Acer Altos 500 Altos 500 Service Guide - Page 78

Boot Options This option allows you to specify your preferred setting for bootup. The following screen appears if you select Boot Options from the Basic Configuration menu: Boot Options Boot Sequence 1st [Floppy Disk] 2nd [Hard Disk ] 3rd [IDE CD-ROM ] First Hard Disk Drive IDE] Fast Boot Auto] Silent Boot Enabled] Num Lock After Boot Enabled] Memory Test Enabled] *Configuration Table Enabled] Boot from LanDesk Service Agent ....... [Disabled] The above parameter marked with '*' will only appear if you access the advanced configuration level in the Main Menu. Please refer to the Entering Setup section for more information. Boot Sequence This parameter allows you to specify the boot search sequence during POST. • 1st. The system checks this drive first. • 2nd. The system then checks this drive if it can not boot from the 1st specified drive. • 3rd. If the 1st and 2nd searches fail then it boots from this drive. 3-22 Altos 500 System Guide