Acer Altos 500 Altos 500 Service Guide - Page 76
Power Management Mode
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Power Management The Power Management menu allows you to configure the system power-management feature. The following screen shows the Power Management parameters and their default settings: Power Management Power Management Mode Enabled] IDE Hard Disk Standby Timer ......... [Off] System Sleep Timer Off] Sleep Mode Power Switch < 4 sec Suspend] System Wake-up Event Modem Ring Indicator Enabled] Power Management Mode This parameter allows you to reduce power consumption. When this parameter is set to Enabled, you can configure the IDE hard disk and system timers. Setting it to Disabled deactivates the power-management feature and its timers. IDE Hard Disk Standby Timer This parameter allows the hard disk to enter standby mode after inactivity of 1 to 15 minutes, depending on your setting. When you access the hard disk again, allow 3 to 5 seconds (depending on the hard disk) for the disk to return to normal speed. Set this parameter to OFF if your hard disk does not support this function. 3-20 Altos 500 System Guide