Editing the voice tag D Deleting the voice tag 1. Touch "Edit Voice Tags". 1. Touch "Delete Voice Tags". 2. Select the data you want to edit. 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 3. This - 2012 Toyota 4Runner | Navigation Manual - Page 495
- 2012 Toyota 4Runner | Navigation Manual - Page 496
peculiar to the system. You can not change it. If the same device name is displayed on the screen of your phone, refer to it. If you want to change the settings, refer to the following pages. When you change the settings, touch "Save" after changing them. 3. Touch "Bluetooth∗". 4. This screen is - 2012 Toyota 4Runner | Navigation Manual - Page 497
- 2012 Toyota 4Runner | Navigation Manual - Page 498
the following state. When "Handsfree Power" is "On": The Bluetoothr phone is automatically connected when you turn the ignition to ACCESSORY or IGNITION ON mode. When "Handsfree Power" is "Off": The Bluetoothr phone is disconnected, and the system will not connect to it next time. You can select the - 2012 Toyota 4Runner | Navigation Manual - Page 499
- 2012 Toyota 4Runner | Navigation Manual - Page 500
SETUP Editing the device name 3. Touch "Save". In case that the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 1. Touch "Edit" of "Device Name". 2. Use the - 2012 Toyota 4Runner | Navigation Manual - Page 501
- 2012 Toyota 4Runner | Navigation Manual - Page 502
You can initialize the settings. 1. Touch "Edit" of "Passcode". 1. Touch "Default". 2. Input a passcode and touch "OK". 2. Touch "Yes". If the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. 264 - 2012 Toyota 4Runner | Navigation Manual - Page 503
- 2012 Toyota 4Runner | Navigation Manual - Page 504
SETUP - Details If you connect a phone Bluetoothr audio is playing while You can do the detail settings. 1. Push the "SETUP" button. 2. Touch "Phone". This screen is displayed, and the Bluetoothr audio will stop temporarily. 3. Touch "Details". 4. Do each setting according to the following - 2012 Toyota 4Runner | Navigation Manual - Page 505
- 2012 Toyota 4Runner | Navigation Manual - Page 506
the method of the incoming call display. 2. Touch "Full Screen" or "Drop Down". "Full Screen" mode ...When a call is received, the Hands−free screen is displayed and you can operate it on the screen. "Drop Down" mode ...The message is displayed on the upper side of the screen. You can only operate - 2012 Toyota 4Runner | Navigation Manual - Page 507
- 2012 Toyota 4Runner | Navigation Manual - Page 508
SETUP D The Bluetoothr connection status at start up 1. Touch "Display Phone Status". When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the connection check is displayed. When "Display Phone Status" is "On", this status is - 2012 Toyota 4Runner | Navigation Manual - Page 509
- 2012 Toyota 4Runner | Navigation Manual - Page 510
SETUP Audio Settings - - Select portable player D Initializing the settings You can initialize the settings. The portable player to connect can be selected. The registered audio information can be confirmed and edited. D Selecting a portable player If you register a second portable player, either - 2012 Toyota 4Runner | Navigation Manual - Page 511
- 2012 Toyota 4Runner | Navigation Manual - Page 512
. "Device Name" ...The name of Bluetoothr portable player which is displayed on the screen. You can change it into a desired name. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr portable players with the same device name and you - 2012 Toyota 4Runner | Navigation Manual - Page 513
- 2012 Toyota 4Runner | Navigation Manual - Page 514
a device name You can change a device name. Even if you change a device name, the name registered in your portable player is not changed. D Selecting Connection method The connection method can be selected. From Vehicle: Connect the audio system to the portable player. From Portable Player: Connect - 2012 Toyota 4Runner | Navigation Manual - Page 515
- 2012 Toyota 4Runner | Navigation Manual - Page 516
operation of the portable player, see the manual that comes with it. If you want to cancel the entry, touch "Cancel". U10009GS 2. Touch "Register" of "Bluetooth∗ Audio" on "BT Audio Settings" screen. ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. U10011GS 4. When the connection is - 2012 Toyota 4Runner | Navigation Manual - Page 517
- 2012 Toyota 4Runner | Navigation Manual - Page 518
SETUP When another Bluetoothr device is connected (a) Removing a Bluetoothr audio U10013GS 1. Touch "Remove" of "Bluetooth∗ Audio" on "BT Audio Settings" screen. When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it, touch "Yes". - 2012 Toyota 4Runner | Navigation Manual - Page 519
- 2012 Toyota 4Runner | Navigation Manual - Page 520
is in use, this screen will appear. Touch "Yes". The system will disconnect the portable player and remove it. Touch "On" for "Auto Bluetooth∗ Connect" to activate the automatic connection for the Bluetoothr. Always set it to this mode and leave the Bluetoothr portable player in a condition where - 2012 Toyota 4Runner | Navigation Manual - Page 521
- 2012 Toyota 4Runner | Navigation Manual - Page 522
When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the selected portable player will be automatically connected and the connection result is displayed. MANUALLY When the auto connection failed or turned off, you have to connect Bluetoothr manually. For the manual operation, see - 2012 Toyota 4Runner | Navigation Manual - Page 523
- 2012 Toyota 4Runner | Navigation Manual - Page 524
a device name, the name registered your portable player is not changed. (e) Initializing the Bluetoothr audio settings You can initialize the settings. U10023GS U10021GS are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the audio, the device name of the phone will - 2012 Toyota 4Runner | Navigation Manual - Page 525
- 2012 Toyota 4Runner | Navigation Manual - Page 526
SETUP Vehicle Settings - - Maintenance When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components. (See page 27.) D Setting maintenance information (See page 277.) D Setting dealer (See page 278.) 1. Push the "SETUP" button. - 2012 Toyota 4Runner | Navigation Manual - Page 527
- 2012 Toyota 4Runner | Navigation Manual - Page 528
to be serviced, the touch screen button color will change to orange. INFORMATION ITEMS "Engine oil": Replace engine oil "Oil filter": Replace engine oil filter "Rotation": Rotate tires "Tires": Replace tires "Battery": Replace battery "Brake pad": Replace brake pads "Wipers": Replace wiper blades - 2012 Toyota 4Runner | Navigation Manual - Page 529
- 2012 Toyota 4Runner | Navigation Manual - Page 530
refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. 5. If the dealer has not been registered, enter the location of the dealer in the same way as - 2012 Toyota 4Runner | Navigation Manual - Page 531
- 2012 Toyota 4Runner | Navigation Manual - Page 532
" or "Contact" 6. Touch "Edit" for the item you want to change. "Dealer": To enter the name of a dealer. (See page 279.) "Contact": To enter the name of a dealer member. (See page 279.) "Location": To set a location. (See page 280.) "Phone #": To set a telephone number. (See page 280.) "Delete - 2012 Toyota 4Runner | Navigation Manual - Page 533
- 2012 Toyota 4Runner | Navigation Manual - Page 534
SETUP D To edit "Location" D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch the 8 directional touch to screen button to move the cursor the desired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Enter the - 2012 Toyota 4Runner | Navigation Manual - Page 535
- 2012 Toyota 4Runner | Navigation Manual - Page 536
APPENDIX SECTION APPENDIX Appendix 9 D Limitations of the navigation system ...282 D Map database information and updates ...284 Changing the map DVD−ROM ...293 281 - 2012 Toyota 4Runner | Navigation Manual - Page 537
- 2012 Toyota 4Runner | Navigation Manual - Page 538
, and in some case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system will compensate for this most of the time, obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the - 2012 Toyota 4Runner | Navigation Manual - Page 539
- 2012 Toyota 4Runner | Navigation Manual - Page 540
driving with tire chains installed. D When the tires are worn. D After replacing a tire or tires. D When using tires that are smaller or larger than the factory specifications. D When the tire pressure in any of the four tires is not correct. INFORMATION If your vehicle cannot receive GPS signals - 2012 Toyota 4Runner | Navigation Manual - Page 541
- 2012 Toyota 4Runner | Navigation Manual - Page 542
After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 228.) This navigation system uses tire pressure of all four tires is correct. This system uses the maps of DENSO. © 2011 DENSO CORPORATION © 2010 NAVTEQ. All rights reserved. © 2010 Tele Atlas North - 2012 Toyota 4Runner | Navigation Manual - Page 543
- 2012 Toyota 4Runner | Navigation Manual - Page 544
misuse. You shall not extract stand−alone data from or publish any part of the DATABASE without the prior written consent of TANA and its licensors or reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for which - 2012 Toyota 4Runner | Navigation Manual - Page 545
- 2012 Toyota 4Runner | Navigation Manual - Page 546
DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION information due to the passage of time, changing circumstances, and due to the nature of restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions - 2012 Toyota 4Runner | Navigation Manual - Page 547
- 2012 Toyota 4Runner | Navigation Manual - Page 548
NH 03766−1445. Phone: 603.643. 0330. The DATABASE is ©1984−2010 by Tele Atlas North America, Inc. ALL RIGHTS RESERVED. For purpose of competent jurisdiction considers this clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered terminated and null and - 2012 Toyota 4Runner | Navigation Manual - Page 549
- 2012 Toyota 4Runner | Navigation Manual - Page 550
NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided , non−commercial purposes, and not for service bureau, time−sharing or other similar purposes . You may not decompile, disassemble or reverse engineer any portion of this information, and may not - 2012 Toyota 4Runner | Navigation Manual - Page 551
- 2012 Toyota 4Runner | Navigation Manual - Page 552
and representatives of each of them) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney's fees, arising out of or in connection with any use - 2012 Toyota 4Runner | Navigation Manual - Page 553
- 2012 Toyota 4Runner | Navigation Manual - Page 554
ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2010. Prices are not established, controlled or approved by the United States Postal ServiceR system for the solely personal, non−commercial purposes for which you were licensed, and not for service reverse engineer any - 2012 Toyota 4Runner | Navigation Manual - Page 555
- 2012 Toyota 4Runner | Navigation Manual - Page 556
you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic - 2012 Toyota 4Runner | Navigation Manual - Page 557
- 2012 Toyota 4Runner | Navigation Manual - Page 558
from anywhere any part of the Data ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit these End−User Terms under which this data was provided. © 2010 NAVTEQ − All rights reserved. If the Contracting Officer, federal - 2012 Toyota 4Runner | Navigation Manual - Page 559
- 2012 Toyota 4Runner | Navigation Manual - Page 560
areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 1. Push the "INFO·PHONE" button. 2. Touch "Map Data". 3. Touch " DVD". The display opens - 2012 Toyota 4Runner | Navigation Manual - Page 561
- 2012 Toyota 4Runner | Navigation Manual - Page 562
vehicle during sudden braking or in an accident. D To reduce the chance of injury in the case of an accident or sudden stopping while driving, keep the display closed. D Take care not to jam your hand while the display is moving. Otherwise, you could be injured. 4. Insert a new map DVD−ROM with the - 2012 Toyota 4Runner | Navigation Manual - Page 563
- 2012 Toyota 4Runner | Navigation Manual - Page 564
any interference, including interference that may cause undesired operation of the device. This Category II radiocommunication device complies with Industry Canada Standard RSS−310. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes: (1) il ne doit pas produire de - 2012 Toyota 4Runner | Navigation Manual - Page 565
- 2012 Toyota 4Runner | Navigation Manual - Page 566
APPENDIX 296 - 2012 Toyota 4Runner | Navigation Manual - Page 567
- 2012 Toyota 4Runner | Navigation Manual - Page 568
to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense - 2012 Toyota 4Runner | Navigation Manual - Page 569
- 2012 Toyota 4Runner | Navigation Manual - Page 570
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 282 through 283. 2 - 2012 Toyota 4Runner | Navigation Manual - Page 571
- 2012 Toyota 4Runner | Navigation Manual - Page 572
the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons - 2012 Toyota 4Runner | Navigation Manual - Page 573
- 2012 Toyota 4Runner | Navigation Manual - Page 574
following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it - 2012 Toyota 4Runner | Navigation Manual - Page 575
- 2012 Toyota 4Runner | Navigation Manual - Page 576
Quick guide - - Overview buttons and guidance screen No. 1 2 3 4 Name North−up or heading−up symbol Scale indicator "INFO·PHONE" button "DEST" button "MAP·VOICE" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This - 2012 Toyota 4Runner | Navigation Manual - Page 577
- 2012 Toyota 4Runner | Navigation Manual - Page 578
button to display the foot print map and the building information. Touch this button to change the screen mode. Page 31 41 9 "AAOff" 226 10 11 "Mark" "Route" "Show time at the destination. XMr NavTraffic mark "GPS" mark (Global Positioning System) This mark is displayed when XMr NavTraffic - 2012 Toyota 4Runner | Navigation Manual - Page 579
- 2012 Toyota 4Runner | Navigation Manual - Page 580
- Registering home 1 Push the "DEST" button. U0025FC 2 Touch "Go Home". If home has not been registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 50. 7 - 2012 Toyota 4Runner | Navigation Manual - Page 581
- 2012 Toyota 4Runner | Navigation Manual - Page 582
. 6 Touch "OK". Registration of home is complete. You can also register home by pushing the "SETUP" button. (See " (a) Registering home" on page 101.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 102.) 8 - 2012 Toyota 4Runner | Navigation Manual - Page 583
- 2012 Toyota 4Runner | Navigation Manual - Page 584
- Registering preset destinations 1 Push the "DEST" button. U0025FC 2 Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset destinations. See " - 2012 Toyota 4Runner | Navigation Manual - Page 585
- 2012 Toyota 4Runner | Navigation Manual - Page 586
is complete. You can also register preset destinations by pushing the "SETUP" button. (See " (a) Registering preset destinations" on page 104.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 105.) The registered points can be used on the - 2012 Toyota 4Runner | Navigation Manual - Page 587
- 2012 Toyota 4Runner | Navigation Manual - Page 588
- Operation flow: guiding the route 1 Push the "DEST" button. U0025FC 2 There are 10 different methods to search destinations. See "Destination search" on page 50. 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than - 2012 Toyota 4Runner | Navigation Manual - Page 589
- 2012 Toyota 4Runner | Navigation Manual - Page 590
has been registered. (To register "Home", see " (a) Registering home" on page 101.) 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 70 - 2012 Toyota 4Runner | Navigation Manual - Page 591
- 2012 Toyota 4Runner | Navigation Manual - Page 592
of the many Points of Interest that have already been stored in the system's database...57 3 "Previous Destinations" A destination can be selected from any 7 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...64 5 13 - 2012 Toyota 4Runner | Navigation Manual - Page 593
- 2012 Toyota 4Runner | Navigation Manual - Page 594
be selected without entering the address each time. If "Home" has not been registered, a message will be displayed and the setting screen will automatically appear. To use this function, it is necessary to set a "Home" address. (To register "Home", see "(a) Registering home" on page 101.) ...52 14 - 2012 Toyota 4Runner | Navigation Manual - Page 595
- 2012 Toyota 4Runner | Navigation Manual - Page 596
set. To display the "Setup" screen, push the "SETUP" button. U0019FC "General" Settings are available for language selection, operation sounds, automatic screen change, etc...212 1 "Vehicle" Settings are available for vehicle information such as maintenance information...276 5 "Clock" Used for - 2012 Toyota 4Runner | Navigation Manual - Page 597
- 2012 Toyota 4Runner | Navigation Manual - Page 598
. To display the "Information" screen, push the "INFO·PHONE" button. U0023FCa 1 "Phone" To view hands free phone information...126 2 "Fuel Consumption" To view fuel information...141 3 "Map Data" Displays information regarding the map data disc version or coverage area...293 4 "Calendar" To view - 2012 Toyota 4Runner | Navigation Manual - Page 599
- 2012 Toyota 4Runner | Navigation Manual - Page 600
17 - 2012 Toyota 4Runner | Navigation Manual - Page 601