2013 Toyota Tacoma Regular Cab Owners Manual - Page 705

5-2. Steps to take in an emergency Warning light Warning light/Details Maintenance required reminder light Indicates that maintenance is required according to the driven distance on the maintenance schedule.*2 Illuminates for about 3 seconds and then flashes for about 15 seconds approximately 4500 miles (7200 km) after the maintenance data has been reset. Comes on and remains on if the distance driven exceeds 5000 miles (8000 km) after the maintenance data has been reset. (The indicator will not work properly unless the maintenance data has been reset.) Correction procedure If necessary, perform maintenance. (U.S.A.) Perform the necessary maintenance. Please reset the maintenance data after the maintenance is performed. (→P. 323) *1 : Driver's and front passenger's seat belt buzzer: The driver's and front passenger's seat belt buzzer sounds to alert the driver and front passenger that their seat belt is not fastened. Once the engine switch is turned to the ON or START position, the buzzer sounds for 6 seconds. The buzzer sounds once if the driver's or front passenger's seat belt is unfastened when the vehicle reaches a speed of 12 mph (20 km/h). Then, if the seat belt is still unfastened after 30 seconds elapse, the buzzer will sound intermittently for approximately 10 seconds, followed by a different tone for approximately 20 more seconds. *2 : Refer to the separate "Scheduled Maintenance Guide" or "Owner's Manual Supplement" for the maintenance interval applicable to your vehicle. 408