2012 Toyota Camry Navigation Manual - Page 142

1. PHONE OPERATION MANUALLY When the auto connection has failed or "Bluetooth* Power" is turned off, it is necessary to connect Bluetooth® manually. 1 Vehicles with a smart key system When the "POWER" switch is in ACCESSORY or ON mode, the system searches for a nearby registered cellular phone. The system will connect with the phone that was last connected, if it is nearby. When "Display Phone Status" is set to "On", the connection status is displayed. (See "Bluetooth® DEVICE CONNECTION STATUS DISPLAY SETTINGS" on page 169.) This screen appears when the Bluetooth® phone is first connected after the "POWER" switch is in ACCESSORY or ON mode. Press the button or the on the steering wheel. Touch "Connect Phone". switch 2 3 Touch the screen button corresponding to the desired phone connection. Vehicles without a smart key system When the engine switch is in the "ACC" or "ON" position, the system searches for a nearby registered cellular phone. The system will connect with the phone that was last connected, if it is nearby. When "Display Phone Status" is set to "On", the connection status is displayed. (See "Bluetooth® DEVICE CONNECTION STATUS DISPLAY SETTINGS" on page 169.) This screen appears when the Bluetooth® phone is first connected after the engine switch is in the "ACC" or "ON" position. INFORMATION When the cellular phone's device name has not been able to be obtained, "Device 1" to "Device 5" will be displayed in the order the phones were registered. 4 The "Connect Bluetooth*" screen is displayed. ● It may take time if the phone connection is carried out during Bluetooth® device playback. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 128