Acer AT310 F2 Acer AT310 F2 Server Service Guide - Page 36

Hard Disk Drive Installation / Removal Below is the instruction of HDD installation and removal SOP. 1. Press the release button 2. Pull the blank out of the drive bay. 3. Slide hard disk into blank. 4. Secure the HDD with four screws. Make sure the HDD is seated securely in the HDD blank. 5. Connect the necessary power cable. To connect power cable. Firstly, remove the HDD carrier. Note!! Make sure that the drive is properly inserted before pushing the handle back until it clicks into Place. 32