ASRock CML-HDV/M.2 TPM User Manual

ASRock CML-HDV/M.2 TPM Manual

Get ASRock CML-HDV/M.2 TPM PDF manuals and user guides View all ASRock CML-HDV/M.2 TPM manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock CML-HDV/M.2 TPM manual content summary:

  • ASRock CML-HDV/M.2 TPM | User Manual - Page 1
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 2
    to visit ASRock's website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp ASRock Incorporation e-mail: [email protected] ASRock EUROPE B.V. e-mail: [email protected]
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 3
    Expansion Slots (PCI Express Slots) 17 2.5 Jumpers Setup 18 2.6 Onboard Headers and Connectors 19 2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1) 24 Chapter 3 Software and Utilities Operation 26 3.1 Installing Drivers 26 3.2 ASRock Motherboard Utility (A-Tuning) 27 3.2.1 Installing
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 4
    3.3.3 BIOS & Drivers 34 3.3.4 Setting 35 Chapter 4 UEFI SETUP UTILITY 36 4.1 Introduction 36 4.2 EZ Mode 37 4.3 Advanced Mode 38 4.3.1 UEFI Menu Bar 38 4.3.2 Navigation Keys 39 4.4 Main Screen 40 4.5 OC Tweaker Screen 41 4.6 Advanced Screen 49 4.6.1 CPU Configuration 50 4.6.2
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 5
    installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of TPM Motherboard (Micro ATX Form Factor) • ASRock CML-HDV/M.2 TPM User Manual • ASRock CML-HDV/M.2 TPM Support CD • 1 x I/O Panel Shield • 2 x Serial ATA (SATA)
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 6
    as boot disks • 1 x PCI Express 2.0 x1 Slot Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated. • Supports Intel® UHD Graphics Built-in Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW Encode1
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 7
    Surge Protection LAN • Gigabit LAN 10/100/1000 Mb/s • Giga PHY Intel® I219V • Supports Wake-On-LAN • Supports Lightning/ESD Protection • Supports Energy Efficient Ethernet 802.3az • Supports PXE Rear Panel I/O • 1 x PS/2 Mouse/Keyboard Port • 1 x D-Sub Port • 1 x DVI-D Port • 1 x HDMI Port
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 8
    the water cooler fan of maximum 2A (24W) fan power. • 2 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control) * The Chassis/Water Pump Fan supports the water cooler fan of maximum 2A (24W) fan power. * CPU_FAN2/WP, CHA_FAN1/WP and CHA_FAN2/WP can auto detect if 3-pin or 4-pin fan
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 9
    CML-HDV/M.2 TPM Hardware Monitor OS Certifications • Temperature Sensing: CPU, CPU/Water Pump, Chassis/Water Pump Fans • Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water Pump Fans • Quiet Fan (Auto adjust chassis fan speed by CPU temperature): CPU, CPU/Water Pump, Chassis/Water Pump Fans • Fan
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 10
    1.3 Motherboard Layout 6 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 11
    No. Description 1 ATX 12V Power Connector (ATX12V1) 2 CPU Fan Connector (CPU_FAN1) 3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 4 Chassis/Water Pump Fan Connector (CHA_FAN1/WP) 5 ATX Power Connector (ATXPWR1) 6 USB 3.2 Gen1 Header (USB3_1_2) 7 SATA3 Connector (SATA3_0) (Upper) 8 SATA3 Connector
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 12
    1.4 I/O Panel 1 2 4 3 5 11 10 9 8 7 6 No. Description 1 D-Sub Port 2 PS/2 Mouse/Keyboard Port 3 LAN RJ-45 Port* 4 Line In (Light Blue)** 5 Front Speaker (Lime)** 6 Microphone (Pink)** No. Description 7 USB 2.0 Ports (USB_3_4) 8 USB 2.0 Ports (USB1_2) 9 USB 3.2 Gen1 Ports (USB3_7_8) 10
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 13
    CML-HDV/M.2 TPM 1.5 TPM-SPI Specifications Features • Compliant to TPM Main Specification, Family "2.0", Level 00, Revision 01.16 - SPI interface - TPM 2.0 - 13 pin connector - Meeting Intel TXT, Microsoft Windows and Google Chromebook certification criteria for successful platform qualification
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 14
    Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 15
    CML-HDV/M.2 TPM 2.1 Installing the CPU 1. Before you insert the 1200-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 16
    4 5 12 3 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 17
    CML-HDV/M.2 TPM Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service. 13 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 18
    2.2 Installing the CPU Fan and Heatsink 1 14 2 CPU_FAN English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 19
    CML-HDV/M.2 TPM 2.3 Installing Memory Modules (DIMM) This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 20
    1 2 3 16 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 21
    CML-HDV/M.2 TPM 2.4 Expansion Slots (PCI Express Slots) There are 2 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 22
    2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper is "Open". Clear CMOS Jumper (CLRMOS1) (see p.6, No. 20) 2-pin Jumper Short: Clear CMOS Open: Default CLRMOS1
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 23
    CML-HDV/M.2 TPM 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header (9-pin PANEL1) (see
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 24
    . 10) (Lower) USB 2.0 Headers (9-pin USB3_4) (see p.6, No. 16) (9-pin USB5_6) (see p.6, No. 15) SATA3_2 SATA3_0 SATA3_3 SATA3_1 These four SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate. * If M2_1 is occupied by a SATA-type M.2 device
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 25
    Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 26
    power cable to this connector. SPI_DQ3 SPI_PWR Dummy CLK SPI_MOSI RST# TPM_PIRQ 1 SPI_TPM_CS# GND RSMRST# SPI_MISO SPI_CS0 SPI_DQ2 This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 27
    CML-HDV/M.2 TPM Print Port Header (25-pin LPT1) (see p.6, No. 18) AFD# ERROR# PINIT# SLIN# GND 1 SPD7 SPD6 ACK# SPD5 BUSY SPD4 PE SPD3 SLCT SPD2 SPD1 SPD0 STB# This is an interface for print port cable that allows convenient connection of printer devices. English 23
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 28
    2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (M2_1) supports M Key type 2260/2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen2 x4 (16 Gb/s). * If M2_1 is occupied
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 29
    to secure the module into place. Please do not overtighten the screw as this might damage the module. For the latest updates of M.2 SSD module support list, please visit our website for details: http://www.asrock.com 25
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 30
    CD that comes with the motherboard contains necessary drivers and useful utilities that enhance the motherboard's features. Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive. The CD automatically displays the Main Menu if "AUTORUN" is enabled in your computer
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 31
    CML-HDV/M.2 TPM 3.2 ASRock Motherboard Utility (A-Tuning) ASRock Motherboard Utility (A-Tuning) is ASRock's multi purpose software suite with a new interface, more new features and improved utilities. 3.2.1 Installing ASRock Motherboard Utility (A-Tuning) ASRock Motherboard Utility (A-Tuning) can be
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 32
    System Info View information about the system. *The System Browser tab may not appear for certain models. FAN-Tastic Tuning Configure up to five different fan speeds using the graph. The fans will automatically shift to the next speed level when the assigned temperature is met. 28 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 33
    CML-HDV/M.2 TPM Settings Configure ASRock ASRock Motherboard Utility (A-Tuning). Click to select "Auto run at Windows Startup" if you want ASRock Motherboard Utility (A-Tuning) to be launched when you start up the Windows operating system. 29 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 34
    Shop is an online store for purchasing and downloading software applications for your ASRock computer. You can quickly and easily install various apps and support utilities. With ASRock Live Update & APP Shop, you can optimize your system and keep your motherboard up to date simply with a few clicks
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 35
    CML-HDV/M.2 TPM 3.3.2 Apps When the "Apps" tab is selected, you will see all the available apps on screen for you to download. Installing an App Step 1 Find the app you want to install. The most recommended app appears on the left side of the screen. The other various apps are shown on the right.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 36
    Step 3 If you want to install the app, click on the red icon to start downloading. Step 4 When installation completes, you can find the green "Installed" icon appears on the upper right corner. English To uninstall it, simply click on the trash can icon . *The trash icon may not appear for
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 37
    CML-HDV/M.2 TPM Upgrading an App You can only upgrade the apps you have already installed. When there is an available new version for your app, you will find the mark of "New Version" appears below the installed app icon. Step 1 Click on the app icon to see more details. Step 2 Click on the
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 38
    3.3.3 BIOS & Drivers Installing BIOS or Drivers When the "BIOS & Drivers" tab is selected, you will see a list of recommended or critical updates for the BIOS or drivers. Please update them all soon. Step 1 Please check the item information before update. Click on Step 2 to see more details.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 39
    CML-HDV/M.2 TPM 3.3.4 Setting In the "Setting" page, you can change the language, select the server location, and determine if you want to automatically run the ASRock Live Update & APP Shop on Windows startup. 35 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 40
    Chapter 4 UEFI SETUP UTILITY 4.1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure your system. You may run the UEFI SETUP UTILITY by pressing or right after you power on the computer, otherwise, the Power-On-Self-Test (POST) will continue with its test
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 41
    CML-HDV/M.2 TPM 4.2 EZ Mode The EZ Mode screen appears when you enter the BIOS setup program by default. EZ mode is a dashboard which contains multiple readings of the system's current status. You can check the most crucial information of your system, such as CPU speed, DRAM frequency, SATA
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 42
    4.3 Advanced Mode The Advanced Mode provides more options to configure the BIOS settings. Refer to the following sections for the detailed configurations. To access the EZ Mode, press or click the "EZ Mode" button at the upper right corner of the screen. 4.3.1 UEFI Menu Bar The top of the
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 43
    CML-HDV/M.2 TPM 4.3.2 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press to get into the sub screen. You can also use the mouse to click your required item. Please check
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 44
    4.4 Main Screen When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. The availability and location of BIOS settings can be different for different models and BIOS versions. My Favorite Display your collection of BIOS items. Press F5 to add/remove your
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 45
    4.5 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. CML-HDV/M.2 TPM Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 46
    Intel Speed Shift Technology Enable/Disable Intel Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for controlled P-states. Intel Thermal Velocity Boost Voltage Optimizations This service controls thermal based voltage optimizations for processors that implment the
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 47
    CML-HDV/M.2 TPM DRAM Reference Clock Select Auto for optimized settings. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign the appropriate frequency automatically. Primary Timing CAS# Latency (tCL) The time between sending a column address to
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 48
    RAS to RAS Delay (tRRD_S) The number of clocks between two rows activated in different banks of the same rank. Write to Read Delay (tWTR_L) The number of clocks between the last valid write operation and the next read command to the same internal bank. Write to Read Delay (tWTR_S) The number of
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 49
    tRDRD_dd Configure between module read to read delay. tRDWR_sg Configure between module read to write delay. tRDWR_dg Configure between module read to write delay. tRDWR_dr Configure between module read to write delay. tRDWR_dd Configure between module read to write delay. tWRRD_sg Configure between
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 50
    . ODT WR (B1) Configure the memory on die termination resistors' WR for channel B1. ODT NOM (A1) Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto]. 46 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 51
    ODT NOM (B1) Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto]. ODT PARK (A1) Configure the realtime memory timing changes after MRC_DONE. Command Tristate Configure the Command Tristate Support. Exit On Failure Configure the Exit On Failure for MRC training steps.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 52
    VCCSA Voltage Configure the voltage for the VCCSA. PCH Voltage Configure the chipset voltage. VCCST Voltage Configure the voltage for the VCCST. Save User Default Type a profile name and press enter to save your settings as user default. Load User Default Load previously saved user defaults. Save
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 53
    UEFI setup utility. Full HD UEFI When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor supports Full HD resolution. If the monitor does not support Full HD resolution, then the resolution will be set to 1024 x 768. When [Disable] is selected, the resolution will be set
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 54
    on threaded software is improved. Active Processor Cores Select the number of cores to enable in each processor package. CPU C States Support Enable CPU C States Support for power saving. It is recommended to keep C3, C6 and C7 all enabled for better power saving. Enhanced Halt State (C1E
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 55
    CML-HDV/M.2 TPM Package C State Support Enable CPU, PCIe, Memory, Graphics C State Support for power saving. CFG Lock This item allows you Software Guard Extensions (SGX) Intel SGX is a set of new CPU instructions that can be used by applications to set aside private regions of code and data. 51
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 56
    primary VGA. Above 4G Decoding Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if the system supports 64 bit PCI decoding). VT-d Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor better utilize hardware by improving application
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 57
    This option enables/disables the control of ASPM on CPU side of the DMI Link. PCH DMI ASPM Support This option enables/disables the ASPM support for all PCH DMI devices. Share Memory Configure the size of memory that is allocated to the integrated graphics processor when the system boots up.
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 58
    Deep Sleep Configure deep sleep mode for power saving when the computer is shut down. Restore on AC/Power Loss Select the power state after a power failure. If [Power Off] is selected, the power will remain off when the power recovers. If [Power On] is selected, the system will start to boot up when
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 59
    Link Power Management allows SATA devices to enter a low power state during periods of inactivity to save power. It is only supported by AHCI mode. Hard Disk S.M.A.R.T. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 60
    4.6.4 Super IO Configuration Serial Port Enable or disable the Serial port. Serial Port Address Select the address of the Serial port. Parallel Port Enable or disable the Parallel port. Change Settings Select the address of the Parallel port. Device Mode Select the device mode according to your
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 61
    to RAM Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI S3 power saving. PS/2 Keyboard S4/S5 Wakeup Support Allow the system to be waked up by a PS/2 Keyboard in S4/S5. PCIE Devices Power On Allow the system to be waked up by
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 62
    USB Mouse Power On Allow the system to be waked up by an USB mouse. 58 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 63
    4.6.6 USB Configuration CML-HDV/M.2 TPM Legacy USB Support Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB compatibility issues it is recommended to disable legacy USB support. Select UEFI Setup Only to support USB devices under the UEFI setup and Windows/Linux
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 64
    4.6.7 Trusted Computing Security Device Support Enable or disable BIOS support for security device. 60 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 65
    4.7 Tools CML-HDV/M.2 TPM UEFI Tech Service Contact ASRock Tech Service if you are having trouble with your PC. Please setup network configuration before using UEFI Tech Service. SSD Secure Erase Tool All the SSD's listed that supports Secure Erase function. NVME Sanitization Tool After you
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 66
    Internet Flash - DHCP (Auto IP), Auto ASRock Internet Flash downloads and updates the latest UEFI firmware version from our servers for you. Please setup network configuration before using Internet Flash. *For BIOS backup and recovery purpose, it is recommended to plug in your USB pen drive before
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 67
    CML-HDV/M.2 TPM 4.8 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, fan speed and voltage. Fan Tuning Measure Fan Min Duty Cycle. Fan-Tastic Tuning Select a
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 68
    CPU Fan 2 Control Mode Select PWM mode or DC mode for CPU_FAN2. CPU Fan 2 Setting Select a fan mode for CPU_FAN2, or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature. CPU Fan 2 Temp Source Select a fan temperature source for CPU_FAN2. CPU Fan 2 Step
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 69
    CML-HDV/M.2 TPM Chassis Fan 2 Setting Select a fan mode for CHA_FAN2, or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature. Chassis Fan 2 Temp Source Select a fan temperature source for Chassis Fan 2. Chassis Fan 2 Step Up Set the value of Chassis Fan
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 70
    settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password. Secure Boot Use this item to enable or disable support for Secure Boot. 66 English
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 71
    priority. Fast Boot Fast Boot minimizes your computer's boot time. In fast mode you may not boot from an USB storage device. The VBIOS must support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 72
    If the computer fails to boot for a number of times the system automatically restores the default settings. CSM (Compatibility Support Module) CSM Enable to launch the Compatibility Support Module. Please do not disable unless you're running a WHCK test. Launch PXE OpROM Policy Select UEFI only to
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 73
    CML-HDV/M.2 TPM Launch Storage OpROM Policy Select UEFI only to run those that support UEFI option ROM only. Select Legacy only to run those that support legacy option ROM only. Select Do not launch to not execute both legacy and UEFI option ROM. Other PCI Device ROM Priority For PCI devices
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 74
    4.11 Exit Screen Save Changes and Exit When you select this option the following message, "Save configuration changes and exit setup?" will pop out. Select [OK] to save changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option the following message, "Discard
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 75
    Version 1.0 Published September 2022 Copyright©2022 ASRock INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 76
    in, and licensed in accordance with, an enclosed license.txt file or other text or file. (e) Intel has no obligation to provide any support, technical assistance or updates for the Software. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 77
    U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1
  • ASRock CML-HDV/M.2 TPM | User Manual - Page 78
    WARNING THIS PRODUCT CONTAINS A BUTTOON BATTERY If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78