ASRock H67M-ITX/HT User Manual

ASRock H67M-ITX/HT Manual

ASRock H67M-ITX/HT manual content summary:

  • ASRock H67M-ITX/HT | User Manual - Page 1
    H67M-ITX/HT H67M-ITX User Manual Version 1.0 Published January 2011 Copyright©2011 ASRock INC. All rights reserved. 1
  • ASRock H67M-ITX/HT | User Manual - Page 2
    purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights , USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock H67M-ITX/HT | User Manual - Page 3
    Motherboard Layout (H67M-ITX/HT 12 1.4 Motherboard Layout (H67M-ITX 13 1.5 I/O Panel (H67M-ITX/HT 14 1.6 I/O Panel (H67M-ITX 15 1.7 Remote Receiver and Remote Controller (H67M-ITX/HT 16 1.8 WiFi-802.11n Module and ASRock WiFi 2.4GHz Antenna (H67M-ITX/HT Guide 36 2.16 Driver Installation Guide
  • ASRock H67M-ITX/HT | User Manual - Page 4
    Health Event Monitoring Screen 56 3.6 Boot Screen 57 3.7 Security Screen 58 3.8 Exit Screen 59 4 Software Support 60 4.1 Install Operating System 60 4.2 Support CD Information 60 4.2.1 Running Support CD 60 4.2.2 Drivers Menu 60 4.2.3 Utilities Menu 60 4.2.4 Contact Information 60 4
  • ASRock H67M-ITX/HT | User Manual - Page 5
    / H67M-ITX Motherboard (Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm) ASRock H67M-ITX/HT / H67M-ITX Quick Installation Guide ASRock H67M-ITX/HT / H67M-ITX Support CD 2 x Serial ATA (SATA) Data Cables (Optional) 1 x I/O Panel Shield 1 x 3D Red/Cyan Anaglyph Glasses (Optional) 1 x Remote
  • ASRock H67M-ITX/HT | User Manual - Page 6
    (see CAUTION 2) - 2 x DDR3 DIMM slots - Supports DDR3 1333/1066 non-ECC, un-buffered memory - Max. capacity of system memory: 16GB (see CAUTION 3) - 1 x PCI Express 2.0 x16 slot (blue @ x16 mode) - 1 x Mini-PCI Express expansion slot: For WiFi module (H67M-ITX/HT) * Requires a Processor with Intel
  • ASRock H67M-ITX/HT | User Manual - Page 7
    LAN Wireless LAN (H67M-ITX/HT) Rear Panel I/O SATA3 USB3.0 Connector - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL8111E - Supports Wake-On-LAN - Supports LAN Cable Detection - Supports Energy Efficient Ethernet 802.3az WiFi-802.11n module - 300Mbps IEEE 802.11n / 54Mbps IEEE 802.11g / 11Mbps
  • ASRock H67M-ITX/HT | User Manual - Page 8
    , CPU PLL, VTT, VCCSA Voltage Multi-adjustment Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), ASRock Software Suite (CyberLink DVD Suite - OEM and Trial; Creative Sound Blaster X-Fi MB - Trial (H67M-ITX)) Unique Feature - ASRock Extreme Tuning Utility (AXTU) (see CAUTION
  • ASRock H67M-ITX/HT | User Manual - Page 9
    ! 1. About the setting of "Hyper Threading Technology", please check page 47. 2. This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 23 for proper installation. 3. Due to the
  • ASRock H67M-ITX/HT | User Manual - Page 10
    AIWI utility either from ASRock official website or ASRock software support CD to your motherboard, and also download the free AIWI Lite from App store to your iPhone/iPod touch. Connecting your PC and apple devices via Bluetooth or WiFi networks, then you can start experiencing the exciting motion
  • ASRock H67M-ITX/HT | User Manual - Page 11
    regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to Intel
  • ASRock H67M-ITX/HT | User Manual - Page 12
    Motherboard Layout (H67M-ITX/HT BIOS Intel 1 COM1 WiFi-802.11n 1 CLRCMOS1 Module 14 H67 H67M-ITX/HT PCIE1 16 17 Top: LINE IN Center: FRONT Bottom: MIC IN 20 19 18 1 System Panel Header (PANEL1, White) 14 WiFi 4), Blue) 17 1155-Pin CPU Socket 6 SATA2 Connector H67 Chipset 11 ATX Power
  • ASRock H67M-ITX/HT | User Manual - Page 13
    1.4 Motherboard Layout (H67M-ITX) 12 3 4 56 7 8 9 10 11 12 17.0cm (6.7 in) PLED PWRBTN 1 HDLED RESET SATA_0 (port 0) SATA_3 (port 5) 1 1 1 USB6_7 USB8_9 AT X P W R 1 1 SPEAKER1 PS2 Keyboard 22 21 USB 2.0 T: USB0 B: USB1 PANEL1 PLED1 1 CHA_FAN1 SATA_1 (port 1) CPU_FAN1 64Mb BIOS
  • ASRock H67M-ITX/HT | User Manual - Page 14
    1.5 I/O Panel (H67M-ITX/HT) 1 2 34 58 69 7 10 16 15 14 13 12 11 1 USB 2.0 Ports (USB01) 2 VGA/D-Sub Port 3 USB 2.0 Ports (USB23) * 4 LAN RJ-45 Port 5 Central / Bass (Orange) 6 Rear Speaker (Black) 7 Optical SPDIF Out Port 8 Line In (Light Blue) ** 9 Front Speaker (Lime) 10 Microphone (
  • ASRock H67M-ITX/HT | User Manual - Page 15
    1.6 I/O Panel (H67M-ITX) 1 2 34 58 69 7 10 15 14 1 USB 2.0 Ports (USB01) 2 VGA/D-Sub Port 3 USB 2.0 Ports (USB23) * 4 LAN RJ-45 Port 5 Central / Bass (Orange) 6 Rear Speaker (Black) 7 Optical SPDIF Out Port 8 Line In (Light Blue) 13 12 11 ** 9 Front Speaker (Lime) 10 Microphone (
  • ASRock H67M-ITX/HT | User Manual - Page 16
    Controller (H67M-ITX/HT) H67M-ITX/HT is bundled with one Remote Receiver and one Remote Controller. You can enjoy more of your favorite entertainment by MCE (Media Center Edition) Remote Controller. The MCE features the entertainment center which allows you to enjoy a more convenient way of power on
  • ASRock H67M-ITX/HT | User Manual - Page 17
    -802.11n Module and ASRock WiFi 2.4GHz Antenna (H67M-ITX/HT) WiFi-802.11n module is an easy-to-use wireless local area network (WLAN) adapter to support WiFi function. With WiFi-802.11n module, you can easily create a wireless environment and enjoy the convenience of wireless network connectivity
  • ASRock H67M-ITX/HT | User Manual - Page 18
    WiFi-802.11n module supports Station mode. You can use the wireless function to module in Infrastructure mode. In this mode, WiFi-802.11n module acts as a wireless adapter. In other words, it is centered on an AP that provides Internet access and LAN communication for the wireless stations, such as
  • ASRock H67M-ITX/HT | User Manual - Page 19
    This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do
  • ASRock H67M-ITX/HT | User Manual - Page 20
    Socket Body 1155-Pin Socket Overview Before you insert the 1155-Pin CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket 2. This cap must be placed if returning the motherboard for after service. 20
  • ASRock H67M-ITX/HT | User Manual - Page 21
    Heat Sink) up. Locate Pin1 and the two orientation key notches. orientation key notch alignment key Pin1 Pin1 orientation key notch 1155-Pin CPU alignment key 1155-Pin Socket For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of
  • ASRock H67M-ITX/HT | User Manual - Page 22
    Heatsink This motherboard is equipped with 1155-Pin socket that supports Intel 1155-Pin CPU. instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for 1155-Pin CPU. Step 1. Apply thermal interface material onto center of IHS on the socket
  • ASRock H67M-ITX/HT | User Manual - Page 23
    . 3. Some DDR3 1GB double-sided DIMMs with 16 chips may not work on this motherboard. It is not recommended to install them on this motherboard. Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot
  • ASRock H67M-ITX/HT | User Manual - Page 24
    (H67M-ITX/HT) on this motherboard. PCIE slots: PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width graphics cards. MINI_PCIE1 (Mini-PCIE slot; White) is used for WiFi module. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power
  • ASRock H67M-ITX/HT | User Manual - Page 25
    VGA card to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub and HDMI to support dual VGA output so VGA/DVI-D port HDMI port 2. If you have installed onboard VGA driver from our support CD to your system already, you can freely enjoy the benefits of
  • ASRock H67M-ITX/HT | User Manual - Page 26
    Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (DVI-D, D-Sub is inserted to this motherboard. 4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to your system. If you have installed the drivers already, there is
  • ASRock H67M-ITX/HT | User Manual - Page 27
    function is supported on this motherboard. To use HDCP function with this motherboard, you need to adopt the monitor that supports HDCP function as well. Therefore, you can enjoy the superior display quality with high-definition HDCP encryption contents. Please refer to below instruction for more
  • ASRock H67M-ITX/HT | User Manual - Page 28
    Receiver Installation Guide This motherboard is equipped with a 4-pin CIR header (CIR1, see page 12/13, No. 9), which is used to connect the Remote Receiver. Please refer to below procedure for installing the Remote Receiver. 1. Find the CIR header located next to the USB 2.0 header (USB8_9, see
  • ASRock H67M-ITX/HT | User Manual - Page 29
    setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you
  • ASRock H67M-ITX/HT | User Manual - Page 30
    damage of the motherboard! Serial ATAII (SATAII) connectors support SATA data cables ATA3 (SATA3) connectors support SATA data cables for SATAII / SATA3 connector on this motherboard. USB 2.0 Headers (9-pin USB6_7 motherboard. Each USB 2.0 header can support two USB 2.0 ports. This header can
  • ASRock H67M-ITX/HT | User Manual - Page 31
    allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel
  • ASRock H67M-ITX/HT | User Manual - Page 32
    GND 1 2 3 4 Please connect the CPU fan cable to the connector and match the black wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin
  • ASRock H67M-ITX/HT | User Manual - Page 33
    No. 11) 12 13 Please connect an ATX power supply to this connector. 1 Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13
  • ASRock H67M-ITX/HT | User Manual - Page 34
    adopts Intel® H67 chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Rapid Storage) functions. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to
  • ASRock H67M-ITX/HT | User Manual - Page 35
    and in working condition. 2.14 Hot Plug and Hot Swap Functions for SATA3 HDDs This motherboard supports Hot Plug and Hot Swap functions for SATA3 in RAID / AHCI mode. Intel® H67 chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SATA host
  • ASRock H67M-ITX/HT | User Manual - Page 36
    installed into system properly. The latest SATA / SATAII / SATA3 driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash
  • ASRock H67M-ITX/HT | User Manual - Page 37
    do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SATA / SATAII / SATA3 HDD damage and data loss. Step 1 Please connect SATA power cable 1x4-pin end Step 2 Connect SATA data cable to (White) to the power supply 1x4-pin cable. the motherboard's SATAII
  • ASRock H67M-ITX/HT | User Manual - Page 38
    2.16 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those
  • ASRock H67M-ITX/HT | User Manual - Page 39
    to install Windows® XP / XP 64-bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow below steps. AHCI mode is not supported under Windows® XP / XP 64-bit OS. Using SATA / SATAII / SATA3 HDDs without NCQ function STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced
  • ASRock H67M-ITX/HT | User Manual - Page 40
    motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press or during the Power-On-Self-Test software is constantly being updated, the following UEFI setup screens OC Tweaker To set up overclocking features Advanced To set up
  • ASRock H67M-ITX/HT | User Manual - Page 41
    Screen or exit the current screen 3.2 Main Screen When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. H67M-ITX/HT 41
  • ASRock H67M-ITX/HT | User Manual - Page 42
    H67M-ITX 42
  • ASRock H67M-ITX/HT | User Manual - Page 43
    overclocking features. Load GPU EZ OC Setting Use this item to load GPU EZ overclocking setting. Please note that overclocking may cause damage to your GPU and motherboard Windows® XP and select [Auto], you need to set the "Power Schemes" as "Portable/Laptop" to enable this function. If you install
  • ASRock H67M-ITX/HT | User Manual - Page 44
    Use this item to adjust Turbo Boost power limit. Configuration options: [Auto] and [Manual]. The default value is [Auto]. Core Current Limit Use this item to add voltage when CPU is in Turbo mode. DRAM Timing Control DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module
  • ASRock H67M-ITX/HT | User Manual - Page 45
    Four Activate Window (tFAW) Use this item to change Four Activate Window (tFAW) Auto/Manual setting. The default is [Auto]. Memory Power Down Mode Use this item to adjust DDR power down mode. Configuration options: [Auto], [Slow] and [Fast]. The default value is [Auto]. Voltage Control DRAM Voltage
  • ASRock H67M-ITX/HT | User Manual - Page 46
    ASRock Instant Flash ASRock Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update tool allows you to update to your USB flash drive, floppy disk or hard drive, then you can update your UEFI only in a few clicks without preparing an additional floppy diskette or other
  • ASRock H67M-ITX/HT | User Manual - Page 47
    or Linux kernel version 2.4.18 or higher. This option will be hidden if the installed CPU does not support Hyper-Threading support the Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset. In the C1 power
  • ASRock H67M-ITX/HT | User Manual - Page 48
    Protection" can prevent data pages from being used by malicious software to execute code. This option will be hidden if the current CPU does not support No-Excute Memory Protection. Local x2APIC Use this to enable or disable Local x2APIC. The default value is [Disabled]. Please be noted that some OS
  • ASRock H67M-ITX/HT | User Manual - Page 49
    Mode]. DVMT (Dynamic Video Memory Technology) is an architecture that offers breakthrough performance for the motherboard through efficient memory utilization. In DVMT mode, the graphics driver allocates memory as needed for running graphics applications and is cooperatively using this memory with
  • ASRock H67M-ITX/HT | User Manual - Page 50
    3.4.3 North Bridge Configuration Low MMIO Align Low MMIO resources align at 64MB/1024MB. The default value is [64MB]. VT-d Use this to enable or disable Intel® VT-d technology (Intel® Virtualization Technology for Directed I/O). The default value of this feature is [Disabled]. Primary Graphics
  • ASRock H67M-ITX/HT | User Manual - Page 51
    starts to boot up when the power recovers. Deep Sx Mobile platforms support Deep S4/S5 in DC only and desktop platforms support Deep S4/S5 in AC only. Configuration options: [Disabled], [Enabled in S5] and [Enabled in S4 and S5]. The default value is [Disabled]. Onboard LAN This allows you to enable
  • ASRock H67M-ITX/HT | User Manual - Page 52
    mode. Configuration options: [IDE Mode], [AHCI Mode] and [RAID Mode]. The default value is [AHCI Mode]. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages. SATA Controller 0 Please select
  • ASRock H67M-ITX/HT | User Manual - Page 53
    3.4.6 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Configuration options: [Auto], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3]. 53
  • ASRock H67M-ITX/HT | User Manual - Page 54
    Suspend-toRAM feature. Select [Auto] will enable this feature if the OS supports it. PS/2 Keyboard Power On Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode. PCI Devices Power On Use this item to enable or disable PCI devices to turn on
  • ASRock H67M-ITX/HT | User Manual - Page 55
    issue, it is recommended to select [Disabled] to enter OS. [UEFI Setup Only] - USB devices are allowed to use only under UEFI setup and Windows / Linux OS. Legacy USB 3.0 Support Use this option to enable or disable legacy support for USB 3.0 devices. The default value is [Disabled]. 55
  • ASRock H67M-ITX/HT | User Manual - Page 56
    Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan Setting This allows you to set the CPU fan speed. Con
  • ASRock H67M-ITX/HT | User Manual - Page 57
    please select [Enabled]. Configuration options: [Enabled] and [Disabled]. The default value is [Enabled]. Boot From Onboard LAN Use this item to enable or disable the Boot From Onboard LAN feature. Boot Failure Guard Enable or disable the feature of Boot Failure Guard. Boot Failure Guard Count Enable
  • ASRock H67M-ITX/HT | User Manual - Page 58
    3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. 58
  • ASRock H67M-ITX/HT | User Manual - Page 59
    3.8 Exit Screen Save Changes and Exit When you select this option, it will pop-out the following message, "Save configuration changes and exit setup?" Select [OK] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, it will pop-out the following
  • ASRock H67M-ITX/HT | User Manual - Page 60
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • ASRock H67M-ITX/HT | User Manual - Page 61
    Installing OS on a HDD Larger Than 2TB This motherboard is adopting UEFI BIOS that allows Windows® OS to be installed on a large install Windows® 7 64-bit OS, OS will be formatted by GPT (GUID Partition Table). Please install the hotfix file from Microsoft®: http://support.microsoft.com/kb/979903 61
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

1
H67M-ITX/HT
H67M-ITX
User Manual
Version 1.0
Published January 2011
Copyright©2011 ASRock INC. All rights reserved.