AEG L7WE7631BI User Manual
AEG L7WE7631BI Manual
 |
View all AEG L7WE7631BI manuals
Add to My Manuals
Save this manual to your list of manuals |
AEG L7WE7631BI manual content summary:
- AEG L7WE7631BI | User Manual - Page 1
L7WE7631BI EN User Manual Washer Dryer USER MANUAL - AEG L7WE7631BI | User Manual - Page 2
2 www.aeg.com CONTENTS 1. SAFETY INFORMATION 3 2. SAFETY INSTRUCTIONS 6 3. INSTALLATION...7 4. PRODUCT DESCRIPTION 18 5. CONTROL PANEL...18 usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice Register your product for better service: www.registeraeg.com Buy - AEG L7WE7631BI | User Manual - Page 3
. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent - AEG L7WE7631BI | User Manual - Page 4
4 www.aeg.com • This appliance is intended to be used in household and similar switched on and off by a utility. • Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of unwanted gases into the room from appliances burning gas or other fuels, including open - AEG L7WE7631BI | User Manual - Page 5
the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the mains dried in the washer dryer. • Fabric softeners, or similar products, should only be used as specified by the product manufacturer's instructions. • Remove - AEG L7WE7631BI | User Manual - Page 6
and disconnect the mains plug from the socket. 2. SAFETY INSTRUCTIONS 2.1 Installation The installation must comply with relevant national regulations. • Follow the installation instructions supplied with the appliance. • Do not install or use the appliance where the temperature can be less than - AEG L7WE7631BI | User Manual - Page 7
to dry in the washer dryer. Follow the cleaning instruction on the item label. • Plastic items are not heat resistant. - If a detergent ball is used, remove it before starting a drying programme. - Do not use a detergent ball if setting a non-stop programme. 3. INSTALLATION ENGLISH 7 WARNING! Risk - AEG L7WE7631BI | User Manual - Page 8
8 www.aeg.com 3.2 The appliance is equipped with ... A BC DE x4 x2 x1 x1 x1 F G H L x1 x2 x1 x1 x1 x2 3.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the - AEG L7WE7631BI | User Manual - Page 9
ENGLISH 9 3. Remove the polystyrene protection 1 from the bottom. 2 4. Return the appliance in vertical 1 position and remove the socket polystyrene protection. 2 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain - AEG L7WE7631BI | User Manual - Page 10
10 www.aeg.com 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two F bigger caps G in lower holes. G We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.4 Installation on - AEG L7WE7631BI | User Manual - Page 11
ENGLISH 11 The appliance must be level and stable. CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 3.6 Hose and cable connection 1230 mm 1100 mm 1450 mm 960 mm max 1000 mm min. 600 mm min. 600 mm max 1000 mm 900 mm The inlet hose 1360 - AEG L7WE7631BI | User Manual - Page 12
12 www.aeg.com 45O 20O 3. Connect the hose to the back of the appliance. hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement. Water drainage The drain hose can be connected: Ø 40 mm To a - AEG L7WE7631BI | User Manual - Page 13
pipe in the room L wall and tighten it with the supplied cable tie L. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. 3.7 Building in min.600 mm min. 560 mm min. 820 mm 16-22 mm This appliance - AEG L7WE7631BI | User Manual - Page 14
14 www.aeg.com The appliance is also equipped with an adhesive sponge pad H . WARNING! Make sure they are not kinked or squashed. 3.8 Installing anti-tilting device If the height of the counter is 820 mm or lower, you cannot install the antitilting device. 1. Remove the screws of the top cover on - AEG L7WE7631BI | User Manual - Page 15
~10mm ENGLISH 15 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen the nut counterclockwise with a 3mm wrench. Adjust the height and turn the nut clockwise to fix it. 3.9 Preparation and assembly of the cupboard door The dimensions of the cupboard door should - AEG L7WE7631BI | User Manual - Page 16
16 www.aeg.com M If the cupboard door has to be opened from N left to right, invert the position of the hinge supports M with the magnetic plate N and Y should be at the same height of the stroke on the hinge support. Set the position of the lower hole respecting dimensions and distances shown - AEG L7WE7631BI | User Manual - Page 17
door is parallel with the appliance edge and to respect the proper opening angle (max. 105 °C). Mounting the door Fix the hinges to the hinge supports on the appliance by means of the two supplied screws B. The hinges can be adjusted to compensate for possible uneven thickness of the door. Counter - AEG L7WE7631BI | User Manual - Page 18
18 www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Appliance overview 12 3 10 11 12 4 5 6 7 8 9 13 1 Hinge supports 2 Detergent dispenser 3 appliance 2 34 5 NonStop 60min Denim Outdoor Sportswear Anti-allergy Machine Clean Rinse Cottons Cottons Eco Synthetics Delicates Wool/ Handwash Steam Spin - AEG L7WE7631BI | User Manual - Page 19
The permanent options are set by holding pressed the relative button for at least 3 seconds. 1 Programme dial 2 Display 3 Time Dry touch button 4 Auto Dry touch button 5 Start/Pause touch button 6 Delay Start touch button 5.2 Display ENGLISH 19 7 Time Save touch button and permanent Child Lock - AEG L7WE7631BI | User Manual - Page 20
20 www.aeg.com After the ProSense System detection, it flashes when the laundry load exceeds the maximum declared load of the selected programme. Refer to "The ProSense - AEG L7WE7631BI | User Manual - Page 21
for very delicate fabrics. The rinses phase uses more water for some washing programmes • Activate the Rinse Hold option. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum. The - AEG L7WE7631BI | User Manual - Page 22
22 www.aeg.com When setting a steam programme, this button allows to chose three steam levels and the programme duration is reduced accordingly: • : maximum. • : medium. • : minimum. 6.9 Child Lock - AEG L7WE7631BI | User Manual - Page 23
as acrylics, viscose and mixed fabrics requiring gentler washing. Normal soil. Wool/Handwash 40 °C 40 °C - Cold 1.5 kg 1200 rpm (1200 - 400 rpm) Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol2). Steam programme Steam programme can be used for reducing - AEG L7WE7631BI | User Manual - Page 24
24 www.aeg.com Programme Default temperature Temperature range Steam Reference spin speed Save option. WARNING! Do not use this programme with wool and garments labelled as dry-clean only. Spin/Drain Rinse Machine Clean 60 °C 1600 rpm 7 kg (1600 - 400 rpm) 1600 rpm 7 kg (1600- 400 rpm) 1200 rpm - AEG L7WE7631BI | User Manual - Page 25
ENGLISH 25 Programme Default temperature Temperature range Anti-allergy 60 °C Sportswear 30 °C 40 °C - Cold Outdoor 30 °C 40 °C - Cold Reference spin speed Spin speed range Maximum load Programme description (Type of load and soil level) 1600 rpm 7 kg (1600 - 400 rpm) White cotton items. This - AEG L7WE7631BI | User Manual - Page 26
26 www.aeg.com Programme Default temperature Temperature range Reference spin speed Spin speed range Maximum load Programme description (Type of load and soil level) Reset position. The - AEG L7WE7631BI | User Manual - Page 27
labelled as "hand wash" provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M1380 • The wool drying cycle of this machine has been tested and approved by The Woolmark Company. The cycle is suitable - AEG L7WE7631BI | User Manual - Page 28
28 www.aeg.com 7.3 Automatic drying Dryness Level Type of fabric Load 1) Extra Dry For towelling materials Cottons and Linen up to 4 kg (bathrobes, bath towels, etc) Denim - AEG L7WE7631BI | User Manual - Page 29
7.4 Timed drying ENGLISH 29 Dryness Level Type of fabric Load (kg) Spin speed (rpm) Suggested duration (mins) Extra Dry For towelling materials Cottons and Linen (bathrobes, bath towels, etc) 4 1600 2 1600 1 1600 170 - 190 110 - 120 65 - 75 Denim garments 3 1200 155 Cupboard Dry Cottons - AEG L7WE7631BI | User Manual - Page 30
30 www.aeg.com completed, touch the Mode and the Temp. buttons simultaneously for about 2 seconds. The display shows On or Off. 9. BEFORE FIRST USE If risk of water leakage and damage to the laundry. Washing heavily oiled, greasy stains could cause damage to rubber parts of the washing machine. - AEG L7WE7631BI | User Manual - Page 31
other liquid treatments(fabric conditioner, starch). - Maximum level for quantity of liquid additives. - Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level - AEG L7WE7631BI | User Manual - Page 32
32 www.aeg.com Make sure that the flap does not cause a blockage when you close the drawer. 10.5 Setting a programme 1. Turn the programme dial to select the - AEG L7WE7631BI | User Manual - Page 33
Once removed the exceeding garments, touch the Start/Pause button to start the programme again. The ProSense phase can be repeated up to three times (see point 1). Important! If the laundry amount will not be reduced, the washing programme starts anyway, despite the overload. In this case, it will - AEG L7WE7631BI | User Manual - Page 34
34 www.aeg.com The indicator of the Start/Pause button goes off. The door unlocks and the indicator goes off. 1. Press button On/Off to the appliance to remind you to drain the water. 11. DAILY USE - WASHING & DRYING WARNING! Refer to Safety chapters. This appliance is an automatic washer dryer. - AEG L7WE7631BI | User Manual - Page 35
11.1 Complete wash&dry programme Automatic Non-Stop programme or programmes Depending on the model, the appliance may be equipped with one or more NonStop 60min programmes, automatic wash&dry programmes where it is not necessary to set the Mode - Dry. Proceed as follows: 1. After loading laundry and - AEG L7WE7631BI | User Manual - Page 36
36 www.aeg.com 11.4 At the end of the drying programme • The appliance wet cloth. 12. DAILY USE - DRYING ONLY WARNING! Refer to Safety chapters. This appliance is an automatic washer dryer. 12.1 Preparation to drying 1. Press the On/Off button for some seconds to activate the appliance. 2. Load - AEG L7WE7631BI | User Manual - Page 37
Clean the drum, the gasket and the door with a wet cloth. • Set the Machine Clean programme and the Mode - Dry together to activate the anti-fluff action. • white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not wash white and coloured - AEG L7WE7631BI | User Manual - Page 38
aeg very small load can cause balance problems with the spin phase leading to Use" chapter); b. manually redistribute the load so a water softener for washing machines. In areas where the water softener. Follow the instructions that you find on the packaging to installation chapter for more information. - AEG L7WE7631BI | User Manual - Page 39
Use fabric conditioner in the washing cycle. 2. Use special fabric conditioner for tumble dryers. When the drying programme is completed remove the laundry promptly. WARNING! Refer to Safety you use a water descaling product for washing machines. Regularly examine the drum to check for limescale. - AEG L7WE7631BI | User Manual - Page 40
aeg.com Regular detergents already contain water softening agents, but we recommend to run a cycle with an empty drum and a descaling product occasionally. Always follow the instructions Remove all laundry from the drum. 2. Run the Machine Clean programme. For more details, refer to washing programme - AEG L7WE7631BI | User Manual - Page 41
. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. - AEG L7WE7631BI | User Manual - Page 42
42 www.aeg.com Proceed as follows to clean the pump: 2 1 180˚ 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water - AEG L7WE7631BI | User Manual - Page 43
sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 2 9. Put the filter back into the special guides by turning it clockwise. Make sure that you 1 tighten the filter correctly to prevent leakages. - AEG L7WE7631BI | User Manual - Page 44
44 www.aeg.com 2 1 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres - AEG L7WE7631BI | User Manual - Page 45
hose. 16. TROUBLESHOOTING ENGLISH 45 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the - AEG L7WE7631BI | User Manual - Page 46
46 www.aeg.com 16.2 Possible failures Problem Possible solution The programme does not start. the correct position. The water and drains immedi- hose may be positioned too low. Refer to "Installation in- ately struction". The appliance does not drain the water. • Make sure that the sink - AEG L7WE7631BI | User Manual - Page 47
appliance. Contact the Authorised Service Centre. If you need to open the door, please read carefully "Emer- gency door opening". The appliance makes an unusual noise and vibrates. • Make sure the levelling of the appliance is correct. Refer to "Installation instruction". • Make sure that the - AEG L7WE7631BI | User Manual - Page 48
48 www.aeg.com Problem The appliance does not dry or does not dry correctly. The the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes, deactivate and activate the appliance - AEG L7WE7631BI | User Manual - Page 49
4. Take out the laundry and then close the appliance door. 17. CONSUMPTION VALUES ENGLISH 49 Stated values are obtained in laboratory conditions with relevant standards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply - AEG L7WE7631BI | User Manual - Page 50
50 www.aeg.com Water supply pressure Minimum 2) Maximum 0.5 bar (0.05 MPa) 8 bar (0.8 MPa) Maximum wash load Cotton 7 kg Maximum dry load Cotton 4 kg Synthetics 3 kg Spin Speed - AEG L7WE7631BI | User Manual - Page 51
ENGLISH 51 - AEG L7WE7631BI | User Manual - Page 52
www.aeg.com/shop 157019980-B-242018
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
USER
MANUAL
EN
User Manual
Washer Dryer
L7WE7631BI