Acer Altos 500 Altos 500 Service Guide - Page 49

Reconfiguring the System Reconfigure the system after installing or removing DIMMs. Follow these steps to reconfigure the system: 1. Reboot the system. A memory error message appears, indicating that the total memory does not match the value stored in CMOS. 2. Press + +. 3. Press twice to exit Setup and reboot the system. The system boots with the new memory configuration. Installing Expansion Cards Installing PCI Cards To install PCI cards: 1. Locate the PCI slots on the system board. 2. Remove the bracket on the housing opposite an empty PCI slot. 3. Insert a PCI card into the slot. Make sure that the card is properly seated. BIOS Utility 2-17