2012 Toyota Sienna Owners Manual
2012 Toyota Sienna Manual
2012 Toyota Sienna manual content summary:
- 2012 Toyota Sienna | Owners Manual - Page 1
trouble arises Points to check when you think a malfunction has occurred Index Alphabetical listing of information contained in this manual This manual contains information about the AUTO ACCESS SEAT. Refer to the "Owner's Manual" for other information regarding your vehicle. 1 SIENNA AAS_U - 2012 Toyota Sienna | Owners Manual - Page 2
TABLE OF CONTENTS Index 1 AUTO ACCESS SEAT 3 When trouble arises 3-1. When you think a malfunction has occurred AUTO ACCESS SEAT ...44 If the AUTO ACCESS SEAT does not move while outside the vehicle ...47 Wireless remote control...59 1-1. AUTO ACCESS SEAT AUTO ACCESS SEAT ...6 Head restraint - 2012 Toyota Sienna | Owners Manual - Page 3
Pic t oria l inde x AUTO ACCESS SEAT Head restraint P. 9 Seatback angle adjustment switch P. 6 Armrests P. 11 Seat position adjustment switch P. 6 Footrest P. 13 Wireless remote control P. 16 Seat position adjustment switch P. 6 Seat raise/lower switch P. 35 Seatback angle adjustment - 2012 Toyota Sienna | Owners Manual - Page 4
used throughout this manual or reduce the risk of damage to your Toyota and its equipment. Symbols used in illustrations Safety symbol The symbol of a circle with a slash through it action (pushing, turning, etc.) used to operate switches and other devices. Indicates the outcome of an operation (e.g. - 2012 Toyota Sienna | Owners Manual - Page 5
1 -1 . AU T O ACCESS SEAT AU TO ACCESS SEAT Seat position switch adjustment Seatback angle adjustment switch - 2012 Toyota Sienna | Owners Manual - Page 6
1-1. AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 7
1-1. AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 8
1 -1 . AU T O ACCESS SEAT H e a d re st ra int Head restraint is provided for the AUTO ACCESS SEAT. Up Pull the head restraint up. Lock release button 1 Down AUTO ACCESS SEAT Push the head restraint down while pressing the lock release button. - 2012 Toyota Sienna | Owners Manual - Page 9
1-1. AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 10
1 -1 . AU T O ACCESS SEAT Ar m re st s Lower the armrests as far as they will go when rotating or raising/ lowering the AUTO ACCESS SEAT. Raise Lower 1 AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 11
1-1. AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 12
1 -1 . AU T O ACCESS SEAT Foot re st Lower the footrest as far as it will go when rotating or raising/lowering the AUTO ACCESS SEAT. Raise Lower 1 AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 13
arms inside the armrests and inside the AUTO ACCESS SEAT. Lower the footrest and place both feet on the footrest. If you cannot place your feet on the footrest, have someone help you, so as not to get your feet caught between the AUTO ACCESS SEAT and the vehicle body. 14 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 14
1-1. AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 15
-1 . AU T O ACCESS SEAT Wire le ss re m ot e c ont rol The wireless remote control can be used to rotate and raise or lower the AUTO ACCESS SEAT. Indicator light Seat raise switch Seat lower switch Effective range Approximately 3.3 ft. (1 m) from the AUTO ACCESS SEAT 16 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 16
1-1. AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 17
1-1. AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 18
1-1. AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 19
the engine running. Shift the shift lever to P and set the parking brake. STEP 2 STEP 3 Check that there are no people or items of luggage around the AUTO ACCESS SEAT, and that there are no people around the vehicle. Open the right-hand sliding door fully. STEP 4 20 SIENNA AAS_U (OM45471U - 2012 Toyota Sienna | Owners Manual - Page 20
the AUTO ACCESS SEAT STEP 5 Fold the front passenger seatback while pulling the seatback angle lever. 1 AUTO ACCESS SEAT STEP 6 STEP 7 Unfasten the seat belt on the AUTO ACCESS SEAT. Adjust the armrest and foot restraint on the AUTO ACCESS SEAT to the downmost position. 21 SIENNA AAS_U - 2012 Toyota Sienna | Owners Manual - Page 21
1-2. Operating the AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 22
1-2. Operating the AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 23
1-2. Operating the AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 24
1-2. Operating the AUTO ACCESS SEAT NOTICE - 2012 Toyota Sienna | Owners Manual - Page 25
vehicle on a flat surface and leave the engine running. Shift the shift lever to P and set the parking brake. Confirm the following: The occupant is sitting co rrectly in the AUTO ACCESS SEAT. (→P. 14) • The seat belt is not cau ght up in the AUTO ACCESS SEAT. • The occupant of the right-hand third - 2012 Toyota Sienna | Owners Manual - Page 26
once, and the AUTO ACCESS SEAT will begin to move automatically. The indicator light on the wireless remote control will flash. 1 AUTO ACCESS SEAT The AUTO ACCESS SEAT will rotate while the seatback reclines and while moving towards the front of the vehicle. The AUTO ACCESS SEAT will slide out - 2012 Toyota Sienna | Owners Manual - Page 27
1-2. Operating the AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 28
1-2. Operating the AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 29
1 -2 . Ope ra t ing t he AU T O ACCESS SEAT Re t urning t he AUTO ACCESS SEAT t o t he ve hicle STEP 1 Park the vehicle on a flat surface and leave the engine running. Shift the shift lever to P and set the parking brake. Confirm the following: The right-hand sliding door is fully open. The - 2012 Toyota Sienna | Owners Manual - Page 30
1-2. Operating the AUTO ACCESS SEAT The beep will sound once, and the AUTO ACCESS SEAT will begin to move automatically while the seatback reclines. The indicator light on the wireless remote control will flash. 1 AUTO ACCESS SEAT The AUTO ACCESS SEAT will rotate while the seatback raises and - 2012 Toyota Sienna | Owners Manual - Page 31
1-2. Operating the AUTO ACCESS SEAT - 2012 Toyota Sienna | Owners Manual - Page 32
1-2. Operating the AUTO ACCESS SEAT CAUTION - 2012 Toyota Sienna | Owners Manual - Page 33
1-2. Operating the AUTO ACCESS SEAT NOTICE - 2012 Toyota Sienna | Owners Manual - Page 34
SEAT. (The AUTO ACCESS SEAT will operate in the same way as when operated using the wireless remote control). STEP 1 1 Park the vehicle on a flat surface and leave the engine running. Shift the shift lever to P and set the parking brake. Open the right-hand sliding door fully. Fold the front - 2012 Toyota Sienna | Owners Manual - Page 35
1-2. Operating the AUTO ACCESS SEAT STEP 6 When the AUTO ACCESS SEAT stops automatically, release the switch. When returning the AUTO ACCESS SEAT to the vehicle, release the switch after the seat has stopped automatically and the beep has sounded once. - 2012 Toyota Sienna | Owners Manual - Page 36
2 -1 . M a int e na nc e Che ck ing a nd re pla c ing fuse s If the AUTO ACCESS SEAT does not operate when the switches are pressed, a fuse may have blown. If this happens, check and replace the fuses as necessary. Fuse layout and amperage rating - 2012 Toyota Sienna | Owners Manual - Page 37
2-1. Maintenance - 2012 Toyota Sienna | Owners Manual - Page 38
2 -1 . M a int e na nc e Wire le ss re m ot e c ont rol bat t e r y Replace the battery with a new one if it is discharged. - 2012 Toyota Sienna | Owners Manual - Page 39
2-1. Maintenance STEP 3 Insert a new battery with the "+" terminal facing up. Securely replace the cover after replacing the battery. 2 Maintenance - 2012 Toyota Sienna | Owners Manual - Page 40
2-1. Maintenance NOTICE - 2012 Toyota Sienna | Owners Manual - Page 41
that the AUTO ACCESS SEAT is malfunctioning, try the correction procedures listed in the table below. If the seat still does not operate even after trying the procedures, it is likely that the seat is malfunctioning. Do not use the AUTO ACCESS SEAT, and have the seat inspected by your Toyota dealer - 2012 Toyota Sienna | Owners Manual - Page 42
blown and replace it as necessary. 3 The engine is not running. The switch is being pressed repeatedly. The fuse has blown. The vehicle battery has been removed while the AUTO ACCESS SEAT was operating. Reconnect the battery and refer to P. 47. When trouble arises If the right-hand sliding door - 2012 Toyota Sienna | Owners Manual - Page 43
the vehicle. Correction procedure Press and hold the seat raise switch on the wireless remote control or the raise side of the seat raise/lower switch, and confirm that the AUTO ACCESS SEAT stops automatically and the beep sounds once. Then, try adjusting the seat again. 46 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 44
by your Toyota dealer. If the AUTO ACCESS SEAT stops moving while raising, lowering or rotating, or while it is outside the vehicle, you will not be able to close the right-hand sliding door. Use the techniques outlined here to stow the seat inside the vehicle. If the AUTO ACCESS SEAT is occupied - 2012 Toyota Sienna | Owners Manual - Page 45
or lower side of the seat raise/lower switch ( ) 4 times. The beep sounds twice when initialization of the seat position information has been completed. Conduct the procedures explained in the following "If the AUTO ACCESS SEAT moves when a switch is pressed" section. 48 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 46
while pulling the seatback angle lever. (→P. 20) Press and hold the raise side of the seat raise/lower switch while the AUTO ACCESS SEAT raises, a short beep sounds, the seat slides further into the vehicle and a short beep sounds again. 3 When trouble arises STEP 4 49 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 47
while the lower side of the seat raise/lower switch is being pressed, the AUTO ACCESS SEAT will slide towards the front of the vehicle. STEP 6 Press the forward side of the seat position adjustment switch on the right-hand side of the seat, and rotate the AUTO ACCESS SEAT toward the inside of the - 2012 Toyota Sienna | Owners Manual - Page 48
position adjustment switch is pressed and held while the lower side of the seat raise/lower switch is being pressed, the AUTO ACCESS SEAT will slide towards the front of the vehicle. 3 When trouble arises STEP 8 Press and hold the rear side of the seatback angle adjustment switch on the right - 2012 Toyota Sienna | Owners Manual - Page 49
3-1. When you think a malfunction has occurred STEP 9 Press and hold the front side of the seatback angle adjustment switch on the right-hand side of the seat until a long beep sounds. 52 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 50
return to the vehicle, the following procedure can be used to return the AUTO ACCESS SEAT to the vehicle. STEP 1 STEP 2 STEP 3 Adjust the head restraint to the downmost position. (→P. 9) Fold the footrest up. (→P. 13) Fold the front passenger seatback while pulling the seatback angle lever. (→P. 20 - 2012 Toyota Sienna | Owners Manual - Page 51
6 Take out wrench. Removal the combination Replacement Combination wrench STEP 7 Remove the connector. STEP 8 Turn the bolt with yellow marking using the combination wrench, and move the AUTO ACCESS SEAT until the marks are aligned as shown in the illustration. 54 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 52
2 bolts on the underside of the AUTO ACCESS SEAT. STEP 10 Slide the AUTO ACCESS SEAT into the vehicle. 3 When trouble arises STEP 11 Turn the bolt with yellow marking using the combination wrench, and move the AUTO ACCESS SEAT until the bolt can no longer be turned. 55 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 53
. STEP 13 Use the combination wrench to loosen the two bolts, then slide the motor out of the way and disconnect it from the gear. STEP 14 Rotate the seat into a position which does not cause the left edge of the seat cushion to make contact with the vehicle body. 56 SIENNA AAS_U (OM45471U - 2012 Toyota Sienna | Owners Manual - Page 54
door main switch off and close the right-hand sliding door manually. Have the seat inspected by your Toyota dealer immediately. The power sliding door will not operate if the AUTO ACCESS SEAT has been stowed inside the vehicle manually. For information regarding the power sliding door, refer to the - 2012 Toyota Sienna | Owners Manual - Page 55
3-1. When you think a malfunction has occurred CAUTION - 2012 Toyota Sienna | Owners Manual - Page 56
Move to within approximately 3.3 ft. (1 m) of the AUTO ACCESS SEAT and operate the wireless remote control. Change your standing position. Operate the seat using the seat raise/lower switch. Replace the battery. (→P. 40) 3 When trouble arises Electromagnetic waves in the surrounding area may cause - 2012 Toyota Sienna | Owners Manual - Page 57
procedure Replace the battery. (→P. 40) If the indicator light is illuminated or flashing even though the wireless remote control switches are not being pressed Reason The wireless remote control may be malfunctioning. Correction procedure Contact your Toyota dealer. 60 SIENNA AAS_U (OM45471U) - 2012 Toyota Sienna | Owners Manual - Page 58
11 AUTO ACCESS SEAT ...6 O Operating with the seat raise/lower switch ...35 B Battery Disconnecting...7 Beep sounds ...22 Before operating the seat...20 R Replacing the fuses...38 Returning the seat to the vehicle...30 S Seat position adjustment C Child safety Installing child restraint system - 2012 Toyota Sienna | Owners Manual - Page 59
information 5 When trouble arises What to do if the vehicle needs to be towed, gets a flat tire, or is involved in an accident 6 Vehicle specifications Detailed vehicle information 7 For owners Reporting safety defects for U.S. owners, and seat belt and SRS air bag instructions for Canadian - 2012 Toyota Sienna | Owners Manual - Page 60
. Noise from under vehicle after turning off the engine Approximately five hours after the engine is turned off, you may hear sound coming from under the vehicle for several minutes. This is the sound of a fuel evaporation leakage check and, it does not indicate a malfunction. Accessories, spare - 2012 Toyota Sienna | Owners Manual - Page 61
-port fuel injection system/sequential multi-port fuel injection system ● Cruise control system ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation of a mobile - 2012 Toyota Sienna | Owners Manual - Page 62
such as: • Engine speed • Accelerator status or pictures. ● Data usage Toyota may use the data date collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those services, please refer to the Safety Connect Telematics Subscription Service - 2012 Toyota Sienna | Owners Manual - Page 63
. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or near crash event. The SRS airbag sensor assembly contains the EDR. In a crash or near crash event, this device may record the following information: • Engine speed • Whether the - 2012 Toyota Sienna | Owners Manual - Page 64
as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle. Perchlorate Material Special handling may apply, See www.dtsc.ca - 2012 Toyota Sienna | Owners Manual - Page 65
CAUTION - 2012 Toyota Sienna | Owners Manual - Page 66
Symbols used throughout this manual Cautions & Notices CAUTION This is a warning against anything which not do in order to avoid or reduce the risk of damage to your Toyota and its equipment. Symbols used in illustrations Safety symbol The symbol of a circle with a slash through it means "Do not", " - 2012 Toyota Sienna | Owners Manual - Page 67
1 -1 . K e y inform a t ion Ke ys The following keys are provided with the vehicle. Vehicles without a smart key system (type A) Master keys Valet key Key number plate Vehicles without a smart key system (type B) Master keys (black) Valet key (gray) Key number plate Vehicles with a smart key - 2012 Toyota Sienna | Owners Manual - Page 68
1-1. Key information Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push be inserted in a lock cylinder, turn it over and re-attempt to insert it. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the - 2012 Toyota Sienna | Owners Manual - Page 69
1-1. Key information - 2012 Toyota Sienna | Owners Manual - Page 70
1-1. Key information NOTICE - 2012 Toyota Sienna | Owners Manual - Page 71
Sm a r t ke y syst e m ∗ The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (→P. 37) Locks and unlocks the doors (→P. 38) Starts and stops the - 2012 Toyota Sienna | Owners Manual - Page 72
1-2. Opening, closing and locking the doors Unlocking and locking the doors Front door handles Grip the handle to unlock all the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked. 1 Before driving Touch the lock - 2012 Toyota Sienna | Owners Manual - Page 73
1-2. Opening, closing and locking the doors Back door Press the unlock unlock all the doors. button to The door cannot be unlocked for 3 seconds after the door is locked. Lock the back door again when you leave the vehicle. The back door will not lock automatically after it has been opened and - 2012 Toyota Sienna | Owners Manual - Page 74
1-2. Opening, closing and locking the doors Antenna location and effective range - 2012 Toyota Sienna | Owners Manual - Page 75
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 76
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 77
1-2. Opening, closing and locking the doors Alarm Situation The "ENGINE START STOP" switch was turned to ACCESSORY mode while the driver's door was open (or the driver's door was opened while the "ENGINE START STOP" switch was in ACCESSORY mode) When the "ENGINE START STOP" switch is in IGNITION - 2012 Toyota Sienna | Owners Manual - Page 78
and closed the door while the "ENGINE START STOP" switch was not off Start the engine with the electronic key present*2 Before driving Interior alarm pings once and exterior alarm sounds 3 times*1 Turn the "ENGINE START STOP" switch OFF and close the driver's door again Bring the electronic key - 2012 Toyota Sienna | Owners Manual - Page 79
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 80
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 81
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 82
with a metallic content or metallic objects are attached to the rear window ● Vehicles with AUTO ACCESS SEAT: If the wireless remote control of the AUTO ACCESS SEAT is operated simultaneously, the AUTO ACCESS SEAT may not operate properly. For details, refer to "AUTO ACCESS SEAT OWNER'S MANUAL". - 2012 Toyota Sienna | Owners Manual - Page 83
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 84
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 85
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 86
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 87
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 88
ss re m ot e c ont rol The wireless remote control can be used to lock and unlock the vehicle. Vehicles without a smart key system (type A) Locks all doors Unlocks all doors Before driving 1 Pressing the button unlocks the driver's side doors. Pressing the button again within 3 seconds unlocks the - 2012 Toyota Sienna | Owners Manual - Page 89
1-2. Opening, closing and locking the doors Vehicles without a smart key system (type B) Locks all doors Unlocks all doors Pressing the button unlocks the driver's side doors. Pressing the button again within 3 seconds unlocks the other doors. Opens and closes the left side power sliding door ( - 2012 Toyota Sienna | Owners Manual - Page 90
closing and locking the doors Vehicles with a smart key system Locks all doors Unlocks all doors Pressing the button unlocks the driver's side doors. Pressing the button again within 3 seconds closes the power back door (press and hold) Sounds alarm (press and hold) 55 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 91
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 92
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 93
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 94
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 95
1 -2 . Ope ning, c losing a nd loc k ing t he doors Front doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. - 2012 Toyota Sienna | Owners Manual - Page 96
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 97
doors cannot be locked if either of the front doors is open and the key is in the engine switch. Vehicles with a smart key system The door cannot be locked if the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle. The key may not - 2012 Toyota Sienna | Owners Manual - Page 98
or higher. All the doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch to "ACC" or "LOCK". All the doors are unlocked when the driver's door is opened within 10 seconds after turning the "ENGINE START STOP" switch off. 1 Before driving 63 SIENNA_U - 2012 Toyota Sienna | Owners Manual - Page 99
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 100
the desired function to be set are shown in the following table. Use the same procedure to cancel the function. Function Shift lever position Door Shift position linked door unlocking function Speed linked door locking function Driver's door linked door unlocking function P N When the setting or - 2012 Toyota Sienna | Owners Manual - Page 101
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 102
ing t he doors Sliding doors Vehicles without power sliding doors The sliding doors can be opened and closed using the sliding door handle. The sliding door can be locked and unlocked using the wireless remote control, door lock switch or inside lock knob. 1 Vehicles with power sliding doors The - 2012 Toyota Sienna | Owners Manual - Page 103
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 104
1-2. Opening, closing and locking the doors From second seats Press the switch to open and close each sliding door. Pressing the switch again while the door is operating will cause the operation to reverse. - 2012 Toyota Sienna | Owners Manual - Page 105
Turn the main switch off to disable the power sliding door system. Off The sliding doors can only be opened and closed manually. On* The power sliding door can be opened and closed with the power sliding door switches for the front occupants or wireless remote control even if the sliding door child - 2012 Toyota Sienna | Owners Manual - Page 106
1-2. Opening, closing and locking the doors Sliding door child-protector locks The sliding door cannot be opened by the inside door handle and the second seat sliding door switch when the lock is set. These locks can be set to prevent children from opening the sliding doors. Push down on each - 2012 Toyota Sienna | Owners Manual - Page 107
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 108
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 109
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 110
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 111
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 112
1-2. Opening, closing and locking the doors CAUTION ● When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. ● Open the sliding door fully while passengers are getting on or off - 2012 Toyota Sienna | Owners Manual - Page 113
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 114
. The sliding door then has to be operated manually. Take extra care when on an incline, as engine is started during automatic operation Vehicles with a smart key system: When the battery voltage suddenly drops, such as when the "ENGINE START STOP" switch is turned to IGNITION ON mode or the engine - 2012 Toyota Sienna | Owners Manual - Page 115
1-2. Opening, closing and locking the doors CAUTION ● Do not attach any accessories other than genuine Toyota parts to the power sliding door. The power sliding child-protector locks are set, make sure to turn off the power sliding door system with the main switch in order to totally disable the - 2012 Toyota Sienna | Owners Manual - Page 116
1-2. Opening, closing and locking the doors NOTICE - 2012 Toyota Sienna | Owners Manual - Page 117
a nd loc k ing t he doors Ba ck door The back door can be locked and unlocked using the entry function (vehicles with a smart key system), wireless remote control or door lock switch. The back door can be opened using the back door opener. In addition, the power back door can be opened/closed - 2012 Toyota Sienna | Owners Manual - Page 118
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 119
flashers flash twice to indicate that the back door is opening/closing. Canceling the power back door system (vehicles with power back door) Turn the main switch off to disable the power back door system. Off On* *: Orange mark on the switch should be visible when the switch is on. 84 SIENNA_U - 2012 Toyota Sienna | Owners Manual - Page 120
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 121
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 122
1-2. Opening, closing and locking the doors - 2012 Toyota Sienna | Owners Manual - Page 123
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 124
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 125
When closing the back door, make sure to press it lightly on its outer surface. If the back door handle is used to fully close the back door, it may result in caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. 90 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 126
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 127
to malfunction, or the back door may fall closed again after being opened, causing someone's hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. 92 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 128
1-2. Opening, closing and locking the doors CAUTION - 2012 Toyota Sienna | Owners Manual - Page 129
1-2. Opening, closing and locking the doors NOTICE - 2012 Toyota Sienna | Owners Manual - Page 130
ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Front se at s Manual seat Seat position lever adjustment 1 Seatback angle adjustment lever Vertical height adjustment lever (driver's side only) Lumbar support adjustment knob (driver's side only) Before driving 95 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 131
components (seats, mirrors, steering wheel) Power seat Seat position switch adjustment Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver's side only) Vertical height adjustment switch (driver's side only) Lumbar support adjustment switch (driver's side - 2012 Toyota Sienna | Owners Manual - Page 132
performed, the seat will move backward (auto away function): • The shift lever has been shifted to P • Vehicles without a smart key system: The engine switch has been turned off. Vehicles with a smart key system: The "ENGINE START STOP" switch has been turned off. • The driver seat belt has been - 2012 Toyota Sienna | Owners Manual - Page 133
has been performed, the seat will move forward (auto return function): • Vehicles without a smart key system: The engine switch has been turned to the "ACC" position. Vehicles with a smart key system: The "ENGINE START STOP" switch has been turned to ACCESSORY mode. • The driver seat belt has been - 2012 Toyota Sienna | Owners Manual - Page 134
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 135
s Second seats (Tip-up seat) Seat position lever adjustment Seatback angle adjustment lever Second seats (Ottoman seat) Seat position lever adjustment Seatback angle adjustment lever Ottoman angle adjustment lever Second seats (AUTO ACCESS SEAT) Refer to "AUTO ACCESS SEAT OWNER'S MANUAL". 100 - 2012 Toyota Sienna | Owners Manual - Page 136
1-3. Adjustable components (seats, mirrors, steering wheel) Third seats (manual seat) Seatback angle adjustment strap 1 Before driving Third seats (power seat) Seatback angle adjustment switch 101 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 137
1-3. Adjustable components (seats, mirrors, steering wheel) Moving a second seat for third seat access - 2012 Toyota Sienna | Owners Manual - Page 138
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 139
1-3. Adjustable components (seats, mirrors, steering wheel) Removing the second seats - 2012 Toyota Sienna | Owners Manual - Page 140
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 141
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 142
1-3. Adjustable components (seats, mirrors, steering wheel) Installing the second seats - 2012 Toyota Sienna | Owners Manual - Page 143
(seats, mirrors, steering wheel) STEP 2 Lower the seat and engage the latches. If you locked the seat latches unintentionally before installing securely, pull the release lever to unlock the latches. Make sure the seat is locked in place by trying to shake the seatback and lift up the seat - 2012 Toyota Sienna | Owners Manual - Page 144
1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (manual seats) - 2012 Toyota Sienna | Owners Manual - Page 145
1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (power seats) You can operate the power third seats when the shift lever is in P. - 2012 Toyota Sienna | Owners Manual - Page 146
1-3. Adjustable components (seats, mirrors, steering wheel) Stowing the third seats (manual seats) Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. - 2012 Toyota Sienna | Owners Manual - Page 147
1-3. Adjustable components (seats, mirrors, steering wheel) STEP 2 Push the seat against the floor and make sure it is locked securely. Open the flaps. - 2012 Toyota Sienna | Owners Manual - Page 148
1-3. Adjustable components (seats, mirrors, steering wheel) Stowing the third seats (power seats) You can operate the power third seats when the shift lever is in P. Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. - 2012 Toyota Sienna | Owners Manual - Page 149
1-3. Adjustable components (seats, mirrors, steering wheel) STEP 2 Open the flaps. ITN13N056 - 2012 Toyota Sienna | Owners Manual - Page 150
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 151
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 152
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 153
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 154
1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE - 2012 Toyota Sienna | Owners Manual - Page 155
c om pone nt s (se a t s, m irrors, st e e ring w he e l) Driving posit ion m e m or y ∗ Your preferred driving position (the position of the driver's seat and outside rear view mirrors) can be memorized and recalled with the touch of a button. It is also possible to set this function to activate - 2012 Toyota Sienna | Owners Manual - Page 156
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 157
a smart key system Carry only the wireless remote control to which you want to link the driving position. STEP 1 Unlock the vehicle with the wireless remote control to which you want to link the driving position. Shift the shift lever to P and close the driver's door. Turn the engine switch to the - 2012 Toyota Sienna | Owners Manual - Page 158
key system Carry only the electronic key to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly. 1 STEP 1 Shift the shift lever to P and close the driver's door. Turn the "ENGINE START STOP" switch to IGNITION ON mode - 2012 Toyota Sienna | Owners Manual - Page 159
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 160
release button. Lock release button Before driving Second center* and third center seats Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button *: 8-passenger models only To use Pull the head restraints up. Third outside - 2012 Toyota Sienna | Owners Manual - Page 161
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 162
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 163
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) Se at be lt s Make sure that all occupants are wearing their seat belts before driving the vehicle. - 2012 Toyota Sienna | Owners Manual - Page 164
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 165
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 166
seat belts (front seats of vehicles with pre-collision system) If the pre-collision sensor detects that a collision is unavoidable, the pre-collision system will retract the seat belt, thus enhancing the effectiveness of the seat belt pretensioner in a crash. The same will happen if the driver - 2012 Toyota Sienna | Owners Manual - Page 167
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 168
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 169
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 170
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 171
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 172
1 -3 . Adjust a ble c om pone nt s (se a t s, m irrors, st e e ring w he e l) St e e ring w he e l The steering wheel can be adjusted to a comfortable position. STEP 1 Hold the steering wheel and press the lever down. 1 Before driving STEP 2 Adjust to the ideal position by moving the steering - 2012 Toyota Sienna | Owners Manual - Page 173
, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced. Turns automatic mode on/off The indicator comes on when automatic mode is turned on. Vehicles without a smart key system The mirror will revert to the automatic mode each time the engine - 2012 Toyota Sienna | Owners Manual - Page 174
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. 1 Before driving - 2012 Toyota Sienna | Owners Manual - Page 175
c om pone nt s (se a t s, m irrors, st e e ring w he e l) Out side re a r vie w m irrors Mirror angle can be adjusted using the switch. STEP 1 To select a mirror to adjust, press the switch. Left Right STEP 2 To adjust the mirror, press the switch. Up Right Down Left 140 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 176
1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Manual type Push the mirror back in the direction of the vehicle's rear. 1 Before driving Power type Press the switch to fold the mirrors. Press it again to extend them to the original position. 141 SIENNA_U ( - 2012 Toyota Sienna | Owners Manual - Page 177
1-3. Adjustable components (seats, mirrors, steering wheel) - 2012 Toyota Sienna | Owners Manual - Page 178
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 179
. Ope ning a nd c losing t he w indow s a nd m oon roof Pow e r w indow s The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing* Opening One-touch opening* *: Pressing the switch in the opposite direction - 2012 Toyota Sienna | Owners Manual - Page 180
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 181
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 182
1-4. Opening and closing the windows and moon roof CAUTION - 2012 Toyota Sienna | Owners Manual - Page 183
. Ope ning a nd c losing t he w indow s a nd m oon roof Qua r t e r w indow s The quarter windows can be opened to bring in fresh outside air for additional ventilation. Manual type Pull the handle and swing the window fully out to open. Power type Opening Closing Both the left and right quarter - 2012 Toyota Sienna | Owners Manual - Page 184
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 185
1 -4 . Ope ning a nd c losing t he w indow s a nd m oon roof M oon roof ∗ Use the overhead switches to open and close the moon roof. - 2012 Toyota Sienna | Owners Manual - Page 186
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 187
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 188
1-4. Opening and closing the windows and moon roof - 2012 Toyota Sienna | Owners Manual - Page 189
1-4. Opening and closing the windows and moon roof CAUTION - 2012 Toyota Sienna | Owners Manual - Page 190
1 -5 . Re fue ling Ope ning t he fue l t a nk c a p Perform the following steps to open the fuel tank cap: - 2012 Toyota Sienna | Owners Manual - Page 191
1-5. Refueling STEP 3 Hang the fuel tank cap on the back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction. - 2012 Toyota Sienna | Owners Manual - Page 192
1-5. Refueling CAUTION - 2012 Toyota Sienna | Owners Manual - Page 193
1-5. Refueling CAUTION - 2012 Toyota Sienna | Owners Manual - Page 194
STOP" switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the "ENGINE START STOP" switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled. Before driving ∗: If equipped 159 SIENNA_U (OM45477U - 2012 Toyota Sienna | Owners Manual - Page 195
1-6. Theft deterrent system - 2012 Toyota Sienna | Owners Manual - Page 196
1-6. Theft deterrent system CAUTION - 2012 Toyota Sienna | Owners Manual - Page 197
1 -6 . T he ft de t e rre nt syst e m Ala r m ∗ The system sounds the alarm and flashes the lights when forced entry is detected. - 2012 Toyota Sienna | Owners Manual - Page 198
1-6. Theft deterrent system - 2012 Toyota Sienna | Owners Manual - Page 199
1-6. Theft deterrent system - 2012 Toyota Sienna | Owners Manual - Page 200
1 -6 . T he ft de t e rre nt syst e m T he ft preve nt ion la be ls (for U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law. 1 Before driving 165 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 201
Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 95) Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to in place with the center of the head restraint closest to the top of your ears. (→P.125) Wear the - 2012 Toyota Sienna | Owners Manual - Page 202
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 203
inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. 168 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 204
protect the head and chest of the driver and front passenger from impact with interior components. SRS driver knee airbag Can help provide driver protection. SRS side and curtain shield airbags SRS side airbags Can help protect the torsos of the front seat occupants. SRS curtain shield airbags Can - 2012 Toyota Sienna | Owners Manual - Page 205
system (ECU and sensors) Curtain shield airbag sensors Front passenger's seat belt buckle switch SRS warning light Driver airbag Side and curtain shield airbag sensors Driver's seat belt buckle switch Driver's seat position sensor Driver knee airbag Front airbag sensors Airbag sensor assembly "AIR - 2012 Toyota Sienna | Owners Manual - Page 206
designed based on US motor vehicle safety standards (FMVSS208). The airbag system controls airbag deployment power for the driver and front passenger. The driver airbag system consists of the driver seat's position sensor etc. The front passenger's airbag system consists of the front passenger - 2012 Toyota Sienna | Owners Manual - Page 207
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 208
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 209
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 210
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 211
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 212
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 213
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 214
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 215
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 216
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 217
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 218
classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. 1 Before driving SRS warning light Front passenger's seat belt reminder light "AIR BAG OFF" indicator light "AIR BAG ON" indicator light 183 - 2012 Toyota Sienna | Owners Manual - Page 219
1-7. Safety information Conditions and operation of the front passenger occupant classification system - 2012 Toyota Sienna | Owners Manual - Page 220
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 221
restraint system on the front passenger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P.190) *5: In case the indicator light is not illuminated, consult this manual on how to install the child restraint system properly - 2012 Toyota Sienna | Owners Manual - Page 222
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 223
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 224
and Canada now require the use of child restraint systems. 1 Before driving Points to remember Studies have shown that installing a child restraint system on a rear seat is much safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and - 2012 Toyota Sienna | Owners Manual - Page 225
1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat 190 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 226
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 227
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 228
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 229
t y inform a t ion I nst a lling child re st ra int s Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be - 2012 Toyota Sienna | Owners Manual - Page 230
1-7. Safety information Third seats Child restraint LATCH anchors LATCH anchors are provided for center seat. (Buttons displaying the location of the anchors are attached to the seats.) 1 Before driving - 2012 Toyota Sienna | Owners Manual - Page 231
1-7. Safety information Second seats (8-passenger models) Anchor brackets are provided for second outside seats. Second seats (7-passenger models) Anchor brackets are provided for both second seats. Third seats An anchor bracket is provided for center seat. 196 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 232
1-7. Safety information Installation with LATCH system (second seat) STEP 1 Fold the seatback while pulling the lever and move to the rearmost recline position. 1 Before driving STEP 2 Widen the gap between the seat cushion and seatback slightly. Type A STEP 3 Latch the buckles onto the - 2012 Toyota Sienna | Owners Manual - Page 233
a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only 198 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 234
1-7. Safety information Installation with LATCH system (third seat) Manual seat STEP 1 1st lock position 11th lock position Fold the seatback while pulling the strap. Return the seatback and secure it at the 1st lock position ( - 2012 Toyota Sienna | Owners Manual - Page 235
top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only Type B STEP 3 Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has - 2012 Toyota Sienna | Owners Manual - Page 236
1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) - 2012 Toyota Sienna | Owners Manual - Page 237
1-7. Safety information STEP 4 While pushing the child restraint system down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check - 2012 Toyota Sienna | Owners Manual - Page 238
and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended. 1 Before driving STEP 4 While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has - 2012 Toyota Sienna | Owners Manual - Page 239
1-7. Safety information - 2012 Toyota Sienna | Owners Manual - Page 240
1-7. Safety information Child restraint systems with a top tether strap (second seat) STEP 1 * Secure the child restraint system using the seat belt or LATCH anchors, and adjust the head restraint to the uppermost position. 1 Before driving *: Ottoman seat only STEP 2 Latch the hook onto the - 2012 Toyota Sienna | Owners Manual - Page 241
1-7. Safety information Child restraint systems with a top tether strap (third seat) STEP 1 Secure the child restraint system using the seat belt or LATCH anchors. Adjust the head restraint to the uppermost position. STEP 2 Latch the hook onto the anchor bracket and tighten the top tether - 2012 Toyota Sienna | Owners Manual - Page 242
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 243
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 244
1-7. Safety information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 245
1-7. Safety information 210 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 246
2 -1 . Driving proc e dure s Driving t he ve hicle The following procedures should be observed to ensure safe driving: - 2012 Toyota Sienna | Owners Manual - Page 247
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 248
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 249
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 250
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 251
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 252
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 253
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 254
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 255
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 256
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 257
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 258
2-1. Driving procedures NOTICE - 2012 Toyota Sienna | Owners Manual - Page 259
2-1. Driving procedures NOTICE - 2012 Toyota Sienna | Owners Manual - Page 260
2 -1 . Driving proc e dure s Engine (ignition) sw itch (vehicles w ithout smart key system) - 2012 Toyota Sienna | Owners Manual - Page 261
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 262
2-1. Driving procedures CAUTION - 2012 Toyota Sienna | Owners Manual - Page 263
2 -1 . Driving proc e dure s Engine (ignition) sw itch (vehicles w ith smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes "ENGINE START STOP" switch modes. - 2012 Toyota Sienna | Owners Manual - Page 264
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 265
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 266
with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the "ENGINE START STOP" switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure to turn the switch off: STEP 1 STEP 2 STEP 3 Check - 2012 Toyota Sienna | Owners Manual - Page 267
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 268
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 269
2-1. Driving procedures NOTICE - 2012 Toyota Sienna | Owners Manual - Page 270
2 -1 . Driving proc e dure s Aut om at ic t ra nsa x le Select a shift position appropriate for the driving conditions. - 2012 Toyota Sienna | Owners Manual - Page 271
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 272
2-1. Driving procedures Changing shift ranges in S mode When the shift lever is in the S position, the shift lever can be operated as follows: Upshifting Downshifting The initial shift range in S mode is set automatically to 5 or 4 according to vehicle speed. However, the initial shift range may - 2012 Toyota Sienna | Owners Manual - Page 273
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 274
2-1. Driving procedures - 2012 Toyota Sienna | Owners Manual - Page 275
2 -1 . Driving proc e dure s Tur n signa l leve r The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signal will flash until you release the lever. 2 When driving Lane - 2012 Toyota Sienna | Owners Manual - Page 276
2 -1 . Driving proc e dure s Pa rk ing bra ke U.S.A. Canada To set the parking brake, fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) - 2012 Toyota Sienna | Owners Manual - Page 277
2 -1 . Driving proc e dure s H or n To sound the horn, press on or close to the mark. 2 When driving - 2012 Toyota Sienna | Owners Manual - Page 278
speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Engine coolant temperature gauge Displays the engine coolant meters "A" and "B" can be used to record and display different distances independently. Odometer/trip meter display change button →P. 245 244 SIENNA_U (OM45477U - 2012 Toyota Sienna | Owners Manual - Page 279
Instrument cluster and information display Changing the display Pressing this button switches among odometer display, trip meter displays and Eco Driving Indicator Light setting screen. Odometer Trip meter A*1 Trip meter B*1 Eco Driving Indicator Light setting screen*2 2 *1: Pressing and holding - 2012 Toyota Sienna | Owners Manual - Page 280
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 281
2 -2 . I nst rum e nt c lust e r a nd inform a t ion displa y I ndic at ors a nd w a r ning light s The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle's various systems. - 2012 Toyota Sienna | Owners Manual - Page 282
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 283
equipped) Eco Driving Indicator Light (→P. 264) *1 "TRAC OFF" indicator (→P. 329) *1, 3 (if equipped) "PCS" warning (→P. 336) 2 When driving *1: These lights turn on when the "ENGINE START STOP" switch is turned to IGNITION ON mode (vehicles with a smart key system) or the engine switch is - 2012 Toyota Sienna | Owners Manual - Page 284
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 285
2-2. Instrument cluster and information display CAUTION - 2012 Toyota Sienna | Owners Manual - Page 286
ion displa y ∗ The multi-information display presents the driver with a variety of driving-related data, including the Air conditioning system display (→P. 388) (→P. 321) (→P. 253) Automatically displayed when the air fuel consumption and other cruising-related information. ● Intuitive parking - 2012 Toyota Sienna | Owners Manual - Page 287
744) Automatically displayed when a malfunction occurs in one of the vehicle's systems. ● Customizable features setting display (→P. 820) Switching the display 2 "INFO" button When driving "SELECT RESET" button "SETUP" button Display items Display items can be switched by pressing the "INFO - 2012 Toyota Sienna | Owners Manual - Page 288
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 289
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 290
2-2. Instrument cluster and information display STEP 3 Select the desired item by pressing the "INFO" or "SETUP" button. Press the "SELECT RESET" button to enter the setting mode. The current setting is indicated by yellow text. - 2012 Toyota Sienna | Owners Manual - Page 291
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 292
● Setting the brightness STEP 1 Select "Brightness" on the "Screen Settings" screen, and press the "SELECT RESET" button. STEP 2 Press the "INFO" or "SETUP" button to adjust the brightness. +: Brighter -: Darker Press the "SELECT RESET" button to exit the screen. 258 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 293
display ● Setting the contrast STEP 1 Select "Contrast" on the "Screen Settings" screen, and press the "SELECT RESET" button. 2 STEP 2 Press the "INFO" or "SETUP" button to adjust the contrast. +: Strengthen -: Weaken Press the "SELECT RESET" button to exit the screen. When driving - 2012 Toyota Sienna | Owners Manual - Page 294
the brightness STEP 1 Select "Brightness" on the "Screen Settings" screen, and press the "SELECT RESET" button. STEP 2 Press the "INFO" or "SETUP" button to adjust the brightness. +: Brighter -: Darker Press the "SELECT RESET" button to the exit screen. ● Setting the contrast STEP 1 Select - 2012 Toyota Sienna | Owners Manual - Page 295
the "SELECT RESET" button to exit the screen. 2 ● Setting the color STEP 1 Select "Color" on the "Screen Settings" screen, and press the "SELECT RESET" button. When driving STEP 2 Press the "INFO" or "SETUP" button to adjust the color. +: Green -: Red Press the "SELECT RESET" button to exit the - 2012 Toyota Sienna | Owners Manual - Page 296
and information display ● Setting the tone STEP 1 Select "Tone" on the "Screen Settings" screen, and press the "SELECT RESET" button. STEP 2 Press the "INFO" or "SETUP" button to adjust the tone. +: Brighter -: Darker Press the "SELECT RESET" button to exit the screen. - 2012 Toyota Sienna | Owners Manual - Page 297
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 298
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 299
2-2. Instrument cluster and information display - 2012 Toyota Sienna | Owners Manual - Page 300
The headlights, side parking lights, daytime running lights and so on turn on and off automatically (when the engine switch is in the "ON" position [vehicles without a smart key system] or the "ENGINE START STOP" switch is in IGNITION ON mode [vehicles with a smart key system]). The daytime running - 2012 Toyota Sienna | Owners Manual - Page 301
2-3. Operating the lights and wipers Off. Vehicles with the daytime running light system: The daytime running light system is on. Off. (if equipped) Vehicles with the daytime running light system: The daytime running light system is on. (if equipped) 2 When driving 267 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 302
on, push the lever away from you to turn on the high beams. When the light switch is in position, the Automatic High Beam system will be activated. (→P. 273) Pull the lever toward you to the center position to turn the high beams off. Pull the lever toward you and release it to - 2012 Toyota Sienna | Owners Manual - Page 303
2-3. Operating the lights and wipers Manual headlight headlights) leveling dial (vehicles with discharge The level of the headlight aim can be adjusted according to the number of passengers and the loading - 2012 Toyota Sienna | Owners Manual - Page 304
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 305
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 306
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 307
2 -3 . Ope ra t ing t he light s a nd w ipe rs Aut om at ic H igh Be a m ∗ The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. - 2012 Toyota Sienna | Owners Manual - Page 308
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 309
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 310
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 311
cracked or damaged. The inside rear view mirror or ca mera sensor is deformed or dirty. Surrounding brightness levels are equal to those of headlights, tail lights or fog lights. Vehicles ahead have headlights that are either switched off, dirty, are changing color, or are not aimed properly. When - 2012 Toyota Sienna | Owners Manual - Page 312
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 313
2-3. Operating the lights and wipers NOTICE - 2012 Toyota Sienna | Owners Manual - Page 314
2 -3 . Ope ra t ing t he light s a nd w ipe rs Fog light sw it ch ∗ The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. Type A Turns the front fog lights off Turns the front fog lights on ∗: If equipped 280 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 315
2-3. Operating the lights and wipers Type B Turns the front fog lights off Turns the front fog lights on 2 When driving - 2012 Toyota Sienna | Owners Manual - Page 316
2 -3 . Ope ra t ing t he light s a nd w ipe rs Windshie ld w ipe rs a nd w a she r Intermittent windshield wipers with interval adjuster The wiper operation is selected by moving the lever as - 2012 Toyota Sienna | Owners Manual - Page 317
2-3. Operating the lights and wipers Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. 2 Type B When driving Off Intermittent windshield wiper - 2012 Toyota Sienna | Owners Manual - Page 318
2-3. Operating the lights and wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. 284 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 319
the lights and wipers Rain-sensing windshield wipers (if equipped) When "AUTO" is selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume. When "AUTO" is selected, the sensor sensitivity - 2012 Toyota Sienna | Owners Manual - Page 320
2-3. Operating the lights and wipers Increases the sensitivity Decreases the sensitivity Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. Type B Off Rain-sensing wiper operation ("AUTO") Low speed operation High speed operation wiper - 2012 Toyota Sienna | Owners Manual - Page 321
2-3. Operating the lights and wipers Increases the sensitivity Decreases the sensitivity 2 Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. When driving 287 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 322
2-3. Operating the lights and wipers - 2012 Toyota Sienna | Owners Manual - Page 323
2-3. Operating the lights and wipers CAUTION - 2012 Toyota Sienna | Owners Manual - Page 324
2 -3 . Ope ra t ing t he light s a nd w ipe rs Re a r w indow w ipe r a nd w a she r The wiper operation is selected by moving the lever as follows: Type A Off Intermittent window wiper operation - 2012 Toyota Sienna | Owners Manual - Page 325
2-3. Operating the lights and wipers Type B Off Intermittent window wiper operation Normal window wiper operation Washer/wiper operation Washer/wiper operation dual dual 2 When driving - 2012 Toyota Sienna | Owners Manual - Page 326
2-3. Operating the lights and wipers NOTICE - 2012 Toyota Sienna | Owners Manual - Page 327
2 -4 . U sing ot he r driving syst e m s Cruise c ont rol ∗ Use cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch 2 When driving - 2012 Toyota Sienna | Owners Manual - Page 328
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 329
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 330
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 331
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 332
∗ Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehicles ahead. Display Set speed - 2012 Toyota Sienna | Owners Manual - Page 333
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 334
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 335
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 336
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 337
2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-tovehicle distance can also be set by operating the - 2012 Toyota Sienna | Owners Manual - Page 338
2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by the driver. - 2012 Toyota Sienna | Owners Manual - Page 339
2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other - 2012 Toyota Sienna | Owners Manual - Page 340
2-4. Using other driving systems Vehicles without a smart key system: If the engine switch is turned off and then turned to the "ON" position again, the vehicle will automatically return to vehicle-tovehicle distance control mode. Vehicles with a smart key system: If the "ENGINE START STOP" switch - 2012 Toyota Sienna | Owners Manual - Page 341
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 342
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 343
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 344
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 345
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 346
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 347
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 348
syst e m s I nt uit ive pa rk ing a ssist ∗ The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, the touch screen and a buzzer. Always check the surrounding area when - 2012 Toyota Sienna | Owners Manual - Page 349
2-4. Using other driving systems Display When the sensors detect an obstacle, a graphic is shown on the multi information display or touch screen depending on the position and distance to the obstacle. Multi-information display 2 When driving Touch screen (with navigation system)* *: Depending - 2012 Toyota Sienna | Owners Manual - Page 350
2-4. Using other driving systems The distance display and buzzer When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds. - 2012 Toyota Sienna | Owners Manual - Page 351
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 352
2-4. Using other driving systems Detection range of the sensors Approximately 2.0 ft. (60 cm) Approximately 2.8 ft. (85 cm) Approximately 5.9 ft. (180 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obstacles that are extremely close to the vehicle. The - 2012 Toyota Sienna | Owners Manual - Page 353
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 354
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 355
e m ∗ The rear view monitor system assists the driver by displaying an image of the area behind the vehicle while reversing. The image is displayed in reverse on the screen. This reversed image is a similar image to the one on the inside rear view mirror - 2012 Toyota Sienna | Owners Manual - Page 356
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 357
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 358
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 359
2-4. Using other driving systems When any part of the vehicle sags due to the number of passengers or the distribution of the load, there is a margin of error between the guide lines on the screen and the actual distance/course on the road. - 2012 Toyota Sienna | Owners Manual - Page 360
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 361
syst e m s Driving a ssist syst e m s To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle - 2012 Toyota Sienna | Owners Manual - Page 362
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 363
2-4. Using other driving systems Disabling TRAC and VSC system If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. - 2012 Toyota Sienna | Owners Manual - Page 364
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 365
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 366
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 367
. To engage hill-start assist control, further depress the brake pedal when the vehicle is stopped completely. A buzzer will sound once to indicate that the system is activated. The slip indicator will also start flashing. 2 When driving ∗: If equipped 333 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 368
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 369
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 370
2 -4 . U sing ot he r driving syst e m s PCS (Pre -Collision Syst e m ) ∗ When the radar sensor detects that a frontal collision is highly likely or even unavoidable, the systems such as the brakes and seat belts are automatically engaged to lessen impact to occupants as well as vehicle damage. - 2012 Toyota Sienna | Owners Manual - Page 371
2-4. Using other driving systems Disabling pre-collision braking Pre-collision braking disabled Pre-collision braking enabled The "PCS" warning light flashes when pre-collision braking is disabled. 2 When driving Radar sensor The radar sensor detects vehicles or other obstacles on or near the - 2012 Toyota Sienna | Owners Manual - Page 372
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 373
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 374
2-4. Using other driving systems - 2012 Toyota Sienna | Owners Manual - Page 375
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 376
2-4. Using other driving systems CAUTION - 2012 Toyota Sienna | Owners Manual - Page 377
about storage precautions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ● To maintain vehicle balance while driving, position luggage evenly within the luggage compartment. ● For better fuel economy, do not - 2012 Toyota Sienna | Owners Manual - Page 378
and passengers that will be riding in your vehicle. (3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. (4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five - 2012 Toyota Sienna | Owners Manual - Page 379
2-5. Driving information Example based on your vehicle Cargo capacity Total load capacity 2 When driving When 2 people with the combined weight of 366 lb. (166 kg) are riding in your vehicle, which has a total load capacity of 1660 lb. (750 kg)*, the available amount of cargo and luggage load - 2012 Toyota Sienna | Owners Manual - Page 380
2-5. Driving information Roof luggage carrier (if equipped) - 2012 Toyota Sienna | Owners Manual - Page 381
driving If removing the second seats, it is possible to load extra cargo equal to the weight of the removed seats. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) + (Weight of the removed second seats) Second seats weight: 7-passenger models Tip-up seat, fabric: 45 lb. (21 kg - 2012 Toyota Sienna | Owners Manual - Page 382
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 383
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 384
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 385
2 -5 . Driving inform a t ion Ve hicle loa d lim it s Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. - 2012 Toyota Sienna | Owners Manual - Page 386
2 -5 . Driving inform a t ion Wint e r driving t ips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. - 2012 Toyota Sienna | Owners Manual - Page 387
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 388
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 389
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 390
the towing equipment has been installed correctly and used properly, and that you employ the requisite driving habits. Vehicle-trailer stability and braking performance are affected by trailer stability, brake performance and setting, trailer brakes, the hitch and hitch systems (if equipped). To tow - 2012 Toyota Sienna | Owners Manual - Page 391
2-5. Driving information Towing related terms - 2012 Toyota Sienna | Owners Manual - Page 392
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 393
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 394
kg) AWD models: 8990 lb. (4078 kg) ● The gross vehicle weight must never exceed the GVWR indicated on the Certification Label. ● The gross axle weight on each axle must never exceed the GAWR indicated on the Certification Label. ● If the gross trailer weight is over the unbraked TWR, trailer service - 2012 Toyota Sienna | Owners Manual - Page 395
2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. - 2012 Toyota Sienna | Owners Manual - Page 396
loaded by referring to the following instructions. • Tongue Weight The gross using a weight distributing hitch when towing, return the front axle to the same weight as before the trailer connection. If front axle weight cannot be measured directly, measure the front fender height above the front - 2012 Toyota Sienna | Owners Manual - Page 397
Hitch Trailer hitch assemblies have different weight capacities. Toyota recommends the use of Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross - 2012 Toyota Sienna | Owners Manual - Page 398
2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches - 2012 Toyota Sienna | Owners Manual - Page 399
hitch receiver Hitch receiver pin hole position: 37.3 in. (949.8 mm) 2 When driving Connecting trailer lights Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle's lights. Please take care to comply with your state's laws when - 2012 Toyota Sienna | Owners Manual - Page 400
the speed limit for your trailer as set forth in your trailer owner's manual, whichever is lowest. Instability of the towing vehicle-trailer combination (trailer loss of control. ● Before starting out, check the trailer lights, tires and the vehicletrailer connections. Recheck after driving a short - 2012 Toyota Sienna | Owners Manual - Page 401
move the trailer to the right. (This is generally opposite to reversing without a trailer attached.) Avoid sharp or prolonged turning. Have someone guide you when reversing to reduce the risk of an accident. ● As stopping distance is increased when towing a trailer, vehicle-tovehicle distance should - 2012 Toyota Sienna | Owners Manual - Page 402
plenty of room before changing lanes. ● To maintain engine braking efficiency and charging system performance when using engine braking, do not or steep grade. If the Engine coolant temperature gauge overheating, immediately turn off the air conditioning (if in use), pull your vehicle off the road - 2012 Toyota Sienna | Owners Manual - Page 403
slowly until the blocks absorb the load. Apply the parking brake firmly. Shift into P and turn off the engine. 2 STEP 3 STEP 4 STEP 5 When driving ● When restarting after parking on a slope: STEP 1 With the transmission in P, start the engine. Be sure to keep the brake pedal pressed. Shift - 2012 Toyota Sienna | Owners Manual - Page 404
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 405
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 406
2-5. Driving information - 2012 Toyota Sienna | Owners Manual - Page 407
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 408
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 409
2-5. Driving information CAUTION - 2012 Toyota Sienna | Owners Manual - Page 410
2 -5 . Driving inform a t ion Dinghy t ow ing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE - 2012 Toyota Sienna | Owners Manual - Page 411
2-5. Driving information 2 When driving 377 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 412
syst e m ∗ Driver's side temperature control dial Air outlet selector buttons Front fan speed Rear temperature control dial Front air conditioning on/off switch Off Windshield defogger Passenger's side temperature control dial Rear fan speed Outside air or recirculated air mode Adjusting the - 2012 Toyota Sienna | Owners Manual - Page 413
automatically turn on and the air circulation mode will be set to recirculated air mode. When the dial is in the "MAX A/C" position, the air conditioning system cannot be turned off even if is pressed. 3 Front passenger's side temperature control dial Interior features Turn the temperature control - 2012 Toyota Sienna | Owners Manual - Page 414
3-1. Using the air conditioning system and defogger STEP 3 To change the air outlets, press . , , or Air flows as shown below according to the mode selected. Air flows to the upper body. Air flows to the upper body and feet. Air flows mainly to the feet. 382 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 415
3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. - 2012 Toyota Sienna | Owners Manual - Page 416
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 417
3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Adjusting: Direct air flow to the left or right, up or down. 3 Interior features - 2012 Toyota Sienna | Owners Manual - Page 418
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 419
3-1. Using the air conditioning system and defogger CAUTION - 2012 Toyota Sienna | Owners Manual - Page 420
setting. Control panel Changes the front air outlets used Driver's side temperature control dial Front air conditioning on/off switch Rear fan speed Changes the rear air outlets used Simultaneous mode Automatic mode Passenger's side temperature control Front fan speed Windshield defogger - 2012 Toyota Sienna | Owners Manual - Page 421
display Front fan speed display Air conditioning on indicator Rear airflow display Rear fan speed display Rear temperature setting display 3 Interior features Using the automatic mode STEP 1 Press . The air conditioning system will begin to operate. In outside air or recirculated air mode, air - 2012 Toyota Sienna | Owners Manual - Page 422
3-1. Using the air conditioning system and defogger Adjusting the settings - 2012 Toyota Sienna | Owners Manual - Page 423
3-1. Using the air conditioning system and defogger Adjusting the settings manually - 2012 Toyota Sienna | Owners Manual - Page 424
3-1. Using the air conditioning system and defogger The air outlets switch each time shown on the display indicates the following. is pressed. The air flow Air flows to the upper body. Air flows to the upper body and feet. Air flows mainly to the feet. 392 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 425
3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. - 2012 Toyota Sienna | Owners Manual - Page 426
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 427
3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Adjusting: Direct air flow to the left or right, up or down. 3 Interior features - 2012 Toyota Sienna | Owners Manual - Page 428
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 429
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 430
3 -1 . U sing t he a ir c ondit ioning syst e m a nd de fogge r Re a r m a nua l a ir c ondit ioning syst e m ∗ Changes the air outlet used Fan speed control dial Temperature control dial Adjusting the settings - 2012 Toyota Sienna | Owners Manual - Page 431
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 432
3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Direct air flow to the front or rear, up or down. NOTICE - 2012 Toyota Sienna | Owners Manual - Page 433
Fan speed control Temperature setting Automatic mode 3 Off Automatic mode indicator Changes the air outlet used Airflow display Interior features Using the automatic mode STEP 1 Press . The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted - 2012 Toyota Sienna | Owners Manual - Page 434
3-1. Using the air conditioning system and defogger Adjusting the settings - 2012 Toyota Sienna | Owners Manual - Page 435
3-1. Using the air conditioning system and defogger Air flows to the feet. - 2012 Toyota Sienna | Owners Manual - Page 436
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 437
, dew or raindrops from the outside rear view mirrors. The windshield wiper de-icer*2 is used to prevent ice from building up on the windshield and wiper blades. Vehicles with manual air conditioning system Turns the rear window and outside rear view mirror defoggers and windshield de-icer on/off - 2012 Toyota Sienna | Owners Manual - Page 438
3-1. Using the air conditioning system and defogger - 2012 Toyota Sienna | Owners Manual - Page 439
ype ∗ With navigation system Owners of models equipped with a navigation system should refer to the "NAVIGATION SYSTEM OWNER'S MANUAL". Without navigation system Type A and B: CD player with AM/FM radio Type C: CD player with changer and AM/FM radio. Type A 3 Interior features ∗: If equipped 407 - 2012 Toyota Sienna | Owners Manual - Page 440
3-2. Using the audio system Type B Type C 408 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 441
USB memory Optimal use of the audio system Using the AUX port Using the steering switches Page P. 412 P. 422 P. 431 P. 442 P. 449 P. 457 P. 462 P. 463 3 Interior features Language settings (type B and C) The language used for all voice guidance, voice recognition and messages may be changed. STEP - 2012 Toyota Sienna | Owners Manual - Page 442
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 443
3-2. Using the audio system NOTICE - 2012 Toyota Sienna | Owners Manual - Page 444
t he a udio syst e m U sing t he ra dio Type A Power Volume Station selector Seeking the frequency Adjusting the frequency (AM, FM mode) or channel (SAT mode) Changing the channel AM• SAT/FM mode buttons Scanning for receivable stations Displaying radio text messages 412 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 445
3-2. Using the audio system Type B and C Power Volume Station selector Adjusting the frequency (AM, FM mode) or channel (SAT mode) Seeking the frequency Changing the channel Silencing the sound 3 Interior features Scanning for receivable stations Selecting the preset station pages Displaying - 2012 Toyota Sienna | Owners Manual - Page 446
audio system Setting station presets (excluding XM® Satellite Radio) STEP 1 Search for desired stations by turning pressing "∧" or "∨" on . to or or STEP 2 Press and hold the button (from until you hear a beep. Type B and C: Each time or one of ) is pressed, station pages are changed. There - 2012 Toyota Sienna | Owners Manual - Page 447
3-2. Using the audio system Scanning radio stations (excluding XM® Satellite Radio) - 2012 Toyota Sienna | Owners Manual - Page 448
3-2. Using the audio system XM® Satellite Radio (if equipped) - 2012 Toyota Sienna | Owners Manual - Page 449
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 450
3-2. Using the audio system Silencing the sound (type B and C) Press . Press the button again to turn the system back on. - 2012 Toyota Sienna | Owners Manual - Page 451
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 452
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 453
feature associated with the channel at that time. No action needed. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Contact the XM® Listener Care Center - 2012 Toyota Sienna | Owners Manual - Page 454
3 -2 . U sing t he a udio syst e m U sing t he CD pla ye r Type A Power Volume CD eject Selecting a track Reverse Fast-forward Selecting a track Searching playback Random playback Repeat play Playback Displaying text messages 422 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 455
3-2. Using the audio system Type B and C Power Volume CD eject Selecting a track/fast-forwarding and reversing CD load (type C only) Selecting a track Playback/ pause 3 Playback Interior features Searching playback Repeat play CD selection Displaying text messages Random play Loading CDs - 2012 Toyota Sienna | Owners Manual - Page 456
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 457
3-2. Using the audio system Selecting a track Turn desired track. or or press "∧" or "∨" on to select the Fast forwarding and rewinding tracks Type A Press or . Type B and C Press and hold "∧" or "∨" on Scanning tracks STEP 1 . 3 Interior features Press . The first 10 seconds of each - 2012 Toyota Sienna | Owners Manual - Page 458
3-2. Using the audio system Selecting a CD (type C only) - 2012 Toyota Sienna | Owners Manual - Page 459
3-2. Using the audio system Repeat play - 2012 Toyota Sienna | Owners Manual - Page 460
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 461
3-2. Using the audio system NOTICE - 2012 Toyota Sienna | Owners Manual - Page 462
3-2. Using the audio system NOTICE - 2012 Toyota Sienna | Owners Manual - Page 463
t he a udio syst e m Pla ying M P3 a nd WM A disc s Type A Power Volume CD eject Selecting a file Reversing Fast-forwarding Selecting a folder Selecting a file 3 Playback Interior features Searching playback Repeat play Displaying text messages Random playback 431 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 464
3-2. Using the audio system Type B and C Power Volume Selecting a file/fast-forwarding and reversing CD eject CD load (type C only) Selecting a file Playback/ pause Playback Searching playback Repeat play - 2012 Toyota Sienna | Owners Manual - Page 465
3-2. Using the audio system Selecting and scanning a folder - 2012 Toyota Sienna | Owners Manual - Page 466
3-2. Using the audio system Selecting and scanning files - 2012 Toyota Sienna | Owners Manual - Page 467
3-2. Using the audio system Fast forwarding and reversing files Type A Press or . Type B and C Press and hold "∧" or "∨" on . Playing and pausing files (type B and C) Press . Random playback - 2012 Toyota Sienna | Owners Manual - Page 468
3-2. Using the audio system Repeat play - 2012 Toyota Sienna | Owners Manual - Page 469
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 470
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 471
3-2. Using the audio system ● Compatible media Media that can be used for MP3 . ● Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 .wma. 3 Interior features 439 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 472
3-2. Using the audio system ● Multi-sessions As the audio system is compatible with multi-sessions, it record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can - 2012 Toyota Sienna | Owners Manual - Page 473
the audio system ● Extensions If the file extensions .mp3 and .wma are used for files on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be U.S. and other countries. 3 Interior features NOTICE - 2012 Toyota Sienna | Owners Manual - Page 474
3 -2 . U sing t he a udio syst e m Ope rat ing a n iPod ∗ Connecting an iPod enables you to enjoy music from the vehicle speakers. - 2012 Toyota Sienna | Owners Manual - Page 475
3-2. Using the audio system Selecting a play mode STEP 1 Press menu mode. that corresponds to "BROWSE" to select iPod STEP 2 Press that corresponds to the desired play mode. - 2012 Toyota Sienna | Owners Manual - Page 476
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 477
3-2. Using the audio system Playing and pausing songs Press the . Fast-forwarding and rewinding songs Press and hold "∧" or "∨" on Shuffle playback - 2012 Toyota Sienna | Owners Manual - Page 478
3-2. Using the audio system Switching the display Press . Each time the button is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed - 2012 Toyota Sienna | Owners Manual - Page 479
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 480
3-2. Using the audio system CAUTION - 2012 Toyota Sienna | Owners Manual - Page 481
3 -2 . U sing t he a udio syst e m Ope rat ing a U SB m e m or y ∗ Connecting a USB memory enables you to enjoy music from the vehicle speakers. - 2012 Toyota Sienna | Owners Manual - Page 482
3-2. Using the audio system Selecting and scanning a folder - 2012 Toyota Sienna | Owners Manual - Page 483
3-2. Using the audio system Selecting and scanning files - 2012 Toyota Sienna | Owners Manual - Page 484
3-2. Using the audio system Random playback - 2012 Toyota Sienna | Owners Manual - Page 485
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 486
system ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using -160 (kbps) MPEG2.5: 32-160 (kbps) • Compatible channel modes: stereo, joint stereo, dual channel and monaural ● WMA file - 2012 Toyota Sienna | Owners Manual - Page 487
Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags. (The number of characters is based are used for quality or noise at the - 2012 Toyota Sienna | Owners Manual - Page 488
3-2. Using the audio system CAUTION - 2012 Toyota Sienna | Owners Manual - Page 489
3 -2 . U sing t he a udio syst e m Opt im a l use of t he a udio syst e m Type A Adjusting the sound quality and ASL 3 Type B and C Selector buttons Selector knob Interior features Menu button 457 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 490
3-2. Using the audio system Using the audio control function - 2012 Toyota Sienna | Owners Manual - Page 491
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 492
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 493
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 494
3 -2 . U sing t he a udio syst e m U sing t he AU X por t This port can be used to connect a portable audio device and listen to it using the vehicle's speakers. STEP 1 Open the cover and connect the portable audio device. STEP 2 Press or . - 2012 Toyota Sienna | Owners Manual - Page 495
che s ∗ Some audio features can be controlled using the switches on the steering wheel. Volume Power on, source select audio Radio mode: Selects a radio station CD mode: Selects a track, file (MP3 and WMA) and disc 3 Bluetooth audio mode: Selects a track and album iPod mode: Selects a song USB - 2012 Toyota Sienna | Owners Manual - Page 496
is turned on. The audio source changes as follows each time the button is pressed. If a mode cannot be used, it will be skipped. Type A: FM (1, 2) → CD player → AUX → AM → SAT (1, 2, 3) Type B and C: FM → SAT → CD player (type B) or CD changer (type C) → RSE* → Bluetooth® audio → AUX → iPod or USB - 2012 Toyota Sienna | Owners Manual - Page 497
or song STEP 1 Press to select CD, RSE, Bluetooth® audio, iPod or 3 USB memory mode. STEP 2 Press "∧" or "∨" on song. to select the desired track/file or Interior features Selecting an album STEP 1 STEP 2 Press to select Bluetooth® audio mode. until you hear a beep. Press and hold "∧" or - 2012 Toyota Sienna | Owners Manual - Page 498
Using the audio system Selecting a disc in the CD changer (type C only) STEP 1 STEP 2 Press to select the CD mode. until you hear a beep. Press and hold "∧" or "∨" on Selecting a track/file or chapter (vehicles with rear seat entertainment system) STEP 1 STEP 2 Press to select the RSE mode - 2012 Toyota Sienna | Owners Manual - Page 499
3 -2 . U sing t he a udio syst e m De t a cha ble pole a nt e nna ∗ The antenna can be removed. - 2012 Toyota Sienna | Owners Manual - Page 500
3-2. Using the audio system - 2012 Toyota Sienna | Owners Manual - Page 501
3-2. Using the audio system NOTICE - 2012 Toyota Sienna | Owners Manual - Page 502
does not support Bluetooth®, the Bluetooth® audio system will not function. Vehicles with a navigation system Owners of models equipped with a navigation system should refer to the "NAVIGATION SYSTEM OWNER'S MANUAL". Vehicles without a navigation system Title Using the Bluetooth® audio system Page - 2012 Toyota Sienna | Owners Manual - Page 503
3-3. Using the Bluetooth® audio system - 2012 Toyota Sienna | Owners Manual - Page 504
3-3. Using the Bluetooth® audio system - 2012 Toyota Sienna | Owners Manual - Page 505
3-3. Using the Bluetooth® audio system CAUTION - 2012 Toyota Sienna | Owners Manual - Page 506
3 -3 . U sing t he Blue t oot h ® a udio syst e m ® U sing t he Blue t oot h a udio syst e m - 2012 Toyota Sienna | Owners Manual - Page 507
3-3. Using the Bluetooth® audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system without the need to check the display or operate - 2012 Toyota Sienna | Owners Manual - Page 508
to register a Bluetooth® enabled portable player in the system. Follow the procedure below to register (pair) a portable player: STEP 1 Press Press until "BT AUDIO" is displayed. that corresponds to "SETUP". STEP 2 The introductory guidance and portable player name registration instructions are - 2012 Toyota Sienna | Owners Manual - Page 509
3-3. Using the Bluetooth® audio system STEP 5 Select "Confirm" using a voice command or . A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard. STEP 6 Input the passkey into the portable player. Refer to the manual that - 2012 Toyota Sienna | Owners Manual - Page 510
3-3. Using the Bluetooth® audio system Menu list of the Bluetooth® audio system - 2012 Toyota Sienna | Owners Manual - Page 511
3-3. Using the Bluetooth® audio system - 2012 Toyota Sienna | Owners Manual - Page 512
3 -3 . U sing t he Blue t oot h ® a udio syst e m ® Ope rat ing a Blue t oot h e na ble d port a ble pla ye r Power Volume Selecting a track/ fast-forwarding and reversing Selecting an album Selector buttons Playback Playback/pause Displaying text messages Selecting an album Press "∧" or "∨" on - 2012 Toyota Sienna | Owners Manual - Page 513
3-3. Using the Bluetooth® audio system Playing and pausing tracks Press . Fast-forwarding and rewinding tracks Press and hold "∧" or "∨" on Switching the display Press . . Each time the button is pressed, the display changes in the following order: Track title → Track title/Artist name → Track - 2012 Toyota Sienna | Owners Manual - Page 514
3 -3 . U sing t he Blue t oot h ® a udio syst e m ® Se t t ing up a Blue t oot h e na ble d port a ble pla ye r Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for registered portable players: - 2012 Toyota Sienna | Owners Manual - Page 515
Press the talk switch and say "List Audio Players". When the name of the desired portable player is read aloud, press the talk switch. 3 Interior features STEP 3 Press the talk switch and say "From Car" or "From Audio", and select "Confirm" by using a voice command or . 483 SIENNA_U (OM45477U - 2012 Toyota Sienna | Owners Manual - Page 516
the "ENGINE START STOP" switch is in either ACCESSORY or IGNITION ON position. If a portable player that has already been paired is selected, it is necessary to select "From Car" or "From audio" setting. Changing the registered name of a portable player STEP 1 STEP 2 Select "Change Name" using - 2012 Toyota Sienna | Owners Manual - Page 517
the following functions will become available: ● Selecting a portable player: "Select Audio Player" ● Changing a registered name: "Change Name" ● Deleting a portable player: "Delete Audio Player" Interior features 3 Changing the passkey STEP 1 STEP 2 Select "Set Passkey" using a voice command or - 2012 Toyota Sienna | Owners Manual - Page 518
is read aloud, press the talk switch. If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard. STEP 3 Select "Confirm" by using a voice command or . - 2012 Toyota Sienna | Owners Manual - Page 519
3 -3 . U sing t he Blue t oot h ® a udio syst e m ® Blue t oot h a udio syst e m se t up - 2012 Toyota Sienna | Owners Manual - Page 520
se at e nt e r t a inm e nt syst e m fe at ure s ∗ The rear seat entertainment system is designed to allow the rear passengers to enjoy audio and DVD video separately from the front audio system. Front audio system DVD player Display Headphone volume control dials and headphone jacks Power outlets - 2012 Toyota Sienna | Owners Manual - Page 521
3-4. Using the rear audio system Opening and closing the display - 2012 Toyota Sienna | Owners Manual - Page 522
3-4. Using the rear audio system Loading a disc STEP 1 Open the cover. STEP 2 Insert the disc into the slot with the label side up. The "DISC" indicator light turns on while the disc is loaded. The player will play the track or chapter, and will repeat it after it reaches the end. STEP 3 Close - 2012 Toyota Sienna | Owners Manual - Page 523
3-4. Using the rear audio system Turning the rear seat entertainment system power on/off - 2012 Toyota Sienna | Owners Manual - Page 524
a navigation system Front audio system Selecting either the front audio system or DVD player audio for the speakers Selecting "LOCK" or "UNLOCK" for the rear seat entertainment system The rear seat entertainment system lock remains on, even when the engine switch is turned off. DVD player display - 2012 Toyota Sienna | Owners Manual - Page 525
3-4. Using the rear audio system Adjusting and turning off the screen - 2012 Toyota Sienna | Owners Manual - Page 526
3-4. Using the rear audio system Headphone jacks To use the headphones, connect them to the jack. To adjust the volume Turn the knob clockwise to increase the volume. Turn the knob counterclockwise to decrease the volume. - 2012 Toyota Sienna | Owners Manual - Page 527
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 528
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 529
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 530
3-4. Using the rear audio system CAUTION - 2012 Toyota Sienna | Owners Manual - Page 531
3 -4 . U sing t he re a r a udio syst e m U sing t he DV D pla ye r (DV D vide o) - 2012 Toyota Sienna | Owners Manual - Page 532
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 533
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 534
3-4. Using the rear audio system NOTICE - 2012 Toyota Sienna | Owners Manual - Page 535
system Turning on the menu screen Press or select to turn on the menu screen. For the operation of the menu screen, see the separate manual for the DVD disc. Slow playback Press or select or select to pause video and then press or 3 . Video is played slowly when you press Interior features - 2012 Toyota Sienna | Owners Manual - Page 536
3-4. Using the rear audio system Searching for a title STEP 1 STEP 2 Select on the control icon screen. Input the desired title number and then select . : deletes the last input number : returns to the previous screen Changing the subtitle language STEP 1 STEP 2 Select on the control icon - 2012 Toyota Sienna | Owners Manual - Page 537
3-4. Using the rear audio system Changing the audio language STEP 1 STEP 2 Select on the control icon screen. Select to display the audio language screen. Each time you press , the next available language is selected. : returns to the previous 3 Interior features screen Changing the - 2012 Toyota Sienna | Owners Manual - Page 538
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 539
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 540
3-4. Using the rear audio system ● Multi-angle feature: Allows you to enjoy the same scene at different angles. ● Multi-language feature: Allows you to select the language of the subtitles and audio. ● Region codes: Region codes are provided on DVD players and DVD discs. If the DVD video disc does - 2012 Toyota Sienna | Owners Manual - Page 541
3 -4 . U sing t he re a r a udio syst e m U sing t he DV D pla ye r (vide o CD) - 2012 Toyota Sienna | Owners Manual - Page 542
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 543
3-4. Using the rear audio system Selecting a desired screen - 2012 Toyota Sienna | Owners Manual - Page 544
3-4. Using the rear audio system Changing the sound-multiplex mode Select each time the on the control icon screen. The mode cycles through is pressed. "Main" → "Sub" → "Main/Sub" Slow playback Press or select or select to pause video and then press or . Video is played - 2012 Toyota Sienna | Owners Manual - Page 545
3 -4 . U sing t he re a r a udio syst e m U sing t he DV D pla ye r (a udio CD/CD t ex t ) Press control screen. Repeat play to display the Random playback Search playback - 2012 Toyota Sienna | Owners Manual - Page 546
3 -4 . U sing t he re a r a udio syst e m U sing t he DV D pla ye r (WM A/M P3 disc s) - 2012 Toyota Sienna | Owners Manual - Page 547
3-4. Using the rear audio system Random playback - 2012 Toyota Sienna | Owners Manual - Page 548
. U sing t he re a r a udio syst e m U sing t he vide o m ode Press video mode. to select the Before switching to the video mode, connect the audio device to the A/V input port. Using the port Type A Open the cover. The A/V input port is composed of 3 input ports. Yellow: Image input port White - 2012 Toyota Sienna | Owners Manual - Page 549
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 550
3 -4 . U sing t he re a r a udio syst e m Cha nging t he DV D init ia l se t t ing Select to display the initial setting screen. The following initialization can be changed here. ● Audio language ● Subtitle language ● DVD language ● Angle mark ● Parental lock 518 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 551
3-4. Using the rear audio system Changing the audio language Select "Audio Language". Select the digit language code. (→P. 526) Input the desired audio language code and the select . 3 Interior features : deletes the last input number : returns to the previous screen If a code that is not - 2012 Toyota Sienna | Owners Manual - Page 552
3-4. Using the rear audio system Changing the subtitle language Select "Subtitle Language". Select the language you want to read, and press it. : returns to the previous screen to input Select "Others" - 2012 Toyota Sienna | Owners Manual - Page 553
3-4. Using the rear audio system Changing the DVD language Select "DVD Language". Select the language Enter the appropriate 4-digit language code. (→P. 526) Input the desired DVD language code and the select . 3 Interior features : deletes the last input number : returns to the previous screen - 2012 Toyota Sienna | Owners Manual - Page 554
3-4. Using the rear audio system Turning on or off the angle mark The angle mark can be turned on for discs that are multi-angle compatible. Each time you press mark turns on or off alternately. when "Angle Mark" is selected, the angle 522 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 555
3-4. Using the rear audio system Setting viewer restriction levels Setting a password allows the viewer restriction to be effective. Input the desired personal code and select . : deletes the last input number : returns to the previous screen The setting cannot be changed unless the password is - 2012 Toyota Sienna | Owners Manual - Page 556
3-4. Using the rear audio system Setting the display mode - 2012 Toyota Sienna | Owners Manual - Page 557
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 558
3-4. Using the rear audio system - 2012 Toyota Sienna | Owners Manual - Page 559
3-4. Using the rear audio system Code 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1001 1009 1023 1101 , Pushto Quechua Rhaeto-Romance Kirundi Romanian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Sinhalese Slovak Slovenian Samoan 3 Interior features 527 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 560
3-4. Using the rear audio system Code 1914 1915 1917 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 Language Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Code 2014 2015 2018 2019 2020 2023 2111 2118 - 2012 Toyota Sienna | Owners Manual - Page 561
supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone to the system, and without operating the cellular phone. With navigation system Owners of models equipped with a navigation system should refer to the "NAVIGATION SYSTEM OWNER'S MANUAL - 2012 Toyota Sienna | Owners Manual - Page 562
3-5. Using the hands-free phone system (for cellular phone) Title Using the hands-free phone system Page - 2012 Toyota Sienna | Owners Manual - Page 563
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 564
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 565
3-5. Using the hands-free phone system (for cellular phone) CAUTION - 2012 Toyota Sienna | Owners Manual - Page 566
3 -5 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Using the hands-free phone system (for cellular phone) ∗ - 2012 Toyota Sienna | Owners Manual - Page 567
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 568
3-5. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the handsfree phone system without checking the display or operating - 2012 Toyota Sienna | Owners Manual - Page 569
or . 3 Register a phone name by either of the following methods. a. Select "Record Name" using registered. b. Press the talk switch and say a name to be registered. , and say a name to be Interior features A voice guidance instruction to confirm the input is heard. STEP 4 Select "Confirm - 2012 Toyota Sienna | Owners Manual - Page 570
to the hands-free phone system and Bluetooth® audio system at the same time STEP 5 Select "Internal Audio (Int, Audio)" using a voice command or . STEP 6 Select "Confirm" by using a voice command or . A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey - 2012 Toyota Sienna | Owners Manual - Page 571
3-5. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system - 2012 Toyota Sienna | Owners Manual - Page 572
system (for cellular phone) First menu Second menu Third menu "Set PIN" Operation detail Setting a PIN code Locking the phone book Unlocking the phone book Registering the cellular phone to be used Changing Unlock" "Pair Phone" "Change Name" "Delete Phone" "Setup" "Phone Setup" "List Phones" " - 2012 Toyota Sienna | Owners Manual - Page 573
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 574
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 575
3 -5 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) M a k ing a phone c a ll - 2012 Toyota Sienna | Owners Manual - Page 576
3-5. Using the hands-free phone system (for cellular phone) Dialing by inputting a number STEP 1 methods: a. Press the off- hook switch. b. Press the talk switch and say "Dial". c. Select "Dial" using . Dialing by inputting a name STEP 1 STEP 2 Press the talk switch and say "Dial by name". Select - 2012 Toyota Sienna | Owners Manual - Page 577
3-5. Using the hands-free phone system (for cellular phone) Speed dialing STEP 1 STEP 2 Press the off-hook switch. Press the preset button in which the desired number is registered. Press the off-hook switch. STEP 3 When receiving a phone call - 2012 Toyota Sienna | Owners Manual - Page 578
-free phone system (for cellular phone) Using the call history memory Follow the procedure below to use a number stored in the call history memory: STEP 1 Press the talk switch and say "Redial" (when using a number stored in the outgoing call history memory) or "Call back" (when using a number - 2012 Toyota Sienna | Owners Manual - Page 579
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 580
3 -5 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Se t t ing a c e llula r phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for registered cellular phones: - 2012 Toyota Sienna | Owners Manual - Page 581
the hands-free phone system (for cellular phone) Registering a cellular phone Select "Pair Phone" using a voice command or procedure for registering a cellular phone. (→P. 537) Selecting the cellular phone to be used , and do the STEP 1 Select "Select Phone" using a voice command or . Pattern - 2012 Toyota Sienna | Owners Manual - Page 582
the hands-free phone system (for cellular phone) Changing a registered name STEP 1 STEP 2 Select "Change Name" using a voice command or . Select the name of the cellular phone to be changed by one of the following methods: a. Press the talk switch and say the desired phone name, and select - 2012 Toyota Sienna | Owners Manual - Page 583
and the following functions will be available Selecting a cellularphone: "Select Phone" Changing a registered name: "Change Name" Deleting a cellular phone: "Delete Phone" 3 Interior features Deleting a cellular phone STEP 1 STEP 2 Select "Delete Phone" using a voice command or . Select the - 2012 Toyota Sienna | Owners Manual - Page 584
the hands-free phone system (for cellular phone) Changing the passkey STEP 1 STEP 2 Select "Set Passkey" using a voice command or . Press the talk switch, say a 4 to 8-digit number, and select "Confirm" using a voice command or The number should be input 1 digit at a time. . STEP 3 When - 2012 Toyota Sienna | Owners Manual - Page 585
3 -5 . U sing t he ha nds-fre e phone syst e m (for c e llula r phone ) Se c urit y a nd syst e m se t up To enter the menu of each setting, follow the steps below: - 2012 Toyota Sienna | Owners Manual - Page 586
3-5. Using the hands-free phone system (for cellular phone) Setting or changing the PIN - 2012 Toyota Sienna | Owners Manual - Page 587
or : a. Press the talk switch and say the registered PIN. b. Input a registered PIN using Setting voice guidance volume . 3 Interior features STEP 1 STEP 2 Select "Guidance Volume" using Change the voice guidance volume. To decrease the volume: Turn . counterclockwise. To increase the volume - 2012 Toyota Sienna | Owners Manual - Page 588
the hands-free phone system (for cellular phone) Displaying the Bluetooth® device address and name STEP 1 Select "Device Name" using . STEP 2 Turn name. to display the Bluetooth® device address and STEP 3 Select "Go Back" using to return to "System Setup". Initialization STEP 1 Select - 2012 Toyota Sienna | Owners Manual - Page 589
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 590
"Phonebook" → 2. "Change Name" ● Deleting registered data 1. "Phonebook" → 2. "Delete Entry" ● Deleting speed dial 1. "Phonebook" → 2. "Delete Speed Dial (Del Spd Dial)" ● Listing the registered data 1. "Phonebook" → 2. "List Names" Adding a new phone number The following methods can be used to add - 2012 Toyota Sienna | Owners Manual - Page 591
3-5. Using the hands-free phone system (for cellular phone) - 2012 Toyota Sienna | Owners Manual - Page 592
the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1: Select "Manual Input" using . STEP2-2: Input a phone number using once again. Input the phone number 1 digit at a time. , and press Selecting a phone number from outgoing or incoming call history STEP2 - 2012 Toyota Sienna | Owners Manual - Page 593
system (for cellular phone) STEP 3 Select the name to be registered by either of the following methods, and select "Confirm" using a voice command or : a. Press the talk switch and say the desired name. b. Select "Record Name" using name. , and say the desired STEP 4 Select "Confirm" using - 2012 Toyota Sienna | Owners Manual - Page 594
the hands-free phone system (for cellular phone) Setting speed dials STEP 1 Select "Set Speed Dial (Speed Dial)" using a voice command or following methods: a. Press the talk switch, say desired name, and select "Confirm" using a voice command or . b. Press the talk switch, and say "List names". - 2012 Toyota Sienna | Owners Manual - Page 595
the hands-free phone system (for cellular phone) Changing a registered name STEP 1 STEP 2 Select "Change Name" using a voice command or . Select the name to be changed by one of the following methods. a. Press the talk switch, say desired name, and select "Confirm" using a voice command or - 2012 Toyota Sienna | Owners Manual - Page 596
the hands-free phone system (for cellular phone) Deleting registered data STEP 1 STEP 2 Select "Delete Entry" using a voice command or . Select the data to be deleted by either of the following methods, and select "Confirm" using a voice command or : a. Press the talk switch, and say the name - 2012 Toyota Sienna | Owners Manual - Page 597
" using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to "Phonebook". Pressing the talk switch while the desired data is being read aloud selects the data, and the following functions will be available Dialing: "Dial" Changing - 2012 Toyota Sienna | Owners Manual - Page 598
he int e rior light s I nt e rior light s list Outer foot lights (if equipped) Rear interior light Rear personal/interior lights (→P. 569) Rear ceiling lights (if equipped) (→P. 570) Front personal/interior lights (→P. 568) Engine switch light (if equipped) Front door courtesy lights (if equipped - 2012 Toyota Sienna | Owners Manual - Page 599
Using the interior lights Personal/interior light main switch Personal/interior light main switch (vehicles with overhead console) Type A On Push rior lights. The personal/interior lights cannot be individually turned off with this switch. to activate the inte- Door position Type B When door mode - 2012 Toyota Sienna | Owners Manual - Page 600
3-6. Using the interior lights Personal/interior lights Personal/interior lights (vehicles with overhead console) Front type A On/off Front type B 568 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 601
individual light is activated it must be turned off at its location. It will not turn off immediately once the doors are closed. To conserve your battery any interior lights left on will turn off 20 minutes after engine off. These lights will come back on with engine on. 3 Interior features 569 - 2012 Toyota Sienna | Owners Manual - Page 602
3-6. Using the interior lights Personal lights and rear ceiling lights Personal lights (vehicles without overhead console) Front On/off Rear On/off Rear ceiling lights (if equipped) On/off 570 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 603
3-6. Using the interior lights - 2012 Toyota Sienna | Owners Manual - Page 604
3 -7 . U sing t he st ora ge fe a t ure s List of st ora ge fe at ure s Auxiliary boxes Cup holders Door pockets Bottle holders Overhead console (if equipped) Glove boxes Console box (if equipped) 572 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 605
3-7. Using the storage features Glove boxes CAUTION - 2012 Toyota Sienna | Owners Manual - Page 606
3-7. Using the storage features Glove boxes Lower glove box The lower glove box can be opened by pulling the lever and can be locked and unlocked by using the master key (vehicles without a smart key) or the mechanical key (vehicles with a smart key system). Unlock Lock Open - 2012 Toyota Sienna | Owners Manual - Page 607
3-7. Using the storage features Console box Console box (if equipped) - 2012 Toyota Sienna | Owners Manual - Page 608
3-7. Using the storage features Console box - 2012 Toyota Sienna | Owners Manual - Page 609
3-7. Using the storage features Console box CAUTION - 2012 Toyota Sienna | Owners Manual - Page 610
3-7. Using the storage features Overhead console Overhead console (if equipped) Push the lid. The overhead console is useful for temporarily storing small items. CAUTION - 2012 Toyota Sienna | Owners Manual - Page 611
3-7. Using the storage features Cup holders Cup holders Front Press in and release the front cup holder. Console box (if equipped) 3 Interior features Console box type A (if equipped) Pull the lid down. 579 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 612
3-7. Using the storage features Cup holders Console box type B (if equipped) Second center seat (if equipped) Removing the second center seat. (→P. 106) Rear 580 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 613
3-7. Using the storage features Cup holders - 2012 Toyota Sienna | Owners Manual - Page 614
3-7. Using the storage features Bottle holders Bottle holders Type A Type B 582 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 615
3-7. Using the storage features Bottle holders CAUTION - 2012 Toyota Sienna | Owners Manual - Page 616
3-7. Using the storage features Door pockets Door pockets Type A Type B NOTICE - 2012 Toyota Sienna | Owners Manual - Page 617
3-7. Using the storage features Auxiliary boxes Auxiliary boxes Type A Push down the knob. Type B (if equipped) 3 Interior features Type C 585 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 618
3-7. Using the storage features Auxiliary boxes Type D (if equipped) Type E (if equipped) Type F Lift the lid. 586 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 619
3-7. Using the storage features Auxiliary boxes Type G Removing the second center seat. (→P. 106) ITN37N026 Type H (if equipped) 3 Interior features ITN37N027 Type I (if equipped) 587 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 620
3-7. Using the storage features Auxiliary boxes Type J (if equipped) Type K (if equipped) 588 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 621
3-7. Using the storage features Auxiliary boxes - 2012 Toyota Sienna | Owners Manual - Page 622
in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward. 590 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 623
3 -8 . Ot he r int e rior fe a t ure s Va nit y m irrors Flip down. Open the cover. The light turns on when the cover is opened. NOTICE - 2012 Toyota Sienna | Owners Manual - Page 624
3 -8 . Ot he r int e rior fe a t ure s Clock ∗ Adjusts the hours. Adjusts the minutes. - 2012 Toyota Sienna | Owners Manual - Page 625
3 -8 . Ot he r int e rior fe a t ure s Conve rsat ion m ir ror ∗ The conversation mirror can provide the driver and the front passenger with a view of the rear seat area without the need to turn around. STEP 1 Push the lid and allow the lid to open. STEP 2 Push the lid. To first locked position. - 2012 Toyota Sienna | Owners Manual - Page 626
3 -8 . Ot he r int e rior fe a t ure s Pow e r out le t s The power outlet can be used for the following components: 12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W - 2012 Toyota Sienna | Owners Manual - Page 627
3-8. Other interior features Luggage compartment - 2012 Toyota Sienna | Owners Manual - Page 628
3-8. Other interior features Power outlet socket luggage compartment - 2012 Toyota Sienna | Owners Manual - Page 629
3-8. Other interior features NOTICE - 2012 Toyota Sienna | Owners Manual - Page 630
3 -8 . Ot he r int e rior fe a t ure s Se at he at e rs ∗ For driver's seat For front passenger's seat On The indicator light comes on. Adjusts the seat temperature The further you move the dial upward, the warmer the seat becomes. - 2012 Toyota Sienna | Owners Manual - Page 631
3-8. Other interior features CAUTION - 2012 Toyota Sienna | Owners Manual - Page 632
3 -8 . Ot he r int e rior fe a t ure s Ar m re st s Front seat Pull the armrest down for use. Second seat (if equipped) Pull the armrest down for use. 600 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 633
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 634
r side sunsha de s ∗ Rear door window Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook the sunshade, quarter window Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook - 2012 Toyota Sienna | Owners Manual - Page 635
3 -8 . Ot he r int e rior fe a t ure s Groc e r y ba g hook s The hooks are designed to hang things like a grocery bag. Type A (front seatback) (if equipped) Type B (third seatback) 3 Interior features Type C (luggage compartment) Pull the hook up. 603 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 636
3-8. Other interior features Type D (luggage compartment) ITN38N036 CAUTION - 2012 Toyota Sienna | Owners Manual - Page 637
. Ot he r int e rior fe a t ure s Floor m at Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Fix the floor mat in place using the retaining hooks (clips) provided. The shape of the retaining hooks - 2012 Toyota Sienna | Owners Manual - Page 638
3-8. Other interior features CAUTION - 2012 Toyota Sienna | Owners Manual - Page 639
3 -8 . Ot he r int e rior fe a t ure s Lugga ge c om pa r t m e nt fe at ure s - 2012 Toyota Sienna | Owners Manual - Page 640
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 641
t ure s Ga ra ge door ope ne r ∗ The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other appropriate for the device. Indicator light Buttons Interior features 3 ∗: If equipped 609 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 642
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 643
3-8. Other interior features STEP 3 Test the operation of HomeLink® by pressing newly light (on the HomeLink®) flashes rapidly for 2 seconds and then remains lit. If your transmitter is the Rolling Code type, proceed to the heading "Programming a rolling code system". STEP 4 3 Interior features - 2012 Toyota Sienna | Owners Manual - Page 644
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 645
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 646
3-8. Other interior features Operating the HomeLink® Press the appropriate HomeLink® button. The HomeLink® indicator light on the HomeLink® ® button and press and hold the transmitter button until the HomeLink® indicator light changes from a slow to a rapid flash. Release the buttons. Erasing the - 2012 Toyota Sienna | Owners Manual - Page 647
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 648
3-8. Other interior features CAUTION - 2012 Toyota Sienna | Owners Manual - Page 649
3 -8 . Ot he r int e rior fe a t ure s Com pa ss ∗ The compass on the trip information display indicates the direction in which the vehicle is heading. - 2012 Toyota Sienna | Owners Manual - Page 650
3-8. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth's magnetic field. The amount of deviation varies - 2012 Toyota Sienna | Owners Manual - Page 651
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 652
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 653
3-8. Other interior features NOTICE - 2012 Toyota Sienna | Owners Manual - Page 654
service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Toyota's designated response center, which operates 24 hours per day, 7 days per week. Safety Connect service is available - 2012 Toyota Sienna | Owners Manual - Page 655
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 656
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 657
(vehicles without a smart key system) or the "ENGINE START STOP" switch is turned to IGNITION ON mode (vehicles with a smart key system), the red indicator light comes on for 2 seconds then turns off. Afterward, the green indicator light comes on, indicating that the service is active. The following - 2012 Toyota Sienna | Owners Manual - Page 658
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 659
3-8. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. - 2012 Toyota Sienna | Owners Manual - Page 660
3-8. Other interior features - 2012 Toyota Sienna | Owners Manual - Page 661
body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water. ● Wax the vehicle when the waterproof coating - 2012 Toyota Sienna | Owners Manual - Page 662
4-1. Maintenance and care - 2012 Toyota Sienna | Owners Manual - Page 663
4-1. Maintenance and care CAUTION - 2012 Toyota Sienna | Owners Manual - Page 664
4-1. Maintenance and care NOTICE - 2012 Toyota Sienna | Owners Manual - Page 665
4-1. Maintenance and care NOTICE - 2012 Toyota Sienna | Owners Manual - Page 666
4 -1 . M a int e na nc e a nd c a re Cle a ning a nd prot e c t ing t he ve hicle int e rior The following procedures will help protect your vehicle's interior and keep it in top condition: - 2012 Toyota Sienna | Owners Manual - Page 667
4-1. Maintenance and care - 2012 Toyota Sienna | Owners Manual - Page 668
4-1. Maintenance and care NOTICE - 2012 Toyota Sienna | Owners Manual - Page 669
4-1. Maintenance and care NOTICE - 2012 Toyota Sienna | Owners Manual - Page 670
4 -2 . M a int e na nc e M a int e na nc e re quire m e nt s To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner's responsibility to perform regular checks. Toyota recommends performing the following maintenance: - 2012 Toyota Sienna | Owners Manual - Page 671
4-2. Maintenance - 2012 Toyota Sienna | Owners Manual - Page 672
4-2. Maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 673
or "Owner's Manual Supplement/Scheduled Maintenance Guide". It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Battery Brake fluid Engine coolant Engine oil Exhaust system Check points - 2012 Toyota Sienna | Owners Manual - Page 674
slope with the shift lever in P, is the vehicle securely stopped? • Does the brake pedal move smoothly? • Does the brake pedal have appropriate clearance from the floor? • Does the brake pedal have the correct amount of free play? • The vehicle should not pull to one side when the brakes are applied - 2012 Toyota Sienna | Owners Manual - Page 675
properly? • Do all the lights come on? • Are the headlights aimed correctly? • Does the parking brake lever or pedal move smoothly? • When parked on a slope with the parking brake on, is the vehicle securely stopped? • Do the seat belts operate smoothly? • The seat belts should not be damaged - 2012 Toyota Sienna | Owners Manual - Page 676
4-2. Maintenance Vehicle exterior Items Doors Engine hood Check points • Do the doors operate smoothly? • Does the engine hood lock system work properly? • There should not be any signs of fluid leakage after the vehicle has been parked. Fluid leaks Tires • Is the tire inflation pressure correct - 2012 Toyota Sienna | Owners Manual - Page 677
4 -2 . M a int e na nc e Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. - 2012 Toyota Sienna | Owners Manual - Page 678
paper towel • Funnel (used only for adding brake fluid) • "Toyota Super Long Life Coolant" or similar high quality ethylene glycol based non-silicate, nonamine, water. • Funnel (used only for adding engine coolant) 4 Maintenance and care Engine coolant level (→P. 662) 647 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 679
screwdriver • Wrench ⎯ Engine oil level (→P. 657) Fuses (→P. 696) Light bulbs (→P. 709) Radiator and condenser (→P. 664) Tire inflation pressure (→P. 683) • Tire pressure gauge • Compressed air source • Water or washer fluid containing antifreeze (for winter use) • Funnel (used only for - 2012 Toyota Sienna | Owners Manual - Page 680
4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: - 2012 Toyota Sienna | Owners Manual - Page 681
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 682
vehicle to open the hood. STEP 1 Pull the hood release lever. The hood will pop up slightly. STEP 2 Pull up the auxiliary catch lever and lift the hood. 4 Maintenance and care STEP 3 Hold the hood open by inserting the supporting rod into the slot. 651 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 683
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 684
4 -3 . Do-it -yourse lf m a int e na nc e Posit ioning a floor ja ck When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. - 2012 Toyota Sienna | Owners Manual - Page 685
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 686
4 -3 . Do-it -yourse lf m a int e na nc e Engine c om pa r t m e nt 1AR-FE engine 4 Washer fluid tank (→P. 671) Engine oil level dipstick (→P. 657) Engine oil filler cap (→P. 659) Engine coolant reservoir (→P. 662) Brake fluid reservoir (→P. 665) Fuse box Battery Condenser Radiator (→P. 696) - 2012 Toyota Sienna | Owners Manual - Page 687
4-3. Do-it-yourself maintenance 2GR-FE engine Washer fluid tank (→P. 671) Engine oil filler cap (→P. 659) Engine oil level dipstick (→P. 657) Engine coolant reservoir (→P. 662) Brake fluid reservoir (→P. 665) Fuse box Battery Condenser Radiator (→P. 696) (→P. 667) (→P. 664) (→P. 664) Electric - 2012 Toyota Sienna | Owners Manual - Page 688
4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. - 2012 Toyota Sienna | Owners Manual - Page 689
4-3. Do-it-yourself maintenance STEP 6 Wipe the dipstick and reinsert it fully. 1AR-FE engine Low Full 2GR-FE engine 658 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 690
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 691
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 692
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 693
4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the "FULL" and "LOW" lines on the reservoir when the engine is cold. Reservoir cap "FULL" "LOW" If the level is on or below the "LOW" line, add coolant up to the "FULL" line. - 2012 Toyota Sienna | Owners Manual - Page 694
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 695
4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. CAUTION - 2012 Toyota Sienna | Owners Manual - Page 696
4-3. Do-it-yourself maintenance Brake fluid - 2012 Toyota Sienna | Owners Manual - Page 697
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 698
4-3. Do-it-yourself maintenance Battery Check the battery as follows: - 2012 Toyota Sienna | Owners Manual - Page 699
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 700
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 701
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 702
4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the low washer fluid warning light comes on, the washer tank may be empty. Add washer fluid. CAUTION - 2012 Toyota Sienna | Owners Manual - Page 703
4 -3 . Do-it -yourse lf m a int e na nc e T ire s Replace or rotate tires in accordance with maintenance schedules and treadwear. - 2012 Toyota Sienna | Owners Manual - Page 704
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 705
valve and transmitter ID codes registered by your Toyota dealer. (→P. 676) Initializing the tire pressure warning system When the tire size is changed, the tire pressure warning system must be initialized. When the tire pressure warning system is initialized, the current tire inflation pressure is - 2012 Toyota Sienna | Owners Manual - Page 706
to the "ON" position (vehicles without a smart key system) or "ENGINE START STOP" switch to IGNITION ON mode (vehicles with a smart key system). Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times. STEP 4 4 Maintenance and care STEP - 2012 Toyota Sienna | Owners Manual - Page 707
4-3. Do-it-yourself maintenance Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer. - 2012 Toyota Sienna | Owners Manual - Page 708
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 709
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 710
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 711
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 712
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 713
4-3. Do-it-yourself maintenance NOTICE - 2012 Toyota Sienna | Owners Manual - Page 714
4 -3 . Do-it -yourse lf m a int e na nc e T ire inflat ion pre ssure - 2012 Toyota Sienna | Owners Manual - Page 715
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 716
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 717
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 718
4 -3 . Do-it -yourse lf m a int e na nc e Whe e ls If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. - 2012 Toyota Sienna | Owners Manual - Page 719
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 720
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 721
4 -3 . Do-it -yourse lf m a int e na nc e Air c ondit ioning filt e r The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. - 2012 Toyota Sienna | Owners Manual - Page 722
4-3. Do-it-yourself maintenance STEP 5 Remove the filter. The "↑UP" marks shown on the filter should be pointing up. - 2012 Toyota Sienna | Owners Manual - Page 723
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 724
4 -3 . Do-it -yourse lf m a int e na nc e Wire le ss re mot e c ont rol/e le c t ronic ke y bat t e r y Replace the battery with a new one if it is discharged. - 2012 Toyota Sienna | Owners Manual - Page 725
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 726
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 727
as necessary. STEP 1 Vehicles without a smart key system Turn the engine switch off. Vehicles with a smart key system Turn the "ENGINE START STOP" switch OFF. STEP 2 Open the fuse box cover. Engine compartment Push the tab in and lift the lid off. Driver's side instrument panel Remove the lid - 2012 Toyota Sienna | Owners Manual - Page 728
4-3. Do-it-yourself maintenance STEP 3 After a system failure, see "Fuse layout and amperage ratings" (→P. 699) for details about which fuse to check. Take out the pullout tool. Only type A fuses can be removed using the pullout tool. STEP 4 STEP 5 Check if the fuse has blown. Type A Normal - 2012 Toyota Sienna | Owners Manual - Page 729
4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer. Type E Normal fuse Blown fuse Contact your Toyota dealer. 698 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 730
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings - 2012 Toyota Sienna | Owners Manual - Page 731
(high beam) Spare-fuse Spare-fuse Spare-fuse A/C magnetic clutch Inverter PTC heater PTC heater PTC heater Rear air conditioning system Power back door Power third seat Air conditioning system Pre-collision seat belt AUTO ACCESS SEAT 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 EFI NO.2 H-LP RH - 2012 Toyota Sienna | Owners Manual - Page 732
10 A 30 A 30 A 30 A 40 A 40 A 30 A 30 A Circuit Electric cooling fans Turn signal lights, gauges and meters Rear seat entertainment system Outside rear view mirror control, outside rear view mirror heaters Audio system Vehicle dynamics integrated management, ABS, vehicle stability control Starting - 2012 Toyota Sienna | Owners Manual - Page 733
angle sensor, auto-anti glare inside rear view mirror, AUTO ACCESS SEAT remote control, front passenger occupant classification system Multiport fuel injection system/ sequential multiport fuel injection system Multiport fuel injection system/ sequential multiport fuel injection system Steering - 2012 Toyota Sienna | Owners Manual - Page 734
system/ sequential multiport fuel injection system, "IG NO.2" and "IG2" fuses Air conditioning system Multiplex communication system, starting system Multiport fuel injection system/ sequential multiport fuel injection system, "ECT" and "EFI NO.2" fuses Smart key system Daytime running light system - 2012 Toyota Sienna | Owners Manual - Page 735
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 736
4WD, intuitive parking assist, auto anti-glare inside rear view mirror, pre-collision seat belt, outside rear view mirror, seat heater, TPMS, yaw rate & G sensor, steering angle sensor, AUTO ACCESS SEAT, main body ECU Rear power windows (left-side) Power door lock system Power front seat (right-side - 2012 Toyota Sienna | Owners Manual - Page 737
fuel injection system, SRS airbag system, front passenger occupant classification system, steering lock system, smart key system, starting system, fuel pump Air conditioning system, navigation system, front passenger's seat belt reminder light, audio system, steering switch, intuitive parking - 2012 Toyota Sienna | Owners Manual - Page 738
Windshield wiper Windshield washer Rear window wiper Rear window washer Air conditioning system Shift lock system, multiport fuel injection system/sequential multiport fuel injection system Pre-collision system, pre-collision seat belt, dynamic radar cruise control, electric power steering, rain - 2012 Toyota Sienna | Owners Manual - Page 739
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 740
4 -3 . Do-it -yourse lf m a int e na nc e Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other - 2012 Toyota Sienna | Owners Manual - Page 741
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 742
4-3. Do-it-yourself maintenance STEP 3 Turn the bulb base counterclockwise. - 2012 Toyota Sienna | Owners Manual - Page 743
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 744
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 745
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 746
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 747
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 748
4-3. Do-it-yourself maintenance - 2012 Toyota Sienna | Owners Manual - Page 749
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 750
4-3. Do-it-yourself maintenance CAUTION - 2012 Toyota Sienna | Owners Manual - Page 751
4-3. Do-it-yourself maintenance 720 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 752
5 -1 . Esse nt ia l inform a t ion Em e rge ncy fla she rs Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE - 2012 Toyota Sienna | Owners Manual - Page 753
a towing dolly or flat bed truck. AWD models: If towing your vehicle with a wheel-lift type truck, use a towing dolly. (→P. 724, 726) Before towing The following may indicate a problem with your transaxle. Contact your Toyota dealer before towing. ● The engine is running but the vehicle will not - 2012 Toyota Sienna | Owners Manual - Page 754
5-1. Essential information Towing with a sling-type truck Do not tow with a sling type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. 724 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 755
5-1. Essential information From the front (AWD models) Use a towing dolly under the rear wheels. From the rear Use a towing dolly under the front wheels. Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the - 2012 Toyota Sienna | Owners Manual - Page 756
5-1. Essential information NOTICE - 2012 Toyota Sienna | Owners Manual - Page 757
5 -1 . Esse nt ia l inform a t ion I f you t hink som e t hing is w rong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. - 2012 Toyota Sienna | Owners Manual - Page 758
below to restart the engine after the system is activated. Vehicles without a smart key system STEP 1 STEP 2 Turn the engine switch to the "ACC" or "LOCK" position. Restart the engine. Vehicles with a smart key system STEP 1 Turn the "ENGINE START STOP" switch to ACCESSORY mode or turn it off - 2012 Toyota Sienna | Owners Manual - Page 759
a possible problem in the brake system. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* • Low brake fluid • Malfunction in the brake system This light also comes on when the parking brake is - 2012 Toyota Sienna | Owners Manual - Page 760
in: • The electronic engine control system; • The electronic throttle control system; or • The electronic automatic transaxle control system SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner - 2012 Toyota Sienna | Owners Manual - Page 761
disabled. (→P. 337) • The light will turn on when the system cannot temporarily be used. Slip indicator light Indicates a malfunction in: • Enhanced VSC • TRAC The indicator will blink when the system listed above is operational. (→P. 328) 5 (comes on or flashes) When trouble arises 731 SIENNA_U - 2012 Toyota Sienna | Owners Manual - Page 762
(if equipped) Indicates a malfunction in the Automatic High Beam system (→P. 273) Cruise control indicator light (if equipped) Indicates a malfunction in the cruise control system (→P. 293, 298) Radar cruise control indicator light (if equipped) Indicates a malfunction in the Dynamic radar cruise - 2012 Toyota Sienna | Owners Manual - Page 763
and the warning light comes on and flashes to indicate that the master warning system has detected a malfunction. Correction procedure Check that all the doors are closed. Refuel the vehicle. Fasten the seat belt. 5 (on the center panel) Fasten the seat belt. When trouble arises →P. 744 733 - 2012 Toyota Sienna | Owners Manual - Page 764
checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (→P. 740) Low windshield washer fluid warning light Low level of washer fluid Have the system checked by your Toyota dealer. Fill the tank. 734 SIENNA_U (OM45477U - 2012 Toyota Sienna | Owners Manual - Page 765
warning light (if equipped) Indicates that the third seat operation is not yet complete. Correction procedure If necessary, perform maintenance. (U.S.A.) Perform the necessary maintenance. Please reset the maintenance is performed. (→P. 640) 5 Complete the third seat operation. When trouble - 2012 Toyota Sienna | Owners Manual - Page 766
(AWD models) Drop your speed or stop the vehicle until the light stops blinking. (Do not stop the engine.) Have the system checked by your Toyota dealer. *1:Open door warning buzzer: A buzzer will sound if the vehicle reaches a speed of 3 mph (5 km/h) with any door open. *2:Driver's and front - 2012 Toyota Sienna | Owners Manual - Page 767
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 768
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 769
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 770
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 771
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 772
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 773
low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will system may not be able to detect or signal low tire pressure as intended. TPMS (tire pressure warning system) malfunctions may occur for a variety of reasons, including the installation - 2012 Toyota Sienna | Owners Manual - Page 774
is displa ye d ∗ The multi-information display shows warnings of system malfunctions or incorrectly performed operations. When a message is shown, perform corrections as indicated in the message. Master warning light The master warning light comes on or flashes when a message is being shown on the - 2012 Toyota Sienna | Owners Manual - Page 775
5 -2 . St e ps t o t a k e in a n e m e rge nc y If you have a flat tire (vehicles w ith run-flat tires) You can continue driving a vehicle with run-flat tires even if any tire goes flat. In this case, slow down and drive with extra caution. - 2012 Toyota Sienna | Owners Manual - Page 776
5-2. Steps to take in an emergency NOTICE - 2012 Toyota Sienna | Owners Manual - Page 777
5 -2 . St e ps t o t a k e in a n e m e rge nc y If you have a flat tire (vehicles w ith standard tires) Remove the flat tire and replace it with the spare tire provided. - 2012 Toyota Sienna | Owners Manual - Page 778
5-2. Steps to take in an emergency Taking out the jack and tools STEP 1 Remove the cover. STEP 2 Remove the adapter socket. STEP 3 Remove the jack. 748 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 779
spare tire STEP 1 Slide the front passenger's seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle. Open the right side sliding door and you will find the flap on the floor - 2012 Toyota Sienna | Owners Manual - Page 780
5-2. Steps to take in an emergency STEP 3 Attach the adapter socket over the spare tire clamp bolt. Connect the jack handle and the adapter socket. Turn the jack handle. The tire will be lowered completely to the ground. STEP 4 Take the spare tire out from underneath the vehicle and remove the - 2012 Toyota Sienna | Owners Manual - Page 781
side Left-hand side Right-hand side Wheel chock positions Behind the rear right-hand side tire Behind the rear left-hand side tire In front of the front right-hand side tire In front of the front left-hand side tire Rear STEP 2 Slightly loosen the wheel nuts (one turn). 5 When - 2012 Toyota Sienna | Owners Manual - Page 782
5-2. Steps to take in an emergency STEP 3 Turn the tire jack portion "A" by hand until the notch of the jack is in contact with the jack point. STEP 4 Raise the vehicle until the tire is slightly raised off the ground. STEP 5 Remove all the wheel nuts and the tire. When resting the tire on the - 2012 Toyota Sienna | Owners Manual - Page 783
5-2. Steps to take in an emergency Installing the spare tire STEP 1 Remove any dirt or foreign loosen while the vehicle is in motion, causing the tire to come off. STEP 2 Tapered portion Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Tighten the - 2012 Toyota Sienna | Owners Manual - Page 784
5-2. Steps to take in an emergency STEP 4 Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 76 ft• lbf (103 N• m, 10.5 kgf• m) STEP 5 Stow the flat tire, tire jack and all tools. Stowing the flat tire STEP 1 Remove clasps and strap. - 2012 Toyota Sienna | Owners Manual - Page 785
5-2. Steps to take in an emergency STEP 3 Clip clasp to outboard hook. STEP 4 Clip other clasp to center or opposite hook location. STEP 5 Pull strap to tighten and secure tire. 5 When trouble arises - 2012 Toyota Sienna | Owners Manual - Page 786
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 787
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 788
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 789
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 790
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 791
5-2. Steps to take in an emergency NOTICE - 2012 Toyota Sienna | Owners Manual - Page 792
5 -2 . St e ps t o t a k e in a n e m e rge nc y I f t he e ngine w ill not st a r t If the engine will not start even though correct starting procedures are being followed (→P. 226, 229), consider each of the following points: - 2012 Toyota Sienna | Owners Manual - Page 793
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 794
Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: STEP 1 STEP 2 Set the parking brake. Vehicles without a smart key system: Turn the engine switch to the "ACC" position. Vehicles with - 2012 Toyota Sienna | Owners Manual - Page 795
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 796
your ke ys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key number stamped on the key number - 2012 Toyota Sienna | Owners Manual - Page 797
and vehicle is interrupted (→P. 36) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened or the engine can be started by following the procedure below. Locking and unlocking the - 2012 Toyota Sienna | Owners Manual - Page 798
. Modes can be changed each time the switch is pressed. (→P. 231) To start the engine: Press the "ENGINE START STOP" switch within 10 seconds after the buzzer sounds, keeping the brake pedal depressed. In the event that the "ENGINE START STOP" switch cannot be operated, contact your Toyota dealer - 2012 Toyota Sienna | Owners Manual - Page 799
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 800
. St e ps t o t a k e in a n e m e rge nc y I f t he bat t e r y is discha rge d The following procedures may be used to start the engine if the vehicle's battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second - 2012 Toyota Sienna | Owners Manual - Page 801
5-2. Steps to take in an emergency 1AR-FE engine 2GR-FE engine 5 When trouble arises Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the clamp at - 2012 Toyota Sienna | Owners Manual - Page 802
START STOP" switch to IGNITION ON mode (vehicles with a smart key system). Once the vehicle's engine has started, remove the jumper cables in the exact reverse order from which they were connected. Vehicles with a 2GR-FE engine only: To install the engine cover, conduct the removal procedure in - 2012 Toyota Sienna | Owners Manual - Page 803
5-2. Steps to take in an emergency - 2012 Toyota Sienna | Owners Manual - Page 804
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 805
f your ve hicle ove rhe at s If your engine overheats: STEP 1 Stop the vehicle in a safe place and turn off the air conditioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine. Carefully lift the hood after the steam subsides and then restart the - 2012 Toyota Sienna | Owners Manual - Page 806
5-2. Steps to take in an emergency STEP 5 Add engine coolant if necessary. Water can be used in an emergency if engine coolant is unavailable. (→P. 790) Have the vehicle inspected at the nearest Toyota dealer as soon as possible. - 2012 Toyota Sienna | Owners Manual - Page 807
5-2. Steps to take in an emergency CAUTION - 2012 Toyota Sienna | Owners Manual - Page 808
e s st uck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP 1 Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow, or sand from around the stuck tire. Place wood, stones or some other - 2012 Toyota Sienna | Owners Manual - Page 809
5-2. Steps to take in an emergency NOTICE - 2012 Toyota Sienna | Owners Manual - Page 810
impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: STEP 1 Steadily step on the brake pedal with slowing down, stop the vehicle in a safe place by the road. Stop the engine. STEP 4 If the shift lever cannot be shifted to N STEP 3 Keep depressing - 2012 Toyota Sienna | Owners Manual - Page 811
5-2. Steps to take in an emergency STEP 4 Vehicles with a smart key system: Stop the engine by pressing and holding the "ENGINE START STOP" switch for 3 consecutive seconds or more. Press and hold for 3 seconds or more STEP 5 Stop the vehicle in a safe place by the road. CAUTION - 2012 Toyota Sienna | Owners Manual - Page 812
5-2. Steps to take in an emergency 782 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 813
width ASL30L-PFTEKA, ASL30L-PRTEKA*2 GSL30L-PRTSKA*2 Others AWD models Wheelbase Tread Front Rear ASL30L-PFTEKA* 2 2 200.2 in. (5085 lb. (610 kg) Overall height*1 2WD models ASL30L-PRTEKA* GSL30L-PFTDKA*2 1380 lb. (625 kg) GSL30L-PFTEKA*2 Vehicle capacity weight (Occupants + luggage) 1235 lb. ( - 2012 Toyota Sienna | Owners Manual - Page 814
6-1. Specifications Trailer Weight Rating (TWR) (Trailer weight + cargo weight) (with towing package) Without brake 1650 lb. (750 kg) With brake 3500 lb. (1588 kg) *1: *2: Unladen vehicle The model code is indicated on the Certification Label. For details, see "Vehicle identification" below. - 2012 Toyota Sienna | Owners Manual - Page 815
6-1. Specifications - 2012 Toyota Sienna | Owners Manual - Page 816
clearance 1AR-FE, 2GR-FE 4-cylinder in line, 4-cycle, gasoline 6-cylinder V type, 4-cycle, gasoline 3.54 × 4.13 in. (90.0 × 105.0 mm) 3.70 × 3.27 in. (94.0 × 83.0 mm) 163.1 cu.in. (2672 cm3) 210.9 cu.in. (3456 cm3) Automatic adjustment Fuel Fuel type Octane rating Fuel tank capacity (Reference - 2012 Toyota Sienna | Owners Manual - Page 817
1AR-FE engine 2GR-FE engine Without filter: 4.2 qt. (4.0 L, 3.5 Imp.qt.) With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.) Without filter: 6.0 qt. (5.7 L, 5.0 Imp.qt.) With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.) *: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm - 2012 Toyota Sienna | Owners Manual - Page 818
which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. • The 20 in 0W-20 indicates the viscosity characteristic of the oil when the to help you select the oil you should use. 6 Vehicle specifications 789 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 819
Cooling system Capacity 1AR-FE engine 2GR-FE engine 9.2 qt. (8.7 L, 7.7 Imp.qt.) Without towing package 11.0 qt. (10.4 L, 9.2 Imp.qt.) With towing package 11.7 qt. (11.1 L, 9.8 Imp.qt.) Use either of the following. • "Toyota Super Long Life Coolant" • A similar high-quality ethylene glycol-based - 2012 Toyota Sienna | Owners Manual - Page 820
Electrical system Battery 12.6 ⎯ 12.8 V Fully charged 12.2 ⎯ 12.4 V Half charged 11.8 ⎯ 12.0 V Discharged (*: Voltage checked 20 minutes after the engine and all the lights turned off) 5 A max. Open voltage* at 68°F (20°C): Charging rates Automatic transaxle Fluid capacity* 2WD models AWD models - 2012 Toyota Sienna | Owners Manual - Page 821
Gear Oil" at the factory. Use Toyota approved "Toyota Genuine Differential Gear Oil" or an equivalent oil of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details. Rear differential (AWD models) Oil capacity Oil type and viscosity 0.53 qt - 2012 Toyota Sienna | Owners Manual - Page 822
04 in. (1.0 mm) 0.04 in. (1.0 mm) 3 ⎯ 6 clicks SAE J1703 or FMVSS No.116 DOT 3 *1: *2: Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) while the engine is running Parking brake pedal travel when depressed with a force of 67.4 lbf (300 N, 30.6 kgf) Steering Free play - 2012 Toyota Sienna | Owners Manual - Page 823
Tire size Tire inflation pressure (Recommended cold tire inflation pressure) Wheel size Wheel nut torque P235/55R18 99V, P235/55RF18 99T, T155/80R17 101M (spare) Front: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Vehicles without run-flat tires: Spare: 60 psi - 2012 Toyota Sienna | Owners Manual - Page 824
19-inch tires Tire size Tire inflation pressure (Recommended cold tire inflation pressure) Wheel size Wheel nut torque P235/50R19 99V, T155/80R17 101M (spare) Front: 36 psi (250 kPa, 2.5 kgf/cm2 or bar) Rear: 36 psi (250 kPa, 2.5 kgf/cm2 or bar) Spare:60 psi (420 kPa, 4.2 kgf/cm2 or - 2012 Toyota Sienna | Owners Manual - Page 825
) Front fog lights Exterior Front turn signal/parking/side marker lights Rear turn signal lights Tail lights Back-up lights License plate lights Outer foot lights Front personal/interior lights Rear personal/interior lights Interior Luggage compartment light Vanity lights Front door courtesy lights - 2012 Toyota Sienna | Owners Manual - Page 826
. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and - 2012 Toyota Sienna | Owners Manual - Page 827
6-1. Specifications - 2012 Toyota Sienna | Owners Manual - Page 828
6-1. Specifications - 2012 Toyota Sienna | Owners Manual - Page 829
6-1. Specifications NOTICE - 2012 Toyota Sienna | Owners Manual - Page 830
6 -1 . Spe c ific a t ions T ire infor m at ion Typical tire symbols Run-flat tire or standard tire Compact spare tire 6 Vehicle specifications Tire size DOT and Tire Identification Number (TIN) Uniform tire quality grading (→P. 804) (→P. 803) For details, see "Uniform Tire Quality Grading" - 2012 Toyota Sienna | Owners Manual - Page 831
tire has a tube inside the tire and the tube maintains the air pressure. Load limit at maximum cold tire inflation pressure Maximum cold tire "M+S" is a summer tire. "TEMPORARY USE ONLY" (→P. 754) A compact spare tire is identified by the phrase "TEMPORARY USE ONLY" molded on its sidewall. This - 2012 Toyota Sienna | Owners Manual - Page 832
6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol* Tire Identification (TIN) Number Tire manufacturer's identification mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that - 2012 Toyota Sienna | Owners Manual - Page 833
6-1. Specifications Tire size - 2012 Toyota Sienna | Owners Manual - Page 834
of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. 6 - 2012 Toyota Sienna | Owners Manual - Page 835
6-1. Specifications - 2012 Toyota Sienna | Owners Manual - Page 836
6-1. Specifications - 2012 Toyota Sienna | Owners Manual - Page 837
are available as factory-installed equipment (whether installed or not) The weight of a motor vehicle with standard equipment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine The sum of: (a) Curb weight (b) Accessory - 2012 Toyota Sienna | Owners Manual - Page 838
The industry manufacturer's designation for a rim by style or code Nominal distance between rim flanges The rated cargo and luggage load plus 150 lb. (68 kg) times the vehicle's designated seating capacity The load on an individual tire that is determined by distributing to each axle its share of - 2012 Toyota Sienna | Owners Manual - Page 839
Tire related term Meaning The load on an individual tire that is determined by distributing to each axle its share of curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1* below), and dividing by two The surface area of the rim not covered - 2012 Toyota Sienna | Owners Manual - Page 840
air cavity of the tire A tire designed to operate at higher loads and at higher inflation pressures than the corresponding standard tire The space bears manufacturer, brand, and/or model name molding that is higher or manufacturer as primarily intended for use on lightweight trucks or Light truck - 2012 Toyota Sienna | Owners Manual - Page 841
which a tire is fitted for physical dimension requirements Any parting at any junction of bands or ribs A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, automotive wheel, provides the traction and contains the gas or fluid that sustains the load A pneumatic tire - 2012 Toyota Sienna | Owners Manual - Page 842
than the corresponding standard tire The linear distance between the exteriors of the sidewalls of an inflated tire, excluding elevations due the ASTM E1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Single Wheel Driving - 2012 Toyota Sienna | Owners Manual - Page 843
of wear of the tread The fixture used to hold the wheel and tire assembly securely during testing *: Table 1 ⎯ Occupant loading and distribution for vehicle normal load for various designated seating capacities Designated seating capacity, Number of occupants 2 through 4 5 through 10 Vehicle - 2012 Toyota Sienna | Owners Manual - Page 844
changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Item Function Default setting Drivers door unlocked in one step, all doors unlocked in two steps Customized setting All doors unlocked in one step Unlocking operation* Smart key system - 2012 Toyota Sienna | Owners Manual - Page 845
remote control Operation signal (Buzzer volume) Default setting On Level 7 On On Customized setting Off Level 1 to 6 Off Off Off Press twice One short press hold On Power back door operation Smart key system Number of permissible times of continuous smart lock Press and hold On Twice Smart key - 2012 Toyota Sienna | Owners Manual - Page 846
door unlocked in one step, all doors unlocked in two steps Off Customized setting All doors unlocked in one step Unlocking using a key Door lock (→P. 60) Speed-detecting automatic door lock function* Opening drivers door unlocks all doors* Shifting gears to P unlocks all doors* Shifting gears - 2012 Toyota Sienna | Owners Manual - Page 847
light system (U.S.A. only) Light sensor sensitivity Automatic High Beam (if equipped)* Default setting Off One short push Customized setting On Push and hold 0 second 30 seconds 60 seconds 90 seconds Automatic light control system (→P. 266) On Level 3 On Off Level 1 to 5 Off Alarm system - 2012 Toyota Sienna | Owners Manual - Page 848
Operation after the engine switch is turned to the "LOCK" position Rear ceiling light Outer foot lights Default setting Customized setting 7.5 seconds 15 seconds 30 seconds On Off Illumination (→P. 566) On On On Off Off Off Intuitive parking assist (→P. 314) Seat belt reminder (→P. 733 - 2012 Toyota Sienna | Owners Manual - Page 849
Customization Customizing the features by using the multi-information display STEP 1 Press the "SETUP" button while the vehicle is stopped. The "Custom previous screen. STEP 3 Select the setting you wish to change by pressing the "INFO" or "SETUP" button, and press the "SELECT RESET" button. The - 2012 Toyota Sienna | Owners Manual - Page 850
6-2. Customization STEP 4 Choose a desired setting by pressing the "INFO" or "SETUP" button, then press the "SELECT RESET" button to select. If any settings are changed, the display will revert to the previous screen. The illustration assumes that "Auto Locking" was chosen in STEP 3 . The current - 2012 Toyota Sienna | Owners Manual - Page 851
"Yes" by pressing the "INFO" or "SETUP" button, and press the "SELECT RESET" button. "Default Settings Restored" is displayed, and the default settings are restored. If you select "No" and press the "SELECT RESET" button, the display will revert to the "Custom Settings" screen without restoring the - 2012 Toyota Sienna | Owners Manual - Page 852
door (if equipped) Maintenance data (U.S.A. only) Tire pressure warning system When to initialize After reconnecting or changing the battery After reconnecting or changing the battery After the maintenance is performed When changing the tire size Reference P. 74 P. 87 P. 640 P. 674 6 Vehicle - 2012 Toyota Sienna | Owners Manual - Page 853
6-3. Initialization 824 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 854
receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To - 2012 Toyota Sienna | Owners Manual - Page 855
Seat belt instructions for Canadian ow ners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. 7 For owners 827 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 856
828 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 857
SRS airbag instructions for Canadian ow ners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. 7 For owners 829 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 858
830 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 859
7 For owners 831 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 860
832 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 861
7 For owners 833 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 862
ATTENTION - 2012 Toyota Sienna | Owners Manual - Page 863
7 For owners 835 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 864
836 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 865
7 For owners 837 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 866
838 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 867
7 For owners 839 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 868
840 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 869
ABS ACC AI-SHIFT ALR AVG AWD CRS ECO ECU EDR ELR EPS E/M GAWR GCWR GVWR 2 Wheel Drive Air Conditioning Anti-lock Brake System Accessory Artificial Intelligence Shift control Automatic Locking Retractor Average All Wheel Drive Child Restraint System Economy/Ecology Electronic Control Unit Event Data - 2012 Toyota Sienna | Owners Manual - Page 870
Emission inspection and maintenance Lower Anchors and Tethers for Children Light Emitting Diode Maximum Minimum Methylcyclopentadienyl Manganese Tricarbonyl Mud and Snow Collision System Run-Flat Tire Supplemental Restraint System Tire Identification Number Tire Pressure Warning System Traction - 2012 Toyota Sienna | Owners Manual - Page 871
P. 747 A tire punctures P. 762 If the engine will not start The engine does not start P. 159 Engine immobilizer system P. 770 If the battery is discharged The shift 60 Front doors Siding doors Back door The doors cannot be locked P. 67 P. 82 The horn begins to sound P. 162 Alarm The - 2012 Toyota Sienna | Owners Manual - Page 872
What to do if... A warning light or indicator light comes on P. 729 If a warning light turns on or a warning buzzer sounds... Instrument cluster Center display 857 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 873
What to do if... - 2012 Toyota Sienna | Owners Manual - Page 874
What to do if... 859 SIENNA_U (OM45477U) - 2012 Toyota Sienna | Owners Manual - Page 875
Fuel tank capacity (Reference) Fuel type 20.9 gal. (79 L, 17.4 Imp.gal.) Unleaded gasoline with an Octane Rating of 87 (Research Octane Number 91) Cold tire inflation pressure Engine oil capacity (Drain and refill ⎯ reference) P. 794 qt. (L, Imp.qt.) 1AR-FE engine 2GR-FE engine Without filter