Acer Altos 500 Altos 500 Service Guide - Page 68

IDE Primary Channel Slave This parameter lets you configure the hard disk drive connected to the slave port of IDE channel 1. IDE Secondary Channel Master This parameter lets you configure the hard disk drive connected to the master port of IDE channel 2. IDE Secondary Channel Slave This parameter lets you configure the hard disk drive connected to the slave port of IDE channel 2. The following screen appears if you select any of the IDE Drive parameters: IDE Primary/Secondary Channel Master/Slave Type Auto ] Cylinder XXXX ] Head XXXX ] Sector XXXX ] Size XXXX ] MB Hard Disk Size > 504MB .........[ Auto ] *Hard Disk Block Mode Auto ] *Advanced PIO Mode Auto ] *Hard Disk 32-bit Access ........[Enabled ] *DMA Transfer Mode Auto] *CD-ROM Drive DMA Mode ..........[Disabled] 3-12 The above parameters marked with '*' will only appear if you access the advanced configuration level in the Main Menu. Please refer to the Entering Setup section for more information. Type Altos 500 System Guide