2012 Toyota Tundra Navigation Manual
2012 Toyota Tundra Manual
2012 Toyota Tundra manual content summary:
- 2012 Toyota Tundra | Navigation Manual - Page 1
TUNDRA 2 0 1 2 CUSTOMER EXPERIENCE CENTER 1-800-331-4331 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 8/11 11-TCS-05003 00505-NAV12-TUN - 2012 Toyota Tundra | Navigation Manual - Page 2
- Voice Recognition SET HOME CONNECT A BLUETOOTH PHONE CALLING BY VOICE RECOGNITION Dial by Auto Screen Change Voice Recognition system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage you to review the Navigation Owner's Manual - 2012 Toyota Tundra | Navigation Manual - Page 3
MAP VOICE SAT 2 DEST SETUP INFO DISC AUX AUDIO MA WMA WM 3 PHONE LOAD . CLOSE TOYOTA DISP 7 4 5 6 station presets, adjust the balance and tone controls. CURRENT VEHICLE POSITION Mark Indicates the to change the map display between North-up or Head-up perspectives. È Ó Ç Î SETUP - 2012 Toyota Tundra | Navigation Manual - Page 4
by DEST on the faceplate followed step . 2 Touch and move to step 4. To change Search Area, touch and move to step 3. step 3 Select the desired Search Area and . touch step 4 Input the city name and touch . step 5 Touch the desired city name. step 6 Input the street name and touch - 2012 Toyota Tundra | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Touch the desired street name. step 8 Input the house number and touch . step 9 Touch . step 10 Select the desired Route Preferences by touching followed by . Touch to confirm selection. step 11 Touch guidance. to start route 4 - 2012 Toyota Tundra | Navigation Manual - Page 6
correct address in mind. The system will ask for the state, city, and street name followed by the house number as separate inputs. tip Before using voice recognition, roll up all windows and set the climate control fan on low or off to reduce background noise in the cabin. tip Speak at a normal - 2012 Toyota Tundra | Navigation Manual - Page 7
BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the beep say, "Enter" to confirm destination. step 7 Touch to start - 2012 Toyota Tundra | Navigation Manual - Page 8
or down. Touch the desired destination. Quick Tip - If the POI isn't listed in the database verify the spelling and Search Area for accuracy. step 5 Touch . step 6 Quick Tip - Touching next to the POI name will display the address and telephone number. See page 15 to select desired Route to - 2012 Toyota Tundra | Navigation Manual - Page 9
POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press DEST on the faceplate followed by . step 2 Touch . step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 Use or to scroll up or down. Touch the - 2012 Toyota Tundra | Navigation Manual - Page 10
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press on the steering wheel. After the beep say, "Destination." step 2 After the beep say, "Point of Interest." Quick Tip - If you know your next command, you can press at any time to - 2012 Toyota Tundra | Navigation Manual - Page 11
SET HOME step 1 Press by SETUP on the faceplate followed . step 2 Touch . step 3 Touch . step 4 Touch . Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch . step 6 Input - 2012 Toyota Tundra | Navigation Manual - Page 12
as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. step 9 Touch the desired street name. step 10 Input the house number and touch . step 11 Touch icon. followed by to change the home step 12 Touch the desired icon for - 2012 Toyota Tundra | Navigation Manual - Page 13
. Please refer to the cell phone manufacturer's user guide for pairing procedures. step 4 Upon connection, the system will indicate that the pairing process was successful. Quick Tip - Up to 4 Bluetooth cell phones can be paired. However, only one Bluetooth cell phone can be used at a time. 12 - 2012 Toyota Tundra | Navigation Manual - Page 14
zero, four..."). step 4 After the beep, say "Dial" or press on the steering wheel. Some Bluetooth® equipped cell phones may or may not show battery or signal strength on the display. Quick Tip - A noisy environment may prevent the voice recognition system - 2012 Toyota Tundra | Navigation Manual - Page 15
the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen. step 1 Press on the steering wheel. After the beep say, "Phone - 2012 Toyota Tundra | Navigation Manual - Page 16
selected. For example, if Toll Roads is not selected, the system will route over non-toll roads which may take longer to options. Four screen preferences are available when the map is visible and three additional are available during route guidance only. Freeway Information * Selections available - 2012 Toyota Tundra | Navigation Manual - Page 17
Time option. AUTO SCREEN CHANGE VOICE RECOGNITION GUIDANCE PRESS SETUP > PRESS SETUP > Once the screen transition is switched off, the audio screen will remain without reverting to the map display. Disables system guidance for voice commands. Only on-screen guidance will be available when - 2012 Toyota Tundra | Navigation Manual - Page 18
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME - 2012 Toyota Tundra | Navigation Manual - Page 19
system to display continuously updated traffic information for 100 markets. New TUNDRA service at the end of your complimentary trial, the plan you choose will automatically renew and bill at then-current rates until you call 1-866-635-2349 to cancel. Fees and programming subject to change. Available - 2012 Toyota Tundra | Navigation Manual - Page 20
by colored lines alongside freeway or highways: Free flow traffic Moderate traffic Heavy congestion AUTO AVOID TRAFFIC step 1 Press by SETUP on the faceplate followed . step 2 Touch . step 3 19 Select from the Auto Avoid Traffic option. Touch followed by . The system will automatically - 2012 Toyota Tundra | Navigation Manual - Page 21
within 20 miles along the current route. Touch followed by . SHOW FREE FLOWING TRAFFIC step 1 Press by SETUP on the faceplate followed . step 2 Touch . step 3 Select from the Show Free Flowing Traffic option. Touch followed by . Free flowing traffic is illustrated by arrows on the map - 2012 Toyota Tundra | Navigation Manual - Page 22
screen or listed below. Please refer to the Navigation Owner's Manual for additional information. AUDIO MODE MODE Radio AM FM FM1 FM2 Satellite Radio* Satellite Radio 1* Satellite Radio 2* Satellite Radio 3* CD CD Changer Bluetooth Audio iPod USB-Audio NAVIGATION MODE SCREEN PREFERENCES Map Dual - 2012 Toyota Tundra | Navigation Manual - Page 23
Clubs Auto Service & Maint. Car Rental Agencies Car Washes Dealerships Gas Lexus Parking Parts Stores Roadside Assistance Toyota Other Automotive Banks ATMs Full-Service Banks City Centers City Centers Stores Groceries Retail & Dept. Stores Book Stores Clothing & Shoes Department Stores Florists - 2012 Toyota Tundra | Navigation Manual - Page 24
D Map screen operation Map icons ...Current position display ...Screen scroll operation ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...D Speech command system 1 26 27 28 31 33 33 44 33 34 39 42 42 43 44 Command list ...47 25 - 2012 Toyota Tundra | Navigation Manual - Page 25
displayed and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. DEST" or "SETUP" button cannot be operated. And if the "Calendar" button on the "Information" screen is touched, the screen will change back to the " - 2012 Toyota Tundra | Navigation Manual - Page 26
11 04.21 BASIC FUNCTIONS Touch screen operation D Maintenance information This system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled - 2012 Toyota Tundra | Navigation Manual - Page 27
can be input via the touch screen. D To input letters and numbers To display the alphabet keys, touch "A−Z". INFORMATION Keyboard layout can be changed. (See page 239.) Enter letters by touching the keys directly. : Touching this button erases one letter. By holding this button, letters will - 2012 Toyota Tundra | Navigation Manual - Page 28
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the system displays "∗∗" on the screen. 29 - 2012 Toyota Tundra | Navigation Manual - Page 29
11 04.21 BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. To shift to the next or previous page. Touch or to scroll through 1. Touch "Sort". the - 2012 Toyota Tundra | Navigation Manual - Page 30
off, and change the screen to either day or night mode. D Contrast, brightness, color and tone adjustment The contrast, brightness, color and tone of The screen goes off when "Screen Off" is touched. To turn the display screen back on, push the "DISP" button again, or push the "DEST" or another - 2012 Toyota Tundra | Navigation Manual - Page 31
mode Depending on the position of the headlight switch, the screen changes to day mode or night mode. Color and tone adjustment (with rear seat entertainment system) 1. Touch the desired button to adjust color and tone. You can adjust the color and the tone while the DVD video and video CD are - 2012 Toyota Tundra | Navigation Manual - Page 32
display When starting the navigation system, the current position is vehicle position mark ( 1 ) appears in the center or bottom center of the map screen. A street name will from the GPS (Global Positioning System). If the current position is the system receives signals from the GPS, the - 2012 Toyota Tundra | Navigation Manual - Page 33
the "MAP/ VOICE" button is pushed, the current vehicle position mark returns to the center of the screen and the map moves as the vehicle proceeds along the designated route. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See - 2012 Toyota Tundra | Navigation Manual - Page 34
D To register the cursor position as an address book entry Address book entry registration enables easy access to a specific point. To change the icon or name, etc., see " (b) Editing address book entries" on page 110. Up to 100 address book entries can be registered. If there is an attempt - 2012 Toyota Tundra | Navigation Manual - Page 35
displayed. "Go to ": To delete the existing destinations and set a new one. "Add to Route": To add a destination. To register this POI as an address book entry, touch "Mark". (See page 109.) If is touched, the registered telephone number can be called. 36 - 2012 Toyota Tundra | Navigation Manual - Page 36
FUNCTIONS INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 92.) ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Touch "Info.". 37 - 2012 Toyota Tundra | Navigation Manual - Page 37
destinations and set a new one. "Add to Route": To add a destination. To edit an address book entry, touch "Edit". (See "(b) Editing address book entries" on page 110.) To delete an address book entry, touch "Delete". is touched, the registered teleIf phone number can be called. Information such as - 2012 Toyota Tundra | Navigation Manual - Page 38
screens XMr NavTraffic TEXT INFORMATION When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Any one of the screen configurations can be selected . 1. Touch this button to display the following screen. Touch "Info.". Traffic - 2012 Toyota Tundra | Navigation Manual - Page 39
11 04.21 BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 40.) : To display the dual map screen. (See page 41.) : To display the compass mode screen. (See page 41.) : To display the freeway screen. ( - 2012 Toyota Tundra | Navigation Manual - Page 40
the direction of the destination. INFORMATION When the vehicle travels out of the coverage area, the guidance screen changes to the compass mode screen. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 98 - 2012 Toyota Tundra | Navigation Manual - Page 41
changes normally. By continuing to touch the button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D - 2012 Toyota Tundra | Navigation Manual - Page 42
11 04.21 BASIC FUNCTIONS - Orientation of the map D To display building information Information is available only for buildings for which information is recorded on the map disc. The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top - 2012 Toyota Tundra | Navigation Manual - Page 43
Business facility Airport Military University Hospital Stadium Shopping mall Golf Speech command system- The speech command system enables you to operate the navigation system, audio system and hands−free system by giving a command. U004AHNS 1. Push the talk switch. After a beep sounds, the - 2012 Toyota Tundra | Navigation Manual - Page 44
desired outcome is not shown, or if no choices are available, say "Go back" or touch "Go Back" to return to the previous screen. To cancel speech command speech command cannot be recognized within 6 seconds, the voice guidance system will say "Pardon?" ("Command not recognized." will be displayed on - 2012 Toyota Tundra | Navigation Manual - Page 45
starts searching for a route to your home. To return to the "Voice Menu" screen, say "Go back" or touch "Go Back". Touch "Cancel" or say "Cancel", and the speech command system will be canceled. " Microphone (Type B) It is unnecessary to speak directly into the microphone when giving a command - 2012 Toyota Tundra | Navigation Manual - Page 46
. However, the XMr NavTraffic commands cannot be used where the XMr NavTraffic service is not available. (For details, see "XMr NavTraffic" page 98.) 1. Push the talk switch. INFORMATION In the following conditions, the system may not recognize the command properly and using speech commands may not - 2012 Toyota Tundra | Navigation Manual - Page 47
the voice recognition command list can be recognized. D Speech command example: Changing map screen 1. Push the talk switch. 2. Say "Command list". the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. When or is touched, push the - 2012 Toyota Tundra | Navigation Manual - Page 48
11 04.21 BASIC FUNCTIONS D Speech command example:Changing map scale 1. Push the talk switch. 2. Say "Command list". 3. Say "Zoom in" or "Zoom out". To confirm commands on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. - 2012 Toyota Tundra | Navigation Manual - Page 49
11 04.21 BASIC FUNCTIONS 50 - 2012 Toyota Tundra | Navigation Manual - Page 50
search by "Address" ...Destination search by "Point of Interest" ...Destination search by "Previous Destinations" ...Destination search by "Address Book" ...Destination search by "Emergency" ...Destination search by "Intersection & Freeway" ...Destination search by "Map" ...Destination search by - 2012 Toyota Tundra | Navigation Manual - Page 51
11 04.21 DESTINATION SEARCH Destination search - - Selecting the search area Change the selected region in order to set a destination from a different region by using "Address", "Point of Interest" or "Intersection & Freeway". U002AHNS Push the "DEST" button. 1. - 2012 Toyota Tundra | Navigation Manual - Page 52
11 04.21 DESTINATION SEARCH U.S.A. Button "US1" "US2" States included in the search region Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan - 2012 Toyota Tundra | Navigation Manual - Page 53
home if "OK" is touched even while driving. 2. Touch any of the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the preset destination point and the route preference. (See "Starting route guidance" on page 72.) If a preset - 2012 Toyota Tundra | Navigation Manual - Page 54
11 04.21 DESTINATION SEARCH - Destination search by "Address" There are 2 ways to search a destination by address. (a) Search by city (b) Search by street address 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Selecting a city to search 1. Push the "DEST" button. 2. - 2012 Toyota Tundra | Navigation Manual - Page 55
Input the street name and touch "OK". 8. Input a house number. 7. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If the same - 2012 Toyota Tundra | Navigation Manual - Page 56
5 Cities". 3. Touch "Street Address". 2. Touch the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See "(a) Selecting a city to search" on page 55.) 4. Touch - 2012 Toyota Tundra | Navigation Manual - Page 57
and the route preference. (See "Starting route guidance" on page 72.) If the same address exists in more than one city, the current screen changes inputting the city name or to the address list screen. 8. Touch the button of the desired city name from the displayed list. INFORMATION You can - 2012 Toyota Tundra | Navigation Manual - Page 58
the button for the desired method. 4. Input the name of the Point of Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) When inputting the name - 2012 Toyota Tundra | Navigation Manual - Page 59
11 04.21 DESTINATION SEARCH D Selecting a city to search Touch the button of the desired destination. If the same name exists in more than one city, a search can be performed more easily with "City" and "Category". (See "D Selecting a city to search" on page 60 and "D Selecting from the - 2012 Toyota Tundra | Navigation Manual - Page 60
search point from near the vehicle's current position 2. Set the search point from along the chosen route 3. Set the search point from near a city center 4. Set the search point from near a destination It is possible to display the names of POIs located within approximately 200 miles (320 km) from - 2012 Toyota Tundra | Navigation Manual - Page 61
POI Category" screen will be displayed. (See page 64.) SETTING THE SEARCH POINT FROM NEAR CITY CENTER 1. Touch "Near City Center". 2. Input the city center name. 3. Touch the button of the desired city center name. The search point is set and the "POI Category" screen will be displayed. (See page - 2012 Toyota Tundra | Navigation Manual - Page 62
21 DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES 1. Touch "Near City Center". SETTING THE SEARCH POINT FROM NEAR A DESTINATION 1. Touch "Near a Destination .) 3. Touch the button of the desired city center name. The search point is set and the "POI Category" screen will be displayed. (See page - 2012 Toyota Tundra | Navigation Manual - Page 63
screen, touch "List All Categories" to list all POI categories. 4. Input a telephone number. 5. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If there - 2012 Toyota Tundra | Navigation Manual - Page 64
identical numbers with different area codes will be displayed. D To set an address book entry as a destination using the phone number, the number must already be (To delete previous destinations, see page 119.) The screen changes and displays the map location of the selected destination and the - 2012 Toyota Tundra | Navigation Manual - Page 65
and the longitude at the top of the screen. 3. Touch the button of the desired address book entry. "Options": To register or edit address book. (See page 108.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance - 2012 Toyota Tundra | Navigation Manual - Page 66
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2012 Toyota Tundra | Navigation Manual - Page 67
the destination to be set. 5. Touch "OK". 8. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 6. Touch the button - 2012 Toyota Tundra | Navigation Manual - Page 68
" screen. 3. Touch "Freeway Entrance/Exit" on the "Intersection & Freeway" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected - 2012 Toyota Tundra | Navigation Manual - Page 69
button. 2. Touch "Map" on the second page of the "Destination" screen. 6. Either a freeway "Entrance" or "Exit" can be selected. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "Starting route - 2012 Toyota Tundra | Navigation Manual - Page 70
Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 3. Touch the destination - 2012 Toyota Tundra | Navigation Manual - Page 71
11 04.21 DESTINATION SEARCH Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION Set destinations - 2012 Toyota Tundra | Navigation Manual - Page 72
the desired route from 3 possible routes. (See page 74.) "Edit Route": To change the route. (See page 75.) 1 D The route for returning may not be route nor a route without traffic congestion. D Route guidance may not be available if there is no road data for the specified location. D When setting - 2012 Toyota Tundra | Navigation Manual - Page 73
11 04.21 DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from 3 routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick", "Alt." or "Short" to select the desired route. "Quick": Recommended - 2012 Toyota Tundra | Navigation Manual - Page 74
.) "Delete": To delete destinations. (See page 85.) "Reorder": To reorder destinations. (See page 84.) "Preferences": A number of choices are provided on the conditions which the system uses to determine the route to the destination. (See page 89) 75 - 2012 Toyota Tundra | Navigation Manual - Page 75
11 04.21 DESTINATION SEARCH 76 - 2012 Toyota Tundra | Navigation Manual - Page 76
11 04.21 ROUTE GUIDANCE SECTION ROUTE GUIDANCE Route guidance D Route guidance screen D Typical voice guidance prompts D Distance and time to destination D Setting and deleting destinations Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route Detour setting - 2012 Toyota Tundra | Navigation Manual - Page 77
11 04.21 ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the - 2012 Toyota Tundra | Navigation Manual - Page 78
11 04.21 ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be - 2012 Toyota Tundra | Navigation Manual - Page 79
screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen - 2012 Toyota Tundra | Navigation Manual - Page 80
11 04.21 ROUTE GUIDANCE Typical voice guidance prompts The voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.5 miles 4.7 miles 0.5 miles 1 2 1 2 3 4 "Proceed about 4 miles to the traffic circle." "In half - 2012 Toyota Tundra | Navigation Manual - Page 81
−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished - 2012 Toyota Tundra | Navigation Manual - Page 82
11 04.21 ROUTE GUIDANCE Distance and time to destination The distance, the estimated travel time and the estimated arrival time from the current position to the selected destination are displayed. Estimated travel time is displayed. Estimated arrival time is displayed. When the vehicle is on the - 2012 Toyota Tundra | Navigation Manual - Page 83
the arrival order of the additional destination. 3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 84 - 2012 Toyota Tundra | Navigation Manual - Page 84
the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set - 2012 Toyota Tundra | Navigation Manual - Page 85
- - Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where a detour process. After detouring, the system returns to the original guidance route. "Whole Route": By touching this button, the system will calculate an entire new route - 2012 Toyota Tundra | Navigation Manual - Page 86
11 04.21 ROUTE GUIDANCE - Route overview 1. Touch "Route". This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the - 2012 Toyota Tundra | Navigation Manual - Page 87
, not all 1. Touch "Route". road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the - 2012 Toyota Tundra | Navigation Manual - Page 88
11 04.21 ROUTE GUIDANCE - Route preference D To select route type You can designate the route conditions of the route to the destination. : To indicate the next destination. : To preview the route to the next destination. : To preview the route to the next destination in fast−forward mode. : To - 2012 Toyota Tundra | Navigation Manual - Page 89
of choices are provided on the conditions which the system uses to determine the route to the destination. The entire route from the starting point to the destination is displayed. "OK": To start guidance. "Edit Route": To change a route. (See page 75.) 1. Touch "Route". 2. Touch "Preferences" to - 2012 Toyota Tundra | Navigation Manual - Page 90
11 04.21 ROUTE GUIDANCE - Pausing and resuming guidance D Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. - 2012 Toyota Tundra | Navigation Manual - Page 91
of Point of Interest on the screen. When the Points of Interest to be displayed on the map screen have already been set, "Change POI" is displayed. The screen will change to the current position map with route guidance. A screen with a limited choice of Points of Interest will be displayed. (To - 2012 Toyota Tundra | Navigation Manual - Page 92
, touch this button. "Find Local POI": When searching for the nearest Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 200 miles (320 km). (See page 94.) Select the desired POI categories. The selected category icon appears on the top - 2012 Toyota Tundra | Navigation Manual - Page 93
11 04.21 ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 200 miles (320 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the - 2012 Toyota Tundra | Navigation Manual - Page 94
to set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the . At this time, the distance from of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. - 2012 Toyota Tundra | Navigation Manual - Page 95
It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). 1. Touch "Show on Map". 2. Touch "POI Icons". The "POI Icons" indicator is - 2012 Toyota Tundra | Navigation Manual - Page 96
11 04.21 ROUTE GUIDANCE D To start recording the route trace D To stop recording the route trace 1. Touch "Show on Map". 1. Touch "Show on Map". 2. Touch "Route Trace". "Route Trace" indicator is highlighted. 2. Touch "Route Trace". The following screen will be displayed. Touching "Yes" - 2012 Toyota Tundra | Navigation Manual - Page 97
service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service service and activation, call XMr Listener Care Center at and service, they are subject to change. The - 2012 Toyota Tundra | Navigation Manual - Page 98
11 04.21 ROUTE GUIDANCE D Show XMr NavTraffic information XMr NavTraffic information is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 99 - 2012 Toyota Tundra | Navigation Manual - Page 99
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2012 Toyota Tundra | Navigation Manual - Page 100
11 04.21 MY PLACES SECTION MY PLACES My places D Navigation settings Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 102 103 105 108 114 119 101 - 2012 Toyota Tundra | Navigation Manual - Page 101
search by Preset destinations" on page 54 and " - Destination search by "Address Book"" on page 66.) Registered areas are avoided at the time of route search. On home (See page 103.) Sets preset destinations (See page 105.) Sets address book (See page 108.) Sets area to avoid (See page 114.) Deletes - 2012 Toyota Tundra | Navigation Manual - Page 102
"Destination" screen. (See "- Destination search by Home" on page 54.) 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. (a) Registering home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. 4. Touch "Set Home - 2012 Toyota Tundra | Navigation Manual - Page 103
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing home" on page 104. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be - 2012 Toyota Tundra | Navigation Manual - Page 104
touch screen button on the "Destination" screen. (See "- Destination search by Preset Destinations" on page 54.) 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 4. Touch "Delete". 5. To delete home, touch "Yes". To cancel the deletion, touch "No". 3. Touch "Preset Destinations - 2012 Toyota Tundra | Navigation Manual - Page 105
11 04.21 MY PLACES (a) Registering preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. When registration of preset destination is completed, the "Edit Preset Destination" screen will be - 2012 Toyota Tundra | Navigation Manual - Page 106
MY PLACES (b) Editing preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names - 2012 Toyota Tundra | Navigation Manual - Page 107
Settings" screen. Points or areas on the map can be registered. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book". 4. Touch "Delete". D Registering address book entries 5. Touch the preset destination for deletion. "Select All": To select all preset - 2012 Toyota Tundra | Navigation Manual - Page 108
11 04.21 MY PLACES (a) Registering address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing address book entries" on page 110. INFORMATION - 2012 Toyota Tundra | Navigation Manual - Page 109
telephone number of a registered address book entry can be edited. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can - 2012 Toyota Tundra | Navigation Manual - Page 110
11 04.21 MY PLACES D To change "Icon" SOUND ICONS You can set a sound for some address book entries. When the vehicle approaches the location of the address book entry, the selected sound will be heard. 1. Touch "With Sound" on the "Address Book Entry Icon" screen. 1. Touch "Edit" of "Icon". 2. - 2012 Toyota Tundra | Navigation Manual - Page 111
11 04.21 MY PLACES D To change "Name" DISPLAYING MEMORY POINT NAMES The name of an address book entry can be set to display on the map. 1. Touch "Edit" of "Name". To show the name, touch "On" on the "Edit Address Book Entry" screen. To not show it, touch "Off". 2. Enter the name using - 2012 Toyota Tundra | Navigation Manual - Page 112
11 04.21 MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch one of the 8 directional touch screen buttons to move the cursor to the - 2012 Toyota Tundra | Navigation Manual - Page 113
11 04.21 MY PLACES - Setting up the "Areas to Avoid" (c) Deleting address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. Areas you want to avoid because of traffic jams, construction work or other - 2012 Toyota Tundra | Navigation Manual - Page 114
PLACES (a) Registering areas to avoid 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Areas to Avoid" on the to be avoided. (See "Destination search" on page 52.) 8. Touch either or to change the size of the area to be avoided. 9. Touch "OK". INFORMATION D If a - 2012 Toyota Tundra | Navigation Manual - Page 115
and/or area size of a registered area can be edited. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Areas to Avoid" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit the name of the area to avoid. The names can - 2012 Toyota Tundra | Navigation Manual - Page 116
11 04.21 MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be - 2012 Toyota Tundra | Navigation Manual - Page 117
11 04.21 MY PLACES D To change "Location" D To change "Size" 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Size". 2. OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 118 - 2012 Toyota Tundra | Navigation Manual - Page 118
Touch "Navi." on the "Setup" screen. 3. Touch "Delete Previous Dest.". 4. Touch "Delete". 5. Touch the button to be deleted. "Select All": To select all registered areas to avoid in the system. "Unselect All": To unselect all registered areas to avoid in the system. 6. Touch "Delete". 7. To delete - 2012 Toyota Tundra | Navigation Manual - Page 119
11 04.21 MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 120 - 2012 Toyota Tundra | Navigation Manual - Page 120
AND INFORMATION SECTION TELEPHONE AND INFORMATION Telephone and information D Telephone (Hands−free system for cellular phone) Enter a Bluetooth phone ...Call on the Bluetooth phone ...Receive on the Bluetooth phone ...Talk on the Bluetooth phone ...D Calendar 5 122 127 132 139 139 142 121 - 2012 Toyota Tundra | Navigation Manual - Page 121
steering wheel by connecting your cellular phone. This system supports Bluetoothr. Bluetoothr is a wireless data system by audio and hands−free at the same time, the following problems may occur. D The Bluetoothr connection may be cut. D Bluetooth is a registered trademark of Bluetooth SIG, Inc. 122 - 2012 Toyota Tundra | Navigation Manual - Page 122
wheel. U008AHNS G PBAP (Phone Book Access Profile) Ver.1.0 If your cellular phone does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota.letstalk.com/" to find approved Bluetoothr phones for this system. U005AHNS - 2012 Toyota Tundra | Navigation Manual - Page 123
air−conditioning fan is loud. D There is an effect from the network of the cellular phone. Indicates the condition of Bluetoothr connection. "Blue charge left may not be displayed depending on the phone you have. This system doesn't have a charging function. 3 Indicates the receiving area. "Rm" - 2012 Toyota Tundra | Navigation Manual - Page 124
of the service area or in a place inaccessible by radio waves, "No Service" is displayed. An antenna for console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. About the phonebook in this system - 2012 Toyota Tundra | Navigation Manual - Page 125
: 1551A−DNNS025 Type : DNNS025 This device complies with part 15 of the FCC Rules. Operation is subject to the . CAUTION FCC WARNING: Changes or modifications not expressly approved co−located or operated in conjunction with any other antenna or transmitter. Operation is subject to the following - 2012 Toyota Tundra | Navigation Manual - Page 126
11 04.21 TELEPHONE AND INFORMATION - Enter a Bluetoothr phone Cet équipement se conforme aux limites d'exposition aux radiations établies par Industrie Canada pour un environnement non contrôlé ainsi qu'aux directives d'exposition aux fréquences radioélectriques (RF) émises par Industrie Canada - 2012 Toyota Tundra | Navigation Manual - Page 127
same one. 4. When this screen is displayed, input the passcode displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen - 2012 Toyota Tundra | Navigation Manual - Page 128
established. When the engine switch is in the "ACC" or "ON" position, a nearby cellular phone you have registered is searched for. Next, the system automatically connects with the latest of the phones connected to in the past. Then, the connection result is displayed. This screen appears when the - 2012 Toyota Tundra | Navigation Manual - Page 129
the auto connection has failed or "Handsfree power" is turned off, you have to connect Bluetoothr manually. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 5. The "Connect Bluetooth∗" screen is displayed. 3. Touch "Connect Phone". 6. When the connection is completed, this screen is displayed - 2012 Toyota Tundra | Navigation Manual - Page 130
phone is disconnected with a poor reception from the Bluetoothr network when the engine switch is in the "ACC" or "ON" position the system automatically reconnects the Bluetoothr phone. In this case, the connection result is not displayed. If the Bluetoothr is disconnected on purpose such as you - 2012 Toyota Tundra | Navigation Manual - Page 131
phone After you enter the Bluetoothr phone, you can call by using hands−free system. You can call using the 6 methods described below. D By dial You . 1. Push the "INFO/PHONE" button. You can also push of the steering wheel to display the "Phone" screen. 3. Touch the desired key to input the phone - 2012 Toyota Tundra | Navigation Manual - Page 132
11 04.21 TELEPHONE AND INFORMATION D By phonebook You can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in total of phonebooks. This cannot be operated while driving. 3. Select the - 2012 Toyota Tundra | Navigation Manual - Page 133
want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 134 - 2012 Toyota Tundra | Navigation Manual - Page 134
which you received Outgoing: numbers which you called You can call using the latest 5 call history items shown by "All" while driving. 3. Touch ing wheel. or push of the steer- 1. Touch "Call History". 2. Select the desired data from the list. When the list is switched, touch "All", "Missed - 2012 Toyota Tundra | Navigation Manual - Page 135
steering wheel to display the "Phone" screen. 2. Push of the steering wheel to display the "Call History" screen. 3. Push of the steering wheel to D Unnoticed phone number such as a public phone is not memorized in the system. D A international phone call may not be made depending on the cellular - 2012 Toyota Tundra | Navigation Manual - Page 136
." "Say a command." "Such as "Dial by Number", "Dial by Name", "Redial", "Call Back" or "Connect Phone"." "(beep)" You: "Dial by Name." System: "Dial by Name." "Say a name from your contact list." "(beep)" You: "MIKE." System: "MIKE." "Say the type of number." "Such as "Mobile", "Home", "Work" or - 2012 Toyota Tundra | Navigation Manual - Page 137
is displayed, you of the steering can also call by pushing wheel or touching "Dial". Cancelling the voice recognition The voice recognition will you do the following. D Keep on pushing the talk switch. of the steering wheel. D Push D Touch "Cancel". (Except for recognizing the command.) D By POI - 2012 Toyota Tundra | Navigation Manual - Page 138
up the phone: Touch or push of the steering wheel. To mute your voice: Touch "Mute". To input a Key: Touch "0−9". To transfer the call: Touch "Call Transfer". You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to Hands−free call, the - 2012 Toyota Tundra | Navigation Manual - Page 139
tone screen appears. To hang up the phone: Touch or push of the steering wheel. The continuous tone signal is the marked sign (p or w) and the number following to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number - 2012 Toyota Tundra | Navigation Manual - Page 140
by giving a command during a call. The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see "Speech command system" on page 44.) When the call is interrupted by the third party while talking, this screen is displayed. Touch or push of the steering - 2012 Toyota Tundra | Navigation Manual - Page 141
To view calendar. U009AHNS Everytime you touch or push of the steering wheel while interrupt call, the other party will be switched. If your cellular current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month - 2012 Toyota Tundra | Navigation Manual - Page 142
AUDIO/VIDEO SYSTEM Audio/video system D Quick reference D Using your audio/video system Some basics ...Radio operation ...CD changer operation ...Bluetooth audio operation ...DVD player operation ...USB memory/iPod operation ...D Audio/video remote controls D Audio/video system operating hints - 2012 Toyota Tundra | Navigation Manual - Page 143
11 04.21 AUDIO/VIDEO SYSTEM Quick reference Operations such as selecting a preset station and adjusting the sound balance are carried out on the touch screen. To display the audio screen, push the "AUDIO" button. U6001AHSTN 1 2 Function menu display screen To control the radio, CD changer, DVD - 2012 Toyota Tundra | Navigation Manual - Page 144
the audio control screen. For or to access a desired system. Your audio system works when the engine switch is turned to the "ACC" or "ON" position. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes antenna and the body of any person - 2012 Toyota Tundra | Navigation Manual - Page 145
11 04.21 AUDIO/VIDEO SYSTEM D Laser products D Do not take this unit apart or attempt to make any changes yourself. This is an alter any of its parts since you may be exposed to laser rays and dangerous voltages. D This product utilizes a laser. Use of controls or adjustments or performance - 2012 Toyota Tundra | Navigation Manual - Page 146
U023AHNS U033AHNS "AUDIO": Push this button to display touch−screen buttons for audio system (audio control mode). "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. You can select the function that - 2012 Toyota Tundra | Navigation Manual - Page 147
11 04.21 AUDIO/VIDEO SYSTEM Push these buttons or tabs if you want to switch from one turn off the CD changer/DVD player∗ by ejecting all the discs. If the audio system was previously off, then the entire audio system will be turned off when you eject all the discs. If the other function was - 2012 Toyota Tundra | Navigation Manual - Page 148
lightly and directly on the screen. Touch the tab to select the desired mode when the audio control mode is selected. The selected switch is highlighted. U6086GS INFORMATION U6085GS D If the system does not respond to a touch of a touch−screen button, move your finger away from the screen and - 2012 Toyota Tundra | Navigation Manual - Page 149
SYSTEM (d) DSP control 1. Push the "AUDIO" button. (e) Tone and balance U6087GS 2. Touch "Sound" to display the sound adjustment screen. The audio systems mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of - 2012 Toyota Tundra | Navigation Manual - Page 150
(f) Selecting screen size (with rear seat entertainment system) 1. Push the "AUDIO" button and touch "DVD" tab. U6007GS 1. Touch "Sound" tab to display this screen. 2. Touch the desired button. "Treble" "+" or "-": Adjust high−pitched - 2012 Toyota Tundra | Navigation Manual - Page 151
11 04.21 AUDIO/VIDEO SYSTEM U6009GS 4. Touch the desired button. "Normal": Displays a 3 : 4 screen, with either side in black. "Wide 1": Widens the 3 : 4 screen horizontally to fill the try to disassemble or oil any part of the changer. Do not insert anything other than a disc into the slot. 152 - 2012 Toyota Tundra | Navigation Manual - Page 152
the tab will tone down. For details, refer to the "Owner's Manual". (j) USB port It is necessary to connect the USB memory/iPod with "FM2" appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "SAT" button or touch the "SAT" tab on AUDIO screen, - 2012 Toyota Tundra | Navigation Manual - Page 153
11 04.21 AUDIO/VIDEO SYSTEM (b) Presetting a station U014AHNS U6080GS 1. Tune in the desired station. 2. a blown fuse. Turn the knob clockwise to step up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received - 2012 Toyota Tundra | Navigation Manual - Page 154
select a station, touch "SCAN" again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text messages from for a stronger signal station. RDS features are available for use only on FM stations which broadcast RDS information. 155 - 2012 Toyota Tundra | Navigation Manual - Page 155
04.21 AUDIO/VIDEO SYSTEM U6080GS "Type A "" Each time you touch "A Type " or "Type "", the program type changes as in the following: D ROCK D MISC (Miscellaneous) D INFORM (Information) D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D RELIGION D ALART - 2012 Toyota Tundra | Navigation Manual - Page 156
11 04.21 AUDIO/VIDEO SYSTEM (e) Traffic announcement U6090GS "Message" If the system receives a radio text from RDS station, "MSG" appears on the display. Touch "Message", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch - 2012 Toyota Tundra | Navigation Manual - Page 157
change. Satellite tuner technology notice: Toyota's satellite radio tuners are awarded Type Approval Certificates from XMr Satellite Radio Inc. as proof of compatibility with the services will need the radio ID when activating XMr service or when reporting a problem. If you select the "CH 000" using - 2012 Toyota Tundra | Navigation Manual - Page 158
11 04.21 AUDIO/VIDEO SYSTEM (c) Listening to satellite radio (d) Channel category U015AHNS U6082GS Touch either "A Type" or "Type "" to go to the next or previous category. Push the "SAT" button - 2012 Toyota Tundra | Navigation Manual - Page 159
04.21 AUDIO/VIDEO SYSTEM (e) Presetting a channel Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same radio will step up or down the channel within the current channel category. Touch "TypeSeek". The radio will step up the - 2012 Toyota Tundra | Navigation Manual - Page 160
11 04.21 AUDIO/VIDEO SYSTEM (g) Displaying the title and name U6092GS When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric - 2012 Toyota Tundra | Navigation Manual - Page 161
channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or NO SIGNAL LOADING OFF AIR −−− Contact the XMr Listener 1−877 - 2012 Toyota Tundra | Navigation Manual - Page 162
to user Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"∗ linked to the respective "Audio - 2012 Toyota Tundra | Navigation Manual - Page 163
11 04.21 AUDIO/VIDEO SYSTEM - CD changer operation (a) Inserting discs U029AHNS U030AHNS The engine is loaded, the amber indicators at either side of the slot start blinking again. When the indicators change to green, you can insert the next disc. 4. Push the "LOAD/CLOSE" button to close - 2012 Toyota Tundra | Navigation Manual - Page 164
SYSTEM CAUTION D Do not place anything on the opened display, as such items may be thrown about and possibly injure people in the vehicle during sudden braking ejected, the amber indicators change to green. A disc can be inserted. INFORMATION Under extremely cold conditions, the display may react - 2012 Toyota Tundra | Navigation Manual - Page 165
AUDIO/VIDEO SYSTEM D All the discs: U029AHNS 3. Remove the disc. The indicators start blinking again and the next disc is ejected. If a disc is not removed within 15 seconds after it is ejected, the operation will be canceled. When all the discs are removed, the amber indicators change to green - 2012 Toyota Tundra | Navigation Manual - Page 166
11 04.21 AUDIO/VIDEO SYSTEM (c) Playing a disc (d) Selecting a desired disc U035AHNS U6021GS Touch "Change Discs" on "CD" starts again. The changer will skip any empty disc trays. Vehicles with rear seat entertainment system - If the DVD player is turned on, push the "DISC/AUX" button again or - 2012 Toyota Tundra | Navigation Manual - Page 167
11 04.21 AUDIO/VIDEO SYSTEM (e) Playing an audio disc U6093GS Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an audio disc number to display this screen. U019AHNS SELECTING A DESIRED TRACK "SEEK/TRACK" button: Use for direct access to a desired track. Push - 2012 Toyota Tundra | Navigation Manual - Page 168
11 04.21 AUDIO/VIDEO SYSTEM U6093GS Touch the desired track number. The changer will start playing the selected track from the beginning. : By touching this touch−screen button, the list - 2012 Toyota Tundra | Navigation Manual - Page 169
AUDIO/VIDEO SYSTEM U6094GS OTHER FUNCTIONS "RPT": Use it for automatic repeat of the track or disc you are currently listening to. Repeating a track - Touch "RPT" briefly while the track is playing. "RPT" appears on the screen. When the track is finished, the changer will automatically go back to - 2012 Toyota Tundra | Navigation Manual - Page 170
AUDIO/VIDEO SYSTEM (f) Playing a MP3/WMA disc SELECTING A DESIRED FOLDER U6095GS Push the "AUDIO" button and touch the "CD" tab, then touch "Change Discs". The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder - 2012 Toyota Tundra | Navigation Manual - Page 171
11 04.21 AUDIO/VIDEO SYSTEM U019AHNS U014AHNS SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push playing. "TUNE·FILE" knob: Use for direct access to a desired file in the disc. Turn the "TUNE·FILE" knob to step up or down all the files in the disc you - 2012 Toyota Tundra | Navigation Manual - Page 172
11 04.21 AUDIO/VIDEO SYSTEM U6095GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. U6027GS Touch the desired file number. The changer will start playing - 2012 Toyota Tundra | Navigation Manual - Page 173
11 04.21 AUDIO/VIDEO SYSTEM U6096GS SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on the screen. The changer will play - 2012 Toyota Tundra | Navigation Manual - Page 174
AUDIO/VIDEO SYSTEM U6098GS OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - Touch "RPT" briefly while the file is playing. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the - 2012 Toyota Tundra | Navigation Manual - Page 175
audio signals of the disc cannot be read or the system has trouble. Push the "DISC·AUX" button once again. If system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication. U6086GS This audio system supports Bluetoothr, a wireless data system - 2012 Toyota Tundra | Navigation Manual - Page 176
Ver.1.3 or higher) Please go to "http://www.toyota.letstalk.com/" to find approved Bluetoothr phones for this system. Bluetooth is a trademark owned by Bluetooth SIG. Inc. CAUTION Do not operate the player's controls or connect to the Bluetoothr audio system while driving. NOTICE Do not leave your - 2012 Toyota Tundra | Navigation Manual - Page 177
in the glove box or console box). D Your portable player touches or is covered with metal materials. Leave the Bluetoothr portable player in a place where the "Blue" indication is displayed. The portable player information is registered when the Bluetoothr audio system is connected. When you release - 2012 Toyota Tundra | Navigation Manual - Page 178
11 04.21 AUDIO/VIDEO SYSTEM FCC ID : HYQDNNS025 Type : DNNS025 IC : 1551A −DNNS025 Type : DNNS025 This device complies with part 15 of the FCC must not be co−located or operated in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions : (1) - 2012 Toyota Tundra | Navigation Manual - Page 179
11 04.21 AUDIO/VIDEO SYSTEM Cet équipement se conforme aux limites d'exposition aux radiations établies par Industrie Canada pour un environnement non contrôlé ainsi qu'aux directives d'exposition aux fré - 2012 Toyota Tundra | Navigation Manual - Page 180
method is "From Portable Player" Operate the portable player and connect it to the Bluetoothr audio system. For the operation procedure for the portable player, see the instruction manual that comes with it. U6100GS Touch "Connect". U6100GS U6033GS Touch "Connect". When the connection is completed - 2012 Toyota Tundra | Navigation Manual - Page 181
engine switch is in the "ACC" or "ON" position, the system automatically reconnects the portable player. In this case, the connection result is start playing again. Depending on the portable player that is connected to the system, the music may start playing when touching while it is paused. On the - 2012 Toyota Tundra | Navigation Manual - Page 182
.21 AUDIO/VIDEO SYSTEM D Selecting a desired track U6101GS U019AHNS Some titles may not be displayed depending on the type of portable player. "SEEK/TRACK" button: Use for direct access to a desired the portable player that is connected to the system, certain functions may not be available. 183 - 2012 Toyota Tundra | Navigation Manual - Page 183
SYSTEM D Selecting a desired album D Other function U6086GS "Album Y": Touch this button to go to the next album. "Album B": Touch this button to go to the previous album. U6086GS "RPT": Use this control portable player that is connected to the system, certain functions may not be available. 184 - 2012 Toyota Tundra | Navigation Manual - Page 184
", refer to "Owner's Manual". For appropriate discs for this player, see "Audio/video system operating hints" on page 220. (a) Inserting the disc INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. XS00419 Insert the disc into - 2012 Toyota Tundra | Navigation Manual - Page 185
inserted, "Check disc" will also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 220. Push the " " button. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. 186 - 2012 Toyota Tundra | Navigation Manual - Page 186
11 04.21 AUDIO/VIDEO SYSTEM (c) Playing a disc (d) Operating an audio CD U035AHNS U6102GS PLAYING AN AUDIO CD CD text only - The disc title and track title will appear on the - 2012 Toyota Tundra | Navigation Manual - Page 187
SYSTEM U019AHNS U6041GS Touch the desired track number. The player will start playing the selected track from the beginning. SELECTING A DESIRED TRACK "SEEK/TRACK" button: Use for direct access can be selected from a list. This function is available only when the vehicle is not moving. Touch " - 2012 Toyota Tundra | Navigation Manual - Page 188
is playing. When the track is finished, the player will automatically go back to the beginning of the track and play the track again. To cancel the disc which you are currently listening to. When "RAND" is touched, the system selects a track in the disc you are currently listening to. To cancel it, - 2012 Toyota Tundra | Navigation Manual - Page 189
11 04.21 AUDIO/VIDEO SYSTEM (e) Operating a MP3 DISC U6105GS PLAYING A MP3 DISC Push the "AUDIO" button and touch the " for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. 190 - 2012 Toyota Tundra | Navigation Manual - Page 190
11 04.21 AUDIO/VIDEO SYSTEM U019AHNS U6105GS SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. 191 - 2012 Toyota Tundra | Navigation Manual - Page 191
11 04.21 AUDIO/VIDEO SYSTEM U6046GS Touch the desired file number. The player will start playing the selected file from the beginning. : By touching this touch−screen button, the list - 2012 Toyota Tundra | Navigation Manual - Page 192
11 04.21 AUDIO/VIDEO SYSTEM U6107GS SEARCHING FOR A DESIRED FOLDER Touch and hold "SCAN the file is playing. "RPT" appears on the screen. When the file is finished, the player will automatically go back to the beginning of the file and play the file again. To cancel it, touch "RPT" once again. - 2012 Toyota Tundra | Navigation Manual - Page 193
it, touch "RAND" once again. When a file is skipped or the system is inoperative, touch "RAND" to reset. (f) Operating a DVD video disc functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For the back certain DVD video discs. 194 - 2012 Toyota Tundra | Navigation Manual - Page 194
SYSTEM CAUTION Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound effects. If you adjust the volume assuming that the conversations represent the maximum volume level that the DVD will play, you may be startled by louder sound effects or when you change - 2012 Toyota Tundra | Navigation Manual - Page 195
. Touch "Settings" on "DVD" screen and touch "Wide" on "Settings" screen. The screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. U6051GS DVD SETTINGS If you touch "Settings" on "DVD" screen - 2012 Toyota Tundra | Navigation Manual - Page 196
200.) "Subtitle": The subtitle changing screen appears. (See page 199.) "Angle": The angle selection screen appears. (See page 200.) "Wide": The screen mode screen appears. (See page 151.) U6084GS DISPLAYING DVD CONTROLS If you touch , while watching video, DVD controls will appear. If " " appears - 2012 Toyota Tundra | Navigation Manual - Page 197
11 04.21 AUDIO/VIDEO SYSTEM DESCRIPTION OF DVD CONTROLS "Menu" and "Top Menu": If you touch any of the above controls, the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control key appears on the screen. ( - 2012 Toyota Tundra | Navigation Manual - Page 198
11 04.21 AUDIO/VIDEO SYSTEM U6054GS SEARCHING BY TITLE Enter the title number and touch you touch screen returns. , the previous CHANGING THE SUBTITLE LANGUAGE Each time you touch "Change", the language is selected from the ones stored in the discs and changed. When you touch "Hide", the subtitle - 2012 Toyota Tundra | Navigation Manual - Page 199
11 04.21 AUDIO/VIDEO SYSTEM U6069GSb CHANGING THE AUDIO LANGUAGE Each time you touch "Change", the language is selected from the ones stored in the discs and changed. When you touch screen returns. , the previous U6076GS CHANGING THE ANGLE The angle can be selected for discs that are multi−angle - 2012 Toyota Tundra | Navigation Manual - Page 200
11 04.21 AUDIO/VIDEO SYSTEM D Audio language You can change the audio language. 1. Touch "Audio Language , see the following "ENTER AUDIO LANGUAGE CODE". To return to the "Setup Menu" screen, . touch the D DVD language You can change the language on the DVD video menu. 1. Touch "DVD Language". 2. - 2012 Toyota Tundra | Navigation Manual - Page 201
SYSTEM or off alternately. D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4−digit personal code on the "Select Restriction Level". Touch the switch to return to the "Setup Menu" screen. ENTER AUDIO LANGUAGE CODE U6059GS If you touch "Other" - 2012 Toyota Tundra | Navigation Manual - Page 202
11 04.21 AUDIO/VIDEO SYSTEM 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 0209 0214 0215 0218 0301 0315 0319 0325 0401 0426 0515 0520 0521 0601 0609 - 2012 Toyota Tundra | Navigation Manual - Page 203
11 04.21 AUDIO/VIDEO SYSTEM 1315 1318 1319 1320 1325 1401 1405 1415 1503 1513 1518 1601 1612 Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 2019 2020 2023 2111 2118 2126 2209 2215 2315 2408 2515 2621 Sesotho Sundanese - 2012 Toyota Tundra | Navigation Manual - Page 204
"D Rear system lock" on page 238. U6110GS PLAYING A VIDEO CD Push the "AUDIO" button and touch the "DVD" tab to display this screen. When you touch "Wide" on "Settings" screen, the screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the parking brake is - 2012 Toyota Tundra | Navigation Manual - Page 205
SYSTEM U6062GS DISPLAYING VIDEO CD SETTINGS If you touch "Settings" on "DVD" screen, "Settings" screen appears. DESCRIPTION OF VIDEO CD SETTINGS D Controls multiplex transmission changing control. The mode changes from Main/Sub to Main, to Sub and back to Main/Sub by touching this control. "Return - 2012 Toyota Tundra | Navigation Manual - Page 206
AUDIO/VIDEO SYSTEM DISPLAYING VIDEO CD CONTROLS If you touch the part where controls are not located while you are watching video on the video CD, video CD controls will appear. If " " appears on the display when you touch a control, the operation is not permitted. DESCRIPTION CONTROLS OF VIDEO - 2012 Toyota Tundra | Navigation Manual - Page 207
player or another unit equipped with the player malfunction, your audio system will display following messages. If "Check disc" appears on the appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 220. If "Region code error" appears on the - 2012 Toyota Tundra | Navigation Manual - Page 208
21 AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. cannot use it. Marks shown on DVD video discs: Indicates NTSC format of color TV. Indicates the number of audio tracks. Indicates the number of language subtitles - 2012 Toyota Tundra | Navigation Manual - Page 209
SYSTEM of data assigned to the picture is changed depending on the picture format has also been page 209. Audio: This DVD player can play liner PCM, Dolby digital and MPEG audio format DVD. Other programs stored in DVD video disc are divided in parts by title and chapter. Title: The largest unit - 2012 Toyota Tundra | Navigation Manual - Page 210
SYSTEM - USB memory/ iPod operation Connecting a USB memory or iPod enables you to enjoy music from the vehicle speakers. (b) Playing a USB memory or iPod D Playing and pausing a file or track CAUTION Do not operate the player's controls will start playing Open the cover and connect a USB memory - 2012 Toyota Tundra | Navigation Manual - Page 211
and reinserted (and the contents have not been changed), the USB memory will resume play from the same point in which it was last used. D Depending on the iPod or USB memory that is connected to the system, certain functions may not be available. 2. Select the desired play mode. U6079GS 1. Touch - 2012 Toyota Tundra | Navigation Manual - Page 212
11 04.21 AUDIO/VIDEO SYSTEM D Selecting a desired folder (USB memory only) : By touching this folder. "Select" for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. Touch the desired - 2012 Toyota Tundra | Navigation Manual - Page 213
04.21 AUDIO/VIDEO SYSTEM D Selecting a desired file or track U019AHNS U014AHNS "SEEK/TRACK" button: Use for direct access to a desired file "TUNE/FILE" knob: Use for direct access to a desired file or track in the player. Turn the "TUNE/FILE" knob to step up or down all the files or tracks - 2012 Toyota Tundra | Navigation Manual - Page 214
11 04.21 AUDIO/VIDEO SYSTEM U6078GS " USB memory Touch the desired file or track number. The or track can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file or track list is displayed. ton, the list moves up by 5 file or track groups. If - 2012 Toyota Tundra | Navigation Manual - Page 215
11 04.21 AUDIO/VIDEO SYSTEM D Searching for a desired file (USB memory only) D Searching for a desired folder (USB memory only) U6111GS U6112GS Touch "SCAN" on the screen briefly while the music - 2012 Toyota Tundra | Navigation Manual - Page 216
.21 AUDIO/VIDEO SYSTEM D Other functions U6078GS " USB memory U6079GS " iPod "RPT": Use this control to automatic replay the appears on the screen. When the folder is finished, the changer will automatically go back to the beginning of the folder and play the folder again. To cancel it, select - 2012 Toyota Tundra | Navigation Manual - Page 217
will be cancelled. To step up or down the change to the next or the previous disc. Repeat this operation until you reach the disc you want to listen to. U6002AHSTN Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls - 2012 Toyota Tundra | Navigation Manual - Page 218
. 3 "MODE" switch Push "MODE" switch to select an audio mode. Each push changes the mode sequentially if the desired mode is ready to use. To turn the audio/video system on, push the "MODE" switch. To turn the audio/video system off, push and hold the "MODE" switch until you hear a beep. 219 - 2012 Toyota Tundra | Navigation Manual - Page 219
or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio - it is just the normal result of conditions - 2012 Toyota Tundra | Navigation Manual - Page 220
changer and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the changer and system. iPod 4th generation and earlier models are not compatible with this system. iPhone, iPod mini, iPod shuffle and iPod photo are not compatible with this system - 2012 Toyota Tundra | Navigation Manual - Page 221
11 04.21 AUDIO/VIDEO SYSTEM Audio CDs XS18016 DVD video discs CD changer D Use only discs marked as shown above. The following products may not be playable on your changer. - 2012 Toyota Tundra | Navigation Manual - Page 222
11 04.21 AUDIO/VIDEO SYSTEM 6U5B93X 6U5B96X " Special shaped discs " Labeled discs NOTICE D Do not use such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause damage to - 2012 Toyota Tundra | Navigation Manual - Page 223
11 04.21 AUDIO/VIDEO SYSTEM 6U5B97X 6U5B98X " Correct " Wrong D Handle discs carefully, especially with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not - 2012 Toyota Tundra | Navigation Manual - Page 224
Joliet file system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back files with carry information such as track title, artist name. D The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz - 2012 Toyota Tundra | Navigation Manual - Page 225
11 04.21 AUDIO/VIDEO SYSTEM D When playing back files recorded as VBR (Variable Bit Rate) files, the play time . 001.mp3 002.mp3 6U5161aX Folder 3 006.mp3 MP3 player (rear seat entertainment system) Folder 1 003.mp3 Folder 2 004.mp3 005.mp3 001.mp3 002.wma 6U5161aX Folder 3 006.mp3 MP3/ - 2012 Toyota Tundra | Navigation Manual - Page 226
on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D USB memory- It is possible to play up to 999 folders or 255 files per folder. D The order changes depending on the PC and MP3/WMA encoding software - 2012 Toyota Tundra | Navigation Manual - Page 227
11 04.21 AUDIO/VIDEO SYSTEM TERMS Packet write- This is a general term that describes the process of the tags are restricted to the number of characters, the information can be viewed when the track is played back. WMA Tag- WMA files can contain a WMA tag that is used in the same way as an ID3 - 2012 Toyota Tundra | Navigation Manual - Page 228
11 04.21 REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system D Rear view monitor system 7 230 229 - 2012 Toyota Tundra | Navigation Manual - Page 229
and all around the vehicle visually. D If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the camera's position and mounting angle checked at your Toyota dealer. D As the camera has a water proof construction, do not detach, disassemble - 2012 Toyota Tundra | Navigation Manual - Page 230
screen may change. D When washing the vehicle, do not apply intensive bursts of water to the camera or camera area. Doing so may result in the camera malfunctioning. Image is displayed approximately level on screen. U036AHNS On screen Corners of bumper The area covered by the camera is limited - 2012 Toyota Tundra | Navigation Manual - Page 231
The area displayed on the screen may vary according to vehicle orientation or road conditions. The rear view monitor system camera is located on the tailgate as shown in the illustration. The camera uses a special lens. The distance of the image that appears on the screen differs from the actual - 2012 Toyota Tundra | Navigation Manual - Page 232
11 04.21 REAR VIEW MONITOR SYSTEM 8U5070X If a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera, the smear effect∗ peculiar to the camera may occur. ∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the - 2012 Toyota Tundra | Navigation Manual - Page 233
11 04.21 REAR VIEW MONITOR SYSTEM 234 - 2012 Toyota Tundra | Navigation Manual - Page 234
SETUP SECTION SETUP Setup D General settings (Used for language selection and the on/off settings of operation sounds and automatic screen change.) D Clock settings (Used for changing be registered.) D Audio settings (Settings are available for portable audio devices and Bluetoothr audio devices - 2012 Toyota Tundra | Navigation Manual - Page 235
of operation sounds and automatic screen change. SCREENS FOR GENERAL SETTINGS U007AHNS 1. Push the "SETUP" button. On this screen, the following functions can be performed. No. 1 Function You can change the language. (See "D Selecting a language" on page 237.) Rear system lock∗ can be set to "On - 2012 Toyota Tundra | Navigation Manual - Page 236
11 04.21 SETUP No. 5 Function Line color can be changed. (See "D Selecting the line color" on page 238.) Keyboard layout can be changed. (See "D Selecting a keyboard layout" on page 239.) Distance unit can be changed. (See "D Unit of measurement" on page 240.) The personal data can be deleted. ( - 2012 Toyota Tundra | Navigation Manual - Page 237
" button. 2. Touch "General" on the "Setup" screen. D Selecting the line color Line color can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 3. Touch "Line Color". 3. Touch "Rear System Lock". U6088FC 4. Touch the desired color. 4. Select "On" or "Off" and then - 2012 Toyota Tundra | Navigation Manual - Page 238
D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the LAYOUT TYPE "General Settings" screen. " "ABC" type 3. Touch "Keyboard Layout". " "QWERTY" type 4. Touch "ABC" or "QWERTY - 2012 Toyota Tundra | Navigation Manual - Page 239
be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" book D Areas to avoid D Previous points D Route trace D Phonebook data D Call history data D Speed dial data D Voice tag data D Bluetoothr phone data D Phone volume setting D Details phone setting This function is available - 2012 Toyota Tundra | Navigation Manual - Page 240
" screen. Then touch to display page 2 of the Used for changing time zones and the on/ off settings of daylight saving time. "General Settings" screen. U007AHNS 1. Push the "SETUP" button. 3. Touch "Delete Personal Data". 2. Touch "Clock". 4. Touch "Delete". 5. Touch "Yes". 3. Touch the items - 2012 Toyota Tundra | Navigation Manual - Page 241
D Time zone A time zone can be selected and GMT can be set. 1. Push the "SETUP" button. 2. Touch "Clock" on the "Setup" screen. On this screen, the following functions can be performed. No. 1 2 Function Time zone can be changed. (See "D Time zone" on page 242.) "On" or "Off" can be selected for - 2012 Toyota Tundra | Navigation Manual - Page 242
be set. SCREEN FOR VOICE SETTINGS U007AHNS 1. Push the "SETUP" button. On this screen, the following functions can be performed guidance during route guidance can be set to "On" or "Off". Voice guidance during audio system use can be set to "On" or "Off". Voice recognition talkback can be set to - 2012 Toyota Tundra | Navigation Manual - Page 243
being guided to your destination. To turn the "Traffic Voice Guidance" on: 1. Push the "SETUP" button. 2. Touch "Voice" on the "Setup" of the "Traffic Voice Guidance". 4. Touch "Save". INFORMATION D This function is available only in English. To select English, see "D Selecting a language" on page - 2012 Toyota Tundra | Navigation Manual - Page 244
11 04.21 SETUP Navigation settings Points or areas on the map can be registered. 3 4 5 6 Function Sets home (See page 103.) Sets preset destinations (See page 105.) Sets address book (See page 108.) Sets area to avoid (See page 114.) Deletes previous destinations (See page 119.) Detailed - 2012 Toyota Tundra | Navigation Manual - Page 245
11 04.21 SETUP SCREENS FOR NAVIGATION SETTINGS 4. Touch the items to be set. 5. Touch "Save". On this screen, the following functions can be performed. No. 1 Function Average cruising - 2012 Toyota Tundra | Navigation Manual - Page 246
adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See "D Current position/ tire change calibration" the estimated arrival time can be set. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the - 2012 Toyota Tundra | Navigation Manual - Page 247
to 99 hours 59 minutes. D Auto avoid traffic The guidance route automatically changes to another route to avoid heavy congestion. To turn the "Audio Avoid Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings - 2012 Toyota Tundra | Navigation Manual - Page 248
traffic Freely flowing traffic is shown with the arrow. To turn the "Show Free Flowing Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. 4. Select "On" of the "Show Free Flowing Traffic". 5. Touch - 2012 Toyota Tundra | Navigation Manual - Page 249
11 04.21 SETUP D POI category change (Select POI icons) Select from among the 6 icons displayed on the "Customize POI Icons" screen, so that setting of the icons to be displayed on the map screen can be done easily. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch " - 2012 Toyota Tundra | Navigation Manual - Page 250
change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup vehicle position, see "Limitations of the navigation system" on page 308. 251 - 2012 Toyota Tundra | Navigation Manual - Page 251
11 04.21 SETUP POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. 4. Touch either the or to ad- just the direction of - 2012 Toyota Tundra | Navigation Manual - Page 252
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to display page 2 of the "Detailed Navi. Settings" screen. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message - 2012 Toyota Tundra | Navigation Manual - Page 253
following messages will not be displayed. "Telephone settings" can be changed on the "Phone settings" screen. U007AHNS This message appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 1. Push the "SETUP" button. The message appears when the map is switched to - 2012 Toyota Tundra | Navigation Manual - Page 254
"OK". D Ring volume setting 1. Touch "Ring Volume". 2. Change each setting according to the following procedures. 3. When you complete all settings, touch "Save". Automatic volume settings for high speed The system will automatically increase the volume by one step up when the speed exceeds 50 mph - 2012 Toyota Tundra | Navigation Manual - Page 255
- Manage phone D Initializing the settings You can initialize the settings. 1. Touch "Default". "Manage phone" is accessed from the "Connect Phone" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 2. Touch "Yes". 3. Touch "Manage Phone". Please refer to the following pages for each setting - 2012 Toyota Tundra | Navigation Manual - Page 256
to the system. 3. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. 2. When this screen is displayed, input the passcode displayed on the screen into the phone. For the operation of the phone, see the manual that - 2012 Toyota Tundra | Navigation Manual - Page 257
is connected You can also register a new Bluetoothr phone in the following way. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Manage Phone". When another Bluetoothr device is currently be reconnected depending on the phone you are using. 4. Touch "Options". 5. Touch "New Phone". 258 - 2012 Toyota Tundra | Navigation Manual - Page 258
11 04.21 SETUP 6. Touch "(empty)" to register your cellular phone to the system. The following operations are the same a Bluetoothr phone yet. Although you can register up to 4 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 1. Select the phone to connect - 2012 Toyota Tundra | Navigation Manual - Page 259
11 04.21 SETUP When you connect the phone while Bluetoothr audio is playing 2. The "Connect Bluetooth∗" screen is displayed. ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. This screen is displayed, and the Bluetoothr audio will stop temporarily. When another Bluetoothr device is - 2012 Toyota Tundra | Navigation Manual - Page 260
in your cellular phone is not changed. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr phones with the same device name and you cannot distinguish one from the other, refer to it. 1. Touch "Options". 2. Touch "Edit Phones". 261 - 2012 Toyota Tundra | Navigation Manual - Page 261
11 04.21 SETUP 3. Select the phone to edit. 5. Use the software keyboard to input the device name. 4. This screen is displayed. If you want to change the device name, touch "Edit". 6. Confirm the device name and touch "OK". 262 - 2012 Toyota Tundra | Navigation Manual - Page 262
11 04.21 SETUP D Deleting a Bluetoothr phone 1. Touch "Options". 3. Select the desired phone or touch "Select All", then touch "Delete". You can select multiple phones and delete them at the same time. 2. Touch "Remove - 2012 Toyota Tundra | Navigation Manual - Page 263
not read the registered data. "Phonebook" is accessed from the "Phonebook Settings" screen. 1. Push the "SETUP" button. 2. Touch "Phone". You can other voice recognition. (For the operation of voice recognition, see "Speech command system" on page 44.) When you select the command of "Add New Phone", - 2012 Toyota Tundra | Navigation Manual - Page 264
" is accessed from the "Contacts" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". You can also display the "Contacts" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Touch "Manage Contacts". 4. Touch "Options - 2012 Toyota Tundra | Navigation Manual - Page 265
04.21 SETUP D Transferring a phone number You can transfer the phone numbers in your Bluetoothr phone to the system. The system. When you have touched "Replace Contacts": If your cellular phone does not support PBAP or OPP service, you can not use this function. If your phone supports PBAP service - 2012 Toyota Tundra | Navigation Manual - Page 266
11 04.21 SETUP When another Bluetoothr device is connected 4. In case that you have touched "Add Contacts", this screen is displayed. If you want to transfer another phonebook, - 2012 Toyota Tundra | Navigation Manual - Page 267
11 04.21 SETUP D Registering the phonebook data You can register the phonebook data. Up to 3 numbers per person can be registered. 1. Touch "New Contact". 3. Input the phone number - 2012 Toyota Tundra | Navigation Manual - Page 268
11 04.21 SETUP D Editing the phonebook data You can register the phone number in "Phone#1", "Phone#2" and "Phone#3" separately. 5. When two or less numbers in total are registered - 2012 Toyota Tundra | Navigation Manual - Page 269
11 04.21 SETUP You can also display the "Edit Contact" screen in the following ways. From "Contact Data" screen 1. Push the "INFO/PHONE" number. (See "D Registering the phonebook data" on page 268.) 5. When you complete the edit, touch "Save". 5. Touch "Options". 6. Touch "Edit Contact". 270 - 2012 Toyota Tundra | Navigation Manual - Page 270
11 04.21 SETUP From "Call History" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Call History". 4. Select the desired number from the list. D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 1. Touch "Delete - 2012 Toyota Tundra | Navigation Manual - Page 271
11 04.21 SETUP You can also delete it in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Yes". 5. Touch "Options". 6. Touch "Delete Contact". 272 - 2012 Toyota Tundra | Navigation Manual - Page 272
- Speed dials setting "Speed dials setting" is accessed from the "Speed Dials" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". 7. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will be deleted at the same time. 4. Touch "Manage - 2012 Toyota Tundra | Navigation Manual - Page 273
11 04.21 SETUP You can also display the "Speed Dials" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". number from phonebook. Up to 18 numbers per phone can be registered. 1. Touch "New Speed Dial". 4. Touch "Options". 2. Select the data you want to register. 274 - 2012 Toyota Tundra | Navigation Manual - Page 274
11 04.21 SETUP 3. Touch the desired phone number. 5. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to replace - 2012 Toyota Tundra | Navigation Manual - Page 275
11 04.21 SETUP You can also register the speed dial in the following ways. From "Speed Dial" screen 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". 6. - 2012 Toyota Tundra | Navigation Manual - Page 276
the desired data from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 5. Touch "Options". 6. Touch "Set Speed Dial". 277 - 2012 Toyota Tundra | Navigation Manual - Page 277
11 04.21 SETUP D Editing the speed dial You can edit the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Edit Speed Dials". 5. Touch "Save". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 278 - 2012 Toyota Tundra | Navigation Manual - Page 278
11 04.21 SETUP D Deleting the speed dial You can delete the speed dial. 3. Touch "Yes". 1. Touch "Delete Speed Dials". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 279 - 2012 Toyota Tundra | Navigation Manual - Page 279
11 04.21 SETUP - Deleting call history You can delete the call history. 1. Touch "Delete Call History". 3. Select the desired data or touch "Select All", then touch "Delete". You - 2012 Toyota Tundra | Navigation Manual - Page 280
" button. 2. Touch "Phone". 3. Touch "Call History". "Setting the voice tag" is done by displaying "Voice Tags" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". 4. Touch "Delete". 4. Touch "Manage Voice Tags". 5. This screen is displayed. The following operations are - 2012 Toyota Tundra | Navigation Manual - Page 281
11 04.21 SETUP You can also display "Voice Tags" screen in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". D Registering the voice tag You can register a voice tag for up to 20 numbers. 1. Touch "New Voice Tag". 4. Touch "Options". 2. Select the data - 2012 Toyota Tundra | Navigation Manual - Page 282
the list. 3. Touch "D REC", and record a voice tag. 5. Touch "Options". 4. Touch "" Play" to play the voice tag. When you complete the voice tag registration, touch "OK". INFORMATION When you use the voice tag, do not change the language setting from the language setting used when registering - 2012 Toyota Tundra | Navigation Manual - Page 283
D Editing the voice tag 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 1. Touch "Edit Voice Tags". 2. Select the data you want to edit. 3. This screen is displayed. The following operations are the same as the - 2012 Toyota Tundra | Navigation Manual - Page 284
- Bluetoothr D Deleting the voice tag You can confirm and change the Bluetoothr settings. 1. Push the "SETUP" button. 2. Touch "Phone". 1. Touch "Delete Voice Tags". 3. Touch "Bluetooth∗". ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 2. Select the desired data or touch "Select - 2012 Toyota Tundra | Navigation Manual - Page 285
SETUP The information displays the following items. "Device Name" ...The name in the Bluetoothr network. You can change it. "Passcode" ...The password when you register your cellular phone in the system. You can change it. "Device Address" ...The address peculiar to the system. You can not change - 2012 Toyota Tundra | Navigation Manual - Page 286
11 04.21 SETUP 1. Touch "Handsfree Power". 3. Touch "Save". In case that the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 2. Touch "On" or "Off". This screen is - 2012 Toyota Tundra | Navigation Manual - Page 287
11 04.21 SETUP Editing the device name Editing the passcode 1. Touch "Edit" of "Device Name". 1. Touch "Edit" of "Passcode and touch "OK". INFORMATION The device names are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the phone, the device name of the audio will - 2012 Toyota Tundra | Navigation Manual - Page 288
.21 SETUP D Initializing the Bluetoothr settings You can initialize the settings. If you connect a phone Bluetoothr audio is playing while 1. Touch "Default". This screen is displayed, and the Bluetoothr audio will stop temporarily. 2. Touch "Yes". If the state of "Handsfree Power" is changed - 2012 Toyota Tundra | Navigation Manual - Page 289
- Details You can do the detail settings. 1. Push the "SETUP" button. 2. Touch "Phone". D Incoming call display You can select the method of the incoming call display. 3. Touch "Details". 4. Do each setting according to the following - 2012 Toyota Tundra | Navigation Manual - Page 290
11 04.21 SETUP D The Bluetoothr connection status at start up 2. Touch "Full Screen" or "Drop Down". "Full Screen" mode ...When a call is received, the Hands−free screen is - 2012 Toyota Tundra | Navigation Manual - Page 291
11 04.21 SETUP D Initializing the settings You can initialize the settings. 1. Touch "Display Phone Status". 1. Touch "Default". 2. Touch "On" or "Off". 2. Touch "Yes". 292 - 2012 Toyota Tundra | Navigation Manual - Page 292
11 04.21 SETUP Audio Settings- -Select portable player The portable player to connect can be displayed when you choose the portable player. U007AHNS 1. Push the "SETUP" button. U10003GS U10025GS 2. Touch "Audio" on "Setup" screen. 4. Select desired portable player and then touch "OK". Although - 2012 Toyota Tundra | Navigation Manual - Page 293
11 04.21 SETUP D Displaying Bluetoothr information You can see or change the information of the portable player on the system. "Device Name" ...The name of Bluetoothr portable player which is displayed on the screen. You can change it into a desired name. "Device Address" ...The address peculiar - 2012 Toyota Tundra | Navigation Manual - Page 294
the portable player. From Portable Player: Connect the portable player to the audio system. The Bluetoothr audio settings can be set. D Registering your portable player U10008GS U10007GS 1. Touch "Bluetooth∗ Audio Setting" on "Audio Settings" screen. Select desired connection method "From Vehicle - 2012 Toyota Tundra | Navigation Manual - Page 295
SETUP When another Bluetoothr device is connected U10010GS 3. When this screen is displayed, enter the passcode displayed on the screen into the portable player. For the operation of the portable player, see the manual phone first or a connection failure may occur when registering the Bluetoothr - 2012 Toyota Tundra | Navigation Manual - Page 296
11 04.21 SETUP (a) Removing a Bluetoothr audio U10013GS 1. Touch "Remove" of "Bluetooth∗ Audio" on "BT Audio Settings" screen. U10016GS If the selected portable player is in use, this screen will appear. Touch "Yes". The system will disconnect the portable player and remove it. U10014GS 2. - 2012 Toyota Tundra | Navigation Manual - Page 297
is set to "From Portable Player". ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. When the engine switch is in the "ACC" or "ON" position, the selected portable player will be automatically connected and the connection result is displayed. MANUALLY When the auto connection failed or - 2012 Toyota Tundra | Navigation Manual - Page 298
11 04.21 SETUP (c) Changing the passcode The passcode for registering your portable player on the system. You can change this to 4 to 8 digit number of your choice. The default is "0000". (d) Changing the device name You can change a device name. Even if you change a device name, the name - 2012 Toyota Tundra | Navigation Manual - Page 299
the settings. When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components. (See page 27.) U10023GS U007AHNS 1. Touch "Default" on "BT Audio Settings" screen. 1. Push the "SETUP" button. U10024GS 2. Touch "Yes". 2. Touch - 2012 Toyota Tundra | Navigation Manual - Page 300
Maintenance information setting 1. Push the "SETUP" button. 2. Touch "Vehicle" on the "Setup" screen. 3. Touch "Maintenance" on system is set to give maintenance information with the "Information" screen. (See page 27.) When the vehicle needs to be serviced, the touch screen button color will change - 2012 Toyota Tundra | Navigation Manual - Page 301
"Brake oil": Replace brake fluid "Trans. fluid": Replace transmission fluid "Service": Scheduled maintenance "Air filter": Replace air filter maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, - 2012 Toyota Tundra | Navigation Manual - Page 302
(b) Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "SETUP" button. 2. Touch "Vehicle" on the "Setup" screen. 3. Touch "Maintenance" on the "Vehicle Settings" screen. 6. Touch "Edit" for - 2012 Toyota Tundra | Navigation Manual - Page 303
11 04.21 SETUP D To edit "Dealer" or "Contact" D To edit "Location" 1. Touch "Edit" of "Dealer" or "Contact". 1. Touch "Edit" of "Location". 2. Enter the name using the alphanumeric keys. - 2012 Toyota Tundra | Navigation Manual - Page 304
11 04.21 SETUP D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Phone #". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 305 - 2012 Toyota Tundra | Navigation Manual - Page 305
11 04.21 SETUP 306 - 2012 Toyota Tundra | Navigation Manual - Page 306
11 04.21 APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 9 308 310 Changing the map DVD−ROM ...319 307 - 2012 Toyota Tundra | Navigation Manual - Page 307
vehicle position on the map display. Tunnels, tall buildings, trucks, or even the placement of objects on the being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position reception of the antenna in the instrument panel. We advise - 2012 Toyota Tundra | Navigation Manual - Page 308
change of direction by going forward and backward, or turning on a turntable in the parking lot. D When leaving a covered position manually. guidance may not be available for the next turn changed. D An unnecessary U−turn may be shown or announced. D A location may have multiple names and the system - 2012 Toyota Tundra | Navigation Manual - Page 309
, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 253.) This navigation system uses tire turning data and is designed to Design is a registered trademark of Target Brands, Inc. The building footprints and related cartographic information in this product comes with - 2012 Toyota Tundra | Navigation Manual - Page 310
take reasonable steps to protect the DATABASE from misappropriation or misuse. You shall not extract stand−alone data from or publish any part of the You may not transfer the DATABASE to third parties, except together with the system for which it was created, provided that you do not retain any copy - 2012 Toyota Tundra | Navigation Manual - Page 311
USE OF THE DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE LIKE, REGARDLESS OF WHETHER THE contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. - 2012 Toyota Tundra | Navigation Manual - Page 312
greater limitations on the Government's rights shall control. Contractor/manufacturer is Tele Atlas North Information Act, or equivalent, which permits public access and/or reproduction or use of the Licensed clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be - 2012 Toyota Tundra | Navigation Manual - Page 313
controlled or approved by the United States Postal ServiceR. The following trademarks and registrations are owned by the USPS: United States Postal Service with vehicle navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service bureau, time− - 2012 Toyota Tundra | Navigation Manual - Page 314
, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic - 2012 Toyota Tundra | Navigation Manual - Page 315
11 04.21 APPENDIX Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export - 2012 Toyota Tundra | Navigation Manual - Page 316
NOTICE CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. (" information for solely personal, non−commercial purposes, and not for service bureau, time−sharing or other similar purposes. You may not - 2012 Toyota Tundra | Navigation Manual - Page 317
frequently change. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and - 2012 Toyota Tundra | Navigation Manual - Page 318
11 04.21 APPENDIX - Changing the map DVD−ROM U009AHNS U031AHNS 1. Push the "INFO/PHONE" button. 4. Insert a new map DVD−ROM with the label side up. U032AHNS 2. Touch "Map Data". 5. Push the "LOAD/CLOSE" button to close the display. 3. Touch " DVD". 319 - 2012 Toyota Tundra | Navigation Manual - Page 319
possibly injure people in the vehicle during sudden braking or in an accident. D To reduce the ejected. 2. Touch "Map Data". INFORMATION Under extremely cold conditions, the display may react slowly or operation sound covered area on the screen. Contact your Toyota dealer to find out if there - 2012 Toyota Tundra | Navigation Manual - Page 320
11 04.21 APPENDIX D Certification For vehicles sold in Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Category - 2012 Toyota Tundra | Navigation Manual - Page 321
11 04.21 APPENDIX 322 - 2012 Toyota Tundra | Navigation Manual - Page 322
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching an intersection. These - 2012 Toyota Tundra | Navigation Manual - Page 323
11 04.21 Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of , vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 308 through 309. 2 - 2012 Toyota Tundra | Navigation Manual - Page 324
become thoroughly familiar with it. Read the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when - 2012 Toyota Tundra | Navigation Manual - Page 325
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2012 Toyota Tundra | Navigation Manual - Page 326
11 04.21 Quick guide - - Overview buttons and guidance screen U0001AHSTN No. 1 2 3 4 Name North−up or heading−up symbol Scale indicator "DISP" button Zoom out button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This - 2012 Toyota Tundra | Navigation Manual - Page 327
building information. Push this button to display the "Information" screen. Touch this button to change the screen mode. Push this button to display the "Setup destination. XMr NavTraffic mark "GPS" mark (Global Positioning System) This mark is displayed when XMr NavTraffic information is received - 2012 Toyota Tundra | Navigation Manual - Page 328
11 04.21 - Registering home 1 Push the "DEST" button. U002AHNS 2 Touch "Go Home". If home has not been registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 52. 7 - 2012 Toyota Tundra | Navigation Manual - Page 329
"Enter". The "Edit Home" screen is displayed. 6 Touch "OK". Registration of home is complete. You can also register home by touching the "SETUP" button. (See " (a) Registering home" on page 103.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 104.) 8 - 2012 Toyota Tundra | Navigation Manual - Page 330
11 04.21 - Registering preset destinations 1 Push the "DEST" button. U002AHNS 2 Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset - 2012 Toyota Tundra | Navigation Manual - Page 331
". Registration of preset destinations is complete. You can also register preset destinations by touching the "SETUP" button. (See " (a) Registering preset destinations" on page 106.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 107.) The - 2012 Toyota Tundra | Navigation Manual - Page 332
11 04.21 - Operation flow: guiding the route 1 Push the "DEST" button. U002AHNS 2 There are 10 different methods to search destinations. See "Destination search" on page 52. 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes - 2012 Toyota Tundra | Navigation Manual - Page 333
be used if your home has been registered. (To register "Home", see " (a) Registering home" on page 103.) 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route - 2012 Toyota Tundra | Navigation Manual - Page 334
selected from a registered entry in the "Address book". (To register address book entries, see "(a) Registering address book entries" on page 109.) ...66 7 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...66 5 13 - 2012 Toyota Tundra | Navigation Manual - Page 335
11 04.21 8 "Intersection & Freeway" The names of two intersecting streets or a freeway (interstate) entrance or exit can be entered. This is helpful if only the general vicinity, not the specific address, is known...67 9 "Map" A destination can be selected simply by touching the location on the - 2012 Toyota Tundra | Navigation Manual - Page 336
) The items shown on the "Setup" screen can be set. To display the "Setup" screen, push the "SETUP" button. "General" Settings are available for language selection, operation sounds, automatic screen change, etc...236 1 "Vehicle" Settings are available for vehicle information such as maintenance - 2012 Toyota Tundra | Navigation Manual - Page 337
11 04.21 Quick reference ("Information" screen) This screen can be used to display the calendar and information on operation of the hands−free phone, etc. To display the "Information" screen, push the "INFO/PHONE" button. 1 "Phone" To view hands free phone information...127 2 "Map Data" Displays - 2012 Toyota Tundra | Navigation Manual - Page 338
11 04.21 17