Acer AR320 F2 Acer AR320 F2 Server Service Guide - Page 38
Expansion, Installation, Removal
View all Acer AR320 F2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PCI Expansion Card Installation / Removal Acer AR320 F2 has one bus slots with of two separate bus segments: PCI16X - PCI-E x16 slot Install the expansion card 1. Lift the riser bracket slightly, then pull it out from the server chassis. 2. Insert the card into the selected slot and secure the expansion card with screw. Make sure that the card is properly seated. NOTE: Do not discard the slot cover. If the expansion card is removed in the future, the slot cover must be reinstalled to maintain proper system cooling. NOTE: Remove the expansion card from its protective packaging, handling it by the edges. 3. Attach the expansion slot card on the riser bracket and secure it with screws 4. Insert the card into the selected slot. Make sure that the card is properly seated.. 5. Connect the necessary cables to the expansion card as required 34