2012 Toyota RAV4 Navigation Manual - Page 131

1. PHONE OPERATION To hang up the phone: Touch or press the wheel. INFORMATION INCOMING CALL WAITING When a call is interrupted by a third party while talking, this screen is displayed. switch on the steering ● The continuous tone signal is the marked sign (p or w) and the number that follows the phone number. (e.g. 056133w0123p#1 ) ● When the "p" pause tone is used, after waiting 2 seconds the tone data up until the next pause tone will be automatically sent. When the "w" pause tone is used, the tone data up until the next pause tone will be automatically sent after user operation. ● This operation can be done when it is desirable to operate an answering machine or use a telephone service in a bank for example. The phone number and the code number in the phonebook can be registered. 1 Touch or press the switch on the steering wheel to start talking with the other party. Touch or press the switch on the steering wheel to refuse the call. BY VOICE RECOGNITION "Send Tones" can be operated by giving a command during a call. The operating procedure is similar to other voice recognition operations. (For the operation of voice recognition, see "VOICE COMMAND SYSTEM" on page 224.) Each time is touched or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched. INFORMATION ● If your cellular phone does not support HFP Ver. 1.5, this function cannot be used. 140