Acer Altos 500 Altos 500 Service Guide - Page 80
Memory Test, Configuration Table, Boot from LANDesk Service Agent
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Memory Test When set to Enabled, this parameter allows the system to perform a RAM test during the POST routine. When set to Disabled, the system detects only the memory size and bypasses the test routine. The default setting is Enabled. Configuration Table This parameter allows you to enable or disable the appearance of the configuration table after POST but before booting. The configuration table gives a summary of the hardware devices and settings that BIOS detected during POST. Boot from LANDesk Service Agent When set to Enabled, the system boots from a LANDesk Service Agent network instead of your desktop system. The LANDesk Service Agent is IEEE-standards-based code that intervenes in the boot process. Please refer to your LANDesk Manual for more information. When set to Disabled, the system boots from the drive specified in the Boot Sequence parameter. 3-24 Altos 500 System Guide