Acer Altos 500 Altos 500 Service Guide - Page 52

Follow these steps when installing an AGP card: 1. Locate the AGP slot on the mainboard. 2. Insert an AGP card into the slot. Make sure that the card is properly seated. When you turn on the system, BIOS automatically detects and assigns resources to the AGP device. BIOS detects and configures only PnP cards. Error Messages Do not continue using the computer if you receive an error message of any type. Note the message and take corrective action. This section describes the types of error messages and lists their corresponding corrective measures. There are two general types of error messages: • Software 2-20 Altos 500 System Guide