Acer Aspire 2930 Aspire 2930 / 2930Z / 2430 Service Guide - Page 136

Power On Issue - boot failure

Page 136 highlights

Power On Issue If the system doesn't power on, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. 1. Check the power cable is properly connected to the computer and the electrical outlet. 2. Remove any extension cables between the computer and the outlet. 3. Remove any surge protectors between the computer and the electrical outlet. Plug the computer directly into a known good electrical outlet. 4. Disconnect the power and open the casing to check the Thermal Unit (see "Thermal Unit Failure" on page 140) and fan airways are free of obstructions. 5. Disable the power management settings in the BIOS to ensure they are not the cause of the problem (see "Power" on page 31). 6. Remove all external and non-essential hardware connected to the computer that are not necessary to boot the computer to the failure point. 7. Remove any recently installed software. 8. If the Issue is still not resolved, see "Online Support Information" on page 235. 126 Chapter 4

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.