Acer 5100-5033 Service Guide - Page 86

Error Message List Error Message Monitor type does not match CMOS - Run Setup Shadow RAM Failed at offset: nnnn System RAM Failed at offset: nnnn Extended RAM Failed at offset: nnnn System battery is dead Replace and run Setup System CMOS checksum bad Default configuration used System timer error Real time clock error Previous boot incomplete Default configuration used Memory size found by POST differed from CMOS Diskette drive A error Incorrect Drive A type - run Setup System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Allocation Error for device FRU/Action in Sequence Run Load Default Settings in BIOS Setup Utility. BIOS ROM System board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility. See External Diskette Drive Check. Check the drive is defined with the proper diskette type in BIOS Setup Utility. System board System board DIMM System board DIMM System board DIMM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Chapter 4 77