3M 9550 Operating Guide
3M 9550 Manual
 |
View all 3M 9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
3M 9550 manual content summary:
- 3M 9550 | Operating Guide - Page 1
9000 Series Overhead Projector Operator's Guide Série 9000 Rétroprojecteur Manuel d'utilisation Serie 9000 Retroproyector Manual del Operador - 3M 9550 | Operating Guide - Page 2
, must be replaced by the same type of cable. This power cable can be ordered from your local 3M Visual Systems Division Dealer and must be installed by a serviceman. SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your overhead projector. PR - 3M 9550 | Operating Guide - Page 3
inside the top cover. Service Information In the U.S. and Canada, please call us for -- Product information -- Product assistance -- Technical assistance -- Service locations If you need product assistance or service, contact your dealer or: 800-328-1371 3M 9000 Series Operator's Guide Page 1 - 3M 9550 | Operating Guide - Page 4
Focus the projected image (B). A B 1. Raise projection head (A) up to the maximum (except 9550). 2. Release the post lock (B). 3. Fold down the post. Secure the post in post cradle. 4. Rotate focus knob to minimum (except 9550). 5. Hold to lift projector. Page 2 3M 9000 Series Operator's Guide - 3M 9550 | Operating Guide - Page 5
24V, 275W EVD -- 36V, 400W 9550 only 1. Turn projector off and unplug the power cord. 2. Lift up top cover. ! Lamp and adjacent metal parts are hot. Allow lamp to cool before replacing. 3. Remove and discard the old lamp. See Illustration (A). 4. Install new lamp. 5. Push fully and squarely into - 3M 9550 | Operating Guide - Page 6
, contact your local 3M Visual Systems dealer for assistance. Troubleshooting Problem Probable Causes Solution Lamp does not come on -- fan runs S Lamp is burned out S Replace or change lamp S Lamp is not seated in the socket S Seat lamp all the way in socket S Lamp changer door is open - 3M 9550 | Operating Guide - Page 7
ón del Proyector 78-6969-7217-9 HA5651 Overhead Cleaner Nettoyant pour rétroprojecteur Limpiador de retroproyectores 70-0705-6877-2 Dust Cover Couvercle anti-poussières Cubierta para Polvo 78-6969-7216-1 HA5792 Lamp ENX -- 9050, 9060, 9070, 9080, 9100 Lamp Lampe FXL -- 9075, 9085, 9200
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
9000 Series
Overhead Projector
Operator’s Guide
Série 9000
Rétroprojecteur
Manuel d’utilisation
Serie 9000
Retroproyector
Manual del Operador