2013 Toyota 4Runner Navigation Manual
2013 Toyota 4Runner Manual
2013 Toyota 4Runner manual content summary:
- 2013 Toyota 4Runner | Navigation Manual - Page 1
...Current position display ...Screen scroll operation (one−touch scroll) ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...Map icons ...D Speech command system ...33 33 33 39 41 42 43 43 44 Command list ...47 25 - 2013 Toyota 4Runner | Navigation Manual - Page 2
BASIC FUNCTIONS Initial screen When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few - 2013 Toyota 4Runner | Navigation Manual - Page 3
system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving images may be slightly distorted when the display is cold. D Under extremely cold conditions, the map may not be displayed and - 2013 Toyota 4Runner | Navigation Manual - Page 4
can be input via the touch screen. D To input letters and numbers To display the alphabet keys, touch "A−Z". INFORMATION Keyboard layout can be changed. (See page 214.) Enter letters by touching the keys directly. : Touching this button erases one letter. By holding this button, letters will - 2013 Toyota 4Runner | Navigation Manual - Page 5
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the system displays "∗∗" on the screen. 29 - 2013 Toyota 4Runner | Navigation Manual - Page 6
BASIC FUNCTIONS D List screen operation When a list is displayed, use the appropriate button to scroll through the list. D Sorting The order of a list displayed on the screen can be rearranged. To shift to the next or previous page. Touch or to scroll through 1. Touch "Sort". the displayed list - 2013 Toyota 4Runner | Navigation Manual - Page 7
BASIC FUNCTIONS Screen adjustment You can adjust the contrast and brightness of the screen. You can also turn the display off, and change the screen to either day or night mode. D Contrast and brightness adjustment The contrast and brightness of the screen can be adjusted depending on the - 2013 Toyota 4Runner | Navigation Manual - Page 8
in day mode even with the headlight switch on, touch "Day Mode" on the adjustment screen for brightness and contrast control. If the screen is set in day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. . 2. Touch the button of - 2013 Toyota 4Runner | Navigation Manual - Page 9
any screen by pushing the "MAP·VOICE" button. While driving, the current vehicle position mark is fixed on the screen and the map moves. The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is - 2013 Toyota 4Runner | Navigation Manual - Page 10
the cursor position as an address book entry Address book entry registration enables easy access to a specific point. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) Touch "Mark - 2013 Toyota 4Runner | Navigation Manual - Page 11
BASIC FUNCTIONS To change the icon or name, etc., see " (b) Editing address book entries" on page 108. Up to 100 address book entries can be registered. If there is - 2013 Toyota 4Runner | Navigation Manual - Page 12
BASIC FUNCTIONS POI INFORMATION When the cursor is set on a POI icon, the name and "Info." are displayed at the top of the screen. INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 90.) Touch "Info.". Information such as the name, - 2013 Toyota 4Runner | Navigation Manual - Page 13
BASIC FUNCTIONS ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Information such as the name, address, and phone number are displayed. If "Enter " is touched, the position of the cursor is set as a - 2013 Toyota 4Runner | Navigation Manual - Page 14
XMr NavTraffic TEXT INFORMATION When you touch the XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Touch "Info.". Touch "Info.". Information such as the name, address, and phone number are displayed. To delete a destination, touch "Delete - 2013 Toyota 4Runner | Navigation Manual - Page 15
BASIC FUNCTIONS - Switching the screens Any one of the screen configurations can be selected. Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 40.) : To display the dual map screen. (See page 40.) : To display the - 2013 Toyota 4Runner | Navigation Manual - Page 16
any specific point on the right side map. This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 96.) 4. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the - 2013 Toyota 4Runner | Navigation Manual - Page 17
of the destination. or until the scale bar Touch changes normally. By continuing to touch the button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving. The map scale is displayed under the north−up - 2013 Toyota 4Runner | Navigation Manual - Page 18
the foot print map changes into when the map is scaled down to 150 feet (50 m). D To display building information Information is available only for buildings area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one - 2013 Toyota 4Runner | Navigation Manual - Page 19
BASIC FUNCTIONS - Orientation of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol at the top left of the screen. Touch or . -Map icons Icon Name Island - 2013 Toyota 4Runner | Navigation Manual - Page 20
BASIC FUNCTIONS Speech command system - The speech command system enables you to operate the navigation system, audio system and hands−free system by giving a command. 2. After a beep sounds, say the command of your choice. Speech commands are marked with . 1. Push the talk switch. After a beep - 2013 Toyota 4Runner | Navigation Manual - Page 21
the screen. If a desired outcome is not shown, or if no choices are available, say "Go back" or touch "Go Back" to return to the previous screen touch "Cancel", or push and hold the talk switch. If the navigation system does not respond or the confirmation screen does not disappear, please push the - 2013 Toyota 4Runner | Navigation Manual - Page 22
recognize the command properly and using speech commands may not be possible. D The command is not correct or 3. Touch "Enter" or say "Enter", and the system starts searching for a route to your home. To return to the "Voice Menu" screen, say "Go back" or touch "Go Back". Touch "Cancel" or say - 2013 Toyota 4Runner | Navigation Manual - Page 23
a voice recognition command list. You can operate the voice recognition system by saying any command from the displayed command list. However, the XMr NavTraffic commands cannot be used where the XMr NavTraffic service is not available. (For details, see "XMr NavTraffic" page 96.) 1. Push the talk - 2013 Toyota 4Runner | Navigation Manual - Page 24
:Changing map scale 1. Push the talk switch. 2. Say "Command list". 3. Say "Dual map". To confirm commands on the screen, touch or to scroll through the 3. Say "Zoom in" or "Zoom out". To confirm commands on the screen, touch or to scroll through the command list. This function is available - 2013 Toyota 4Runner | Navigation Manual - Page 25
DESTINATION SEARCH SECTION DESTINATION SEARCH D Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Preset destinations ...Destination search by "Address" ...Destination search by "Point of Interest" ...Destination search by "Previous Destinations" - 2013 Toyota 4Runner | Navigation Manual - Page 26
DESTINATION SEARCH Destination search - - Selecting the search area Change the selected region in order to set a destination from a different region by using "Address", "Point of Interest" or "Intersection & Freeway". Push the "DEST" button. 1. Touch " - 2013 Toyota 4Runner | Navigation Manual - Page 27
New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan Ohio Wisconsin Arkansas Alabama Louisiana Mississippi Tennessee Connecticut Massachusetts Maine New Hampshire New Jersey New York Rhode Island Vermont "US10 - 2013 Toyota 4Runner | Navigation Manual - Page 28
not been registered, a message will be displayed and the setting screen will automatically appear. To use this function, it is necessary to set a "Home" even while driving. 2. Touch any of the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays - 2013 Toyota 4Runner | Navigation Manual - Page 29
DESTINATION SEARCH - Destination search by "Address" There are 2 ways to search a destination by address. (a) Search by city (b) Search by street address 1. Push the "DEST" button. 2. Touch "Address" on the "Destination" screen. (a) Selecting a city to search 1. Push the "DEST" button. 2. Touch " - 2013 Toyota 4Runner | Navigation Manual - Page 30
Input the street name and touch "OK". 8. Input a house number. 7. When the desired street name is found, touch the corresponding button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) If the same - 2013 Toyota 4Runner | Navigation Manual - Page 31
5 Cities". 3. Touch "Street Address". 2. Touch the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See "(a) Selecting a city to search" on page 53.) 4. Touch - 2013 Toyota 4Runner | Navigation Manual - Page 32
and the route preference. (See "Starting route guidance" on page 70.) If the same address exists in more than one city, the current screen changes inputting the city name or to the address list screen. 8. Touch the button of the desired city name from the displayed list. INFORMATION You can - 2013 Toyota 4Runner | Navigation Manual - Page 33
the button for the desired method. 4. Input the name of the Point of Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) When inputting the name - 2013 Toyota 4Runner | Navigation Manual - Page 34
DESTINATION SEARCH D Selecting a city to search Touch the button of the desired destination. If the same name exists in more than one city, a search can be performed more easily with "City" and "Category". (See "D Selecting a city to search" on page 58 and "D Selecting from the categories" on page - 2013 Toyota 4Runner | Navigation Manual - Page 35
DESTINATION SEARCH D Selecting from the categories (b) Search by "Category" The destination can be set by selecting the search point and the POI category. 1. Push the "DEST" button. 2. Touch "Point of Interest" on the "Destination" screen. 3. Touch "Category" on the "Point of Interest" screen. - 2013 Toyota 4Runner | Navigation Manual - Page 36
DESTINATION SEARCH SETTING THE SEARCH POINT FROM NEAR HERE Touch "Near Here". The search point is set at the current position, and the "POI Category" screen will be displayed. (See page 62.) SETTING THE SEARCH POINT FROM ALONG MY ROUTE Touch "Along My Route". The search point is set and the "POI - 2013 Toyota 4Runner | Navigation Manual - Page 37
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES 1. Touch "Near City Center". SETTING THE SEARCH POINT FROM NEAR A DESTINATION 1. Touch "Near a Destination". 2. Touch "Last 5 Cities". 2. Touch the button of the desired destination. The search point is set and the "POI Name" screen will be - 2013 Toyota 4Runner | Navigation Manual - Page 38
screen, touch "List All Categories" to list all POI categories. 4. Input a telephone number. 5. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) If there - 2013 Toyota 4Runner | Navigation Manual - Page 39
the button of the desired destination. "Delete": To delete the previous destination. (To delete previous destinations, see page 117.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) INFORMATION The - 2013 Toyota 4Runner | Navigation Manual - Page 40
the "DEST" button. 2. Touch "Emergency" on the second page of the "Destination" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers, hospitals, or fire stations are shown. The current position is - 2013 Toyota 4Runner | Navigation Manual - Page 41
4. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2013 Toyota 4Runner | Navigation Manual - Page 42
the destination to be set. 5. Touch "OK". 8. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) 6. Touch the button - 2013 Toyota 4Runner | Navigation Manual - Page 43
screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the (I−405). US highways use the state designation before the number (CA−118). 5. Select the desired freeway by touching the button. - 2013 Toyota 4Runner | Navigation Manual - Page 44
entrance or exit name. 8. Touch "OK". Guidance starts if "OK" is touched even while driving. However, the cursor cannot be moved. 9. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See - 2013 Toyota 4Runner | Navigation Manual - Page 45
Input the latitude and the longitude. 4. When the input is finished, touch "OK". By touching the button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 70.) 3. Touch the destination - 2013 Toyota 4Runner | Navigation Manual - Page 46
DESTINATION SEARCH Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. INFORMATION Set destinations can also - 2013 Toyota 4Runner | Navigation Manual - Page 47
traffic congestion. D Route guidance may not be available if there is no road data for the specified location. D When setting the destination on a map with a scale larger than 0.5 miles (800 m), the map scale changes to 0.5 miles (800 m) automatically. Set the destination again. D If a destination - 2013 Toyota 4Runner | Navigation Manual - Page 48
DESTINATION SEARCH 3 ROUTES SELECTION 1 1. To select the desired route from 3 routes, touch "3 Routes". 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 2. Touch "Quick", "Alt." or "Short" to select the desired route. "Quick": Recommended route. - 2013 Toyota 4Runner | Navigation Manual - Page 49
route You can again designate the conditions of the vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. Touch "Edit Route". "Add": To add destinations. (See conditions which the system uses to determine the route to the destination. (See page 87.) 73 - 2013 Toyota 4Runner | Navigation Manual - Page 50
DESTINATION SEARCH 74 - 2013 Toyota 4Runner | Navigation Manual - Page 51
ROUTE GUIDANCE SECTION ROUTE GUIDANCE 3 D Route guidance screen ...76 D Typical voice guidance prompts ...79 D Distance and time to destination ...81 D Setting and deleting destinations ...82 Adding destinations ...Reordering destinations ...Deleting destinations ...D Setting route ...Detour - 2013 Toyota 4Runner | Navigation Manual - Page 52
screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout D During freeway driving During freeway driving, the freeway exit information screen will be displayed. This screen displays the distance to the next junction and exit, or POIs - 2013 Toyota 4Runner | Navigation Manual - Page 53
ROUTE GUIDANCE D When approaching a freeway exit or junction When the vehicle approaches an exit or junction, the guidance screen for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. - 2013 Toyota 4Runner | Navigation Manual - Page 54
screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. Touching during guidance displays the arrow screen - 2013 Toyota 4Runner | Navigation Manual - Page 55
D The street names may not be pronounced correctly or clearly due to text−to−speech function. D On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow time to maneuver. 79 - 2013 Toyota 4Runner | Navigation Manual - Page 56
−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non−residential areas. 1 The system announces the approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished - 2013 Toyota 4Runner | Navigation Manual - Page 57
the destination are displayed. When the vehicle is not on the guidance route, the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, the distance and the estimated travel/arrival time from the current position to each - 2013 Toyota 4Runner | Navigation Manual - Page 58
the arrival order of the additional destination. 3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 82 - 2013 Toyota 4Runner | Navigation Manual - Page 59
the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch "Route". 2. Touch "Delete". When more than one destination is set - 2013 Toyota 4Runner | Navigation Manual - Page 60
- Detour setting While the route guidance is operating, you can change the route to detour around a section of the route where detour process. After detouring, the system returns to the original guidance route. "Whole Route": By touching this button, the system will calculate an entire new route to - 2013 Toyota 4Runner | Navigation Manual - Page 61
ROUTE GUIDANCE - Route overview 1. Touch "Route". This picture shows an example of how the system would guide around a delay caused by a traffic jam. 1 This position indicates the location of a traffic jam caused by road repairs or an accident. 2 This route indicates the - 2013 Toyota 4Runner | Navigation Manual - Page 62
, not all 1. Touch "Route". road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting - 2013 Toyota 4Runner | Navigation Manual - Page 63
ROUTE GUIDANCE - Route preference D To select route type You can designate the route conditions of the route to the destination. : To indicate the next destination. : To preview the route to the next destination. : To preview the - 2013 Toyota 4Runner | Navigation Manual - Page 64
of choices are provided on the conditions which the system uses to determine the route to the destination. The entire route from the starting point to the destination is displayed. "OK": To start guidance. "Edit Route": To change a route. (See page 73.) 1. Touch "Route". 2. Touch "Preferences" to - 2013 Toyota 4Runner | Navigation Manual - Page 65
ROUTE GUIDANCE - Pausing and resuming guidance D Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. Touch "Route - 2013 Toyota 4Runner | Navigation Manual - Page 66
icons D To resume guidance Points of Interest such as gas stations and restaurants can be displayed on the map screen. Change POI" is displayed. The screen will change to the current position map with route guidance. A screen with a limited choice of Points of Interest will be displayed. (To change - 2013 Toyota 4Runner | Navigation Manual - Page 67
Other POIs": If the desired Point of Interest can not be found on the limited choice screen, touch this button. "Find Local POI": When searching for the Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 92.) - 2013 Toyota 4Runner | Navigation Manual - Page 68
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2013 Toyota 4Runner | Navigation Manual - Page 69
as a straight line from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 70.) 93 - 2013 Toyota 4Runner | Navigation Manual - Page 70
It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). 1. Touch "Show on Map". 2. Touch "POI Icons". The "POI Icons" indicator is - 2013 Toyota 4Runner | Navigation Manual - Page 71
ROUTE GUIDANCE D To start recording the route trace D To stop recording the route trace 1. Touch "Show on Map". 1. Touch "Show on Map". 2. Touch "Route Trace". "Route Trace" indicator is highlighted. 2. Touch "Route Trace". The following screen will be displayed. Touching "Yes" stops - 2013 Toyota 4Runner | Navigation Manual - Page 72
display traffic information on the map is available if your satellite radio tuner can receive traffic information. To receive the XMr NavTraffic service, a subscription to the XMr Satellite Radio with NavTraffic is necessary. The XMr NavTraffic is available in the contiguous 48 U.S. states and some - 2013 Toyota 4Runner | Navigation Manual - Page 73
ROUTE GUIDANCE D Show XMr NavTraffic information XMr NavTraffic information is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 97 - 2013 Toyota 4Runner | Navigation Manual - Page 74
indicator When any XMr NavTraffic information has been received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been received. "Yellow": Traffic restriction information on the - 2013 Toyota 4Runner | Navigation Manual - Page 75
MY PLACES SECTION MY PLACES D Navigation settings ...Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 100 101 103 106 112 117 99 - 2013 Toyota 4Runner | Navigation Manual - Page 76
MY PLACES Navigation settings - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 52, " - Destination search by Preset destinations" on page 52 and " - Destination search by "Address Book"" on - 2013 Toyota 4Runner | Navigation Manual - Page 77
MY PLACES - Setting up the "Home" If home has been registered, that information can be recalled by using the "Go Home" touch screen button on the "Destination" screen. (See "- Destination search by Home" on page 52.) 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. (a) - 2013 Toyota 4Runner | Navigation Manual - Page 78
" screen. 6. Touch "OK". To edit registered information, see "(b) Editing home" on page 102. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be displayed on the map. (See page 110.) "Location": To edit location information. (See page 111 - 2013 Toyota 4Runner | Navigation Manual - Page 79
MY PLACES - Setting up the "Preset Destinations" (c) Deleting home 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Home" on the "Navigation Settings" screen. If preset destination has been registered, that information can be recalled by using the "Preset Destination" - 2013 Toyota 4Runner | Navigation Manual - Page 80
MY PLACES (a) Registering preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. When registration of preset destination is completed, the "Edit Preset Destination" screen will be displayed. 7. - 2013 Toyota 4Runner | Navigation Manual - Page 81
." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names can be displayed on the map. (See page 110.) "Location": To edit location information - 2013 Toyota 4Runner | Navigation Manual - Page 82
MY PLACES - Setting up the "Address Book" (c) Deleting preset destinations 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Preset Destinations" on the "Navigation Settings" screen. Points or areas on the map can be registered. 1. Push the "SETUP" button. 2. Touch "Navi - 2013 Toyota 4Runner | Navigation Manual - Page 83
MY PLACES (a) Registering address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "OK". To edit registered information, see "(b) Editing address book entries" on page 108. INFORMATION 4. Touch " - 2013 Toyota 4Runner | Navigation Manual - Page 84
" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can be displayed on the map. (See page 110.) "Location": To edit location information - 2013 Toyota 4Runner | Navigation Manual - Page 85
Touch "Edit" of "Icon". 2. Touch the desired sound icon. The next screen appears when "Bell (with Direction)" is touched. 2. Touch the desired icon. Change pages by touching "Page 1", "Page 2" or "With Sound" tab. Touch either or to adjust the direction. Touch "OK". The bell sounds only when - 2013 Toyota 4Runner | Navigation Manual - Page 86
MY PLACES D To change "Name" DISPLAYING MEMORY POINT NAMES The name of an address book entry can be set to display on the map. 1. Touch "Edit" of "Name". To - 2013 Toyota 4Runner | Navigation Manual - Page 87
MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch one of the 8 directional touch screen buttons to move the cursor to the - 2013 Toyota 4Runner | Navigation Manual - Page 88
MY PLACES - Setting up the "Areas to Avoid" (c) Deleting address book entries 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. Areas you want to avoid because of traffic jams, construction work or other reasons can be - 2013 Toyota 4Runner | Navigation Manual - Page 89
avoided. (See "Destination search" on page 50.) 8. Touch either or to change the size of the area to be avoided. 9. Touch "OK". INFORMATION D input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be - 2013 Toyota 4Runner | Navigation Manual - Page 90
"SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Areas to Avoid" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit the name of the area to avoid. The names can be displayed on the map. (See page 115.) "Location": To edit area - 2013 Toyota 4Runner | Navigation Manual - Page 91
MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be - 2013 Toyota 4Runner | Navigation Manual - Page 92
screen to the debutton to move the cursor sired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 116 - 2013 Toyota 4Runner | Navigation Manual - Page 93
"Delete". 5. Touch the button to be deleted. "Select All": To select all registered areas to avoid in the system. "Unselect All": To unselect all registered areas to avoid in the system. 6. Touch "Delete". 7. To delete the area, touch "Yes". To cancel the deletion, touch "No". 4. Touch the button - 2013 Toyota 4Runner | Navigation Manual - Page 94
MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 118 - 2013 Toyota 4Runner | Navigation Manual - Page 95
SECTION TELEPHONE AND INFORMATION D Telephone (Hands−free system for cellular phone) ...Enter a Bluetoothr phone ...Call on the Bluetoothr phone ...Receive on the Bluetoothr phone ...Talk on the Bluetoothr phone ...D Fuel consumption ...Past record ...Consumption ...D Calendar ... 5 120 126 - 2013 Toyota 4Runner | Navigation Manual - Page 96
−free at the same time, the following problems may occur. D The Bluetoothr connection may be cut. D Noise may be heard on the Bluetoothr audio playback. CAUTION D While driving, do not use a cellular phone or connect the Bluetoothr phone. D An antenna for the Bluetoothr connection is built in the - 2013 Toyota 4Runner | Navigation Manual - Page 97
off the steering wheel. D PBAP (Phone Book Access Profile) Ver.1.0 If your cellular phone does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota.com/ bluetooth" to find approved Bluetoothr phones for this system. 121 - 2013 Toyota 4Runner | Navigation Manual - Page 98
of the air−conditioning fan is loud. D There is an effect from the network of the cellular phone. You can use the microphone above when talking on the phone. The other party's voice outputs from the front speaker. When the received calls or received voice outputs, the audio from the audio system or - 2013 Toyota 4Runner | Navigation Manual - Page 99
you are out of the service area or in a place inaccessible by radio waves, "No Service" is displayed. An antenna for the Bluetoothr connection is glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" - 2013 Toyota 4Runner | Navigation Manual - Page 100
complies with part 15 of Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits antenna or transmitter. 124 - 2013 Toyota 4Runner | Navigation Manual - Page 101
1551A−DNNS025 Type : DNNS025 CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non avec les directives sur RSS−102 des règles sur l'exposition aux fréquences radio (RF). Cet équipement présente de très faibles niveaux d'énergie RF - 2013 Toyota 4Runner | Navigation Manual - Page 102
- Enter a Bluetoothr phone To use the hands−free system, you need to enter your phone into the system. Once you have registered it, you can make a phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". 2. Touch " - 2013 Toyota 4Runner | Navigation Manual - Page 103
TELEPHONE AND INFORMATION D Connecting a Bluetoothr phone AUTOMATICALLY 5. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. When you register your phone, auto connection will be turned on. Always set it to this mode and - 2013 Toyota 4Runner | Navigation Manual - Page 104
off, you have to connect Bluetoothr manually. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, a nearby cellular phone you have registered is searched for. Next, the system automatically connects with the latest of the - 2013 Toyota 4Runner | Navigation Manual - Page 105
TELEPHONE AND INFORMATION When you connect the phone while Bluetoothr audio is playing 5. The "Connect Bluetooth∗" screen is displayed. This screen is displayed, and the Bluetoothr audio will stop temporarily. 6. When the connection is completed, this screen is displayed. Now you can use the - 2013 Toyota 4Runner | Navigation Manual - Page 106
Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the Bluetoothr phone. After you enter the Bluetoothr phone, you can call by using hands−free system. You can call using the 6 methods described below. D By dial You - 2013 Toyota 4Runner | Navigation Manual - Page 107
can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in total of phonebooks. This cannot be operated while driving. 3. Touch the desired key to input the phone number. , an inputted Each time - 2013 Toyota 4Runner | Navigation Manual - Page 108
TELEPHONE AND INFORMATION When the phonebook is empty 3. Select the desired number from the list. Touch wheel. or push of the steering 1. Touch "Contacts". 2. Touch "Yes" if you want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 132 - 2013 Toyota 4Runner | Navigation Manual - Page 109
which you called You can call using the latest 5 call history items shown by "All" while driving. 1. Touch "Speed Dials". 1. Touch "Call History". 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 2. Select the desired data from the - 2013 Toyota 4Runner | Navigation Manual - Page 110
wheel to display the "Phone" screen. 2. Push of the steering wheel to display the "Call History" screen. 3. Push of the steering wheel to select the latest history item. 3. Touch steering wheel calls are also memorized in the system. D A international phone call may not be made depending on - 2013 Toyota 4Runner | Navigation Manual - Page 111
data" on page 243. You can call by giving a command. (For the operation and command of voice recognition, see "Speech command system" on page 44.) This can be operated while driving. The "Dial by Name" operating procedure is explained here. Other operating procedures are also similar. 135 - 2013 Toyota 4Runner | Navigation Manual - Page 112
the talk switch. of the steering wheel. D Push D Touch "Cancel". (Except for recogniz- You: System: Push the talk switch. "After the Destination", ing the command.) D Say "Cancel". "Phone", "Audio" or "Command List"." "(beep)" You: "Phone." System: "Phone." "Say a command." "Such as "Dial by - 2013 Toyota 4Runner | Navigation Manual - Page 113
on the Bluetooth r phone D By POI* call You can call by touching when it is displayed on the screen from navigation system. (See "POI INFORMATION" on page 36 for details.) *: Point of Interest When a call is received, this screen is displayed with a sound. Touch or push of the steering wheel to - 2013 Toyota 4Runner | Navigation Manual - Page 114
up the phone: Touch or push of the steering wheel. To mute your voice: Touch "Mute". To input a Key: Touch "0−9". To transfer the call: Touch "Call Transfer". You cannot change from Hands−free call to cellular phone call while driving. When you change from cellular phone call to Hands−free call, the - 2013 Toyota 4Runner | Navigation Manual - Page 115
appears. To hang up the phone: Touch or push of the steering wheel. The continuous tone signal is the marked sign (p or w) and operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the system" on page 44.) 139 - 2013 Toyota 4Runner | Navigation Manual - Page 116
AND INFORMATION D Interrupt call When the call is interrupted by the third party while talking, this screen is displayed. Touch or push of the steering wheel to start talking with the other party. Touch or push wheel to refuse the call. of the steering Everytime you touch or push of the steering - 2013 Toyota 4Runner | Navigation Manual - Page 117
"Past Record". 1. Push the "INFO·PHONE" button. 2. Touch "Fuel Consumption". "Past Record" screen will be displayed. 1 Fuel economy since the last reset 2 Current fuel economy 3 Best recorded fuel economy The average fuel consumption history is divided by color into past averages and the average - 2013 Toyota 4Runner | Navigation Manual - Page 118
does not appear, touch "Consumption". "Consumption" screen will be displayed. 1 Fuel consumption in the past 30 minutes 2 Cruising range Average fuel consumption is divided by color into past averages and averages attained since the "ENGINE START STOP" switch was last turned to IGNITION ON mode - 2013 Toyota 4Runner | Navigation Manual - Page 119
INFORMATION Calendar To view calendar. 1. Push the "INFO·PHONE" button. 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month will be displayed). 143 - 2013 Toyota 4Runner | Navigation Manual - Page 120
TELEPHONE AND INFORMATION 144 - 2013 Toyota 4Runner | Navigation Manual - Page 121
AUDIO SYSTEM SECTION AUDIO SYSTEM 6 147 154 159 165 177 186 194 D Quick reference ...146 D Using your audio system ...147 Some basics ...Radio operation ...Radio operation (XMr Satellite Radio broadcast) ...CD changer operation ...Bluetoothr audio operation ...USB memory/iPod operation ...D Audio - 2013 Toyota 4Runner | Navigation Manual - Page 122
3 "CD" button Push this button to turn the CD changer on. For details, see pages 149 and 168. Function menu display screen To control the radio, CD changer, Bluetoothr audio player, AUX, USB memory or iPod, touch the touch− screen buttons. For details, see page 150. Function menu tab To control the - 2013 Toyota 4Runner | Navigation Manual - Page 123
. Some information may not pertain to your system. Your audio system works when the "ENGINE START STOP" switch is turned to ACCESSORY or IGNITION ON mode. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not expressly - 2013 Toyota 4Runner | Navigation Manual - Page 124
the switch above, you can operate the speech command system. For the operation of the speech command system and the list of commands, see pages 44 and 47. NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. 148 - 2013 Toyota 4Runner | Navigation Manual - Page 125
to display touch−screen buttons for audio system (audio control mode). "POWER/VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume. The system turns on in the last mode used. You can select the function that enables automatic return to the previous screen - 2013 Toyota 4Runner | Navigation Manual - Page 126
set, the CD changer does not turn on. You can turn off the CD changer by ejecting all the discs. If the audio system was previously off, then the entire audio system will be turned off when you eject all the discs. If the other function was previously playing, it will come on again - 2013 Toyota 4Runner | Navigation Manual - Page 127
AUDIO SYSTEM The touch−screen buttons for radio, CD changer, Bluetoothr audio player, AUX, USB memory or iPod operation are displayed on the function touch−screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. Touch the tab to select - 2013 Toyota 4Runner | Navigation Manual - Page 128
display this screen. 4. Select "On" of the "Automatic Sound levelizer". 5. Touch "OK". Automatic sound levelizer (ASL): When the audio sound becomes difficult to hear due to road noise, wind noise or other noises while driving, select "On". The system adjusts to the optimum volume and tone quality - 2013 Toyota 4Runner | Navigation Manual - Page 129
AUDIO SYSTEM U6007GS 1. Touch "Sound" tab to display this screen. 2. Touch the desired button. "Treble" "+" or "-": Adjust high−pitched tones. "Mid" "+" or "-": Adjust mid−pitched tones. "Bass" "+" or "-": Adjusts low−pitched tones. "Front" or "Rear": Adjusts sound balance between the front part of - 2013 Toyota 4Runner | Navigation Manual - Page 130
audio player is not connected to the AUX port, the tab will tone down. For details, refer to the "Owner's Manual". (h) USB port It is available iPod" on page 187. (a) Listening to the radio Push the "AM" or "FM" button or push the "AUDIO" button to display audio screen and touch the "AM" or "FM" - 2013 Toyota 4Runner | Navigation Manual - Page 131
AUDIO SYSTEM Turn the knob clockwise to step up the station band or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is received. "ST" appears on the screen. If the signal becomes weak, the radio reduces the amount of channel separation to - 2013 Toyota 4Runner | Navigation Manual - Page 132
a few seconds, and then move to the next preset station. To select a station, touch "SCAN" again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text messages from radio stations that utilize RDS transmitters. When RDS is on, the - 2013 Toyota 4Runner | Navigation Manual - Page 133
AUDIO SYSTEM "Type A "" If the system receives no RDS stations, "NO−PTY" appears on the display. Each time you touch "A Type " or "Type "", the program type changes Blues) D RELIGION D ALART (Emergency message) "TypeSeek" When a program is set, "Type Seek" appears. Touch the switch and the system - 2013 Toyota 4Runner | Navigation Manual - Page 134
AUDIO SYSTEM (e) Traffic announcement "Message" If the system receives a radio text from RDS station, "MSG" appears on the display. Touch "Message", and a text message is displayed on the screen. This function is available only when the vehicle is not moving. When you touch "Message Off", the - 2013 Toyota 4Runner | Navigation Manual - Page 135
vehicle, a subscription to the XMr Satellite Radio service is necessary. (a) How to subscribe to an XMr Satellite Radio An XMr Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and - 2013 Toyota 4Runner | Navigation Manual - Page 136
AUDIO SYSTEM (c) Listening to satellite radio (d) Channel category Touch either "A Type" or "Type "" to go to the next or previous category. Push the "SAT" button or push the "AUDIO" button to display audio screen and touch the "SAT" tab to choose a SAT channel. "SAT1", "SAT2" or "SAT3" appears - 2013 Toyota 4Runner | Navigation Manual - Page 137
AUDIO SYSTEM (e) Presetting a channel Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same the power source is interrupted by battery disconnection or a blown fuse. (f) Selecting a channel Tune in the desired channel using - 2013 Toyota 4Runner | Navigation Manual - Page 138
AUDIO SYSTEM (g) Displaying the title and name When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "Text" again, the display returns. 162 - 2013 Toyota 4Runner | Navigation Manual - Page 139
AUDIO SYSTEM (h) If the satellite radio tuner malfunctions When problems occur with the XMr tuner, a message will appear on the display. Referring to the table below to identify the problem, take the suggested corrective action. The XMr antenna is not connected. Check whether the XMr antenna cable - 2013 Toyota 4Runner | Navigation Manual - Page 140
AUDIO SYSTEM NOTICE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, - 2013 Toyota 4Runner | Navigation Manual - Page 141
AUDIO SYSTEM - CD changer operation (a) Inserting discs The "ENGINE START STOP" switch must be in ACCESSORY or IGNITION ON mode. Your the indicators change to green, you can insert the next disc. 4. Push the "LOAD· /CLOSE" button to close the display. The changer will automatically start playing - 2013 Toyota 4Runner | Navigation Manual - Page 142
sudden stop while driving, keep the display closed. D Take care not to jam your hand while the display is moving. Otherwise, you could be injured. (b) Ejecting discs D A single disc alone: NOTICE D Do not obstruct the display while it is moving. It could damage your audio system. D Do not insert - 2013 Toyota 4Runner | Navigation Manual - Page 143
AUDIO SYSTEM D All the discs: 3. Remove the disc. The indicators start blinking again and the next disc is ejected. If a disc is not removed within 15 seconds after it is ejected, the operation will be canceled. When all the discs are removed, the amber indicators change to green. A disc can be - 2013 Toyota 4Runner | Navigation Manual - Page 144
AUDIO SYSTEM (c) Playing a disc (d) Selecting a desired disc U6021GS Touch "Change Discs" on "CD" screen and touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the - 2013 Toyota 4Runner | Navigation Manual - Page 145
AUDIO SYSTEM (e) Playing an audio disc Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an audio disc number to display this screen. from a list. This function is available only when the vehicle is not moving. Touch "Select". The track list is displayed. - 2013 Toyota 4Runner | Navigation Manual - Page 146
AUDIO SYSTEM Touch the desired track number. The changer will start playing the a second while the disc is playing. "D.SCAN" appears on the screen. The program at the beginning of each audio disc will be played for 10 seconds. To continue listening to the program of your choice, touch "SCAN" on - 2013 Toyota 4Runner | Navigation Manual - Page 147
AUDIO SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic repeat of the track or disc you are currently listening to. Repeating a track - Touch "RPT" briefly while the track is playing. "RPT" appears on the screen. When the track is finished, the changer will automatically go back to the beginning - 2013 Toyota 4Runner | Navigation Manual - Page 148
AUDIO SYSTEM (f) Playing a MP3/WMA disc SELECTING A DESIRED FOLDER "FolderY": Touch list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an MP3 - 2013 Toyota 4Runner | Navigation Manual - Page 149
AUDIO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until - 2013 Toyota 4Runner | Navigation Manual - Page 150
AUDIO SYSTEM U6027GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. Touch the desired file number. The changer will start playing the - 2013 Toyota 4Runner | Navigation Manual - Page 151
AUDIO SYSTEM SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on the screen. The changer will play the - 2013 Toyota 4Runner | Navigation Manual - Page 152
AUDIO SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating a file - Touch "RPT" briefly while the file is playing. "RPT" appears on the screen. When the file is finished, the changer will automatically go back to the beginning of - 2013 Toyota 4Runner | Navigation Manual - Page 153
MP3/WMA files are played. The Bluetoothr audio system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication. This audio system supports Bluetoothr, a wireless data system capable of playing portable audio music without cables. If your portable - 2013 Toyota 4Runner | Navigation Manual - Page 154
connected to the Bluetoothr audio system. However, please note that some functions may be limited depending on the type bluetooth" to find approved Bluetoothr phones for this system. CAUTION D Do not operate the player's controls or connect to the Bluetoothr audio system while driving. D An antenna - 2013 Toyota 4Runner | Navigation Manual - Page 155
seat or in the glove box or console box). D Your portable player touches or is covered with metal materials. Leave the Bluetoothr portable player in a place where the "Blue" indication is displayed. The portable player information is registered when the Bluetoothr audio system is connected. When you - 2013 Toyota 4Runner | Navigation Manual - Page 156
AUDIO SYSTEM D For vehicles sold in U.S.A. FCC ID : HYQDNNS025 Type : DNNS025 D For vehicles sold in Canada IC : 1551A−DNNS025 Type : DNNS025 This device complies with part in conjunction with any other antenna or transmitter. The antenna cannot be removed (and changed) by user. Operation is - 2013 Toyota 4Runner | Navigation Manual - Page 157
AUDIO SYSTEM CAUTION Cet équipement est conforme aux limitations sur l'exposition aux radiations IC définies pour un équipement non contrôlé et est conforme avec les directives sur RSS−102 des règles sur l'exposition aux fréquences radio (RF). Cet équipement présente de très faibles niveaux d'é - 2013 Toyota 4Runner | Navigation Manual - Page 158
method is "From Portable Player" Operate the portable player and connect it to the Bluetoothr audio system. For the operation procedure for the portable player, see the instruction manual that comes with it. Touch "Connect". U6033GS Touch "Connect". When the connection is completed, this - 2013 Toyota 4Runner | Navigation Manual - Page 159
AUDIO SYSTEM D Reconnecting the portable player If the portable player is disconnected with a poor reception from the Bluetoothr network when the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode, the system automatically reconnects the portable player. In this case, the connection - 2013 Toyota 4Runner | Navigation Manual - Page 160
AUDIO SYSTEM D Selecting a desired track Some titles may not be displayed depending on the type of portable player. "SEEK/TRACK" the button, the player will resume playing. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. 184 - 2013 Toyota 4Runner | Navigation Manual - Page 161
AUDIO SYSTEM D Selecting a desired album D Other function "Album Y": Touch this button to go to the next album. "Album B": Touch this button to go to the previous album. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. "RPT": - 2013 Toyota 4Runner | Navigation Manual - Page 162
AUDIO SYSTEM - USB memory/iPod operation "RAND": Use this for automatic and random selection of tracks on the album that you are currently listening to. Playing the tracks in the album in random order- While the track is playing, touch "RAND" briefly. "RAND" appears on the screen. The system - 2013 Toyota 4Runner | Navigation Manual - Page 163
AUDIO SYSTEM (a) Connecting a USB memory or iPod (b) Playing a USB memory or iPod D Playing and pausing a file or track " USB memory 1. Open the lid. " iPod Touch "USB" tab - 2013 Toyota 4Runner | Navigation Manual - Page 164
AUDIO SYSTEM D Selecting a play mode (iPod only) INFORMATION D When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. D When the USB memory is connected and the audio source is changed to USB memory mode, the - 2013 Toyota 4Runner | Navigation Manual - Page 165
AUDIO SYSTEM D Selecting a desired folder (USB memory only) : By touching this touch−screen folder. "Select" for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. Touch the desired - 2013 Toyota 4Runner | Navigation Manual - Page 166
AUDIO SYSTEM D Selecting a desired file or track "SEEK/TRACK" button: Use for direct access to a desired file or track. Push either side of the "SEEK/TRACK" button - 2013 Toyota 4Runner | Navigation Manual - Page 167
AUDIO SYSTEM " USB memory Touch the desired file or track number. The changer iPod "Select" for file or track: The desired file or track can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file or track list is displayed. ton, the list - 2013 Toyota 4Runner | Navigation Manual - Page 168
AUDIO SYSTEM D Searching for a desired file (USB memory only) D Searching for a desired folder (USB memory only) Touch "SCAN" on the screen briefly while the music is playing. " - 2013 Toyota 4Runner | Navigation Manual - Page 169
AUDIO SYSTEM D Other function " USB memory " iPod "RPT": Use this control to automatic replay the file or track . "RPT" appears on the screen. When the file or track is finished, the player will automatically play it again. To cancel the repeat, select "RPT" once again. Repeating a folder (USB - 2013 Toyota 4Runner | Navigation Manual - Page 170
"Ɯ" or "Ɲ" switch until you hear a beep to change to the next or the previous disc. Repeat this operation until you reach the disc you want to listen to. Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features - 2013 Toyota 4Runner | Navigation Manual - Page 171
to the audio system: D Be careful not to spill beverages over the audio system. D radio signals have a limited range. The farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems - 2013 Toyota 4Runner | Navigation Manual - Page 172
the radio transmitter. They are often accompanied by distortion. Multi−path - FM signals are reflective, making it possible for two signals to reach your antenna at the XMr Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XMr Satellite Radio. - 2013 Toyota 4Runner | Navigation Manual - Page 173
AUDIO SYSTEM USB memory USB memory that can be used for MP3 and WMA playback D Extremely high temperatures can keep your CD changer from working. On hot days, use the air conditioning to cool the vehicle interior before you use the changer. D Bumpy roads or other vibrations may make your CD changer - 2013 Toyota 4Runner | Navigation Manual - Page 174
damage the changer, or it may be impossible to eject the disc. D This system is not designed for use of Dual Disc. Do not use Dual Disc because it may cause release it. At this time, the audio disc and the map DVD− ROM will be ejected. 6U5B95X " Transparent/translucent discs 6U5B94X " Low quality - 2013 Toyota 4Runner | Navigation Manual - Page 175
AUDIO SYSTEM 6U5B97X 6U5B98X " Correct " Wrong D Handle discs carefully, especially when you are skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away from - 2013 Toyota 4Runner | Navigation Manual - Page 176
AUDIO SYSTEM MP3/WMA FILES D MP3 (MPEG Audio Layer 3) and WMA (Windows Media Audio) are audio compression standards. D WMA tags carry information such as track title, artist name. D The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. Sampling - 2013 Toyota 4Runner | Navigation Manual - Page 177
AUDIO SYSTEM D M3u playlists are not compatible with D D D the audio player. MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player. The player is compatible with 65,025 files in device. D The order changes depending on the PC and MP3/WMA encoding software you use. 201 - 2013 Toyota 4Runner | Navigation Manual - Page 178
AUDIO SYSTEM CD−R and CD−RW discs D CD−R/CD−RW discs that have not been conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot be played using the DDCD (Double Density CD) system. TERMS Packet write- This is a general term that describes the process of writing data on−demand to CD−R, etc - 2013 Toyota 4Runner | Navigation Manual - Page 179
AUDIO SYSTEM m3u- Playlists created using "WINAMP" software have a playlist file extension (.m3u). MP3- MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on - 2013 Toyota 4Runner | Navigation Manual - Page 180
AUDIO SYSTEM 204 - 2013 Toyota 4Runner | Navigation Manual - Page 181
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM 7 D Rear view monitor system ...206 205 - 2013 Toyota 4Runner | Navigation Manual - Page 182
on the screen, place the shift lever in the "R" position when the "ENGINE START STOP" switch is in IGNITION ON mode. If you move the shift mirrors before proceeding. D Do not use the system in the following cases: D On icy or slick road surfaces, or in snow. D When using tire chains or emergency - 2013 Toyota 4Runner | Navigation Manual - Page 183
. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally displayed on the screen may change. INFORMATION If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow, or mud adhere to - 2013 Toyota 4Runner | Navigation Manual - Page 184
REAR VIEW MONITOR SYSTEM D Area displayed on screen Image is displayed approximately level on screen. The area displayed on the screen may vary according to vehicle orientation or road conditions. Corners of bumper The area detected by the camera is limited. The camera does not detect objects - 2013 Toyota 4Runner | Navigation Manual - Page 185
to see the images on the screen, even when the system is functioning. D In the dark (for example, at night snow or mud) is adhering to the camera D When the camera has scratches or dirt on it D When the sun or the beam of headlights is shining directly into the camera lens If a bright light - 2013 Toyota 4Runner | Navigation Manual - Page 186
REAR VIEW MONITOR SYSTEM 210 - 2013 Toyota 4Runner | Navigation Manual - Page 187
the on/off settings of operation sounds and automatic screen change.) D Clock settings ...217 (Used for changing time zones and the on/off settings of can be registered.) D Audio settings ...268 (Settings are available for portable audio devices and Bluetoothr audio devices players.) D Vehicle - 2013 Toyota 4Runner | Navigation Manual - Page 188
. "On" or "Off" can be selected for automatic screen changes from the audio screen to the map. When "On" is selected, the screen will automatically return to the map from the audio screen after 20 seconds. Line color can be changed. (See "D Selecting the line color" on page 214.) 2. Touch "General - 2013 Toyota 4Runner | Navigation Manual - Page 189
measurement" on page 215.) The personal data can be deleted. (See "D Delete personal data" on page 216.) D Selecting a language You can change the language. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 6 7 3. Touch "Language". 4. Touch the desired button. The previous - 2013 Toyota 4Runner | Navigation Manual - Page 190
on the "Setup" screen. D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 3. Touch "Line Color". 3. Touch "Keyboard Layout". 4. Touch the desired color. 4. Touch "ABC" or "QWERTY" of "Keyboard Layout" to choose the - 2013 Toyota 4Runner | Navigation Manual - Page 191
be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page 2 of the "General Settings" screen. " "ABC" type 3. Touch "Unit of Measurement". " "QWERTY" type 4. Select "Kilometer" or "Mile". 5. Touch "Save". INFORMATION This function is available - 2013 Toyota 4Runner | Navigation Manual - Page 192
trace D Phonebook data D Call history data D Speed dial data D Voice tag data D Bluetoothr phone data D Volume setting D Details setting This function is available only when the vehicle is not moving. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch to display page - 2013 Toyota 4Runner | Navigation Manual - Page 193
time. SCREEN FOR CLOCK SETTINGS On this screen, the following functions can be performed. No. 1. Push the "SETUP" button. 1 2 Function Time zone can be changed. (See "D Time zone" on page 218.) "On" or "Off" can be selected for daylight savings time. 2. Touch "Clock". 3. Touch the items to be - 2013 Toyota 4Runner | Navigation Manual - Page 194
guidance can be set. 1. Push the "SETUP" button. 3. Touch "Time Zone". 2. Touch "Voice". 4. Touch the desired time zone. If you touch "Other", adjust the zone manually. 3. Touch the items to be set. 4. Touch "Save". 5. Touch "OK". 218 - 2013 Toyota 4Runner | Navigation Manual - Page 195
during route guidance can be set to "On" or "Off". Voice guidance during audio system use can be set to "On" or "Off". Voice recognition talkback can be set "On" or "Off". When "On" is selected, the speech command system can be operated without pressing the talk switch more than once. When using - 2013 Toyota 4Runner | Navigation Manual - Page 196
guidance You can receive congestion information through voice guidance while being guided to your destination. To turn the "Traffic Voice Guidance" on Voice Guidance". 4. Touch "Save". 4 5 INFORMATION D This function is available only in English. To select English, see "D Selecting a language" on - 2013 Toyota 4Runner | Navigation Manual - Page 197
SETUP Detailed navigation settings Average cruising speed, displayed screen contents, and POI icon categories can be set. 4. Touch the items to be set. 5. Touch "Save". 1. Push the "SETUP" button. 2. Touch "Navi.". 3. Touch "Detailed Navi. Settings". 221 - 2013 Toyota 4Runner | Navigation Manual - Page 198
adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. (See "D Current position/ tire change calibration" . 1 Function Average cruising speed can be set. (See "D Driving speeds" on page 223.) The automatic input function can be set to "On" or "Off". During - 2013 Toyota 4Runner | Navigation Manual - Page 199
the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the guidance route. D The time shown on the - 2013 Toyota 4Runner | Navigation Manual - Page 200
avoid traffic The guidance route automatically changes to another route to avoid heavy congestion. To turn the "Auto Avoid Traffic" on: 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. INFORMATION When the - 2013 Toyota 4Runner | Navigation Manual - Page 201
"Detailed Navi. Settings" on the "Navigation Settings" screen. D POI category change (Select POI icons) Select from among the 6 icons displayed on the "Customize INFORMATION When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing - 2013 Toyota 4Runner | Navigation Manual - Page 202
SETUP D Screen layout function ("AAOff" function) Each touch screen button and current street name on the map screen can be displayed or hidden. 1. Push the "SETUP" button. 2. Touch "Navi." on the "Setup" screen. 3. Touch "Detailed Navi. Settings" on the "Navigation Settings" screen. Then touch to - 2013 Toyota 4Runner | Navigation Manual - Page 203
tire change calibration The current vehicle position mark can be adjusted manually. driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually Limitations of the navigation system" on page 282. 227 - 2013 Toyota 4Runner | Navigation Manual - Page 204
current vehicle position mark. 5. Touch "OK". The map will be displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map will be displayed. 228 - 2013 Toyota 4Runner | Navigation Manual - Page 205
the When the "Pop−up Information" is turned off, the following messages will not be displayed. "Detailed Navi. Settings" screen. This message appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 4. Touch "Pop−up Information". The message appears when the map is - 2013 Toyota 4Runner | Navigation Manual - Page 206
1. Touch "Volume". 1. Push the "SETUP" button. 2. Touch "Phone". 2. Change each setting according to the following procedures. 3. When you complete all settings, touch "Save". Automatic volume settings for high speed The system will automatically increase the volume by one step up when the speed - 2013 Toyota 4Runner | Navigation Manual - Page 207
SETUP D Voice volume setting 1. Touch "Voice Volume". D Initializing the settings You can initialize the settings. 1. Touch "Default". 2. Touch "-" or "+" to adjust the voice volume. 3. Touch "OK". 2. Touch "Yes". D Ring volume setting 1. Touch "Ring Volume". 2. Touch "-" or "+" to adjust the - 2013 Toyota 4Runner | Navigation Manual - Page 208
Registering a Bluetoothr phone 1. Touch "(add new)" to register your cellular phone to the system. 3. Touch "Manage Phone". Please refer to the following pages for each setting. of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". - 2013 Toyota 4Runner | Navigation Manual - Page 209
, this screen is displayed. If you want to disconnect it, touch "Yes". INFORMATION When you register your phone, Bluetoothr audio will disconnect. It will reconnect automatically when you finish registration. It will not be reconnected depending on the phone you are using. When this screen is - 2013 Toyota 4Runner | Navigation Manual - Page 210
phone in the following way. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Manage Phone". 6. Touch "(empty)" to register your cellular phone to the system. The following operations are the same as the operation after you touch "(add new)". 4. Touch "Options". 5. Touch "New Phone". 234 - 2013 Toyota 4Runner | Navigation Manual - Page 211
you have not registered a Bluetoothr phone yet. Although you can register up to 4 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. 2. The "Connect Bluetooth∗" screen is displayed. 1. Select the phone to connect. The Bluetoothr mark is displayed when you connect - 2013 Toyota 4Runner | Navigation Manual - Page 212
the handsfree power You can select the state of "Handsfree Power". This screen is displayed, and the Bluetoothr audio will stop temporarily. When another Bluetoothr device is connected The state changes between "On" and "Off" every time you touch "Handsfree Power". For the "Handsfree Power", see - 2013 Toyota 4Runner | Navigation Manual - Page 213
phone which is displayed on the screen. You can change it into a desired name. If you change a device name, the name registered in your cellular phone is not changed. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr phones with - 2013 Toyota 4Runner | Navigation Manual - Page 214
SETUP D Deleting a Bluetoothr phone 5. Use the software keyboard to input the device name. 1. Touch "Options". 6. Confirm the device name and touch "OK". 2. Touch "Remove Phones". 238 - 2013 Toyota 4Runner | Navigation Manual - Page 215
" and "Handsfree Power Off" (On). The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see "Speech command system -" on page 44.) When you select the command of "Add New Phone", you must carry out the following operation on the screen. 4. Touch - 2013 Toyota 4Runner | Navigation Manual - Page 216
SETUP - Phonebook INFORMATION Phonebook data is managed for every registered phone. When another phone is connecting, you can not read the registered data. "Phonebook" is accessed from the "Phonebook Settings" screen. 1. Push the "SETUP" button. 2. Touch "Phone". - Setting the phonebook "Setting - 2013 Toyota 4Runner | Navigation Manual - Page 217
numbers in your Bluetoothr phone to the system. The phonebook manages a maximum of 4 phonebooks in all. Up to 1000 person's data (up to 3 numbers a person) can be registered in total of phonebooks. Transfer it while the engine is running. 4. Touch "Options". 1. Touch "Transfer Contacts". 5. Touch - 2013 Toyota 4Runner | Navigation Manual - Page 218
phonebook data transferred until then can be memorized in the system. When you have touched "Replace Contacts": If your cellular phone does not support PBAP or OPP service, you can not use this function. If your phone supports PBAP service, you can transfer the phonebook data without operating your - 2013 Toyota 4Runner | Navigation Manual - Page 219
is displayed. If you want to disconnect it, touch "Yes". 1. Touch "New Contact". INFORMATION Bluetoothr audio will disconnect during transfer on phonebook data. In this case, it will reconnect automatically when data transfer finishes. (It will not be reconnected depending the phone you are using - 2013 Toyota 4Runner | Navigation Manual - Page 220
SETUP 3. Input the phone number and touch "OK". If you want to use the tone signal after the phone number, input the tone signal too. 5. When two or less numbers in total are registered to this contact, this screen is displayed. When you want to add a number to this contact, touch "Yes". 4. - 2013 Toyota 4Runner | Navigation Manual - Page 221
SETUP D Editing the phonebook data You can register the phone number in "Phone#1", "Phone#2" and "Phone#3" separately. 1. Touch "Edit Contacts". 3. Touch "Edit" for the desired name or number. 4. Edit the name or the number. (See "D Registering the phonebook data" on page 243.) 5. When you - 2013 Toyota 4Runner | Navigation Manual - Page 222
SETUP You can also display the "Edit Contact" screen in the following ways. From "Contact Data" screen 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. From "Call History" screen 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. - 2013 Toyota 4Runner | Navigation Manual - Page 223
SETUP D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 3. Touch "Yes". 1. Touch "Delete Contacts". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at - 2013 Toyota 4Runner | Navigation Manual - Page 224
SETUP You can also delete it in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 7. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will be deleted at the same time. 5. Touch " - 2013 Toyota 4Runner | Navigation Manual - Page 225
SETUP - Speed dials setting "Speed dials setting" is accessed from the "Speed Dials" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". You can also display the "Speed Dials" screen in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Speed - 2013 Toyota 4Runner | Navigation Manual - Page 226
SETUP D Registering the speed dial You can register the desired phone number from phonebook. Up to 18 numbers per phone can be registered. 3. Touch the desired phone number. 1. Touch "New Speed Dial". 4. Touch the touch−screen button you want to register in. 2. Select the data you want to - 2013 Toyota 4Runner | Navigation Manual - Page 227
SETUP You can also register the speed dial in the following ways. From "Speed Dial" screen 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Speed Dials". 5. If you select a touch−screen button you registered before, this screen is displayed. Touch "Yes" if you want to replace it. 4. - 2013 Toyota 4Runner | Navigation Manual - Page 228
SETUP From "Contact Data" screen 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 6. Select the data you want to register. 5. Touch "Options". 7. Touch the desired phone number. 6. Touch "Set Speed Dial". 252 - 2013 Toyota 4Runner | Navigation Manual - Page 229
SETUP D Editing the speed dial You can edit the speed dial. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 1. Touch "Edit Speed Dials". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 253 - 2013 Toyota 4Runner | Navigation Manual - Page 230
SETUP D Deleting the speed dial You can delete the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Delete Speed Dials". 5. Touch "Save". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 254 - 2013 Toyota 4Runner | Navigation Manual - Page 231
SETUP - Deleting call history You can delete the call history. 3. Touch "Yes". 1. Touch "Delete Call History". 2. Select the desired history to delete. 255 - 2013 Toyota 4Runner | Navigation Manual - Page 232
SETUP You can also delete the call history in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Call History". 3. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 4. Touch "Delete". 4. - 2013 Toyota 4Runner | Navigation Manual - Page 233
SETUP - Setting the voice tag "Setting the voice tag" is done by displaying "Voice Tags" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 3. Touch "Phonebook". You can also display "Voice Tags" screen in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". - 2013 Toyota 4Runner | Navigation Manual - Page 234
Play" to play the voice tag. When you complete the voice tag registration, touch "OK". INFORMATION When you use the voice tag, do not change the language setting from the language setting used when registering. If they are different, the voice recognition can't recognize the voice tag that you have - 2013 Toyota 4Runner | Navigation Manual - Page 235
SETUP You can also register the voice tag in the following way. 1. Push the "INFO·PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" - 2013 Toyota 4Runner | Navigation Manual - Page 236
SETUP D Editing the voice tag D Deleting the voice tag 1. Touch "Edit Voice Tags". 1. Touch "Delete Voice Tags". 2. Select the data you want to edit. 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 3. This - 2013 Toyota 4Runner | Navigation Manual - Page 237
peculiar to the system. You can not change it. If the same device name is displayed on the screen of your phone, refer to it. If you want to change the settings, refer to the following pages. When you change the settings, touch "Save" after changing them. 3. Touch "Bluetooth∗". 4. This screen is - 2013 Toyota 4Runner | Navigation Manual - Page 238
to ACCESSORY or IGNITION ON mode. When "Handsfree Power" is "Off": The Bluetoothr phone is disconnected, and the system will not connect to it next time. You can select the state of "Handsfree Power". On: The auto connection is turned on. Off: The auto connection is turned off. You can not change - 2013 Toyota 4Runner | Navigation Manual - Page 239
Editing the device name 3. Touch "Save". In case that the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 1. Touch "Edit" of "Device Name". 2. Use the software keyboard to input the device - 2013 Toyota 4Runner | Navigation Manual - Page 240
You can initialize the settings. 1. Touch "Edit" of "Passcode". 1. Touch "Default". 2. Input a passcode and touch "OK". 2. Touch "Yes". If the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. 264 - 2013 Toyota 4Runner | Navigation Manual - Page 241
playing while You can do the detail settings. 1. Push the "SETUP" button. 2. Touch "Phone". This screen is displayed, and the Bluetoothr audio will stop temporarily. 3. Touch "Details". 4. Do each setting according to the following procedures. 5. When you complete each setting, touch "Save". 265 - 2013 Toyota 4Runner | Navigation Manual - Page 242
SETUP D Incoming call display You can select the method of the incoming call display. 2. Touch "Full Screen" or "Drop Down". "Full Screen" mode ...When a call is received, the Hands−free screen is displayed and you can operate it on the screen. "Drop Down" mode ...The message is displayed on the - 2013 Toyota 4Runner | Navigation Manual - Page 243
SETUP D The Bluetoothr connection status at start up 1. Touch "Display Phone Status". When the "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON mode and the Bluetoothr is automatically connected, the connection check is displayed. When "Display Phone Status" is "On", this status is - 2013 Toyota 4Runner | Navigation Manual - Page 244
- - Select portable player D Initializing the settings You can initialize the settings. The portable player to connect can be selected. The registered audio information can be confirmed and edited. D Selecting a portable player If you register a second portable player, either one can be selected for - 2013 Toyota 4Runner | Navigation Manual - Page 245
. "Device Name" ...The name of Bluetoothr portable player which is displayed on the screen. You can change it into a desired name. "Device Address" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr portable players with the same device name and you - 2013 Toyota 4Runner | Navigation Manual - Page 246
in your portable player is not changed. D Selecting Connection method The connection method can be selected. From Vehicle: Connect the audio system to the portable player. From Portable Player: Connect the portable player to the audio system. U10004GS U10007GS 1. Touch "Portable Player Info - 2013 Toyota 4Runner | Navigation Manual - Page 247
the operation of the portable player, see the manual that comes with it. If you want to cancel the entry, touch "Cancel". U10009GS U10011GS 2. Touch "Register" of "Bluetooth∗ Audio" on "BT Audio Setting" screen. ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 4. When the connection is - 2013 Toyota 4Runner | Navigation Manual - Page 248
SETUP When another Bluetoothr device is connected (a) Removing a Bluetoothr audio U10013GS 1. Touch "Remove" of "Bluetooth∗ Audio" on "BT Audio Setting" screen. When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it, touch "Yes". - 2013 Toyota 4Runner | Navigation Manual - Page 249
SETUP (b) Connecting Bluetoothr audio AUTOMATICALLY U10016GS U10017GS If the selected portable player is in use, this screen will appear. Touch "Yes". The system will disconnect the portable player and remove it. Touch "On" for "Auto Bluetooth∗ Connect" to activate the automatic connection for the - 2013 Toyota 4Runner | Navigation Manual - Page 250
is in ACCESSORY or IGNITION ON mode, the selected portable player will be automatically connected and the connection result is displayed. MANUALLY When the auto connection fails or turns off, you have to connect Bluetoothr manually. For the manual operation, see page 181. (c) Changing the passcode - 2013 Toyota 4Runner | Navigation Manual - Page 251
U10022GS 2. Touch "Yes". 2. Enter the new device name and touch "OK". INFORMATION The device names are common to Bluetoothr audio and Bluetoothr phone. If you change the device name of the audio, the device name of the phone will change at same time. However, passcodes can be set separately. 275 - 2013 Toyota 4Runner | Navigation Manual - Page 252
SETUP Vehicle Settings - - Maintenance When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components. (See page 27.) D Setting maintenance information (See page 277.) D Setting dealer (See page 278.) 1. Push the "SETUP" button. - 2013 Toyota 4Runner | Navigation Manual - Page 253
touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen. (See page 27.) When the vehicle needs to be serviced, the touch screen button color will change to orange. INFORMATION ITEMS "Engine oil": Replace engine oil "Oil filter": Replace - 2013 Toyota 4Runner | Navigation Manual - Page 254
register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "SETUP Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system - 2013 Toyota 4Runner | Navigation Manual - Page 255
SETUP D To edit "Dealer" or "Contact" 6. Touch "Edit" for the item you want to change. "Dealer": To enter the name of a dealer. (See page 279.) "Contact": To enter the name of a dealer member. (See page 279.) "Location": To set a location. ( - 2013 Toyota 4Runner | Navigation Manual - Page 256
SETUP D To edit "Location" D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch the 8 directional touch to screen button to move the cursor the desired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Enter the - 2013 Toyota 4Runner | Navigation Manual - Page 257
APPENDIX SECTION APPENDIX Appendix 9 D Limitations of the navigation system ...282 D Map database information and updates ...284 Changing the map DVD−ROM ...293 281 - 2013 Toyota 4Runner | Navigation Manual - Page 258
APPENDIX Limitations of the navigation system This navigation system calculates the current vehicle position using satellite signals, various content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on - 2013 Toyota 4Runner | Navigation Manual - Page 259
reroute, the route guidance may not be available for the next turn to the right or left. D It may take a long time to operate auto reroute during high speed driving. In auto reroute, a detour route may be shown. D After auto reroute, the route may not be changed. D An unnecessary U−turn may be shown - 2013 Toyota 4Runner | Navigation Manual - Page 260
Map database information and updates - After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 228.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing tires that are larger or - 2013 Toyota 4Runner | Navigation Manual - Page 261
part of the DATABASE without the prior written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system reverse engineer any portion of the DATABASE. TRANSFER You may not transfer the DATABASE to third parties, except together with the system for - 2013 Toyota 4Runner | Navigation Manual - Page 262
USE OF THE DATABASE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR incomplete information due to the passage of time, changing circumstances, and due to the nature of the ; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special - 2013 Toyota 4Runner | Navigation Manual - Page 263
Agreement, the construction that provides greater limitations on the Government's rights shall control. access and/or reproduction or use of the Licensed Products. In the event that such exemption clause void and unenforceable, in whole or in part, for any reason, this Agreement shall be considered - 2013 Toyota 4Runner | Navigation Manual - Page 264
You may not decompile, disassemble or reverse engineer any portion of this information, and may not transfer or distribute it in any form, for any purpose. Without limiting the foregoing, you may not use this information with any products, systems, or applications installed or otherwise connected to - 2013 Toyota 4Runner | Navigation Manual - Page 265
of them) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney's fees, arising out of or in connection with any use or possession by you of this - 2013 Toyota 4Runner | Navigation Manual - Page 266
exclusive license from the United States Postal ServiceR to publish and sell ZIP+4R information. ©United States Postal ServiceR 2010. Prices are agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it - 2013 Toyota 4Runner | Navigation Manual - Page 267
licensed to do so by DENSO, and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data - 2013 Toyota 4Runner | Navigation Manual - Page 268
anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the - 2013 Toyota 4Runner | Navigation Manual - Page 269
areas in this system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 1. Push the "INFO·PHONE" button. 2. Touch "Map Data". 3. Touch " DVD". The display opens - 2013 Toyota 4Runner | Navigation Manual - Page 270
stopping while driving, keep the DVD−ROM with the label side up. NOTICE D Do not obstruct the display while it is moving. It could damage your navigation system audio disc and the map DVD− ROM will be ejected. 5. Push the "LOAD· /CLOSE" button to close the display. INFORMATION Under extremely cold - 2013 Toyota 4Runner | Navigation Manual - Page 271
APPENDIX D To confirm the database version and disc coverage area D Certification For vehicles sold in Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause - 2013 Toyota 4Runner | Navigation Manual - Page 272
APPENDIX 296 - 2013 Toyota 4Runner | Navigation Manual - Page 273
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching an intersection. These - 2013 Toyota 4Runner | Navigation Manual - Page 274
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other - 2013 Toyota 4Runner | Navigation Manual - Page 275
the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons - 2013 Toyota 4Runner | Navigation Manual - Page 276
following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it - 2013 Toyota 4Runner | Navigation Manual - Page 277
Quick guide - - Overview buttons and guidance screen No. 1 2 3 4 Name North−up or heading−up symbol Scale indicator "INFO·PHONE" button "DEST" button "MAP·VOICE" button Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This - 2013 Toyota 4Runner | Navigation Manual - Page 278
position or the cursor position as a memory point. Touch this button to change the route. Touch this button to browse information about guidance route, to set the destination. XMr NavTraffic mark "GPS" mark (Global Positioning System) This mark is displayed when XMr NavTraffic information is received - 2013 Toyota 4Runner | Navigation Manual - Page 279
- Registering home 1 Push the "DEST" button. U0025FC 2 Touch "Go Home". If home has not been registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 50. 7 - 2013 Toyota 4Runner | Navigation Manual - Page 280
. 6 Touch "OK". Registration of home is complete. You can also register home by pushing the "SETUP" button. (See " (a) Registering home" on page 101.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 102.) 8 - 2013 Toyota 4Runner | Navigation Manual - Page 281
- Registering preset destinations 1 Push the "DEST" button. U0025FC 2 Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset destinations. See " - 2013 Toyota 4Runner | Navigation Manual - Page 282
is complete. You can also register preset destinations by pushing the "SETUP" button. (See " (a) Registering preset destinations" on page 104.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 105.) The registered points can be used on the - 2013 Toyota 4Runner | Navigation Manual - Page 283
- Operation flow: guiding the route 1 Push the "DEST" button. U0025FC 2 There are 10 different methods to search destinations. See "Destination search" on page 50. 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than - 2013 Toyota 4Runner | Navigation Manual - Page 284
has been registered. (To register "Home", see " (a) Registering home" on page 101.) 3 Touch "Go to ". The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 70 - 2013 Toyota 4Runner | Navigation Manual - Page 285
one of the many Points of Interest that have already been stored in the system's database...57 3 "Previous Destinations" A destination can be selected from any of " One of the four categories of emergency service points that are already stored in the system's database can be selected...64 5 13 - 2013 Toyota 4Runner | Navigation Manual - Page 286
be selected without entering the address each time. If "Home" has not been registered, a message will be displayed and the setting screen will automatically appear. To use this function, it is necessary to set a "Home" address. (To register "Home", see "(a) Registering home" on page 101.) ...52 14 - 2013 Toyota 4Runner | Navigation Manual - Page 287
General" Settings are available for language selection, operation sounds, automatic screen change, etc...212 "Clock" Used for changing settings for time available for vehicle information such as maintenance information...276 "Audio" Settings are available for portable audio devices, Bluetoothr audio - 2013 Toyota 4Runner | Navigation Manual - Page 288
. To display the "Information" screen, push the "INFO·PHONE" button. U0023FCa 1 "Phone" To view hands free phone information...126 2 "Fuel Consumption" To view fuel information...141 3 "Map Data" Displays information regarding the map data disc version or coverage area...293 4 "Calendar" To view - 2013 Toyota 4Runner | Navigation Manual - Page 289
17