2012 Toyota RAV4 Owners Manual - Page 450

5-2. Steps to take in an emergency • If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pressure. (→P. 460, 488) STEP 15 With the compressor switch off, disconnect the hose from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. STEP 16 Install the valve cap onto the valve of the emergency repaired tire. Attach the air release cap to the end of the hose. If the air release cap is not attached, the sealant may leak and the vehicle may get dirty. Do not insert sharp objects into the tip of the bottle's hose. STEP 17 STEP 18 Temporarily store the bottle in the luggage compartment while it is connected to the compressor. To spread the liquid sealant evenly within the tire, immediately drive safely for about 3 miles (5 km) below 50 mph (80 km/h). After driving for about 3 miles (5 km), stop your vehicle in a safe place on a hard, flat surface and remove the air release cap from the hose before reconnecting the repair kit. STEP 19 STEP 20 458