Acer Altos T350 F4 User Manual

Acer Altos T350 F4 Manual

Acer Altos T350 F4 manual content summary:

  • Acer Altos T350 F4 | User Manual - Page 1
    User's Guide Altos T350 F4
  • Acer Altos T350 F4 | User Manual - Page 2
    Thank you for purchasing your Acer server. This user guide is intended as a reference for experienced server technicians and Before opening or removing any components please contact your local certified Acer service representative Warning: Any parts or components damaged during replacement by a non
  • Acer Altos T350 F4 | User Manual - Page 3
    System component identification Altos T350 F4 System Front View: ⑩ ⑤ ① ⑥ ⑦ ⑧ ② ③ ⑨ 12 ④ 11 Front I/O Ports 1 Power Button 2 Alarm Mute 3 System Reset 4 USB Ports 5 Power Status LED 6 HDD Activity LED 7 LAN Activity LED 8 LAN
  • Acer Altos T350 F4 | User Manual - Page 4
    Altos T350 F4 System Rear View: ① ② ③ ④ ⑤ Rear Chassis Features 1 Power Supply Units Up to two power supply units are supported 2 System Fan Outlet 3 I/O Ports The I/O rear panel is located here. 4 Expansion Slots 5 Kensington Lock
  • Acer Altos T350 F4 | User Manual - Page 5
    Setting up the system Pre-installation requirements Selecting a site Before unpacking and installing the system, select a suitable site for the system for maximum efficiency. Consider the following factors when choosing a site for the system:  Near a grounded power outlet.  Clean and dust-free 
  • Acer Altos T350 F4 | User Manual - Page 6
    status indicator on the front panel lights up blue.  The Num Lock, Caps Lock and Scroll Lock indicators on the keyboard light up. Power-on problems If the system fails to boot after you have applied power, check the following factors that might have caused the boot failure.  The external power
  • Acer Altos T350 F4 | User Manual - Page 7
    Note: If you have gone through the preceding actions and the system still fails to boot, ask your dealer or a qualified technician for assistance.
  • Acer Altos T350 F4 | User Manual - Page 8
    Turning off the system There are two ways to turn off the server-via software or via hardware. The software procedure below applies to a system running on a Windows OS. For other shutdown procedures, refer to the related user documentation. To turn off the system via software: 1. Press +
  • Acer Altos T350 F4 | User Manual - Page 9
    Resetting the system Before going through in-depth troubleshooting, attempt first to reset the system using one of the methods below. Perform Soft boot Cold boot Purpose To clear the system memory and reload
  • Acer Altos T350 F4 | User Manual - Page 10
    usually caused by an incorrect installation or configuration. Hardware failure is a less possible cause. If the problem you are experiencing is with a specific application. Initial troubleshooting checklist  AC power is available at the wall outlet?  Is the power supply module properly installed
  • Acer Altos T350 F4 | User Manual - Page 11
    Hardware diagnostic testing This section provides a detailed approach to identifying a hardware problem and its cause. Checking the boot-up status Caution: Before disconnecting any peripheral cables from the server, turn off the system and any peripheral devices.
  • Acer Altos T350 F4 | User Manual - Page 12
    is successful, install the cards back in one at a time with a reboot between each addition to determine if one of them is causing the problem.  Make sure that you have properly installed system compliant memory modules, and that they are populated according to the system guidelines.  Make sure
  • Acer Altos T350 F4 | User Manual - Page 13
     Check that relevant switches and jumpers on the hard drive and on the backplane board are set correctly. Optical drive activity indicator does not light Do the following:  Make sure the SATA and power cables are properly connected.  Check that relevant switches and jumpers on the drive are set
  • Acer Altos T350 F4 | User Manual - Page 14
    is properly configured for the system.  Refer to the software installation and operation documentation for instructions on setting up and using the software. Try a different version of the software to see if the problem is with the copy you are using. If the other version runs correctly on the
  • Acer Altos T350 F4 | User Manual - Page 15
    3. Reboot the system for the changes to take effect. 4. If there are still no characters on the screen after you reboot the system, reboot it again. Take note of the beep codes emitted during POST. This information may be required if you seek technical assistance. If POST does not emit any beep code
  • Acer Altos T350 F4 | User Manual - Page 16
    Notices Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning
  • Acer Altos T350 F4 | User Manual - Page 17
     Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.  To avoid damage of internal components and to prevent
  • Acer Altos T350 F4 | User Manual - Page 18
     the product has been dropped or the case has been damaged  the product exhibits a distinct change in performance, indicating a need for service  the product does not operate normally after following the operating instructions Notes:Adjust only those controls that are covered by the operating
  • Acer Altos T350 F4 | User Manual - Page 19
    Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
  • Acer Altos T350 F4 | User Manual - Page 20
    Regulations and safety notices Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.
  • Acer Altos T350 F4 | User Manual - Page 21
    installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Acer Altos T350 F4 | User Manual - Page 22
    Caution Changes or modifications not expressly approved by the manufacture could void the user's authority, which is granted by the Federal Communications Commision Commission, to operate this computer. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

User
’s
Guide
Altos T350 F4