Acer AT110 F2 Acer AT110 F2 Service Guide - Page 34

PCI Expansion Card Installation / Removal Acer AT110 F2 has four bus slots with of three separate bus segments: PCIE1 -- PCI Express x16 slots PCIE2 -- PCI Express x8 slot PCIE3 -- PCI Express x4 slot PCIE4 -- PCI 32/33MHz slot Install the expansion card 1. 2. Press the release latch of the slot cover opposite the selected expansion slot. Pull out the slot cover and store it for reassembly later. NOTE: Do not discard the slot cover. If the expansion card is removed in the future, the slot cover must be reinstalled to maintain proper system cooling. NOTE: Remove the expansion card from its protective packaging, handling it by the edges. 3. 4. Insert the card into the selected slot. Make sure that the card is properly seated. Press the release latch to secure the card in place. 5. Connect the necessary cables to the expansion card as required. 30