2013 Toyota 4Runner Owners Manual - Page 565

2-4. Using other driving systems Messages displayed on the accessory meter Depending on switch operation, one of the following messages may appear on the accessory meter to provide guidance on transfer mode selection etc: Message SHIFT TO 4WD (When selecting MUD & SAND mode) SHIFT TO L4 (When selecting LOOSE ROCK, MOGUL or ROCK mode) STOP THE VEHICLE & SHIFT THE AUTO. TRANSMISSION TO N (When selecting any mode) ACCELERATE OR DECELERATE (When shifting the front-wheel control lever to H4 or H2) DRIVE THE VEHICLE A SHORT DISTANCE (When pressing the rear differential lock switch) OP. NOT POSSIBLE WHEN Multi-terrain Select ACTIVATED (When pressing the VSC off switch or "ATRAC" switch) 264 Details Indicates that the transfer mode needs to be changed to H4 or L4. Indicates that the transfer mode needs to be changed to L4. Procedure Shift the front-wheel drive control lever or switch to H4 or L4. Shift the front-wheel drive control lever or switch to L4. Indicates that the transfer mode cannot be changed to H4 or L4. Indicates that the transfer mode may not successfully change. Stop the vehicle completely and/or shift the shift lever to N. Drive straight ahead while accelerating or decelerating, or drive in reverse. Indicates that the rear differential is not locked. Indicates that VSC and active traction control cannot be disabled while Multi-terrain Select is operating. Drive the vehicle forward or backward a short distance. - 4RUNNER_U